Search NASA⌕ Search

SEARCH · Search NASA

Results for “FeCrAl”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Oxidation Resistance in 1200°C Steam of a FeCrAl Alloy Fabricated by Three Metallurgical Processes

Abstract FeCrAl alloys are a leading candidate material for accident tolerant fuel cladding due to their good performance in both normal light-water reactor operating conditions as well as their resilience to high-temperature accident scenarios. For commercial-scale production, new fabrication techniques need to be investigated. In this study, the effects of fabrication methods on the high-temperature steam oxidation performance of C26M (Fe12Cr6Al2Mo in wt.%) were investigated. Three variants of C26M were manufactured: wrought (cast and forged) (WC26M), powder metallurgy hot isostatic pressing (PMC26M), and laser powder bed fusion additive manufacturing (AMC26M). All three variants were exposed to steam at 1200°C for 2 h. Results showed no significant variation in mass change between the variants after steam exposure. All three variants effectively formed stable protective alumina films with ~0.6–1.3 µ m thickness. This study suggests FeCrAl alloys have excellent resilience to high-temperature steam in nuclear reactor accident scenarios regardless of the fabrication method.

Materials Science↗
DOE OSTI2017

Parametric and experimentally informed BWR Severe Accident Analysis Utilizing FeCrAl - M3FT-17OR020205041

Iron-chromium-aluminum (FeCrAl) alloys are being considered as advanced fuel cladding concepts with enhanced accident tolerance. At high temperatures, FeCrAl alloys have slower oxidation kinetics and higher strength compared with zirconium-based alloys. FeCrAl could be used for fuel cladding and spacer or mixing vane grids in light water reactors and/or as channel box material in boiling water reactors (BWRs). There is a need to assess the potential gains afforded by the FeCrAl accident-tolerant-fuel (ATF) concept over the existing zirconium-based materials employed today. To accurately assess the response of FeCrAl alloys under severe accident conditions, a number of FeCrAl properties and characteristics are required. These include thermophysical properties as well as burst characteristics, oxidation kinetics, possible eutectic interactions, and failure temperatures. These properties can vary among different FeCrAl alloys. Oak Ridge National Laboratory has pursued refined values for the oxidation kinetics of the B136Y FeCrAl alloy (Fe-13Cr-6Al wt %). This investigation included oxidation tests with varying heating rates and end-point temperatures in a steam environment. The rate constant for the low-temperature oxidation kinetics was found to be higher than that for the commercial APMT FeCrAl alloy (Fe-21Cr-5Al-3Mo wt %). Compared with APMT, a 5 times higher rate constant best predicted the entire dataset (root mean square deviation). Based on tests following heating rates comparable with those the cladding would experience during a station blackout, the transition to higher oxidation kinetics occurs at approximately 1,500°C. A parametric study varying the low-temperature FeCrAl oxidation kinetics was conducted for a BWR plant using FeCrAl fuel cladding and channel boxes using the MELCOR code. A range of station blackout severe accident scenarios were simulated for a BWR/4 reactor with Mark I containment. Increasing the FeCrAl low-temperature oxidation rate constant (3 times and 10 times that of the rate constant for APMT) had a negligible impact on the early stages of the accident and minor impacts on the accident progression after the first relocation of the fuel. At temperatures below 1,500°C, increasing the rate constant for APMT by a factor of 10 still resulted in only minor FeCrAl oxidation. In general, the gains afforded by the FeCrAl enhanced ATF concept with respect to accident sequence timing and combustible gas generation are consistent with previous efforts. Compared with the traditional Zircaloy-based cladding and channel box system, the FeCrAl concept could provide a few extra hours of time for operators to take mitigating actions and/or for evacuations to take place. A coolable core geometry is retained longer, enhancing the ability to stabilize an accident. For example, a station blackout was simulated in which cooling water injection was lost 36 hours after shutdown. The timing to first fuel relocation was delayed by approximately 5 h for the FeCrAl ATF concept compared with that of the traditional Zircaloy-based cladding and channel box system.

