Search NASA⌕ Search

SEARCH · Search NASA

Results for “Factor Analysis, Statistical”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Using Self-Organizing Maps to Identify Coherent CONUS Precipitation Regions

Extreme precipitation events have major societal impacts. These events are rare and can have small spatial scale, making statistical analysis difficult; both factors are mitigated by combining events over a region. A methodology is presented to objectively define “coherent” regions wherein data points have matching annual cycles. Regions are found by training self-organizing maps (SOMs) on the annual cycle of precipitation for each grid point across the contiguous United States (CONUS). Using the annual cycle for our intended application minimizes problems caused by consecutive dry periods and localized extreme events. Multiple criteria are applied to identify useful numbers of regions for our future application. Criteria assess these properties for each region: having many more events than experienced by a single grid point, good connectedness and compactness, and robustness to changing the number of regions. Our methodology is applicable across datasets and is tested here on both reanalysis and gridded observational data. Precipitation regions obtained align with large-scale geographical features and are readily interpretable. Useful numbers of regions balance two conflicting preferences: larger regions contain more events and thereby have more robust statistics, but more compact regions allow weather patterns associated with extreme events to be aggregated with confidence. For 6-h precipitation, 12–15 regions over the CONUS optimize our metrics. The regions obtained are compared against two existing region archetypes. For example, a popular set of regions, based on nine groups of states, has less coherent regions than defining the same number of regions with our SOM methodology.

54 ENVIRONMENTAL SCIENCES↗

Failure diagnosis and trend‐based performance losses routines for the detection and classification of incidents in large‐scale photovoltaic systems

Abstract Fault detection and classification in photovoltaic (PV) systems through real‐time monitoring is a fundamental task that ensures quality of operation and significantly improves the performance and reliability of operating systems. Different statistical and comparative approaches have already been proposed in the literature for fault detection; however, accurate classification of fault and loss incidents based on PV performance time series remains a key challenge. Failure diagnosis and trend‐based performance loss routines were developed in this work for detecting PV underperformance and accurately identifying the different fault types and loss mechanisms. The proposed routines focus mainly on the differentiation of failures (e.g., inverter faults) from irreversible (e.g., degradation) and reversible (e.g., snow and soiling) performance loss factors based on statistical analysis. The proposed routines were benchmarked using historical inverter data obtained from a 1.8 MWp PV power plant. The results demonstrated the effectiveness of the routines for detecting failures and loss mechanisms and the capability of the pipeline for distinguishing underperformance issues using anomaly detection and change‐point (CP) models. Finally, a CP model was used to extract significant changes in time series data, to detect soiling and cleaning events and to estimate both the performance loss and degradation rates of fielded PV systems.

14 SOLAR ENERGY↗

Alpha Air Sample Counting Efficiency Versus Dust Loading: Evaluation of a Large Data Set

Dust loading on air sample filters is known to cause a loss of efficiency for direct counting of alpha activity on the filters, but the amount of dust loading and the correction factor needed to account for attenuated alpha particles is difficult to assess. In this paper, correction factors are developed by statistical analysis of a large database of air sample results for a uranium and plutonium processing facility at the Savannah River Site. As is typically the case, dust-loading data is not directly available, but sample volume is found to be a reasonable proxy measure; the amount of dust loading is inferred by a combination of the derived correction factors and a Monte Carlo model. The technique compares the distribution of activity ratios [beta/(beta + alpha)] by volume and applies a range of correction factors on the raw alpha count rate. The best-fit results with this method are compared with MCNP modeling of activity uniformly deposited in the dust and analytical laboratory results of digested filters. Finally, a linear fit is proposed to evenly-deposited alpha activity collected on filters with dust loading over a range of about 2 mg cm -2 to 1,000 mg cm -2 .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Statistical Significance Testing for Mixed Priors: A Combined Bayesian and Frequentist Analysis

