Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fe-doping”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Dilute magnetic impurity-induced effective phonon magnetic moment in Fe-doped monolayer MoS 2

Realization of large effective phonon magnetic moment in monolayer MoS 2 has established an important route for exploring intriguing magnetic phenomena in a nonmagnetic material. The sizable coupling between the orbital transition and the circularly polarized phonon results in the large effective phonon magnetic moment. In this work, using magneto-Raman spectroscopy, we investigate substitutional doping of magnetic atoms as a tuning knob of the electronic and phononic properties of MoS 2 . We show that Fe-doping polarizes the spin of the conduction bands and introduces a localized Fe band underneath the conduction band. As a result, an additional orbital transition between the Mo 4d and Fe 3d states emerges, producing an orbital-phonon hybridized mode at 283 cm −1 . Our magnetic field dependent measurements demonstrate that this new mode carries 2.8 $\mu_{\mathrm{B}}$ effective phonon magnetic moment, which is comparable to that of the undoped MoS 2 . Moreover, even though a long-range magnetic order is absent in Fe-doped MoS 2 , the local magnetic moment of Fe modifies the nature of the spin fluctuation, producing monotonically increasing quasielastic scattering spectral weight as temperature decreases. Our results highlight two-dimensional dilute magnetic semiconductors synthesized by substitutional doping as a promising material platform to manipulate the phonon magnetic moment through orbital-phonon coupling.

36 MATERIALS SCIENCE↗
DOE OSTI2024

High-field/high-frequency electron spin resonances of Fe-doped β − Ga 2 O 3 by terahertz generalized ellipsometry: Monoclinic symmetry effects

We demonstrate detection and measurement of electron paramagnetic spin resonances (EPR) of iron defects in β − Ga 2 O 3 utilizing generalized ellipsometry at frequencies between 110 and 170 GHz. The experiments are performed on an Fe-doped single crystal in a free-beam configuration in reflection at 45 ∘ and magnetic fields between 3 and 7 T. In contrast with low-field, low-frequency EPR measurements, we observe all five transitions of the s = 5 / 2 high-spin state Fe 3 + simultaneously. We confirm that ferric Fe 3 + is predominantly found at octahedrally coordinated Ga sites. We obtain the full set of fourth-order monoclinic zero-field splitting parameters for both octahedrally and tetrahedrally coordinated sites by employing measurements at multiple sample azimuth rotations. The capability of high-field EPR allows us to demonstrate that simplified second-order orthorhombic spin Hamiltonians are insufficient, and fourth-order terms as well as consideration of the monoclinic symmetry are needed. These findings are supported by computational approaches based on density-functional theory for second-order and on ligand-field theory for fourth-order parameters of the spin Hamiltonian. Terahertz ellipsometry is a way to measure spin resonances in a cavity-free setup. Its possibility of varying the probe frequency arbitrarily without otherwise changing the experimental setup offers unique means of truly disentangling different components of highly anisotropic spin Hamiltonians. Published by the American Physical Society 2024

Materials Science↗
DOE OSTI2026

Intrinsic emittance properties of an Fe-doped β-Ga 2 O 3 (010) photocathode: Ultracold electron emission at 300 K and the polaron self-energy

Measurements of the spectral emission properties of an iron-doped a β-Ga 2 O 3 (010) photocathode at 300 K reveal the presence of an ultracold contribution to the total electron beam emission with a 6 meV mean transverse energy (MTE) in the 3.5–4.4 eV photon energy range (282–354 nm). This extreme sub-thermal photoemission signal is consistent with direct emission of electrons photoexcited from the Fe dopant states into the low effective mass and positive electron affinity primary conduction band, and it is superimposed on a stronger signal with a larger MTE associated with an (optical)phonon-mediated momentum-resonant Franck–Condon (FC) emission process from a thermally populated and negative electron affinity upper conduction band. For photon energies above 4.5 eV, a transition from a long to a short transport regime is forced by an absorption depth reduction to below 100 nm and both MTE signals exhibit spectral trends consistent with phonon-mediated FC emission if the polaron formation self-energy is included in the temperature of the initial thermalized photoexcited electron distribution.

