Search NASA⌕ Search

SEARCH · Search NASA

Results for “Flamelet model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Modeling turbulence–chemistry interaction in lean premixed hydrogen flames with a strained flamelet model

Premixed flames in the thin and broken reaction zones regime exhibit strong non-linear turbulence–chemistry interactions and are hence challenging to model. In the present study, a direct numerical simulation (DNS) database for a hydrogen–air flame is used to understand the effect of turbulence–chemistry interactions on the flame speed. To this end, statistics of the local flame front displacement speed are investigated and the roles of flame stretch due to curvature and strain are analyzed. The local flame speed is found to be on average around 30% lower than the laminar burning velocity, which is shown to be a consequence of strain. Strain effects are then modeled by a recently proposed strained flamelet model, which is validated a priori against the DNS in terms of the flame speed and the reaction source term. The strained flamelet model leads to a moderate improvement of the flame speed prediction and is able to reproduce the decrease of the local flame speed. Moreover, it significantly improves the source term closure, which is demonstrated on the basis of the optimal estimator approach and, overall, describes the investigated DNS flame with very good accuracy.

Energy & Fuels↗

GPU-accelerated Software Library for Unsteady Flamelet Modeling of Turbulent Combustion with Complex Chemical Kinetics

Modeling and simulation of turbulent combustion are computationally demanding and challenging problems due to the complexity of turbulent flows and the complex chemical reaction kinetics. Recent advances in high performance computing (HPC) has allowed simulations to utilize increasing computer power to obtain newer insights that were not feasible before. The arrival of GPUs and many-core processors is set to revolutionize the HPC landscape. This paper presents an unsteady flamelet software library developed for utilizing GPUs as an onboard accelerator while the flow solver continues to run on conventional host processors using legacy software. The software was architected to expose multiple levels of parallelism and concurrency available in the unsteady flamelet model which is also necessary to realize the full potential of these accelerators. While the model and its coupling with the flow solver have been known for some time, the potential to target these models and libraries for newer HPC architectures provides a greater incentive for pursuing combustion model development.

Sankaran, Ramanan↗

A Novel In Situ Flamelet Tabulation Methodology for the Representative Interactive Flamelet Model

A priori flamelet tabulation methods have been used extensively to model premixed and non-premixed combustion in Reynolds Averaged Navier-Stokes (RANS) and Large Eddy Simulations (LES). Pre-tabulation of flamelet libraries have led to significant cost reduction of CFD simulations. However, these tabulation methods rely on certain simplifying assumptions. The dimensionality of the flamelet manifolds and size of flamelet libraries are also constrained due to memory and computational limitations. This limits the applicability and predictive capability of flamelet models. The traditional representative interactive flamelet (RIF) approach with multiple flamelets on the other hand involves online solution of flamelet equations and presumed PDF integration at each computational cell making it attractive but computationally expensive and not suitable for LES with large cell counts. The current work discusses the development of a novel methodology that combines the advantages of an online flamelet solver along with the computational efficacy of tabulated models. The novel in situ tabulation approach consists of creating a flamelet table at each computational time step using the unsteady flamelet equations. The flamelets are then integrated in real time based on their respective scalar dissipation rate histories. This approach is capable of including history effects and unsteady chemical kinetic effects as it involves the online solution of unsteady flamelets. Implementation and comprehensive validation of the new framework is carried out against gas jet flames as well as spray flames at high pressures. The approach is first validated for a partially premixed methane gas-jet flame in a RANS framework. The temperature and species mass fractions are compared against experimental results at different locations of a lifted flame. The approach is able to capture the transient flame characteristics. The model is then validated against an n -dodecane spray flame at high pressures in a LES framework with a 103 species n -dodecane chemistry mechanism. The model is able to capture ignition delays and flame liftoff of the n -dodecane spray over varying ambient temperature conditions. Due to the offsetting of presumed PDF integration cost, the proposed framework is shown to be faster than the traditional RIF approach and the speedup over RIF increases with an increase in the cell count. Furthermore, this framework enables use of the RIF model for large cell count LES simulations.

