Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fe-doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Dilute magnetic impurity-induced effective phonon magnetic moment in Fe-doped monolayer MoS 2

Realization of large effective phonon magnetic moment in monolayer MoS 2 has established an important route for exploring intriguing magnetic phenomena in a nonmagnetic material. The sizable coupling between the orbital transition and the circularly polarized phonon results in the large effective phonon magnetic moment. In this work, using magneto-Raman spectroscopy, we investigate substitutional doping of magnetic atoms as a tuning knob of the electronic and phononic properties of MoS 2 . We show that Fe-doping polarizes the spin of the conduction bands and introduces a localized Fe band underneath the conduction band. As a result, an additional orbital transition between the Mo 4d and Fe 3d states emerges, producing an orbital-phonon hybridized mode at 283 cm −1 . Our magnetic field dependent measurements demonstrate that this new mode carries 2.8 $\mu_{\mathrm{B}}$ effective phonon magnetic moment, which is comparable to that of the undoped MoS 2 . Moreover, even though a long-range magnetic order is absent in Fe-doped MoS 2 , the local magnetic moment of Fe modifies the nature of the spin fluctuation, producing monotonically increasing quasielastic scattering spectral weight as temperature decreases. Our results highlight two-dimensional dilute magnetic semiconductors synthesized by substitutional doping as a promising material platform to manipulate the phonon magnetic moment through orbital-phonon coupling.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Intrinsic emittance properties of an Fe-doped β-Ga 2 O 3 (010) photocathode: Ultracold electron emission at 300 K and the polaron self-energy

Measurements of the spectral emission properties of an iron-doped a β-Ga 2 O 3 (010) photocathode at 300 K reveal the presence of an ultracold contribution to the total electron beam emission with a 6 meV mean transverse energy (MTE) in the 3.5–4.4 eV photon energy range (282–354 nm). This extreme sub-thermal photoemission signal is consistent with direct emission of electrons photoexcited from the Fe dopant states into the low effective mass and positive electron affinity primary conduction band, and it is superimposed on a stronger signal with a larger MTE associated with an (optical)phonon-mediated momentum-resonant Franck–Condon (FC) emission process from a thermally populated and negative electron affinity upper conduction band. For photon energies above 4.5 eV, a transition from a long to a short transport regime is forced by an absorption depth reduction to below 100 nm and both MTE signals exhibit spectral trends consistent with phonon-mediated FC emission if the polaron formation self-energy is included in the temperature of the initial thermalized photoexcited electron distribution.

Angeloni, Louis A. [University of Illinois, Chicag↗
DOE OSTI2024

Iron Impurity Impairs the CO 2 Capture Performance of MgO: Insights from Microscopy and Machine Learning Molecular Dynamics

Magnesium oxide (MgO) is a promising sorbent for direct air capture (DAC) of carbon dioxide. Iron (Fe) is a common impurity in naturally occurring MgO and minerals used to produce MgO, yet a molecular-scale understanding of Fe-doping effects on carbonation is lacking. Here, in this study, we observed reduced carbonation performance in Fe-doped MgO experimentally. The energetics of adsorbing a (bi)carbonate ion on pristine and Fe-doped MgO(001) surfaces were further investigated using ab initio and machine learning potential molecular dynamics coupled with metadynamics simulations. Both pristine and Fe-doped surfaces exhibited a basic (OH – ) hydration layer, where the (bi)carbonate ion adsorption is thermodynamically favorable. However, the dissolution of surface Fe had smaller energy barriers and was more favorable than Mg. Leached Fe likely neutralized the near-surface basicity, yielding reduced reactivity on Fe-doped MgO. Our observations offer critical insights for material selection and emphasize the importance of evaluating the geologic origin of earth materials used for DAC.