Angeloni, Louis A. [University of Illinois, Chicag↗
DOE OSTI2024

Possible coexistence of magnetism and paramagnetic singularity in lightly Fe-doped WTe 2

Topological semimetals possess nodal or nodal-line phases where conduction and valence bands touch at points or lines in momentum space, respectively. Such band touching is symmetry protected and gives rise to exotic and interesting electronic properties. Coupling topological order with magnetism provides a platform for exploring time-reversal (TR) symmetry breaking topological physics, such as axion electrodynamics, inverse spin-galvanic effect, and the quantized anomalous Hall effect. The Weyl semimetal (WSM) requires breaking either TR symmetry or lattice inversion symmetry (I). By doping inversion-symmetry-broken WSM with magnetic dopants, one can expect to create a WSM with both symmetries breaking simultaneously. Here, structural, electrical, and magnetic properties of Fe x ⁢W 1–x Te 2 (x = 0 and 0.011) are reported. It is revealed that, with a small Fe doping concentration (x = 0.011), a ferromagnetism is induced at low temperature (<10 K). Scanning tunneling microscopy and spectroscopy measurements in Fe 0.011 ⁢W 0.989 ⁢Te 2 further reveal only substitution and no intercalated dopants being observed. The probabilities of the Fe substitutions at the two nonequivalent W sites are quantified with equal probability. The dl/dV point spectra indicates that the Fe substitution in WTe 2 manifests itself as electron doping regardless of doping sites. The results clearly reveal the possible coexistence of magnetism and Weyl points in the lightly Fe doped WTe2 at low temperature. Furthermore, this provides an ideal system for further study on the interplay between the topological Weyl points and the TR symmetry breaking.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Iron Impurity Impairs the CO 2 Capture Performance of MgO: Insights from Microscopy and Machine Learning Molecular Dynamics

Magnesium oxide (MgO) is a promising sorbent for direct air capture (DAC) of carbon dioxide. Iron (Fe) is a common impurity in naturally occurring MgO and minerals used to produce MgO, yet a molecular-scale understanding of Fe-doping effects on carbonation is lacking. Here, in this study, we observed reduced carbonation performance in Fe-doped MgO experimentally. The energetics of adsorbing a (bi)carbonate ion on pristine and Fe-doped MgO(001) surfaces were further investigated using ab initio and machine learning potential molecular dynamics coupled with metadynamics simulations. Both pristine and Fe-doped surfaces exhibited a basic (OH – ) hydration layer, where the (bi)carbonate ion adsorption is thermodynamically favorable. However, the dissolution of surface Fe had smaller energy barriers and was more favorable than Mg. Leached Fe likely neutralized the near-surface basicity, yielding reduced reactivity on Fe-doped MgO. Our observations offer critical insights for material selection and emphasize the importance of evaluating the geologic origin of earth materials used for DAC.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Interphase Stabilization of LiNi 0.5 Mn 1.5 O 4 Cathode for 5 V–Class All–Solid–State Batteries

Employing high voltage cobalt-free spinel LiNi 0.5 Mn 1.5 O 4 (LNMO) as a cathode is promising for high energy density and cost-effectiveness, but it has challenges in all-solid-state batteries (ASSBs). Here, it is revealed that the limitation of lithium argyrodite sulfide solid electrolyte (Li 6 PS 5 Cl) with the LNMO cathode is due to the intrinsic chemical incompatibility and poor oxidative stability. Through a careful analysis of the interphase of LNMO, it is elucidated that even the halide solid electrolyte (Li 3 InCl 6 ) with high oxidative stability can be decomposed to form resistive interphase layers with LNMO in ASSBs. Interestingly, with Fe-doping and a Li 3 PO 4 protective layer coating, LNMO with Li 3 InCl 6 displays stable cycle performance with a stabilized interphase at a high voltage (≈4.7 V) in ASSBs. The enhanced interfacial stability with the extended electrochemical stability window through doping and coating enables high electrochemical stability with LNMO in ASSBs. Furthermore, this work provides guidance for employing high-voltage cathodes in ASSBs and highlights the importance of stable interphases to enable stable cycling in ASSBs.