42 ENGINEERING↗

Flamelet Model Application for Non-Premixed Turbulent Combustion

The current Final Report contains results of the study which was performed in Scientific Research Center 'ECOLEN' (Moscow, Russia). The study concerns the development and verification of non-expensive approach for modeling of supersonic turbulent diffusion flames based on flamelet consideration of the chemistry/turbulence interaction (FL approach). Research work included: development of the approach and CFD tests of the flamelet model for supersonic jet flames; development of the simplified procedure for solution of the flamelet equations based on partial equilibrium chemistry assumption; study of the flame ignition/extinction predictions provided by flamelet model. The performed investigation demonstrated that FL approach allowed to describe satisfactory main features of supersonic H 2/air jet flames. Model demonstrated also high capabilities for reduction of the computational expenses in CFD modeling of the supersonic flames taking into account detailed oxidation chemistry. However, some disadvantages and restrictions of the existing version of approach were found in this study. They were: (1) inaccuracy in predictions of the passive scalar statistics by our turbulence model for one of the considered test cases; and (2) applicability of the available version of the flamelet model to flames without large ignition delay distance only. Based on the results of the performed investigation, we formulated and submitted to the National Aeronautics and Space Administration our Project Proposal for the next step research directed toward further improvement of the FL approach.

Secundov, A.↗

Implementation of two-equation soot flamelet models for laminar diffusion flames

The two-equation soot model proposed by Leung et al. [K.M. Leung, R.P. Lindstedt, W.P. Jones, Combust. Flame 87 (1991) 289-305] has been derived in the mixture fraction space. The model has been implemented using both Interactive and Non-Interactive flamelet strategies. An Extended Enthalpy Defect Flamelet Model (E-EDFM) which uses a flamelet library obtained neglecting the soot formation is proposed as a Non-Interactive method. The Lagrangian Flamelet Model (LFM) is used to represent the Interactive models. This model uses direct values of soot mass fraction from flamelet calculations. An Extended version (E-LFM) of this model is also suggested in which soot mass fraction reaction rates are used from flamelet calculations. Results presented in this work show that the E-EDFM predict acceptable results. However, it overpredicts the soot volume fraction due to the inability of this model to couple the soot and gas-phase mechanisms. It has been demonstrated that the LFM is not able to predict accurately the soot volume fraction. On the other hand, the extended version proposed here has been shown to be very accurate. The different flamelet mathematical formulations have been tested and compared using well verified reference calculations obtained solving the set of the Full Transport Equations (FTE) in the physical space. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Laminar flamelet modeling of turbulent diffusion flames

In modeling turbulent combustion, decoupling the chemistry from the turbulence is of great practical significance. In cases in which the equilibrium chemistry model breaks down, laminar flamelet modeling (LFM) is a promising approach to decoupling. Here, the validity of this approach is investigated using direct numerical simulation of a simple chemical reaction in two-dimensional turbulence.

Mell, W. E.↗

Study of Turbulent Premixed Flame Propagation using a Laminar Flamelet Model

The laminar flamelet concept in turbulent reacting flows is considered applicable to many practical combustion systems (Linan & Williams 1993). For turbulent premixed combustion, the laminar flamelet regime is valid when turbulent Karlovitz number is less than unity, which is equivalent to stating that the characteristic thickness of the flame is less than that of a Kolmogorov eddy; this is known as the Klimov-Williams criterion (Williams 1985). In such a case, the flame maintains its laminar structure, and the effect of turbulent flow is merely to wrinkle and strain the flame front. The propagating wrinkled premixed flame can then be described as an infinitesimally thin surface dividing the unburnt fresh mixture and the burnt product.

Im, H. G.↗

A Priori Analysis of a Compressible Flamelet Model using RANS Data for a Dual-Mode Scramjet Combustor

In an effort to make large eddy simulation of hydrocarbon-fueled scramjet combustors more computationally accessible using realistic chemical reaction mechanisms, a compressible flamelet/progress variable (FPV) model was proposed that extends current FPV model formulations to high-speed, compressible flows. Development of this model relied on observations garnered from an a priori analysis of the Reynolds-Averaged Navier-Stokes (RANS) data obtained for the Hypersonic International Flight Research and Experimentation (HI-FiRE) dual-mode scramjet combustor. The RANS data were obtained using a reduced chemical mechanism for the combustion of a JP-7 surrogate and were validated using avail- able experimental data. These RANS data were then post-processed to obtain, in an a priori fashion, the scalar fields corresponding to an FPV-based modeling approach. In the current work, in addition to the proposed compressible flamelet model, a standard incompressible FPV model was also considered. Several candidate progress variables were investigated for their ability to recover static temperature and major and minor product species. The effects of pressure and temperature on the tabulated progress variable source term were characterized, and model coupling terms embedded in the Reynolds- averaged Navier-Stokes equations were studied. Finally, results for the novel compressible flamelet/progress variable model were presented to demonstrate the improvement attained by modeling the effects of pressure and flamelet boundary conditions on the combustion.

