Search NASA⌕ Search

SEARCH · Search NASA

Results for “Formability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Utilizing Strain Rate Jump Testing to Predict Flow Formability of Al Alloys Sensitive to Portevin-Le Chatelier Instabilities

Predicting the flow formability of Al alloys is challenging due to the incremental deformation, complex loading path, and wide range of strain rates characteristic of the process. State-of-the-art research efforts have primarily focused on formability metrics derived from ambient temperature, constant strain rate uniaxial tensile testing. However, Al alloys in formable tempers tend to exhibit serrated Portevin-Le Chatelier (PLC) flow. The appearance of PLC instabilities implies a negative strain rate sensitivity, loss of tensile area reduction capacity, and decreased formability. Elevated temperature and interrupted strain rate tensile tests of relevant Al alloys were conducted to investigate the effects of rapid changes in strain rate (analogous to a forming increment by a passing roller) on common formability metrics. Emphasis was placed on the character/extent of PLC instabilities using digital image correlation strain measurements. The outcome of this work highlights the possibility of predicting flow formability using strain rate jump testing.

flow forming↗
NASA NTRS2011

Effects of Annealing Process on the Formability of Friction Stir Welded Al-Li Alloy 2195 Plates

Large rocket cryogenic tank domes have typically been fabricated using Al-Cu based alloys like Al-Cu alloy 2219. The use of aluminum-lithium based alloys for rocket fuel tank domes can reduce weight because aluminum-lithium alloys have lower density and higher strength than Al-Cu alloy 2219. However, Al-Li alloys have rarely been used to fabricate rocket fuel tank domes because of the inherent low formability characteristic that make them susceptible to cracking during the forming operations. The ability to form metal by stretch forming or spin forming without excessive thinning or necking depends on the strain hardening exponent "n". The stain hardening exponent is a measure of how rapidly a metal becomes stronger and harder. A high strain hardening exponent is beneficial to a material's ability to uniformly distribute the imposed strain. Marshall Space Flight Center has developed a novel annealing process that can achieve a work hardening exponent on the order of 0.27 to 0.29, which is approximately 50% higher than what is typically obtained for Al-Li alloys using the conventional method. The strain hardening exponent of the Al-Li alloy plates or blanks heat treated using the conventional method is typically on the order of 0.17 to 0.19. The effects of this novel annealing process on the formability of friction stir welded Al-Li alloy blanks are being studied at Marshall Space Flight Center. The formability ratings will be generated using the strain hardening exponent, strain rate sensitivity and forming range. The effects of forming temperature on the formability will also be studied. The objective of this work is to study the deformation behavior of the friction stir welded Al-Li alloy 2195 blank and determine the formability enhancement by the new annealing process.

Chen, Po-Shou↗
NASA NTRSDate not supplied

Spin Formability of High-Strength Aluminum Alloys for Aerospace Applications

Near-net-shape fabrication of launch vehicle tanks and aircraft fuselages is critical for meeting the growing demand for unitized structures in the aerospace industry. Cryogenic tank manufacturing relies on multi-piece construction requiring hundreds of meters of welds that increase both structural weight and inspection time. Currently, fuselages have an immense part count requiring tens of thousands of rivets and long assembly time. NASA is pursuing spin and flow forming technology for manufacturing such structures with minimal assembly. These processes enable domes and stiffened barrels to be fabricated using single-piece construction, offering significant manufacturing rate benefits over conventional methods. However, Al alloys with sufficient formability, such as Al 6061, tend to have insufficient strength for aerospace structural applications. In contrast, alloys with higher strength, such as Al 2139 and Al 2050, exhibit insufficient formability during ambient temperature forming. This study investigates the spin formability of competitive 5xxx and 2xxx series Al alloys, identifies defects impeding formability, and sheds light on future processing routes for successful forming.

Aluminum↗
NASA NTRSDate not supplied

Spin Formability of High-Strength Aluminum Alloys for Aerospace Applications

Near-net-shape fabrication of launch vehicle tanks and aircraft fuselages is proposed to increase manufacturing rates of aerospace structures. Currently, cryogenic tank manufacturing relies on multi-piece construction requiring hundreds of meters of welds that increase both structural weight and inspection time. Metallic aircraft fuselages involve installation of tens of thousands of rivets resulting in long assembly times. NASA is pursuing spin and flow forming technologies for manufacturing such structures with minimal assembly. These processes enable domes and stiffened barrels to be fabricated using single-piece construction, offering significant manufacturing rate benefits over conventional methods. However, aluminum alloys with sufficient formability, such as Al 6061, tend to have insufficient strength for aerospace structural applications. In contrast, alloys with higher strength, such as Al 2139 and Al 2050, exhibit insufficient formability during ambient temperature forming. This study investigates the spin formability of competitive 5xxx- and 2xxx-series Al alloys, identifies defects impeding formability, and sheds light on future processing routes for successful forming.

