Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fibre lasers”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Semiconductor disk laser-pumped subpicosecond holmium fibre laser

The first passively mode-locked holmium fibre laser has been demonstrated, with a semiconductor saturable absorber mirror (SESAM) as a mode locker. Semiconductor disk lasers have been used for the first time to pump holmium fibre lasers. We obtained 830-fs pulses at a repetition rate of 34 MHz with an average output power of 6.6 mW.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Vector solitons with a uniform polarisation state induced by polarisation filtering in a fibre laser

A fibre laser with a SESAM as a passive mode-locker is constructed for obtaining a vector soliton with the Kelly sidebands. The analysis of the peculiarities of the sidebands shows that the polarisation states are nonuniform across the entire pulse spectral profile from the leading edge to the trailing edge. Polarisation filtering effect is proposed to obtain a vector soliton with a uniform polarisation state. It is shown that during the polarisation filtering by a polariser incorporated into the laser cavity, the spectral width of the vector solitons gradually broadens and the pulse power decreases. It is found that at a maximum spectral width and a minimum pulse power, vector solitons with a uniform polarisation state are generated. (nonlinear optical phenomena)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Single-frequency, linearly polarised fibre laser with spectrally asymmetric fibre Bragg grating mirrors

A new design of a single-frequency fibre laser at a wavelength of 1.55 μm with linearly polarised output radiation is developed and investigated, in which a uniform Bragg grating written in an SMF-28 fibre is used as one mirror and the other mirror is a grating written in a Panda fibre with a small overlap of reflection spectral bands of mirrors and the possibility of fine tuning of the lasing spectral line. The length of the active part of the laser cavity formed by a fibre doped with the low-concentration Er{sup 3+} erbium ions is 10 cm. At a pump power of 60 mW and a wavelength of 1.48 μm, the lasing power reaches 100 μW and the width of the spectral line is less than 100 kHz. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Q-switched and mode-locked Er{sup 3+}-doped fibre laser using a single-multi-single fibre filter and piezoelectric

The active Q-switched and passive mode-locked Er{sup 3+}-doped all-fibre laser is presented. The fibre laser centre wavelength is located at 1563 nm and determined by the homemade singlemulti- single (SMS) in-line fibre filter. The laser spectrum width is nearly 0.1 nm. The active Q-switched mechanism relies on the polarisation state control using a piezoelectric to press a segment of passive fibre on the circular cavity. The nonlinear polarisation rotation technology is used to realise the passive self-started modelocked operation. In the passive mode-locked regimes, the output average power is 2.1 mW, repetition frequency is 11.96 MHz, and single pulse energy is 0.18 nJ. With the 100-Hz Q-switched regimes running, the output average power is 1.5 mW. The total Q-switched pulse width is 15 μs, and every Q-switched pulse is made up by several tens of mode-locked peak pulses. The calculated output pulse energy of the Q-switched fibre laser is about 15 μJ, and the energy of every mode-locked pulse is about 64–68 nJ during a Q-switched pulse taking into account the power fraction propagating between pulses. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Power scaling of Tm-doped fibre lasers using an all-fibre composite Michelson-type cavity

We report a 4-W all-fibre Tm-doped fibre laser using a composite cavity with a centre wavelength of 1952.02 nm. The composite cavity consists of two interferometric laser arms that are efficiently combined. Each interferometric laser arm contains a double-clad Tm-doped silica fibre operating in cw mode and pumped by pigtailed laser diodes with a centre wavelength of 793 nm. A high combining efficiency of 93.9 % and a narrow linewidth of 0.1 nm are obtained. The output power of the laser can be scaled straight forwardly by improving the pump power and optimising the component parameters at 2 μm (control of laser radiation parameters)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Single-walled carbon nanotube tunable mode-locked soliton fibre laser