Quinlan, Jesse R.↗

A two-equation soot-in-flamelet modeling approach applied under Spray A conditions

Soot production (including formation and oxidation) is studied in the transient, high-pressure and turbulent n-dodecane Spray A flames from the Engine Combustion Network (ECN) using computational fluid dynamics (CFD) simulations. A two-equation soot-in-flamelet modeling approach is applied within the framework of the Unsteady Flamelet Progress Variable (UFPV) model and results are validated against experimental data. Equations for soot mass fraction and soot number density derived in the mixture fraction space are solved in the context of detailed flamelet calculations. Source terms for the different steps in the soot chemistry are tabulated and incorporated in the flamelet manifold. For the reference condition, the modeling approach based on the tabulated flamelet manifold reduces the computational cost of a CFD calculation by approximately 40 times compared to a non-tabulated well-mixed (WM) modeling approach. The soot-in-flamelet approach is then extended to study the effect of ambient oxygen concentration, ambient mixture composition and ambient temperature on soot production. Results show that the modeling approach is able to capture the experimental trends for the soot volume fraction (SVF) with good quantitative agreement, especially in the soot ramp-up region.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of the ignition processes of a multi-injection flame in a Diesel engine environment using the flamelet model

In this paper, the first flamelet analysis is conducted of a highly resolved DNS of a multi-injection flame with both auto-ignition and ignition induced by flame-flame interaction. A novel method is proposed to identify the different combustion modes of ignition processes using generalized flamelet equations. The state-of-the-art DNS database generated by Rieth et al. (US National Combustion Meeting, 2019) for a multi-injection flame in a Diesel engine environment is investigated. Three-dimensional flamelets are extracted from the DNS at different time instants with a focus on auto-ignition and interaction-ignition processes. The influences of mixture field interactions and the scalar dissipation rate on the ignition process are investigated by varying the species composition boundary conditions of the transient flamelet equations. Budget analyses of the generalized flamelet equations show that the transport along the mixture fraction iso-surface is insignificant during the auto-ignition process, but becomes important when interaction-ignition occurs, which is further confirmed through a flamelet regime classification method.

42 ENGINEERING↗

Assessment of various tar and soot treatment methods and a priori analysis of the steady laminar flamelet model for use in coal combustion simulation

Soot formed in the fuel-rich regions of coal flames is known to have a significant impact on the radiative heat transfer characteristics of the flame. It is therefore important to account for the effect of soot radiation when simulating coal combustion systems. Several recent coal combustion studies have used acetylene as a surrogate for devolatilized tar and neglect soot formation altogether, while others have utilized empirical models for tar and soot or even chemical mechanisms which include tar and soot as species. In this work, we investigate several methods of treating coal-derived tar and soot and the impact each treatment has on predicted furnace temperature, particle mass loss, and other quantities of interest. Furthermore, we perform a priori comparisons of simulation results to calculations from a steady laminar flamelet model in order to assess the accuracy of a flamelet approach for each tar and soot treatment considered. Data used as a basis for the study is generated through One-Dimensional Turbulence (ODT) simulation of a coal combustion system in which high- fidelity models are used for gas phase chemistry and devolatilization, where char combustion is neglected.

97 MATHEMATICS AND COMPUTING↗

Statistics for laminar flamelet modeling

Statistical information required to support modeling of turbulent premixed combustion by laminar flamelet methods is extracted from a database of the results of Direct Numerical Simulation of turbulent flames. The simulations were carried out previously by Rutland (1989) using a pseudo-spectral code on a three dimensional mesh of 128 points in each direction. One-step Arrhenius chemistry was employed together with small heat release. A framework for the interpretation of the data is provided by the Bray-Moss-Libby model for the mean turbulent reaction rate. Probability density functions are obtained over surfaces of the constant reaction progress variable for the tangential strain rate and the principal curvature. New insights are gained which will greatly aid the development of modeling approaches.

