Search NASA⌕ Search

SEARCH · Search NASA

Results for “Flux pinning”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Comparative study of flux pinning flux creep and critical currents between YBaCuO crystals with and without Y2BaCuO5 inclusions

In the Y-Ba-Cu-O system YBa2Cu3Ox phase is produced by the following peritectic reaction: Y2BaCuO5 + liquid yields 2YBa2Cu3Ox. Through the control of processing conditions and starting compositions it becomes possible to fabricate large crystals containing fine Y2BaCuO5(211) inclusions. Such crystals exhibit Jc values exceeding 10000 A/sq cm at 77 K and 1T. Recently, researchers developed a novel process which can control the volume fraction of 211 inclusions. Elimination of 211 inclusions is also possible. In this study, researchers prepared YBaCuO crystals with and without 211 inclusions using the novel process and compared flux pinning, flux creep and critical currents. Magnetic field dependence of Jc for YBaCuO crystals with and without 211 inclusions is shown. It is clear that fine 211 inclusions can contribute to flux pinning. It was also found that flux creep rate could be reduced by increasing flux pinning force. Critical current density estimates based on the conventional flux pinning theory were in good agreement with experimental results.

Murakami, Masato↗
NASA NTRS2018

Flux-Pinned Dynamics Model Parameterization and Sensitivity Study

Flux-pinned interfaces for spacecraft are an action-at-a-distance technology that can maintain a passively stable equilibrium between two spacecraft in close-proximity using the physics of magnetic flux pinning. Although flux pinning dynamics have been studied from a material-science perspective and at an interface level, there is a need to better understand the sensitivities and implications of system-level designs on the flux-pinned interface dynamics, especially in designs with multiple magnets and superconductors. These interfaces have highly nonlinear, coupled dynamics that are influenced by physical parameters including but not limited to strength of magnetic field sources, field-cooled position, and superconductor geometry. This paper addresses that gap by codifying parametric terms into an improved dynamics model, which can then be used to simulate the interaction of a multiple-superconductor-multiple-magnet interface. A standard starting point for modeling flux pinning dynamics is Kordyuk’s frozen image model, which defines a geometric mapping between magnetic field sources and their corresponding magnetic point source “images inside the volume of the superconductor.” The frozen image model successfully approximates the characteristics of flux pinning dynamics, but could provide more precise position and orientation predictions with the addition of various physical parameter refinements. The sensitivity of the general flux-pinned dynamics model is studied by varying the physical parameters and simulating the systems level dynamics. A predictive dynamics model is crucial to the maturation of this technology so it can be utilized in spacecraft systems, and this work represents a critical step in the development of that model.

Peck, Mason↗
NASA NTRS1991

Comparative study of flux pinning, creep and critical currents between YBaCuO crystals with and without Y2BaCuO5 inclusions

In the Y-Ba-Cu-O system, YBa2Cu3O(x) phase is produced by the following peritectic reaction: Y2BaCuO5 + liquid yields 2YBa2Cu3O(x). Through the control of processing conditions and starting compositions, it becomes possible to fabricate large crystals containing fine Y2BaCuO5(211) inclusions. Such crystals exhibit Jc values exceeding 10000 A/sq cm at 77 K and 1T. Recently, researchers developed a novel process which can control the volume fraction of 211 inclusions. Elimination of 211 inclusions is also possible. In this study, researchers prepared YBaCuO crystals with and without 211 inclusions using the novel process, and compared flux pinning, flux creep and critical currents. Magnetic field dependence of Jc for YBaCuO crystals with and with 211 inclusions is shown. It is clear that fine 211 inclusions can contribute to flux pinning. It was also found that flux creep rate could be reduced by increasing flux pinning force. Critical current density estimates based on the conventional flux pinning theory were in good agreement with experimental results.

Murakami, Masato↗
NASA NTRS1995

Flux pinning characteristics and irreversibility line in high temperature superconductors

The flux pinning properties in high temperature superconductors are strongly influenced by thermally activated flux motion. The scaling relation of the pinning force density and the irreversibility line in various high temperature superconductors are numerically analyzed in terms of the flux creep model. The effect of two factors, i.e., the flux pinning strength and the dimensionality of the material, on these properties are investigated. It is speculated that the irreversibility line in Bi-2212 superconductors is one order of magnitude smaller than that in Y-123, even if the flux pinning strength in Bi-2212 is improved up to the level of Y-123. It is concluded that these two factors are equally important in determination of the flux pinning characteristics at high temperatures.

Matsushita, T.↗
NASA NTRS2011

A Flux-Pinning Mechanism for Segment Assembly and Alignment

Currently, the most compelling astrophysics questions include how planets and the first stars formed and whether there are protostellar disks that contain large organic molecules. Although answering these questions requires space telescopes with apertures of at least 10 meters, such large primaries are challenging to construct by scaling up previous designs; the limited capacity of a launch vehicle bounds the maximum diameter of a monolithic primary, and beyond a certain size, deployable telescopes cannot fit in current launch vehicle fairings. One potential solution is connecting the primary mirror segments edgewise using flux-pinning mechanisms, which are analogous to non-contacting damped springs. In the baseline design, a flux-pinning mechanism consists of a magnet and a superconductor separated by a predetermined gap, with the damping adjusted by placing aluminum near the interface. Since flux pinning is possible only when the superconductor is cooled below a critical temperature, flux-pinning mechanisms are uniquely suited for cryogenic space telescopes. By placing these mechanisms along the edges of the mirror segments, a primary can be built up over time. Since flux pinning requires no mechanical deployments, the assembly process could be robotic or use some other non-contacting scheme. Advantages of this approach include scalability and passive stability.