25 ENERGY STORAGE↗
DOE OSTI2023

Fe-single-atom catalyst nanocages linked by bacterial cellulose-derived carbon nanofiber aerogel for Li-S batteries

Li-S battery (LSB) is promising for achieving high capacity. Still, its development is hindered by the complex redox process with sluggish kinetics and particularly the resulting lithium polysulfides (LiPS) shuttle effects. Single-atom catalysts (SACs), with their maximized atom utilization, could effectively chemisorb soluble LiPSs and expedite the sulfide conversion reaction kinetics. Here we report incorporating Fe single metal atom catalyst (Fe-SAC) in the sulfur cathode design and its electrocatalytic effects. Fe-doped ZIF-8 nanocages were introduced into a cheap biomass bacteria cellulose. A pyrolysis process converted them into an aerogel structure with Fe-SAC-functionalized N-doped carbon nanocages linked by a carbon nanofiber network (FeSA-NC@CBC), which was applied as a scaffold to fabricate freestanding and binder-free sulfur cathodes. He we conducted electrochemical measurements to reveal Fe-SAC functions including lowering energy barriers for S 8 reduction to liquid-phase LiPSs and further to solid-phase Li 2 S 2 /Li 2 S and accelerating Li 2 S 2 /Li 2 S nucleation and deposition, as corroborated by our theoretical calculation results. Benefiting from the synergistic effects of highly active Fe-SAC and three-dimensional conductive network, the sulfide reaction kinetics is improved, which can diminish LiPS shuttle effects and therefore improve LBS rate performance and cycling stability. Accordingly, the fabricated FeSA-NC@CBC composite cathode delivers an excellent rate capability at 2C with a reversible capacity of 840 mAh/g and a long-term cyclic stability of 800 mAh/g at 1C after 500 cycles.

25 ENERGY STORAGE↗
DOE OSTI2025

In-situ formation of stable interface towards Li-in anode for halide solid-state electrolyte

Halide-based solid-state electrolytes (SSEs) are promising candidates for next-generation all-solid-state lithium batteries (ASSLBs) due to their high ionic conductivity and chemical stability. However, their poor interfacial compatibility with lithium metal anode and Li-In alloy significantly hinder practical application due to the requirement for a protective interlayer. In this study, a novel approach to overcome this limitation is presented by introducing iron (Fe) doping into Li 3 InCl 6 (LIC), which enables direct and stable contact with lithium-indium (Li-In) metal without a protective interlayer. Thermodynamic and computational analyses identified Fe 3+ as a suitable dopant based on its similar reduction potential to In 3+ and structural compatibility within the halide lattice. The synthesized 10 at. % Fe-doped LIC exhibits high phase purity, retained ionic conductivity, and notably improved interfacial stability. Full-cell tests using Fe-LIC achieve over 300 cycles with 80 % capacity retention. At the same time, symmetric Li-In/ Fe-LIC/ Li-In cells sustain over 500 h of operation, representing the first reported long-term cycling of LIC-based ASSLB without a protective interlayer. In conclusion, this work establishes Fe doping as an effective strategy to stabilize halide SSEs of In system against Li-In alloy, thereby simplifying cell architecture and advancing the development of safer, high-performance halide-based solid-state electrolytes.

Halide-based solid-state electrolytes↗
DOE OSTI2026

Discovery of a new phase transition and high-valent redox mechanism in Fe-substituted Na 2 Mn 3 O 7

Sodium-ion batteries are a promising lower-cost alternative to lithium-ion batteries, but further improvements in electrochemical performance are required. One strategy to increase capacity is to enable reversible high-valent cationic and anionic redox in layered cathode materials; however, this is typically accompanied by structural degradation. Here, in this study, we elucidate the mechanism by which Fe-doped Na 2 Mn 3 O 7 , featuring ordered transition metal-vacancies, achieves reversible high-valent redox. Using Mössbauer spectroscopy, soft X-ray absorption spectroscopy (XAS), and in-situ hard XAS, we demonstrate reversible high-valent cationic redox involving both Fe and Mn while in-situ Raman confirms the absence of local structural degradation associated with oxygen redox. Combining in-situ X-ray diffraction with theoretical calculations, we further identify a previously unreported global phase transition from the $\bar{P1}$ to the $P2_1/c$ space group during electrochemical cycling and develop a physical model describing this structural evolution. These results provide insights for structurally stable layered sodium transition metal oxide cathodes with reversible high-valent redox.