Cant, R. S.↗

Using the tabulated diffusion flamelet model ADF-PCM to simulate a lifted methane-air jet flame

Two formulations of a turbulent combustion model based on the approximated diffusion flame presumed conditional moment (ADF-PCM) approach [J.-B. Michel, O. Colin, D. Veynante, Combust. Flame 152 (2008) 80-99] are presented. The aim is to describe autoignition and combustion in nonpremixed and partially premixed turbulent flames, while accounting for complex chemistry effects at a low computational cost. The starting point is the computation of approximate diffusion flames by solving the flamelet equation for the progress variable only, reading all chemical terms such as reaction rates or mass fractions from an FPI-type look-up table built from autoigniting PSR calculations using complex chemistry. These flamelets are then used to generate a turbulent look-up table where mean values are estimated by integration over presumed probability density functions. Two different versions of ADF-PCM are presented, differing by the probability density functions used to describe the evolution of the stoichiometric scalar dissipation rate: a Dirac function centered on the mean value for the basic ADF-PCM formulation, and a lognormal function for the improved formulation referenced ADF-PCM{chi}. The turbulent look-up table is read in the CFD code in the same manner as for PCM models. The developed models have been implemented into the compressible RANS CFD code IFP-C3D and applied to the simulation of the Cabra et al. experiment of a lifted methane jet flame [R. Cabra, J. Chen, R. Dibble, A. Karpetis, R. Barlow, Combust. Flame 143 (2005) 491-506]. The ADF-PCM{chi} model accurately reproduces the experimental lift-off height, while it is underpredicted by the basic ADF-PCM model. The ADF-PCM{chi} model shows a very satisfactory reproduction of the experimental mean and fluctuating values of major species mass fractions and temperature, while ADF-PCM yields noticeable deviations. Finally, a comparison of the experimental conditional probability densities of the progress variable for a given mixture fraction with model predictions is performed, showing that ADF-PCM{chi} reproduces the experimentally observed bimodal shape and its dependency on the mixture fraction, whereas ADF-PCM cannot retrieve this shape. (author)

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Unsteady Three-Dimensional Simulation of a Shear Coaxial GO2/GH2 Rocket Injector with RANS and Hybrid-RAN-LES/DES Using Flamelet Models

Historically, the analysis and design of liquid rocket engines (LREs) has relied on full‐scale testing and one‐dimensional empirical tools. The testing is extremely expensive and the one‐dimensional tools are not designed to capture the highly complex, and multi‐dimensional features that are inherent to LREs. Recent advances in computational fluid dynamics (CFD) tools have made it possible to predict liquid rocket engine performance, stability, to assess the effect of complex flow features, and to evaluate injector‐driven thermal environments, to mitigate the cost of testing. Extensive efforts to verify and validate these CFD tools have been conducted, to provide confidence for using them during the design cycle. Previous validation efforts have documented comparisons of predicted heat flux thermal environments with test data for a single element gaseous oxygen (GO2) and gaseous hydrogen (GH2) injector. The most notable validation effort was a comprehensive validation effort conducted by Tucker et al. [1], in which a number of different groups modeled a GO2/GH2 single element configuration by Pal et al [2]. The tools used for this validation comparison employed a range of algorithms, from both steady and unsteady Reynolds Averaged Navier‐Stokes (U/RANS) calculations, large‐eddy simulations (LES), detached eddy simulations (DES), and various combinations. A more recent effort by Thakur et al. [3] focused on using a state‐of‐the‐art CFD simulation tool, Loci/STREAM, on a two‐dimensional grid. Loci/STREAM was chosen because it has a unique, very efficient flamelet parameterization of combustion reactions that are too computationally expensive to simulate with conventional finite‐rate chemistry calculations. The current effort focuses on further advancement of validation efforts, again using the Loci/STREAM tool with the flamelet parameterization, but this time with a three‐dimensional grid. Comparisons to the Pal et al. heat flux data will be made for both RANS and Hybrid RANSLES/ Detached Eddy simulations (DES). Computation costs will be reported, along with comparison of accuracy and cost to much less expensive two‐dimensional RANS simulations of the same geometry.

Westra, Doug G.↗