In many hypothesis testing applications, we have mixed priors, with well-motivated informative priors for some parameters but not for others. The Bayesian methodology uses the Bayes factor and is helpful for the informative priors, as it incorporates Occam’s razor via the multiplicity or trials factor in the look-elsewhere effect. However, if the prior is not known completely, the frequentist hypothesis test via the false-positive rate is a better approach, as it is less sensitive to the prior choice. We argue that when only partial prior information is available, it is best to combine the two methodologies by using the Bayes factor as a test statistic in the frequentist analysis. We show that the standard frequentist maximum likelihood-ratio test statistic corresponds to the Bayes factor with a non-informative Jeffrey’s prior. We also show that mixed priors increase the statistical power in frequentist analyses over the maximum likelihood test statistic. We develop an analytic formalism that does not require expensive simulations and generalize Wilks’ theorem beyond its usual regime of validity. In specific limits, the formalism reproduces existing expressions, such as the p-value of linear models and periodograms. We apply the formalism to an example of exoplanet transits, where multiplicity can be more than 10 7 . We show that our analytic expressions reproduce the $p$-values derived from numerical simulations. We offer an interpretation of our formalism based on the statistical mechanics. We introduce the counting of states in a continuous parameter space using the uncertainty volume as the quantum of the state. We show that both the $p$-value and Bayes factor can be expressed as an energy versus entropy competition.

97 MATHEMATICS AND COMPUTING↗

Statistical analysis of historic hydrocarbon production data from Gulf of Mexico oil and gas fields and application to dynamic capacity assessment in CO 2 storage

Numerical modeling of CO 2 injection and reservoir flow is typically performed to forecast the number of wells, sustainable injection rates, and total storage volume (or mass). A critical determination for CO 2 storage in depleted oil and gas reservoirs is characterization of reservoir compartmentalization which informs boundary conditions in simulating injection scenarios. Constraining boundary conditions during CO 2 injection into geological formations is a key factor for feasible deployment project. Production history data from 616 wells in 100 oil and gas fields from Gulf of Mexico (GOM) offshore basin can be used to evaluate boundary conditions and total production (oil and gas) and therefor constrain the capacity for potential carbon storage. In general, the combination of decline curve analysis and statistical analysis (to specify constraining boundary conditions) allows the determination of the range of reservoir performance if existing inactive production wells in GOM area of study are used reversibly for CO 2 injection. To constrain the mass of CO 2 which can be injected, it is useful to consider estimates of cumulative bulk (hydrocarbon + brine) production (CBP), which can be converted to equivalent CO 2 mass considering reservoir conditions. Summary CBP statistics are presented as a probability of non-exceedance (PNE), providing a forecast of likely injection rates and masses for other located CO 2 storage projects with similar geology and boundary conditions in the future. The 50% PNE for Equivalent CO 2 is a novel quantitative approach to investigate the possible injection capacity in CO 2 storage projects. The PNE sensitivity analysis shows that reservoir age, drive mechanism, reservoir trap, and reservoir porosity are the key controlling parameters for productivity and consequently optimum CO 2 storage capacity. Furthermore another key finding is the negligible correlation between CBP with reservoir transmissivity and porosity, which implies that other factors than just petrophysical parameters should be studied as constraining factors for CO 2 storage statistical analysis.

42 ENGINEERING↗

Quantitative resilience evaluation on recovery from emergency situations in nuclear power plants

Here, this paper mainly introduces how to develop a resilience evaluation model by quantifying the relationship between resilience and resilience components in regard to recovering from emergency situations in nuclear power plants (NPPs). It is an extension of the author’s previous researches. To develop the model, the first step was to analyze event reports published in Republic of Korea in terms of resilience factors from different safety perspectives. Second, statistical methods such as factor analysis, principal component analysis, and multivariate regression analysis were applied to the dataset to identify relations among resilience factors and develop a quantitative resilience evaluation model for recovery from emergency situations in NPPs. Third, the model was validated using the recent event report data released in Korea. Lastly, we present a discussion on how to apply the quantitative resilience evaluation model to results from stress tests performed in Korea.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Riders’ perceptions towards transit bus electrification: Evidence from Salt Lake City, Utah

While battery electric buses (BEBs) can lead to energy savings and reduced emissions, BEB adoption is developing slowly. Although BEBs offer quieter operations, better acceleration, and no smell of diesel or gas fumes, little focus has been placed on the user’s perspective. Here, this study investigates bus riders’ preferences toward BEBs. To achieve these objectives, a survey was designed and administered to solicit riders’ typical travel behaviors and patterns as well as preferences and opinions about BEBs’ performance in terms of emissions and noise. Statistical analysis showed that several factors influence rider perceptions towards transit bus electrification that include trip purpose, attitudes towards environmental issues and environmental impacts of BEBs, and certain non-instrumental ride factors such as ride comfort and social image. A better understanding of the importance of electrification to transit riders can help transit service providers adjust their marketing decisions and their systemwide operations to accommodate preferences towards BEBs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Conductivity space isotherm behavior in quantum anomalous Hall devices