36 MATERIALS SCIENCE↗
NASA NTRS1984

Material growth and characterization for solid state devices

Manganese was used as the dopant for p-type InGaAs layers grown on semi-insulating (Fe-doped) and n-type (Sn-doped) InP substrates. Optical, electrical (Hall) and SIMS measurements were used to characterize the layers. Mn-diffusion into the substrate (during the growth of In GaAs) was observed only when Fe-doped substrates were used. Quaternary layers of two compositions corresponding to wavelengths (energy gaps) of approximated 1.52 micrometers were successfully grown at a constant temperature of 640 C and InP was grown in the temperature range of 640 C to 655 C. A study of the effect of pulses on the growth velocity of InP indicated no significant change as long as the average applied current was kept constant. A system for depositing films of Al2O3 by the pyrolysis of aluminum isopropoxide was designed and built. Deposited layers on Si were characterized with an ellipsometer and exhibited indices of refraction between 1.582 and 1.622 for films on the order of 3000 A thick. Undoped and p-type (Mn-doped) InGaAs epitaxial layers were also grown on Fe-doped InP substrates through windows in sputtered SiO2 (3200 A thick) layers.

Stefanakos, E. K.↗
DOE OSTI2025

In-situ formation of stable interface towards Li-in anode for halide solid-state electrolyte

Halide-based solid-state electrolytes (SSEs) are promising candidates for next-generation all-solid-state lithium batteries (ASSLBs) due to their high ionic conductivity and chemical stability. However, their poor interfacial compatibility with lithium metal anode and Li-In alloy significantly hinder practical application due to the requirement for a protective interlayer. In this study, a novel approach to overcome this limitation is presented by introducing iron (Fe) doping into Li 3 InCl 6 (LIC), which enables direct and stable contact with lithium-indium (Li-In) metal without a protective interlayer. Thermodynamic and computational analyses identified Fe 3+ as a suitable dopant based on its similar reduction potential to In 3+ and structural compatibility within the halide lattice. The synthesized 10 at. % Fe-doped LIC exhibits high phase purity, retained ionic conductivity, and notably improved interfacial stability. Full-cell tests using Fe-LIC achieve over 300 cycles with 80 % capacity retention. At the same time, symmetric Li-In/ Fe-LIC/ Li-In cells sustain over 500 h of operation, representing the first reported long-term cycling of LIC-based ASSLB without a protective interlayer. In conclusion, this work establishes Fe doping as an effective strategy to stabilize halide SSEs of In system against Li-In alloy, thereby simplifying cell architecture and advancing the development of safer, high-performance halide-based solid-state electrolytes.

Halide-based solid-state electrolytes↗
DOE OSTI2026

Discovery of a new phase transition and high-valent redox mechanism in Fe-substituted Na 2 Mn 3 O 7

Sodium-ion batteries are a promising lower-cost alternative to lithium-ion batteries, but further improvements in electrochemical performance are required. One strategy to increase capacity is to enable reversible high-valent cationic and anionic redox in layered cathode materials; however, this is typically accompanied by structural degradation. Here, in this study, we elucidate the mechanism by which Fe-doped Na 2 Mn 3 O 7 , featuring ordered transition metal-vacancies, achieves reversible high-valent redox. Using Mössbauer spectroscopy, soft X-ray absorption spectroscopy (XAS), and in-situ hard XAS, we demonstrate reversible high-valent cationic redox involving both Fe and Mn while in-situ Raman confirms the absence of local structural degradation associated with oxygen redox. Combining in-situ X-ray diffraction with theoretical calculations, we further identify a previously unreported global phase transition from the $\bar{P1}$ to the $P2_1/c$ space group during electrochemical cycling and develop a physical model describing this structural evolution. These results provide insights for structurally stable layered sodium transition metal oxide cathodes with reversible high-valent redox.

36 MATERIALS SCIENCE↗
DOE OSTI2026

The Effects of Iron and Manganese Doping on the Carbonation of Brucite [Mg(OH) 2 ]