A soliton fibre laser with a tunable mode-locked output is proposed and demonstrated. The laser is based on a conventional erbium-doped fibre and uses single-walled carbon nanotubes (SWCNTs) as a saturable absorber (SA). Tuning is performed using a tunable Mach – Zehnder filter (TMZF). The SWCNT-based SA has a modulation depth of ∼19.0 % and saturation intensity of 45.3 MW cm{sup −2}. Mode-locking begins at a pump power of 6.0 mW and allows pulsed outputs to be generated from 1550 nm to 1566 nm. The 3 dB bandwidth and pulse duration of the output pulse vary slightly from 6.34 nm to 6.90 nm and from 0.51 ps to 0.56 ps, respectively, which results in the corresponding time-bandwidth product varying from 0.40 to 0.46. The results suggest that the proposed laser would have significance advantages in many applications, particularly spectroscopy and telecommunications. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Autodyne effect in a single-mode Er fibre laser and the possibility of its usage for recognising the evaporated biotissue type

The autodyne signal arising in an Er fibre laser in the course of evaporating biological models of different types is studied and the possibility of recognising the biotissue type using the method of autodyne detection of the backscattered Doppler signal is assessed. In the experiments we modelled the process of surgical intervention using the contact (hole perforation with the Er laser fibre) and noncontact (surface evaporation with the focused radiation) regimes of impact on different biological models. The amplitude – frequency characteristic of the autodyne detection for the Er fibre laser is measured and the initial spectra of the backscattered Doppler signal arising under the action of laser radiation on the samples of biological models are obtained. The experiments have shown that the spectra of the backscattered Doppler signal, arising in the course of the contact and noncontact action of the Er fibre laser on different biological models, demonstrate clear-cut distinctions. (control of laser radiation parameters)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Q-switching of a thulium-doped fibre laser using a holmium-doped fibre saturable absorber

We have proposed and demonstrated a new passively Q-switched thulium-doped fibre laser configuration. A distinctive feature of this configuration is the use of a heavily holmium-doped fibre for Q-switching. Lasing was obtained at 1.96 μm, with a pulse energy of 3 μJ and pulse duration of 600 ns. The highest pulse repetition rate was 80 kHz. (control of laser radiation parameters)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Study of a Tm:Ho:YLF laser pumped by a Raman shifted erbium-doped fibre laser at 1678 nm

The lasing, spectral, and luminescent characteristics of a Tm:Ho:YLF laser pumped by a Raman shifted erbium-doped fibre laser ({lambda} = 1678 nm) into the 1682-nm absorption line of the {sup 3}H{sub 6}-{sup 3}F{sub 4} transition of the Tm{sup 3+} ion are studied. It is shown that the total (with respect to the absorbed power) and slope laser efficiencies upon pulsed pumping reach 46% and 50%, respectively. The output radiation power in the cw regime is 400 mW. The comparative measurements showed that pumping by a fibre laser at 1678 nm is more efficient than diode pumping at 792 nm. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

High-energy pulsed fibre laser based on a two-fibre assembly

We demonstrate for the first time a relatively simple fibre laser system with a passively Q-switched master oscillator and a polarised output pulse energy of up to 110 {mu}J at 1080 nm. The system is pumped by a single 12-W multimode cw source at 980 nm. Depending on the pump power, the pulse duration varies from 280 ns to 1.8 {mu}s and the pulse repetition rate, from 45 to 140 kHz. The maximum average output power is 5 W. The system has been tested for its performance in metal and glass processing. (lasers and amplifiers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of the active-ion concentration on the lasing dynamics of holmium fibre lasers

The lasing dynamics of fibre lasers with a core based on quartz glass doped with holmium ions to concentrations in the range of 10{sup 19}-10{sup 20} cm{sup -3} is investigated. It is shown that fibre lasers with a high concentration of active holmium ions generate pulses, but a decrease in the holmium concentration changes the lasing from pulsed to cw regime. At the same time, a decrease in the active-ion concentration and the corresponding increase in the fibre length in the cavity reduce the lasing efficiency. (lasers)

36 MATERIALS SCIENCE↗

High-power cw visible lasers pumped by Raman fibre lasers

This paper describes cw visible lasers having an output power above 10 W and emitting at wavelengths of 561, 589 and 623 nm. An approach is proposed for obtaining single-mode cw visible laser light with a power above 10 W at any wavelength in the range 560−660 nm. (paper)

