Search NASA⌕ Search

SEARCH · Search NASA

Results for “Finite-volume”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1981

Accelerated finite-volume calculation of transonic potential flows

A fully conservative finite-volume algorithm is used to calculate transonic potential flows past isolated airfoils and through two-dimensional channels. The difference equations are solved by a multigrid technique which uses an alternating direction implicit method as a smoothing algorithm. The finite-volume formulation provides a framework within which to treat flows past complicated geometries, while the multigrid/alternating direction scheme provides rapid convergence of the solution to very small residuals.

Jameson, A.↗
NASA NTRS1982

A vectorized, finite-volume, adaptive grid algorithm applied to planetary entry problems

An adaptive grid, finite-volume method has been applied to problems in planetary entry for computing complete flowfields. The adaption algorithm is implicit in nature and is keyed to resolve user specified gradients. The finite-volume algorithm is explicit, utilizing a maximum time step advancement at each grid point to accelerate convergence to the steady state. The present version of the code is for the laminar flow of a perfect gas. The role of the adaption algorithm in resolving various features of blunt body/wake flow for planetary entry conditions is emphasized.

Gnoffo, P. A.↗
NASA NTRS1983

A time-split finite-volume algorithm for three-dimensional flow-field simulation

A general finite-volume algorithm is developed for solving three-dimensional, time-dependent, compressible Navier-Stokes equations for high Reynolds number flows over an arbitrary geometry. This algorithm adapts MacCormack's (1982) explicit-implicit scheme to a time-split, three-dimensional finite-volume concept in a general coordinate system. It is shown that the thin-layer approximation in all three spatial directions significantly reduces the evaluation of viscous terms and allows the algorithm to solve more complicated geometries with all boundaries in two or all three directions. The calculated results using this method are found to be in good agreement with the experimental measurements of a blunt-fin induced shock wave and boundary-layer interaction problems. Observations of the existence of peak pressure, primary horseshoe and secondary vortices, and reversed supersonic zones show that computational fluid dynamics can effectively supplement the wind tunnel tests for aerodynamic design as well as for understanding basic fluid dynamics.

Hung, C. M.↗
NASA NTRS1976

Split Space-Marching Finite-Volume Method for Chemically Reacting Supersonic Flow

A space-marching finite-volume method employing a nonorthogonal coordinate system and using a split differencing scheme for calculating steady supersonic flow over aerodynamic shapes is presented. It is a second-order-accurate mixed explicit-implicit procedure that solves the inviscid adiabatic and nondiffusive equations for chemically reacting flow in integral conservation-law form. The relationship between the finite-volume and differential forms of the equations is examined and the relative merits of each discussed. The method admits initial Cauchy data situated on any arbitrary surface and integrates them forward along a general curvilinear coordinate, distorting and deforming the surface as it advances. The chemical kinetics term is split from the convective terms which are themselves dimensionally split, thereby freeing the fluid operators from the restricted step size imposed by the chemical reactions and increasing the computational efficiency. The accuracy of this splitting technique is analyzed, a sufficient stability criterion is established, a representative flow computation is discussed, and some comparisons are made with another method.

Rizzi, Arthur W.↗
NASA NTRS1973

Time-split finite-volume method for three-dimensional blunt-body flow

An efficient numerical method for calculating plane, axisymmetric, and fully three-dimensional blunt-body flow is presented. It is a second-order-accurate, time-dependent finite-volume procedure that solves the Euler equations in integral conservation-law form. These equations are written with respect to a Cartesian coordinate system in which an embedded mesh adjusts in time to the motion of the bow shock that is automatically captured as part of the weak solution. With such an adjusting mesh, oscillations in flow properties near the shock are shown to be virtually eliminated. The scheme uses a time-splitting concept that accelerates the convergence appreciably. Comparisons are made between computed and experimental results.

Rizzi, A. W.↗
NASA NTRS1976

Finite-volume solution of the Euler equations for steady three-dimensional transonic flow

A numerical finite-volume method is proposed for solving the Euler equations of a steady three-dimensional flow. The subsonic regions embedded in steady supersonic flow about aircraft are computed by introducing a time-dependent coordinate system that maps the fuselage and wing into one coordinate surface. The suitability of the method to a delta-winged aircraft is demonstrated, and its applicability to rectangular-winged aircraft and problems in internal transonic flow is pointed out.