36 MATERIALS SCIENCE↗
DOE OSTI2026

The Effects of Iron and Manganese Doping on the Carbonation of Brucite [Mg(OH) 2 ]

Brucite [Mg(OH) 2 ] is a promising sorbent for carbon dioxide removal (CDR) due to its availability and low calcination temperatures. However, natural and synthetic brucites tend to contain metal impurities, such as iron or manganese, and how these impurities affect the interfacial chemical reactivity is uncertain. Here, in this study, the impact of low concentrations of iron and manganese impurities on the carbonation efficiency of Mg(OH) 2 was examined. Mg(OH) 2 with small amounts (1–5 mol %) of Fe and Mn was synthesized. The increasing substitution of Fe into Mg(OH) 2 was accompanied by the oxidation of Fe. The phase transformation sequence during the carbonation was found to be brucite [Mg(OH) 2 ] → amorphous magnesium carbonate (MgCO 3 ·nH 2 O) → nesquehonite (MgCO 3 ·3H 2 O), regardless of impurity concentration. Both the Fe- and Mn-doped Mg(OH) 2 samples were more reactive than endmember Mg(OH) 2 , possibly due to their higher surface areas and lower stabilities. During carbonation, 3 mol % Fe- and Mn-doped Mg(OH) 2 showed the highest reactivity. The variance in reactivity for Mn-doped Mg(OH) 2 was less than that of Fe-doped Mg(OH) 2 . These results suggest that natural or industrial waste Mg(OH) 2 with less than 5 mol % Fe and Mn impurities may be targeted as more effective CDR sorbents than endmember Mg(OH) 2 .

Carbon dioxide removal↗
DOE OSTI2023

Modular Iron–Bipyridine-Based Conjugated Aerogels as Catalysts for Oxygen Reduction Reaction

Aerogels have a large surface area and a porous structure, which make them an attractive catalyst support materials for fuel cells. Modifying the aerogels’ building blocks and introducing catalytic sites into their backbones allow them to function as both catalysts and supports, thereby increasing the density and distribution of catalyst active sites. In this work, we studied conjugated aerogels containing iron–bipyridine catalytic sites for the oxygen reduction reaction. To demonstrate the variation in physical and electrochemical properties of these aerogels, a series of aerogels were synthesized by a Glaser coupling reaction. Iron salt was added to the three-dimensional gel to produce iron–bipyridine complexes and obtain atomically dispersed catalytic sites. The electrocatalytic activity and electrical conductivity of the aerogels were increased after their heat treatment to yield Fe-doped carbon aerogels. The control of metal loadings was accomplished by changing the bipyridine content during the aerogel synthesis, resulting in 0.9–4.1 wt % Fe. In conclusion, the results show a correlation between Fe loading, aerogel structure, and catalytic activity, achieving high performance for the oxygen reduction reaction in both acidic and alkaline media.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Interplanar Ferromagnetism Enhanced Ultrawide Zero Thermal Expansion in Kagome Cubic Intermetallic (Zr,Nb)Fe 2

A cubic metal exhibiting zero thermal expansion (ZTE) over a wide temperature window demonstrates significant applications in a broad range of advanced technologies but is extremely rare in nature. Here, enabled by high-temperature synthesis, we realize tunable thermal expansion via magnetic doping in the class of kagome cubic (Fd-3m) intermetallic (Zr,Nb)Fe 2 . A remarkably isotropic ZTE is achieved with a negligible coefficient of thermal expansion (+0.47 x 10 -6 K -1 ) from 4 to 425 K, almost wider than most ZTE in metals available. A combined in situ magnetization, neutron powder diffraction, and hyperfine Mössbauer spectrum analysis reveals that interplanar ferromagnetic ordering contributes to a large magnetic compensation for normal lattice contraction upon cooling. Trace Fe-doping introduces extra magnetic exchange interactions that distinctly enhance the ferromagnetism and magnetic ordering temperature, thus engendering such an ultrawide ZTE. Finally, this work presents a promising ZTE in kagome metallic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Simultaneous Development of Antiferromagnetism and Local Symmetry Breaking in a Kagome Magnet (Co 0.45 Fe 0.55 )Sn