36 MATERIALS SCIENCE↗
DOE OSTI2023

High-temperature steam oxidation study of irradiated FeCrAl defueled specimens

Post irradiation examinations (PIE) were performed on irradiated iron-chromium-aluminum (FeCrAl) specimens. These FeCrAl specimens were fabricated at the US Department of Energy's Oak Ridge National Laboratory (ORNL). The experimental setup involved subjecting FeCrAl cladding, along with UO 2 pellets, to irradiation in the Idaho National Laboratory Advanced Test Reactor (ATR). In parallel, the FeCrAl alloy tubing without UO 2 pellets was irradiated at ORNL's High Flux Isotope Reactor (HFIR). After irradiation, the ATR-irradiated rodlet was transported to an ORNL hot cell, where it was sectioned into multiple samples for the PIE and severe-accident testing. The sectioning process revealed that the fuel was not bonded to the cladding and could be easily detached from sectioned cladding slices. Microstructural analysis of the fuel cross sections demonstrated no significant interaction between the fuel and the cladding. Additionally, high-temperature steam oxidation tests on defueled cladding segments showed minimal oxygen uptake even at 1200 °C. Here, the ATR-irradiated specimens began to exhibit signs of enhanced oxidation upon reaching a temperature of 1300 °C. Furthermore, enhanced oxidation was observed on the inner surface of the ATR-irradiated FeCrAl specimen, which had been subjected to 1300 °C for a duration of 1 min. By contrast, high-temperature steam oxidation experiments indicated that the HFIR-irradiated FeCrAl cladding provided good thermal stability when exposed to 1300 °C for up to 4 h. Comparative analysis encompassing the oxidation behavior of the ATR-irradiated fueled FeCrAl, HFIR-irradiated unfueled FeCrAl, and unirradiated FeCrAl suggests that the fuel–cladding interaction, although not visible via standard microscale electron microscopy measurements, may accelerate the deterioration of FeCrAl cladding in beyond-design-basis accident scenarios.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

A FeCrAl-Al2O3 Composite Produced via Laser Powder Bed Fusion of a Mixed Powder for Porous Catalyst Scaffolds

This study proposes a novel approach for synthesizing and etching bicontinuous FeCrAl-Al2O3 composites as a means for replacing FeCrAl foams as catalyst scaffolds in bio-driven alcohol reactors for jet-fuel production. Conventional FeCrAl foams suffer from poor availability and consequent high costs. New additive manufacturing techniques provide an opportunity to produce tailored foams in reasonable times and at acceptable costs. This research aimed to generate a porous FeCrAl structure by etching a bicontinuous FeCrAl-Al2O3 composite produced by laser powder bed fusion of amalgamated FeCrAl and Al2O3 powders. The composite powder for laser powder bed fusion is created by ball-milling FeCrAl and Al2O3 powders. This research focuses on achieving a bi-continuous FeCrAl-Al2O3 structure, essential for the selective removal of the ceramic phase. The influence of laser processing parameters on the microstructure was examined across a range of laser powers (60-120 W) and scan speeds (100-400 mm/s), showing that higher powers and speeds produce finer metal struts. A bi-continuous microstructure was consistently obtained, marking a key achievement. The Al2O3 removal process involved a two-step etching method using hydrochloric and phosphoric acids, tested across various etching times. The alumina phase was reduced from 36 vol% to 17 vol% (corresponding to an increase in porosity from 24 vol% to 43 vol%), showing the potential for use as a porous catalyst scaffold. This research demonstrates the potential for using additive manufacturing to produce porous FeCrAl structures capable of replacing hard-to-source FeCrAl foams.