The quantum Hall effect (QHE) has enhanced accessibility to measure and disseminate electrical units, owed in part to the recently redefined International System of Units in 2019. Graphene remains one of the preferred options to realize the ohm despite the limitations of high magnetic fields to produce a robust QHE. Topological insulators, on the other hand, show promise in providing quantized resistance via the quantum anomalous Hall effect, a phenomenon that removes the need for magnetic fields during operation. To optimize future devices for metrological applications, it is important to gain a better understanding of magnetically doped topological insulators like Cr-doped bismuth antimony telluride. The application of differential conductivity space analyses offers a more sensitive way to analyze the data and distinguish between 2D and 3D transport behaviors. This is particularly important in thin films, where the transition between 2D and 3D behavior can be subtle. The ability to confidently determine the dimensionality of the transport is crucial for selecting appropriate theoretical models for future device optimization. Furthermore, this work identifies variable range hopping as the dominant transport mechanism in the 2D regime using a rigorous statistical analysis (via the Bayes factor). These elements assist in the understanding of microscopic processes that govern charge transport in these materials.

Tran, N. T. M. [National Inst. of Standards and Te↗

Methane Emissions Produced by Pneumatic Devices and Produced Water Tanks on Natural Gas Wellsites

In recent years, more scrutiny has been placed on the release of greenhouse gasses (GHGs) by the oil and gas industry in North America as climate concerns increase. In the coming years, stricter regulations proposed by the Environmental Protection Agency (EPA) concerning the release of GHGs will further direct attention to GHG emissions quantification, modeling, and overall reduction. Active natural gas wellsites employ production equipment that routinely emits methane during normal operation. Production equipment often includes, but is not limited to, gas production units (GPUs), pneumatic controllers (PCs) and actuators powered by produced natural gas, and produced water storage tanks. This work details direct methane emission measurements taken at active natural gas wellsites originating from intermittent pneumatic controllers and produced water storage tanks. Efforts to model methane flows originating from these sources are also detailed, and those results are compared to direct measurement. The direct methane emissions measurement campaign collected flow data from two active dry wellsites in the Marcellus shale region. These measurement campaigns captured, in total, several weeks of continuous data from these sites. Data included multiple pneumatic device vent flowrate channels, a single channel monitoring total emissions vented from the produced water storage tanks, and corresponding site weather data. Periodic composition measurements were taken from flows vented from produced water tanks. Computational modeling efforts attempted to mimic a given site’s methane emissions behavior given limited input parameters. Direct measurement data and simulation data yielded, through reduction and analysis, apparent methane emissions factors, statistics on pneumatic device actuation events, important relationships between GPU parameters and pneumatic device actuation events, produced water storage tank vent flows and flow compositions, and parameters most contributing to the magnitude and frequency of these fugitive methane emissions. Measurements, considering data from a 72hr period, produced PC emissions factors from 0.008 to 0.03 SCFH per device with an average device emitting 0.026 SCFH at the first site. The second site produced PC emissions factors spanning from 0.05 to 25.47 SCFH with an average device emitting 1.93 SCFH not including the 25.47 SCFH device, which was assumed to be malfunctioning. Two unique water tank emission measurements were made, 618 g CH4 per hour and 32.6 g CH4 per hour. On a water basis, the water tank emissions factors were 0.66 and 0.042 kg CH4 per bbl of water, respectively.