CoSn and FeSn, two kagome-lattice metals, have recently attracted significant attention as hosts of electronic flat bands and emergent physical properties. However, current understandings of their physical properties are limited to knowledge of the average crystal structure. Here, we report the Fe-doping induced coemergence of the antiferromagentic (AFM) order and local symmetry breaking in (Co 0.45 Fe 0.55 )Sn. Rietveld analysis on the neutron and synchrotron X-ray diffraction data indicates A-type antiferromagnetic order with the moment pointing perpendicular to the kagome layers, associated with the anomaly in the MSn(1) 2 Sn(2) 4 (M = Co/Fe) octahedral distortion and the lattice constant c. Reverse Monte Carlo (RMC) modeling of the synchrotron X-ray total scattering results captured the subtle local orthorhombic distortion involving off-axis displacements of Sn(2). Our results indicate that the stable hexagonal lattice above T N becomes unstable once the A-type AFM order is formed below T N . Here we argue that the local symmetry breaking has a magnetic origin, since the spatially varied M–Sn(2) bond lengths arise from out-of-plane magnetic exchange coupling J c via the exchange pathway M–Sn(2)–M. Our study provides comprehensive information on the crystal structure in both long-range scale and local scale, unveiling unique coupling between AFM order, octahedral distortion, and hidden local symmetry breaking.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Interplay between element-specific distortions and electrocatalytic oxygen evolution for cobalt–iron hydroxides

A microscopic understanding of how Fe-doping of Co(OH) 2 improves electrocatalytic oxygen evolution remains elusive. We study two Co 1–x Fex(OH) 2 series that differ in fabrication protocol and find composition alone poorly correlates to catalyst performance. Structural descriptors extracted using X-ray diffraction, X-ray absorption spectroscopy, and Raman spectroscopy reveal element-specific distortions in Co 1–x Fe x (OH) 2 . These structural descriptors are composition-dependent within individual sample series but inconsistent across fabrication protocols, revealing fabrication-dependence in catalyst microstructure. Correlations between structural parameters from different techniques show that Fe–O resists bond length changes, forcing distortion of Co environments. We find the difference in O–M–O bond angles between Co and Fe sites to correlate with electrocatalytic behavior across both sample series, which we attribute to asymmetric distortion of potential energy surfaces for the Co(III) to Co(IV) oxidation. A Tafel slope consistent with a rate-limiting step without electron transfer emerges as the O–Co–O angle decreases, implying a distortion-induced transition in the rate-limiting step. The fabrication dependence of electronic and bonding structure in the catalysts should be considered in theoretical and high-throughput analyses of electrocatalyst materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Simultaneously improved reversibility and hydrogen production of solid oxide cells through infiltrating air electrode

Among the various fuel cells, solid oxide cells (SOCs) are the unique type that can principally operate reversibly as either fuel cells to produce electricity or as an electrolyser to split water and produce green hydrogen (H 2 ). Nevertheless, the SOCs' reversibility presents enormous challenges that are manifested by the fast degradation through the cycling between fuel cell and electrolysis mode. While the La 0.8 Sr 0.2 MnO 3 /yttria-stabilized zirconia (LSM/YSZ) air electrode possesses significant advantages in terms of high electrical conductivity and high thermal stability under fuel cell mode, the SOCs with the LSM/YSZ air electrode experience rapid performance degradation with catastrophic electrode delamination shortly after switching from fuel cell to electrolysis mode. To prevent such catastrophic delamination and enable the electrolysis H 2 production, a chemical solution with the designed chemistry of SrFe 2 O 4-d was infiltrated into the LSM/YSZ air electrode. The infiltration immediately mitigates the catastrophic delamination, and the infiltrated cells exhibit significantly improved reversibility upon the electrochemical operation. Nanostructure examination reveals nanoscale cracks and second-phase nanograins formed in the air electrode from the baseline cell. By contrast, no delamination was observed at either the micron or the nanoscale for the infiltrated cell, which is attributed to the increased ion conductivity of the Fe-doped LSM mixed conductor induced by the significant interdiffusion between the LSM backbone and infiltrates. Here, this study presents a viable method for preventing electrode delamination while enhancing the durability of H 2 production and power generation for reversible fuel cell/electrolysis cell operation. It further opens new research directions of modifying the electrochemical activity of the electrode of inherently functional cells through the infiltration of the solutions with different chemistry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