Son, Kwangtae↗
DOE OSTI2016

FUEL PERFORMANCE MODELING OF FECRAL CLADDING FAILURE DURING LOSS OF COOLANT CONDITIONS

Accident tolerant materials are defined as those that provide significantly increased response time in the event of an accident while providing similar or improved performance as the conventional UO2/Zircaloy-4 fuel rods during normal operation. One avenue for materials to demonstrate enhanced accident tolerance is to have improved reaction (e.g., oxidation) kinetics with steam, resulting in slower hydrogen (or other combustible gases) generation rate, while maintaining acceptable thermo-mechanical properties, fuel-clad interactions, and fission product behavior. Due to their improved reaction kinetics with steam compared to Zircaloy-4, iron-chromium-aluminum (FeCrAl) alloys are being considered as an accident tolerant cladding material. In order to determine whether FeCrAl alloys are indeed accident tolerant materials, comparisons between conventional zirconium-based claddings under accident conditions is required. To this end, we have developed a burst (failure) criterion for FeCrAl using existing experimental data for first-generation alloys. This model was incorporated into the BISON fuel performance code to perform comparative studies with Zircaloy-4 cladding tubes under non-oxidizing and oxidizing LOCA conditions. The separate effects LOCA conditions considered were adopted from the PUZRY and REBEKA test series. Due to the fact that FeCrAl alloys have a larger thermal absorption cross-section and higher stiffness than Zircaloy-4, cladding thickness will be smaller for FeCrAl than for Zircaloy-4. Three different cladding thicknesses were analyzed in this work. The results indicate that for both non-oxidizing (PUZRY) and oxidizing (REBEKA) LOCA conditions, FeCrAl has similar burst behavior (i.e., time to burst and pressure at burst) as Zircaloy-4. It should be noticed that this study used data for first-generation FeCrAl alloys to develop the burst criterion. Although no burst data?currently exists for C35M (a second-generation FeCrAl alloy under development at Oak Ridge National Laboratory), improved burst behavior is anticipated. As burst data for C35M becomes available the burst criterion will be updated and the simulations revisited to determine the accident tolerance of second-generation FeCrAl alloys.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2017

Fuel performance modeling of FeCrAl cladding failure during loss of coolant conditions

Accident tolerant materials are defined as those that provide significantly increased response time in the event of an accident while providing similar or improved performance as the conventional UO2/Zircaloy-4 fuel rods during normal operation. One avenue for materials to demonstrate enhanced accident tolerance is to have improved reaction (e.g., oxidation) kinetics with steam, resulting in slower hydrogen (or other combustible gases) generation rate, while maintaining acceptable thermo-mechanical properties, fuel-clad interactions, and fission product behavior. Due to their improved reaction kinetics with steam compared to Zircaloy-4, iron-chromium-aluminum (FeCrAl) alloys are being considered as an accident tolerant cladding material. In order to determine whether FeCrAl alloys are indeed accident tolerant materials, comparisons between conventional zirconium-based claddings under accident conditions is required. To this end, we have developed a burst (failure) criterion for FeCrAl using existing experimental data for first-generation alloys. This model was incorporated into the BISON fuel performance code to perform comparative studies with Zircaloy-4 cladding tubes under non-oxidizing and oxidizing LOCA conditions. The separate effects LOCA conditions considered were adopted from the PUZRY and REBEKA test series. Due to the fact that FeCrAl alloys have a larger thermal absorption cross-section and higher stiffness than Zircaloy-4, cladding thickness will be smaller for FeCrAl than for Zircaloy-4. Three different cladding thicknesses were analyzed in this work. The results indicate that for both non-oxidizing (PUZRY) and oxidizing (REBEKA) LOCA conditions, FeCrAl has similar burst behavior (i.e., time to burst and pressure at burst) as Zircaloy-4. It should be noticed that this study used data for first-generation FeCrAl alloys to develop the burst criterion. Although no burst data?currently exists for C35M (a second-generation FeCrAl alloy under development at Oak Ridge National Laboratory), improved burst behavior is anticipated. As burst data for C35M becomes available the burst criterion will be updated and the simulations revisited to determine the accident tolerance of second-generation FeCrAl alloys.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2015