03 NATURAL GAS↗

A transmission electron microscopy study of EBR-II neutron-irradiated austenitic stainless steel 304 and nickel-base alloy X-750

The microstructure of EBR-II neutron-irradiated austenitic stainless steel 304 and nickel-base alloy X-750 was investigated. Both alloys were irradiated at low dose rates (~2 × 10 -8 dpa/s) to a neutron fluence of 6.9 × 10 22 n/cm 2 (E > 0.1 MeV) at 371–389 °C. Different types of defects, including Frank loops, cavities, and γ' precipitates were characterized. The Frank loops in Type 304 stainless steel (SS) are larger in size (~50 nm in diameter) and lower in number density (2.58 × 10 21 m -3 ), compared to most previous higher dose rate neutron irradiation studies. The Frank loops in X-750 have an average size 26.0 nm of and a number density of 9.44 × 10 21 m -3 . In 304 SS and X-750, cavities are of ~20 nm and ~14 nm in diameter, respectively. The swelling of both alloys was found to be insignificant. In 304 SS, Ni and Si were found enriched at the cavity surfaces and Ni,Si-rich precipitates were also found. Multivariate statistical analysis using non-negative matrix factorization reveals that these Ni,Si-rich precipitates contain only ~5.7 at.% Si, differing from the Ni 3 Si γ' precipitates found in several previous studies. In X-750, L1 2 -structured γ' precipitates were found, and multivariate statistical analysis confirmed the 3:1 stoichiometry (Ni 3 (Ti,Al)) of the precipitates and the superlattice reflections confirmed the stability of the crystal structure of these γ' precipitates, indicating higher-than-expected precipitate stability under high-dose neutron irradiation.

36 MATERIALS SCIENCE↗

Assessment of Potential Ergonomic Injury Risk in the Nuclear Material Processing Glovebox Environment [Capstone Project]

Gloveboxes are isolation barriers that are used within many different industries such as pharmaceuticals, electronic parts fabrication, nuclear, and biological. The research on glovebox ergonomics is currently limited with few ergonomic professionals that focusing exclusively on glovebox working environments. There is existing documentation on occupational injuries, such as musculoskeletal disorders (MSD), sustained as a direct result of working in gloveboxes. The main elements that pose ergonomic risks to glovebox workers are operational repetition, duration, force, vibration, lifting heavy (more than 15lbs with two hands) objects, and awkward postures. This paper examines a small sample of the potential causal or risk factors that lead to the ergonomic injuries. A meta-analysis utilizing a random effect model is used to examine data from several studies which focus on, dexterity and strength changes as result of glove thickness, and robotic assistive technology as a means to improve postural mechanics. With the meta-analysis technique, similar data sets from different research studies can be coalesced into a single weighted, statistically significant result for subsequent consideration. The results from the analysis show that increased glove thickness results in decreased dexterity for operators thus increasing ergonomic risk factors such as task duration. It is also shown that glove thickness decreases grip strength but a similar decrease in pinch strength is not definitively demonstrated. With decreased grip strength, operators will need to exert more force (a known ergonomic risk factor) on processing tools, etc. during operations thus increasing the risk of ergonomic injury. The use of robotic assistive technology as a means to improve operator posture (risk factor) was also examined. Although it may be intuitively assumed that human-robotic collaboration would be beneficial in reducing risk factors, the result from this study’s analysis was not statistically significant. It is inferred that with additional directed research on this topic another study/analysis could be statistically significant demonstrating the benefits of the technology.

99 GENERAL AND MISCELLANEOUS↗

Retention of LDR Inorganics in Solidified/Immobilized Waste

This report provides a summary of the laboratory data and statistical analysis used to calculate retention factors in solidified/stabilized Hanford tank waste for the 13 LDR inorganic species associated with Hanford tank waste (SRNL-STI-2020-00228). The data presented is a summary of the results of research performed to build a correlation between the untreated waste concentration and the TCLP response of a solidified/stabilized waste form. This report establishes the efficacy of two treatment technologies found in 40 CFR 268.42, CHRED (chemical reduction) and STABL (stabilization), that are key to the Sample-and-Send strategy.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Injury severity analysis of truck-involved crashes under different weather conditions

This paper investigates truck-involved crashes to determine the statistically significant factors that contribute to injury severity under different weather conditions. The analysis uses crash data from the state of Ohio between 2011 and 2015 available from the Highway Safety Information System. To determine if weather conditions should be considered separately for truck safety analyses, parameter transferability tests are conducted; the results suggest that weather conditions should be modeled separately with a high level of statistical confidence. To this end, three separate mixed logit models are estimated for three different weather conditions: normal, rain and snow. The estimated models identify a variety of statistically significant factors influencing the injury severity. Different weather conditions are found to have different contributing effects on injury severity in truck-involved crashes. Rural, rear-end and sideswipe crash parameters were found to have significantly different levels of impact on injury severity. Based on the findings of this study, several countermeasures are suggested: 1) safety and enforcement programs should focus on female truck drivers, 2) a variable speed limit sign should be used to lower speeds of trucks during rainy condition, and 3) trucks should be restricted or prohibited on non-interstates during rainy and snowy conditions. These countermeasures could reduce the number and severity of truck-involved crashes under different weather conditions.