Brucite [Mg(OH) 2 ] is a promising sorbent for carbon dioxide removal (CDR) due to its availability and low calcination temperatures. However, natural and synthetic brucites tend to contain metal impurities, such as iron or manganese, and how these impurities affect the interfacial chemical reactivity is uncertain. Here, in this study, the impact of low concentrations of iron and manganese impurities on the carbonation efficiency of Mg(OH) 2 was examined. Mg(OH) 2 with small amounts (1–5 mol %) of Fe and Mn was synthesized. The increasing substitution of Fe into Mg(OH) 2 was accompanied by the oxidation of Fe. The phase transformation sequence during the carbonation was found to be brucite [Mg(OH) 2 ] → amorphous magnesium carbonate (MgCO 3 ·nH 2 O) → nesquehonite (MgCO 3 ·3H 2 O), regardless of impurity concentration. Both the Fe- and Mn-doped Mg(OH) 2 samples were more reactive than endmember Mg(OH) 2 , possibly due to their higher surface areas and lower stabilities. During carbonation, 3 mol % Fe- and Mn-doped Mg(OH) 2 showed the highest reactivity. The variance in reactivity for Mn-doped Mg(OH) 2 was less than that of Fe-doped Mg(OH) 2 . These results suggest that natural or industrial waste Mg(OH) 2 with less than 5 mol % Fe and Mn impurities may be targeted as more effective CDR sorbents than endmember Mg(OH) 2 .

Carbon dioxide removal↗
DOE OSTI2024

Simultaneous Development of Antiferromagnetism and Local Symmetry Breaking in a Kagome Magnet (Co 0.45 Fe 0.55 )Sn

CoSn and FeSn, two kagome-lattice metals, have recently attracted significant attention as hosts of electronic flat bands and emergent physical properties. However, current understandings of their physical properties are limited to knowledge of the average crystal structure. Here, we report the Fe-doping induced coemergence of the antiferromagentic (AFM) order and local symmetry breaking in (Co 0.45 Fe 0.55 )Sn. Rietveld analysis on the neutron and synchrotron X-ray diffraction data indicates A-type antiferromagnetic order with the moment pointing perpendicular to the kagome layers, associated with the anomaly in the MSn(1) 2 Sn(2) 4 (M = Co/Fe) octahedral distortion and the lattice constant c. Reverse Monte Carlo (RMC) modeling of the synchrotron X-ray total scattering results captured the subtle local orthorhombic distortion involving off-axis displacements of Sn(2). Our results indicate that the stable hexagonal lattice above T N becomes unstable once the A-type AFM order is formed below T N . Here we argue that the local symmetry breaking has a magnetic origin, since the spatially varied M–Sn(2) bond lengths arise from out-of-plane magnetic exchange coupling J c via the exchange pathway M–Sn(2)–M. Our study provides comprehensive information on the crystal structure in both long-range scale and local scale, unveiling unique coupling between AFM order, octahedral distortion, and hidden local symmetry breaking.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Interplay between element-specific distortions and electrocatalytic oxygen evolution for cobalt–iron hydroxides

A microscopic understanding of how Fe-doping of Co(OH) 2 improves electrocatalytic oxygen evolution remains elusive. We study two Co 1–x Fex(OH) 2 series that differ in fabrication protocol and find composition alone poorly correlates to catalyst performance. Structural descriptors extracted using X-ray diffraction, X-ray absorption spectroscopy, and Raman spectroscopy reveal element-specific distortions in Co 1–x Fe x (OH) 2 . These structural descriptors are composition-dependent within individual sample series but inconsistent across fabrication protocols, revealing fabrication-dependence in catalyst microstructure. Correlations between structural parameters from different techniques show that Fe–O resists bond length changes, forcing distortion of Co environments. We find the difference in O–M–O bond angles between Co and Fe sites to correlate with electrocatalytic behavior across both sample series, which we attribute to asymmetric distortion of potential energy surfaces for the Co(III) to Co(IV) oxidation. A Tafel slope consistent with a rate-limiting step without electron transfer emerges as the O–Co–O angle decreases, implying a distortion-induced transition in the rate-limiting step. The fabrication dependence of electronic and bonding structure in the catalysts should be considered in theoretical and high-throughput analyses of electrocatalyst materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Simultaneously improved reversibility and hydrogen production of solid oxide cells through infiltrating air electrode