Development of ODS FeCrAl alloys for accident-tolerant fuel cladding

FeCrAl alloys are prime candidates for accident-tolerant fuel cladding due to their excellent oxidation resistance up to 1400 C and good mechanical properties at intermediate temperature. Former commercial oxide dispersion strengthened (ODS) FeCrAl alloys such as PM2000 exhibit significantly better tensile strength than wrought FeCrAl alloys, which would alloy for the fabrication of a very thin (~250 m) ODS FeCrAl cladding and limit the neutronic penalty from the replacement of Zr-based alloys by Fe-based alloys. Several Fe-12-Cr-5Al ODS alloys where therefore fabricated by ball milling FeCrAl powders with Y2O3 and additional oxides such as TiO 2 or ZrO 2 . The new Fe-12Cr-5Al ODS alloys showed excellent tensile strength up to 800 C but limited ductility. Good oxidation resistance in steam at 1200 and 1400 C was observed except for one ODS FeCrAl alloy containing Ti. Rolling trials were conducted at 300, 600 C and 800 C to simulate the fabrication of thin tube cladding and a plate thickness of ~0.6mm was reached before the formation of multiple edge cracks. Hardness measurements at different stages of the rolling process, before and after annealing for 1h at 1000 C, showed that a thinner plate thickness could likely be achieved by using a multi-step approach combining warm rolling and high temperature annealing. Finally, new Fe-10-12Cr-5.5-6Al-Z gas atomized powders have been purchased to fabricate the second generation of low-Cr ODS FeCrAl alloys. The main goals are to assess the effect of O, C, N and Zr contents on the ODS FeCrAl microstructure and mechanical properties, and to optimize the fabrication process to improve the ductility of the 2nd gen ODS FeCrAl while maintaining good mechanical strength and oxidation resistance.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Optimized Gen-II FeCrAl cladding production in large quantity for campaign testing

There are two major objectives in this report; (1) to optimize microstructure control of ATF FeCrAl alloys during tube drawing processes, and (2) to provide an update on the progress of ATF FeCrAl tube production via commercial manufacturers. Experimental efforts have been made to optimize the process parameters balancing the tube fabricability, especially for tube drawing processes, and microstructure control of the final tube products. Lab-scale sheet materials of Gen II FeCrAl alloys (Mo-containing and Nb-containing FeCrAl alloys) were used in the study, combined with a stepwise warm-rolling process and intermediate annealing, aiming to simulate the tube drawing process in a commercial tube manufacturer. The intermediate annealing at 650ºC for 1h was suggested for the tube-drawing process of Mo-containing FeCrAl alloys because it successfully softened the material by recovering the work hardening introduced through the rolling step, without inducing grain coarsening due to recrystallization. The final tube product is expected to have stabilized deformed microstructure providing the improved tensile properties with sufficient ductility. Optimization efforts on Nb-containing FeCrAl alloys focused on the effect of alloying additions and annealing conditions on the stability of deformed microstructure. Relationships between the second-phase precipitates (Fe 2 Nb-Laves phase) and microstructure stability are discussed. FeCrAl tube production through commercial tube manufacturers is currently in progress. Three different manufacturers, Century Tubes, Inc. (CTI), Rhenium Alloys, Inc. (RAI), and Superior Tube Company, Inc. (STC), are providing capabilities for cold-drawing, warm-drawing, and HPTR cold-pilgering, respectively. The first two companies are currently working on large quantity tube production (expected 250 ft length) of Gen I model FeCrAl alloy (B136Y3, at CTI) and Gen II (C35M4, at RAI), with the process parameters obtained from the experimental efforts. The expected delivery dates are at the end of July, 2016, and the middle of June, 2016, respectively. Tube production at STC would be the first attempt to apply cold-pilgering to the FeCrAl alloys. Communication has been initiated, and the materials have been machined for the cold-pilgering process.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Post-Irradiation Fracture Toughness Characterization of Generation II FeCrAl Alloys

Currently, the handbook on FeCrAl material properties contains only limited data regarding the fracture toughness properties of any FeCrAl alloy, let alone alloys currently under investigation within the Advanced Fuels Campaign (AFC) such as the Oak Ridge National Laboratory (ORNL) derived FeCrAl alloys. Unirradiated datasets developed both by ORNL and previously within literature using Charpy V-notch specimens to determine the ductile to brittle transition temperature (DBTT) showed key findings including (i) increasing Al and/or Cr content can raise the DBTT of FeCrAl alloys, (ii) DBTT values can typically reside at or above room temperature for FeCrAl alloys, and (iii) grain size and residual strain can have an effect on the fracture properties. These results suggest that the fracture toughness of FeCrAl alloys may be a factor in its deployment for nuclear power applications, but no studies have been completed prior regarding the DBTT or fracture toughness of FeCrAl alloys after neutron irradiation, especially for the leaner Cr content alloys currently under investigation as candidate alloys for light water reactor (LWR) cladding. Taken in isolation, embrittlement of a cladding alloy during service has no bearing on possible licensure. Hydriding of zirconium cladding alloys is well understood to result in significant embrittlement. Furthermore, mechanical failure of irradiated cladding containing fuel pellets occurs at far higher stresses than defueled cladding samples because the presence of the fuel toughens the fuel rod. Despite this absence of direct relevance to licensure, radiation embrittlement is a fundamental structure-property evolution that should be understood to guide further development of FeCrAl alloys. Licensure of FeCrAl incorporates far more complex system behaviors that will not be possible until larger quantities of fueled irradiated rodlets are available.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Source term analysis of FeCrAl accident tolerant fuel using MELCOR