60 APPLIED LIFE SCIENCES↗

Role of underlying surface, rainstorm and antecedent wetness condition on flood responses in small and medium sized watersheds in the Yangtze River Delta region, China

Floods are becoming more frequent and are hard to control due to the shortage of water conservancy projects in small and medium sized basins, especially in developing regions. Understanding the hydrologic responses and estimated flood characteristics to storm events can help to predict flood disasters and form better effective mitigation and adaptation strategies. Here, using observations of several representative watersheds and Artificial Neural Networks (ANN) and Principal Component Regression (PCR) models, we conducted data-driven analyses to examine the flood responding characteristics. We quantified the relative contributions of the influencing factors to the variation of each flood characteristic. Statistical analysis of the observations shows that the drainage area plays a key role in determining the distribution of lag time and peak discharge. Rainstorm variability has direct influence on floods, and typhoon-induced rainstorms with high total rainfall and rainfall intensity generate higher lag time, flood peak, unit discharge and runoff depth, but lower runoff coefficient. The ANN and PCR models accurately predicted the variations of flood features using the driving factors including physical geographical characteristics, rainstorm features, and antecedent condition. Physical geographic characteristics are key influential factors of lag time, flood peak and runoff coefficient, while the rainstorm features control the magnitude of unit discharge and runoff depth. These results indicate that floods are mainly affected by rainstorm features and physical geographic characteristics in the Yangtze River delta, and it might become more damaging with the increasing rainfall extremes and sprawling impervious surfaces in a changing environment.

54 ENVIRONMENTAL SCIENCES↗

Measurement of the neutron cross section on argon between 95 and 720 MeV

We report an extended measurement of the neutron cross section on argon in the energy range of 95-720 MeV. The measurement was obtained with a 4.3-hour exposure of the Mini-CAPTAIN detector to the WNR/LANSCE beam at LANL. Compared to an earlier analysis of the same data, this extended analysis includes a reassessment of systematic uncertainties, in particular related to unused wires in the upstream part of the detector. Using this information we doubled the fiducial volume in the experiment and increased the statistics by a factor of 2.4. Here we also shifted the analysis from energy bins to time-of-flight bins. This change reduced the overall considered energy range, but improved the understanding of the energy spectrum of incoming neutrons in each bin. Overall, the new measurements are extracted from a fit to the attenuation of the neutron flux in five time-of-flight regions: 140ns-180ns, 120ns-140ns, 112ns-120ns, 104ns-112ns, 96ns-104ns. The final cross sections are given for the flux-averaged energy in each time-of-flight bin with statistical and systematic (syst) uncertainties: σ(146 MeV) = 0.60 $^{+0.14}_{-0.14}$ ±0.08(syst) b, σ(236 MeV) = 0.72 $^{+0.10}_{-0.10}$ ± 0.04(syst) b, σ(319 MeV) = 0.80 $^{+0.13}_{-0.12}$ ±0.040(syst) b, σ(404 MeV) = 0.74 $^{+0.14}_{-0.09}$ ±0.04(syst) b, σ(543 MeV) = 0.74 $^{±0.09}_{-0.09}$ ± 0.04(syst) b.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A spatial-statistical investigation of surface expressions associated with cyclic steaming in the Midway-Sunset Oil Field, California

In the Midway Sunset Oil Field in Central California, operators inject steam into the shallow diatomite formation to enhance heavy oil recovery through imbibition, wettability alteration, and viscosity reduction, among other mechanisms. The injected steam, however, does not always remain in the reservoir or return through the wells. In two zones in the study area, the steam comes out at the surface, creating sinkholes, seeps, and steam outlets. These phenomena, called “surface expressions,” pose safety and environmental hazards. Even though these surface expressions are a widespread problem in Central California, they are not well documented and understood. Possible causes of the surface expressions include: high injection pressure, structurally controlled flow patterns, leakage of steam through old improperly abandoned wells, high injection volumes, or flow along naturally occurring faults, among other possible factors. This work examines attributes of the zones with surface expressions in order to determine factors that may contribute to their occurrence. Spatial statistical analysis using logistic regression, random forests, and classification trees is used to explore the relationship between the surface expressions and geological and production-related attributes. The results point to a significant spatial correlation between the surface expressions and two predictors: concentration of plugged wells and geologic seal thickness. The results guide follow-up studies to further investigate the role of well abandonment and seal thickness in the occurrence of surface expressions.