Aluminum↗
DOE OSTI2021

Characterization of the Formability of High-Purity Polycrystalline Niobium Sheets for Superconducting Radiofrequency Applications

The forming limit diagram (FLD) of high-purity niobium sheets used for the manufacturing of superconducting radiofrequency (SRF) cavities is presented. The Marciniak (in-plane) test was used with niobium blanks with a thickness of 1 mm and blank carriers of annealed oxygen-free electronic (OFE) copper. A high formability was measured, with an approximate true major strain at necking for plane strain of 0.44. The high formability of high-purity niobium is likely caused by its high strain rate sensitivity of 0.112. Plastic strain anisotropies (r-values) of 1.66, 1.00, and 2.30 were measured in the 0 deg, 45 deg, and 90 deg directions. However, stress–strain curves at a nominal strain rate of ~10 –3 s –1 showed similar mechanical properties in the three directions. Theoretical calculations of the forming limit curves (FLCs) were conducted using an analytical two-zone model. The obtained results indicate that the anisotropy and strain rate sensitivity of niobium affect its formability. The model was used to investigate the influence of strain rate on strains at necking. The obtained results suggest that the use of high-speed sheet forming should further increase the formability of niobium.

mechanical behavior↗
DOE OSTI2022

Local Thermomechanical Processing for Improving Formability of High Strength Aluminum Sheets

Limited room temperature formability hinders the wide-spread use of high strength aluminum alloys in structural body-in-white parts. Stamping or extrusion at warm temperatures or from softer tempers are the current solutions. In this work, our approach is to start with age-hardened sheets from 7xxx and 6xxx family of alloys and improve their formability using local thermomechanical processing only in the regions demanding highest ductility in the forming processes. We achieved local formability improvements with friction stir processing and introduce another process named roller-bending as a concept and showed its feasibility through finite element simulations. Initial results from FSP indicated significant deformation in the processed zones with minimal sheet distortion. FSP also resulted in dynamically recrystallized, fine grained (d < 5 µm) microstructures in the processed regions with textures significantly different from the base material. This resulted in formability improvements of > 30% in 7085-T76 and > 50% in 6111-T6 alloys as measured by minimum bend radius (r/t) ratios established with V-bending tests performed at 90° and 180° bend angles. Based on the encouraging initial results, we envision applicability of these processes in both pre- and post-stamping stages through integration of the process tools as end-effectors to robotic arms.

Nasim, Wahaz↗
NASA NTRS2023

Assessing Flow Formability of Aerospace Aluminum Alloys via DIC Tensile Testing

Over the past decade, NASA Langley Research Center (LaRC) has championed integrally stiffened cylinder (ISC) technology for single-piece, cryogenic tank barrels on launch vehicles. The current investigation aims to extend the hybrid spin/shear/flow forming process to aircraft fuselage structures, a damage tolerance critical application. The WF Maschinenbau VUD-600® vertical spin/flow forming facility recently established at LaRC represents a reasonable sub-scale facsimile of the ISC deformation process for research and development (R&D) purposes. The objective of this study is to explore whether tensile testing with digital image correlation (DIC) is an effective way to rank the formability of candidate aerospace Al alloys and expedite empirical forming trials. Specific tensile data, such as reduction of area, strain hardening exponent, and modulus of resilience, are used as formability metrics for a variety of alloy/temper/product form combinations. Results from high-strength aluminum alloys AA 2139, AA 2050, AA 2043 and AA 2219 are compared with the medium-strength, highly formable AA 6061 benchmark. Rolled, forged and cast preform materials in both the -O temper (fully annealed) and -T4 temper (solution-treated, quenched, and naturally aged) conditions are evaluated. AA 2139 plate in the -T4 temper emerges as the top-ranked material, based on the criteria selected. Starting with preforms in the -T4 temper will result in flow-formed material exhibiting mechanical properties closer to aircraft fuselage requirements. The optimum balance between strength and damage tolerance may also be achieved via post-forming procedures that avoid quenching and stretching.

Aluminum alloys↗
DOE OSTI2026

High-throughput validation of phase formability and simulation accuracy of Cantor alloys

High-throughput methods enable accelerated discovery of novel materials in complex systems such as high-entropy alloys, which exhibit intricate phase stability across vast compositional spaces. Computational approaches, including Density Functional Theory (DFT) and calculation of phase diagrams (CALPHAD), facilitate screening of phase formability as a function of composition and temperature. However, the integration of computational predictions with experimental validation remains challenging in high-throughput studies. In this work, we introduce a quantitative confidence metric to assess the agreement between predictions and experimental observations, providing a quantitative measure of the confidence of machine learning models trained on either DFT or CALPHAD input in accounting for experimental evidence. The experimental dataset was generated via high-throughput in-situ synchrotron X-ray diffraction on compositionally varied FeNiMnCr alloy libraries, heated from room temperature to ~1000 °C. Agreement between the observed and predicted phases was evaluated using either temperature-independent phase classification or a model that incorporates a temperature-dependent probability of phase formation. This integrated approach demonstrates where strong overall agreement between computation and experiment exists, while also identifying key discrepancies, particularly in FCC/BCC predictions at Mn-rich regions to inform future model refinement.