Rizzi, A.↗
NASA NTRS1977

Parallel computation of unsteady, three-dimensional, chemically reacting, nonequilibrium flow using a time-split finite-volume method on the Illiac IV

A description is presented of the split finite-volume method which is a viable numerical procedure for performing with the aid of a modern special purpose vector computer numerical simulation studies of complicated flow fields, including chemical reactions, about geometrically complex bodies. Such numerical studies are needed for the development of atmospheric entry vehicles such as the space shuttle. The equations which are approximated are quite general and can be used in studies of combustion, pollution, and other chemically reacting flow phenomena, where convective transport effects dominate the influence of radiative, viscous, and other transport mechanisms. The shock perturbed flow about a shuttle orbiter flying at a large angle of attack during atmospheric entry is illustrated. The method uses a time splitting of the convection differencing operator to achieve efficient data management.

Reinhardt, W. A.↗
NASA NTRS1979

Recent progress in finite-volume calculations for wing-fuselage combinations

Progress in the application of finite-volume methods to the calculation of transonic potential flows past general wing-body combinations is reviewed. Two different methods of generating boundary-conforming grids are investigated, and the results compared to provide an estimate of solution sensitivity to grid geometry. Both conservative and quasi-conservative difference schemes are used in one of the coordinate systems. Results show that the error introduced by the quasi-conservative formulation seems to be small, although a one-dimensional analysis suggests that schemes of this type do not necessarily produce mass-conserving shocks. Comparison of calculated results with experimental data for realistic fuselage geometries clearly shows the importance of modelling the effect of fuselage geometry upon the wing pressure distribution.

Caughey, D. A.↗
NASA NTRS1981

Basic advances in the finite-volume method for transonic potential flow calculations

The finite-volume method of Jameson and Caughey provides a framework within which it is possible to calculate transonic potential flows about essentially arbitrary geometrical configurations. Improvements designed to increase the accuracy of the basic scheme and its consistency in the far field will be described. These include the incorporation of an artificial viscosity which maintains the formal second-order accuracy of the scheme in supersonic zones, and a modification of the flux balances to allow the free-stream conditions to satisfy the difference equations identically. Results of calculations illustrating the importance of these effects will be presented.

Caughey, D. A.↗
NASA NTRS1982

A vectorized, finite-volume, adaptive-grid algorithm for Navier-Stokes calculations

An adaptive grid, finite-volume method has been used to solve the Navier-Stokes equations for complete (forebody and afterbody) flowfields around blunt bodies. The code, which is applicable for axisymmetric or two-dimensional flows, allows the mesh to adjust during the computation to provide a closer spacing of mesh points in regions of high gradients, thus minimizing the number of required computational points. The solution technique is explicit, utilizing a maximum time-step advancement at each grid point to accelerate convergence to the steady state. The code has been fully vectorized for efficient solution on the CYBER 203 computer. A very flexible rezoning routine is used to concentrate mesh points anywhere in the field, either by a user-defined weighting function or by allowing high gradient regions to adjust the grid. The grid adjustment routine is implicit in nature and represents a very small portion of the total computational cost. Currently, the code runs in approximately 0.000016 seconds per grid point per iteration.

Gnoffo, P. A.↗
NASA NTRS1976

A numerical solution of the axisymmetric jet counterflow problem

A numerical computation of a normal shock case in which the shock waves and shear layers are modeled as normal and tangential discontinuities bounding the regions of an inviscid flow is discussed. Within these regions the unsteady gasdynamic equations are solved in finite-volume form on a moving computational mesh. The positions of discontinuities are determined from the jump conditions. The results obtained for values of the ratio of jet total pressure to free-stream total pressure ranging from 10.0 to 100.0 are found to be in agreement with the experimental results obtained by Fleeman and Nelson (1974).

Schiff, L. B.↗
NASA NTRS1981

Numerical method for gas dynamics combining characteristic and conservation concepts

An efficient implicit numerical method that solves the compressible Navier-Stokes equations in arbitrary curvilinear coordinates by the finite-volume technique is presented. An intrinsically dissipative difference scheme and a fully implicit treatment of boundary conditions, based on characteristic and conservation concepts, are used to improve stability and accuracy. Efficiency is achieved by using a diagonal form of the implicit algorithm and spatially varying time-steps. Comparisons of various schemes and methods are presented for one- and two-dimensional flows, including transonic separated flow past a thick circular-arc airfoil in a channel. The new method is equal to or better than a version of MacCormack's hybrid method in accuracy and it converges to a steady state up to an order of magnitude faster.