It has been established that incremental improvements in beyond design basis accident performance can be achieved through accident tolerant fuel (ATF). However, they have the potential to recover margin with respect to conventional fuel and therefore enhance plant economics through uprate or cycle length increase. To realize this potential, it is necessary to quantify the reduction in source term due to use of ATF, and correspondingly how this is affected by increasing the cycle length and/or burnup. This requires development of a risk informed analysis methodology for ATF under high burnup conditions, which is being developed within LWRS. To this end, a MELCOR simulation of FeCrAl ATF in a recovered Large Break LOCA (LBLOCA) scenario has been developed, using a model based on the Zion Pressurized Water Reactor (PWR). The new user defined material capability, along with the inclusion of detailed neutronics- and depletion-derived parameters such as core power distribution, decay heat behavior, and fission product inventories, allows a more detailed simulation of FeCrAl clad material properties and behavior than has previously been possible using MELCOR. These detailed FeCrAl results were compared with a zircaloy clad model to investigate the differences between the two clad types and quantify the benefits of FeCrAl ATF with an 18-month cycle. Next, the fuel cycle with ATF was extended to 24 months, to determine whether any additional safety margin provided by FeCrAl ATF could be leveraged to implement high burnup FeCrAl-clad fuel while retaining the same operating and safety limits as current zircaloy-clad fuel. For the particular scenario analyzed, the delay to fuel failure from using ATF was of the same order as the LOCA recovery time, and hence significant in reducing fission product release, with the 24-month FeCrAl core performing better than the 18-month zircaloy core. It is noted that for other transients, the reduction in release due to using FeCrAl may be less significant. Furthermore, the material model developed here can be used in such further studies in support of determining the overall source term.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2015

Evaluation on the Effect of Composition on Radiation Hardening and Embrittlement in Model FeCrAl Alloys

This report details the findings of post-radiation mechanical testing and microstructural characterization performed on a series of model and commercial FeCrAl alloys to assist with the development of a cladding technology with enhanced accident tolerance. The samples investigated include model alloys with simple ferritic grain structure and two commercial alloys with minor solute additions. These samples were irradiated in the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL) up to nominal doses of 7.0 dpa near or at Light Water Reactor (LWR) relevant temperatures (300-400 C). Characterization included a suite of techniques including small angle neutron scattering (SANS), atom probe tomography (APT), and transmission based electron microscopy techniques. Mechanical testing included tensile tests at room temperature on sub-sized tensile specimens. The goal of this work was to conduct detailed characterization and mechanical testing to begin establishing empirical and/or theoretical structure-property relationships for radiation-induced hardening and embrittlement in the FeCrAl alloy class. Development of such relationships will provide insight on the performance of FeCrAl alloys in an irradiation environment and will enable further development of the alloy class for applications within a LWR environment. A particular focus was made on establishing trends, including composition and radiation dose. The report highlights in detail the pertinent findings based on this work. This report shows that radiation hardening in the alloys is primarily composition dependent due to the phase separation in the high-Cr FeCrAl alloys. Other radiation induced/enhanced microstructural features were less dependent on composition and when observed at low number densities, were not a significant contributor to the observed mechanical responses. Pre-existing microstructure in the alloys was found to be important, with grain boundaries and pre-existing dislocation networks acting as defect sinks, resulting in variations in the observed microstructures after irradiation. Dose trends were also observed, with increasing radiation dose promoting changes in the size and number density of the Cr-rich α' precipitates. Based on the microstructural analysis, performed tensile testing, and prior knowledge from FeCr literature it was hypothesized that the formation of the Cr-rich α' precipitates could lead to significant radiation-induced embrittlement in the alloys, and this could be composition dependent, a result which would mirror the trends observed for radiation-induced hardening. Due to the limited database on embrittlement in the FeCrAl alloy class after irradiation, a series of radiation experiments have been implemented. The overarching point of view within this report is the radiation tolerance of FeCrAl is complex, with many mechanisms and factors to be considered at once. Further development of the FeCrAl alloy class for enhanced accident tolerant applications requires detailed, single (or at least limited) variable experiments to fully comprehend and predict the performance of this alloy in LWRs. This report has been submitted as fulfillment of milestone M2FT-15OR0202321 titled, Summary report on the effect of composition on the irradiation embrittlement of Gen 1 ATF FeCrAl for the Department of Energy Office of Nuclear Energy, Advanced Fuel Campaign of the Fuel Cycle R&D program.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Advancements in FeCrAl Alloys for Enhanced Accident Tolerant Fuel Cladding for Light Water Reactors