Among the various fuel cells, solid oxide cells (SOCs) are the unique type that can principally operate reversibly as either fuel cells to produce electricity or as an electrolyser to split water and produce green hydrogen (H 2 ). Nevertheless, the SOCs' reversibility presents enormous challenges that are manifested by the fast degradation through the cycling between fuel cell and electrolysis mode. While the La 0.8 Sr 0.2 MnO 3 /yttria-stabilized zirconia (LSM/YSZ) air electrode possesses significant advantages in terms of high electrical conductivity and high thermal stability under fuel cell mode, the SOCs with the LSM/YSZ air electrode experience rapid performance degradation with catastrophic electrode delamination shortly after switching from fuel cell to electrolysis mode. To prevent such catastrophic delamination and enable the electrolysis H 2 production, a chemical solution with the designed chemistry of SrFe 2 O 4-d was infiltrated into the LSM/YSZ air electrode. The infiltration immediately mitigates the catastrophic delamination, and the infiltrated cells exhibit significantly improved reversibility upon the electrochemical operation. Nanostructure examination reveals nanoscale cracks and second-phase nanograins formed in the air electrode from the baseline cell. By contrast, no delamination was observed at either the micron or the nanoscale for the infiltrated cell, which is attributed to the increased ion conductivity of the Fe-doped LSM mixed conductor induced by the significant interdiffusion between the LSM backbone and infiltrates. Here, this study presents a viable method for preventing electrode delamination while enhancing the durability of H 2 production and power generation for reversible fuel cell/electrolysis cell operation. It further opens new research directions of modifying the electrochemical activity of the electrode of inherently functional cells through the infiltration of the solutions with different chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Magnetic semiconductors from functionalized Cr 2 ⁢C MXenes

Here, we report an ab initio investigation of functionalized and 3⁢𝑑-electron-doped Cr 2 ⁢C MXenes. Upon functionalization, the Cr 2⁢ C becomes chemically, dynamically, and mechanically stable, and it exhibits magnetic semiconducting behavior. Cr 2 ⁢CF 2 stands out as a wide band gap semiconductor, possessing superexchange interaction mediated by F atoms within the layer; however, the applied strain transforms it from an indirect to a direct band gap semiconductor. Strong spin-phonon coupling found in Cr 2 ⁢CH 2 is supported by the distorted Cr spin density due to the hydrogen environment. Two magnon branches, associated with two sublattice spins, are found in the ferromagnetic Cr 2 ⁢CO 2 and antiferromagnetic Cr 2 ⁢CF 2 . Depending on the types of 3⁢𝑑-electron dopants and functionalization, Cr 2 ⁢C MXenes (except for Cr 2 ⁢CO 2 ) change from an indirect band gap magnetic semiconductor to different states of electronic and magnetic matter, including an exotic direct band gap magnetic bipolar semiconductor. In addition, we reveal a band inversion between the two highest valence bands in the Fe-doped Cr 2 ⁢CCl 2 .

2D materials↗
NASA NTRS1970

A new type of powder maser

Maser amplifier with nonoriented Fe-doped rutile powder as active material, observing broad absorption bands under magnetic field

Hughes, W. E.↗
NASA NTRS1984

Material growth and characterization for solid state devices

During the reporting period, InGaAs was grown on Fe-doped (semi-insulating) (100) InP substrates by current controlled liquid phase epitaxy (CCLPE) at 640 C and current densities of 2.5A sq/cm to 5 A/sq cm for periods from 5 to 30 minutes. Special efforts were made to reduce the background carrier concentration in the grown layers as much as possible. The best layers exhibited carrier concentrations in the mid-10 to the 15th power/cu cm range and up to 10,900 sq cm/V-sec room temperature mobility. InGaAsP quaternary layers of energy gap corresponding to wavelengths of approximately 1.5 microns and 1.3 microns were grown on (100) InP substrates by CCLPE. In the device fabrication area, work was directed toward processing MISFET's using InGaAs. SiO2, Si3N4 and Al2O3 were deposited by ion beam sputtering, electron beam evaporation and chemical vapor reaction on Si, GaAs, and InGaAs substrates. SiO2 and Si3N4 sputtered layers were found to possess a high density of pinhole defects that precluded capacitance-voltage analysis. Chemical vapor deposited Al2O3 layers on Si, GaAs and InGaAs substrates also exhibited a large number of pinhole defects. This prevented achieving good MIS devices over most of the substrate surface area.

Stefanakos, E. K.↗