02 PETROLEUM↗

Femoral Fracture in Primary Soft-Tissue Sarcoma of the Thigh and Groin Treated with Intensity-Modulated Radiation Therapy: Observed versus Expected Risk

Purpose: This study was designed to compare the observed risk of femoral fracture in primary soft-tissue sarcoma (STS) of the thigh/groin treated with intensity-modulated radiation therapy (IMRT) to expected risk calculated using the Princess Margaret Hospital (PMH) nomogram. Methods: Expected femoral fracture risk was calculated by using the PMH nomogram. Cumulative risk of fracture was estimated by using Kaplan–Meier statistics. Prognostic factors were assessed with univariate and multivariate analysis using Cox’s stepwise regression. Results: Between February 2002 and December 2010, 92 consecutive eligible patients were assessed. Median follow-up was 73 months (106 months in surviving patients). IMRT was delivered preoperatively (50 Gy) in 13 (14%) patients and postoperatively in 79 (86%) patients (median dose, 63 Gy; range, 59.4–66.6 Gy). The observed crude risk of fractures was 6.5% compared with 25.6% expected risk from the nomogram; the cumulative risk of fracture using IMRT at 5 years was 6.7% (95% CI 2.8–16.0%). The median time to fracture was 23 months (range, 6.9–88.6). Significant predictors of fracture on univariate analysis were age ≥ 60 years (p = 0.03), tumor location in the anterior thigh (p = 0.008), and periosteal stripping to > 20 cm (p < 0.0001). On multivariate analysis, age ≥ 60 years and periosteal stripping > 20 cm retained significance (p = 0.04 and p = 0.009, respectively). Conclusions: In this study, the cumulative risk of femur fracture in patients treated with IMRT (6.7%) is less than the expected risk using the PMH nomogram (25.6%). Established predictors of femur fracture, such as gender, tumor size, and dose of RT, seem to have less impact on fracture risk when using IMRT.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

User Acceptance of Shared Autonomous Vehicles

A dissertation is proposed to explore user acceptance of shared autonomous vehicles (SAVs). SAVs are facing limited user acceptance. To systematically tackle the user acceptance barriers of SAVs, the main problem can be disintegrated into two sub-problems of user acceptance of autonomous vehicles (AVs) and ridesharing. The comfort of the ride experience in AVs is a determinant of user acceptance. Understanding the influential factors and developing methodologies to quantify human comfort in AVs are essential to facilitating future research to improve human comfort in AVs. The current pooled rideshare (PR) service closely resembles the anticipated future of SAVs. Understanding why users prefer or refuse to use PR at the current stage prepares SAVs for broader acceptance in the future. Until now, a series of peer-reviewed publications have been published to achieve the technical goals. Two simulator-based user studies were conducted to instrument the research on human comfort in AVs. Statistical analysis was performed to identify the crucial vehicular behavioral factors of human comfort in AVs. The influential factors of human comfort in AVs and methodologies to quantify and detect human comfort in AVs were investigated. Two survey-based studies were deployed to facilitate the investigation of user acceptance of rideshare services. The influential factors of users' willingness to consider PR were explored and identified, and the choice behaviors in ridesharing services were comprehensively modeled and analyzed. The proposed research answers a series of fundamental questions regarding the user acceptance of SAVs. For the branch of user acceptance of AVs, the research generated guidelines for improving passenger comfort in AVs by identifying a series of autonomous driving factors of passenger comfort. The research also provides fundamental tools to estimate human comfort levels for future research and in-AV applications. For the branch of user acceptance of PR, the research provided user acceptance-aware vehicle, service, and policy design insights that can promote the usage of PR.

Su, Haotian↗