Coakley, T. J.↗
NASA NTRS1982

Singularity embedding method in potential flow calculations

The so-called H-type mesh is used in a finite-element (or finite-volume) calculation of the potential flow past an airfoil. Due to coordinate singularity at the leading edge, a special singular trial function is used for the elements neighboring the leading edge. The results using the special singular elements are compared to those using the regular elements. It is found that the unreasonable pressure distribution obtained by the latter is removed by the embedding of the singular element. Suggestions to extend the present method to transonic cases are given.

Jou, W. H.↗
NASA NTRS1982

Transonic potential flow and coordinate generation for bodies in a wind tunnel

An accurate method has been developed for computation of transonic potential flow about a 2-D lifting airfoil or an axisymmetric body in a wind tunnel. The computational mesh is nearly orthogonal everywhere and is generated by a sequence of Schwarz-Christoffel transformations and shearings to obtain an '0' grid near the body. A conservative finite-volume scheme for the full-potential equation and exact boundary conditions is used together with 'retarded' density to solve efficiently transonic flow with embedded shocks and large regions of supersonic flow. Supersonic free-stream flows are also solved with captured bow shocks and embedded subsonic regions.

Doria, M. L.↗
NASA NTRS1981

International Conference on Numerical Methods in Fluid Dynamics, 7th, Stanford University, Stanford and Moffett Field, CA, June 23-27, 1980, Proceedings

Topics discussed include polygon transformations in fluid mechanics, computation of three-dimensional horseshoe vortex flow using the Navier-Stokes equations, an improved surface velocity method for transonic finite-volume solutions, transonic flow calculations with higher order finite elements, the numerical calculation of transonic axial turbomachinery flows, and the simultaneous solutions of inviscid flow and boundary layer at transonic speeds. Also considered are analytical solutions for the reflection of unsteady shock waves and relevant numerical tests, reformulation of the method of characteristics for multidimensional flows, direct numerical simulations of turbulent shear flows, the stability and separation of freely interacting boundary layers, computational models of convective motions at fluid interfaces, viscous transonic flow over airfoils, and mixed spectral/finite difference approximations for slightly viscous flows.

Reynolds, W. C.↗
NASA NTRS1978

Recent experiences with three-dimensional transonic potential flow calculations

Some recent experiences with computer programs capable of solving finitie-difference approximations to the full potential equation for the transonic flow past three dimensional swept wings and simple wing-fuselage combinations are discussed. The programs used are a nonconservative program for swept wings, a quasi-conservative finite-volume program capable of treating swept wings mounted on fuselages of slowly varying circular cross section, and a fully conservative finite volume scheme capable of treating swept wings and wing-cylinder combinations. The present capabilities of these codes are reviewed. The relative merits of the conservative and nonconservative formulations are discussed, and the results of calculations including corrections for the boundary-layer displacement effect are presented.

Caughey, D. A.↗
NASA NTRSDate not supplied

Aerothermal Shape Optimization of Actively-Cooled Battery Packs using Conjugate Heat Transfer

Thermal management for battery is important for electric aircraft because battery temperature is critically important to vehicle safety, and it also has direct impact on the efficiency of the battery system. Because ambient air is a readily available resource for aircraft, this paper considers an active cooling concept with forced convection of ambient air through the battery pack. Conjugate heat transfer analysis is used to solve the coupled aero-thermal problem, which consists of a finite-volume computational fluid dynamics solver for the fluid domain, and a conduction heat transfer solver for the solid domain. A mixed Neumann and Dirichlet boundary condition is developed for the fluid-solid interface, which allows the solid domain to completely submerge in the fluid domain. A gradient-based optimization method is adopted, and the discrete adjoint approach implemented in DAFoam is used to efficiently compute the gradients. The aero-thermal coupling for primal analysis and gradient computation is handled using the OpenMDAO-based MPhys framework. A constant heat source is prescribed for the battery cells, and the battery shape (design variable) is optimized to minimize cooling pump power and battery weight (composite objective function) while keeping the battery temperature below a threshold (constraint). The optimized design achieves a 44.6% and 1.5% reduction in the cooling pump power and battery weight, respectively, and the maximal temperature constraint is satisfied. This work has the potential to reduce battery-pack weight, improve performance, and reduce the weight of thermal management systems for electric vertical take-off and landing aircraft.

thermal management↗