42 ENGINEERING↗

Low frequency noise distributed-feedback ytterbium fibre laser

We report a single-frequency 1-W fibre laser source emitting at 1093 nm, composed of a distributed-feedback ytterbium fibre laser and fibre-optic amplifier. The laser frequency was stabilised by side-locking to a transmission peak of a Fabry - Perot interferometer, and the residual frequency noise spectrum of the laser was measured. Our results indicate that the laser linewidth can be narrowed down below 1 kHz. (lasers)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optomechanical interaction in fibre lasers with micro-optomechanical resonance structures

We report the results of studies of fibre lasers with passive modulators based on light-excited micro-optomechanical resonance structures (micro-oscillators). It is shown that in fibre lasers based on active fibres doped with rare-earth elements (Er, Er/Yb, Yb, Nd), the optomechanical interaction of laser radiation with micro-oscillators of various types (fibre-optic, microvolume) leads to self-oscillations of the characteristics of laser radiation at frequencies of relaxation oscillations and intermode beats synchronised with the frequencies of elastic eigenoscillations of micro-oscillators. It is found that in an ultra-long erbium – ytterbium fibre laser with a nonlinear mirror based on a microcantilever, laser photothermal excitation of the second mode of elastic transverse oscillations of the microcantilever makes it possible to perform passive mode locking exclusively due to Q-switching of the laser cavity. Pulsed lasing with a controlled repetition rate (∼76 kHz), a pulse duration of 2 – 5 μs and an output energy of 0.1 μJ per pulse is implemented. Based on a simplified physical model of the indicated fibre lasers with micro-oscillators, we have developed an approximate mathematical model describing the regimes of passive mode locking of fibre lasers with micro-oscillators that play the role of mirrors with a nonlinear reflection coefficient in the laser cavity. The prospects for the development and application of the considered laser systems are discussed. (control of laser radiation parameters)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Polarisation effects in twin-core fibre: Application for mode locking in a fibre laser

We report the first measurements of the longitudinal power distribution in a twin-core optical fibre at different input light polarisations. Experimental evidence is presented that, because of the difference in birefringence between the cores, the power in them depends on which core the beam is launched into. Experimental data are interpreted in terms of a modified polarisation model for mode coupling in twin-core fibres which takes into account the birefringence of the cores. In addition, we demonstrate for the first time the use of the polarisation properties of a twincore fibre for mode locking in a fibre laser. (optical fibres, lasers and amplifiers. properties and applications)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Use of rare-earth elements to achieve wavelength-selective absorption in high-power fibre lasers

We have studied absorption spectra of optical fibres doped with rare-earth ions (Sm{sup 3+}, Tm{sup 3+}, Tb{sup 3+}, Pr{sup 3+} and Ho{sup 3+}) and demonstrated that they are potentially attractive for ensuring wavelength-selective absorption in fibre lasers. Such fibres can be used for pump diode protection against back-reflected light at the operating wavelength of neodymium, erbium, erbium – ytterbium or thulium lasers. A proper choice of a rare-earth element makes it possible to ensure a strong absorption (10 – 20 dB) at the operating laser wavelength in combination with high transmission (loss under a few tenths of a decibel) at pump wavelengths. To demonstrate the potential of the proposed approach, we have fabricated and investigated Tm{sup 3+}-doped fibre compatible with the output fibre pigtails of standard semiconductor diodes used for pumping (core diameter, 105 μm; numerical aperture, 0.22). We have demonstrated the possibility of effectively suppressing light in the 1550-nm range by more than 20 dB even in the case of a high-power (up to 10 W) undesirable signal. Under such conditions, the total pump loss does not exceed 0.5 dB and can be further reduced by optimising the core composition and fibre design. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Holmium fibre laser emitting at 2.21 {mu}m

A holmium fibre laser emitting at 2.21 {mu}m has been demonstrated. This wavelength is the longest for silica-based fibre lasers. The output power of the laser is 130 mW. (lasers)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