Gersh-Range, Jessica A.↗
NASA NTRS1990

Magnetic properties of high-T(sub c) superconductors: Rigid levitation, flux pinning, thermal depinning, and fluctuation

The levitation of high-T(sub c) superconductors is quite conspicuous: Above magnets of low symmetry a disk of these ceramics floats motionless, without vibration or rotation; it has a continuous range of stable positions and orientations as if it were stuck in sand. Some specimens may even be suspended above or below the same magnet. This fascinating stability, inherent to no other type of levitation, is caused by the pinning of magnetic flux lines by inhomogeneities inside these extreme type-2 superconductors. The talk deals with pinning of magnetic flux in these materials, with flux flow, flux creep, thermally activated depinning, and the thermal fluctuation of the vortex positions in the flux line lattice (often called flux lattice melting). Also discussed are the fluctuations of the (nearly periodic) magnetic field inside these superconductors which are caused by random pinning sites and by the finite temperature. These fluctuations broaden the van-Hove singularities observed in the density of the magnetic field by nuclear magnetic resonance and by muon spin rotation.

Brandt, E. H.↗
NASA NTRS2019

Flux pinning concepts for on-orbit capture and orientation of an MSR orbiting sample container

Concepts for on-orbit capture and orientation of a Mars orbiting sample container (OS) using flux pinning were developed as candidate technologies for potential Mars Sample Return (MSR). The systems consist of a set of type-II superconductors field cooled below their critical temperature using a cryocooler, and operate on an orbiting sample container with a series of permanent magnets spaced around the exterior, along with an integrated layer of shielding to preserve the magnetic properties of the returned samples. Benefits of the approaches include passive, non-contact capture and orientation, as well as a reduction in the number of actuators relative to various mechanical methods.

Chiu, Chi Yeung↗
NASA NTRS1991

Rigid levitation, flux pinning, thermal depinning and fluctuation in high-Tc superconductors

Here, the author shows that the strong velocity-independent frictional force on a levitating superconductor and on any type-II superconductor moving in a homogeneous magnetic field is caused by pinning and depinning of the magnetic flux lines in its interior. Levitation may thus be used to investigate the pinning properties of a superconductor, and friction in a superconductor bearing may be minimized by choosing appropriate materials and geometries.

Brandt, E. H.↗
NASA NTRS2017

Magnetic Shield Design Modeling and Validation on SWOT Spacecraft Applied to Mars Flux Pinning Orbiting Sample Design

A modeling methodology was developed for use on the Surface Water and Ocean Topography (SWOT) mission for the computational modeling and design of a magnetic shield for a 63 A-sq m source. Shield options were modeled and tested across various design parameters and validated with measurement. Measurement results fell within 10% of simulation in most cases of concern with sources of error well understood. These methods results informed a subsequent modeling activity for a future Mars Sample Return (MSR) mission concept with stringent magnetic cleanliness requirements to retain geologic integrity of the samples. One option for capturing the sample from orbit requires rare earth magnets in close proximity to the Martian samples. Magnetic modeling with a finite-element method solver estimated the magnetic environment and established the need for shielding. Further modeling then determined the shielding necessary to meet magnetic requirements, followed by the design of a mass-optimized solution.

Gonzales, Edward↗
DOE OSTI2020

Superconductor with improved flux pinning at low temperatures

A REBCO superconductor tape that can achieve a lift factor greater than or equal to approximately 3.0 or 4.0 in an approximately 3 T magnetic field applied perpendicular to a REBCO tape at approximately 30 K. In an embodiment, the REBCO superconductor tape can include a critical current density less than or equal to approximately 4.2 MA/cm2 at 77 K in the absence of an external magnetic field. In another embodiment, the REBCO superconductor tape can include a critical current density greater than or equal to approximately 12 MA/cm2 at approximately 30 K in a magnetic field of approximately 3 T having an orientation parallel to a c-axis.

Selvamanickam, Venkat↗
DOE OSTI2022

Superconductor with improved flux pinning at low temperatures

A REBCO superconductor tape that can achieve a lift factor greater than or equal to approximately 3.0 or 4.0 in an approximately 3 T magnetic field applied perpendicular to a REBCO tape at approximately 30 K. In an embodiment, the REBCO superconductor tape can include a critical current density less than or equal to approximately 4.2 MA/cm2 at 77 K in the absence of an external magnetic field. In another embodiment, the REBCO superconductor tape can include a critical current density greater than or equal to approximately 12 MA/cm2 at approximately 30 K in a magnetic field of approximately 3 T having an orientation parallel to a c-axis.

Selvamanickam, Venkat↗