Advanced FeCrAl alloys are being considered as an enhanced accident tolerant fuel (ATF) cladding for light water reactor (LWR) applications as they can exhibit slower reaction kinetics with high temperature steam and have a reduced production of hydrogen during accident scenarios compared both to historic 304L cladding and Zircaloy. Both of these attributes are key towards producing a fuel-form with enhanced accident tolerance over the current Zr-based-UO{sub 2} fuel form in deployment. A multi-year, multi-laboratory effort has been established to rapidly advance FeCrAl alloys as an ATF concept. This effort has focused on optimizing the microstructure and composition of these alloys in an attempt to provide performance on-par with or better than the current Zr-based cladding in both normal operating conditions and under accident scenarios. To date, a significant database supporting key performance factors in both scenarios has been developed. Based on this database, a compositional and microstructural window has been identified providing the insight for an optimized, advanced nuclear-grade FeCrAl alloy for LWRs. This work will provide a comprehensive overview of the systematic effort to advance FeCrAl alloys as an enhanced ATF cladding in commercial LWRs. Efforts undertaken by this multi-year, multi-laboratory program have shown the viability of using FeCrAl alloys as an ATF cladding in LWRs. Most importantly, it has been shown the oxidation resistance, decreased hydrogen production, and reduced heat generation of FeCrAl alloys strongly contribute to its ATF capability. Furthermore, it has been shown that the normal operational performance of a FeCrAl cladding can rival that of Zr-based alloys. Finally, it was found that optimizing the performance of FeCrAl cladding materials requires balancing the starting composition and microstructure in order to satisfy key performance indicators such as oxidation resistance and radiation tolerance. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2019

Full-core analysis for FeCrAl enhanced accident tolerant fuel in boiling water reactors

The impact of replacing Zircaloy with FeCrAl, a candidate enhanced accident-tolerant fuel cladding material, was evaluated for 10 × 10 boiling water reactor fuel bundles. Results from a series of full-core parametric studies estimated that replacing UO 2 /Zircaloy with UO 2 /FeCrAl would require an average enrichment increase of 0.6% 235 U throughout the fuel lattice with the cladding and channel box thicknesses halved and fuel pellet diameter increased. Full-core results indicated that UO 2 /FeCrAl models with these geometric/enrichment specifications matched the base UO 2 /Zircaloy cycle length of 527 effective full power days. Optimization studies of the full-core design established loading and control blade patterns for both Zircaloy and FeCrAl models. A side study was conducted modeling a hybrid fuel bundle consisting of FeCrAl cladding and a SiC/Ni/Cr channel box. By halving the cladding thickness, the enrichment level required was less than that of the Zircaloy base case design after performing loading pattern optimization of the hybrid bundle core. Lastly, the thermomechanical performance of a Zircaloy-cladded fuel rod was compared to that of a FeCrAl system. Results from this analysis show that, if starting from the same fuel-cladding gap thickness, a FeCrAl-clad fuel rod operates with a greater average fuel centerline temperature, comparable axial elongation and radial displacement, and longer time to gap closure compared to a Zircaloy-clad fuel rod. Furthermore, this fuel performance analysis was primarily based on the commercial Kanthal APMT FeCrAl alloy but also used available data for the C35M FeCrAl alloy developed at Oak Ridge National Laboratory.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