36 - MATERIALS SCIENCE↗
NASA NTRS1991

Superplastic formability of Al-Cu-Li alloy Weldalite (TM) 049

Extensive research during the past decade shows that several aluminum lithium alloys can be processed to attain a microstructure that enables superplasticity. The high tensile stress of Al-Cu-Li alloy Weldalite (TM) 049 in the T4 and T6 tempers offers tremendous potential for attaining exceptional post-SPF (superplastic formability) properties. The used SPF material is Weldalite, which was shown to induce SPF behavior in other Al-Cu-Li alloys. The superplastic behavior and resulting post-SPF mechanical properties of this alloy, which was designed to be the next major structural alloy for space applications, were evaluated. The results indicate that Weldalite alloy does indeed exhibit excellent superplasticity over a wide range of temperatures and strain rates and excellent post-SPF tensile strength at various potential service temperatures.

Ma, Bao-Tong↗
NASA NTRS1989

Cryogenic mechanical properties of low density superplastically formable Al-Li alloys

The aerospace industry is considering the use of low density, superplastically formable (SPF) materials, such as Al-Li alloys in cryogenic tankage. SPF modifications of alloys 8090, 2090, and 2090+In were tested for strength and Kahn tear toughness. The results were compared to those of similar tests of 2219-T87, an alloy currently used in cryogenic tankage, and 2090-T81, a recently studied Al-Li alloy with exceptional cryogenic properties (1-9). With decreasing temperature, all materials showed an increase in strength, while most materials showed an increase in elongation and decrease in Kahn toughness. The indium addition to 2090 increased alloy strength, but did not improve the strength-toughness combination. The fracture mode was predominantly intergranular along small, recrystallized grains, with some transgranular fracture, some ductile rupture, and some delamination on large, unrecrystallized grains.

Verzasconi, S. L.↗
NASA NTRS2016

Method of Heat Treating Aluminum-Lithium Alloy to Improve Formability

A method is provided for heat treating aluminum-lithium alloys to improve their formability. The alloy is heated to a first temperature, maintained at the first temperature for a first time period, heated at the conclusion of the first time period to a second temperature, maintained at the second temperature for a second time period, actively cooled at the conclusion of the second time period to a third temperature, maintained at the third temperature for a third time period, and then passively cooled at the conclusion of the third time period to room temperature.

Chen, Po-Shou↗
DOE OSTI2023

Prediction of the influence of strain magnitude and strain path on the resulting microstructure and post-forming mechanical behavior of RA containing high formability steels

In third generation advanced high strength steels (AHSS) there is considerable potential to alter the transformation characteristics through variation of process parameters and through changes in chemical composition. This proposal aims to utilize this known phenomenon to develop microstructure-based transformation models to predict austenite stability as a function of chemical composition, strain level, deformation mode. The ultimate intent is to predict microstructure and performance during room temperature forming to produce automotive structural components with superior strength and failure resistance.

36 MATERIALS SCIENCE↗
NASA NTRS1987

The effect of solidification rate on the formability of nickel aluminide containing iron and boron

Following reports that rapid solidification improves the ductility of some nickel aluminides, an investigation has been conducted of the possibility of additional improvement in a nickel aluminide containing both Fe and B. Free fall-solidified and free fall/splat-quenched samples similar to those producible under microgravity conditions in space were prepared, and their microstructure was characterized. Attention is given to the preliminary results of tests quantitatively measuring mechanical properties.

Carro, G.↗
NASA NTRS1988

Enhancement of superplastic formability in a high strength aluminum alloy

A 7475 aluminum alloy was developed for superplastic forming (SPF). By lowering the Fe and Si contents in this alloy significantly below their normal levels and optimizing the thermomechanical processing to produce sheet, over 2000 percent thickness strain to failure was obtained. The microstructure, elevated-temperature uniaxial and biaxial tension, and cavitation behavior of the alloy were determined. In addition, a constitutive model was used to form a generic structural shape from which mechanical test specimens were removed and post-SPF characteristics were evaluated. The constitutive model included both material strain hardening and strain rate hardening effects, and was verified by accurately predicting forming cycles which resulted in successful component forming. Stress-life fatigue, stress rupture, and room and elevated temperature tensile tests were conducted on the formed material.

Agrawal, S. P.↗
NASA NTRS1989

Method of forming low cost, formable High T(subc) superconducting wire

A ceramic superconductivity part, such as a wire, is produced through the partial oxidation of a specially formulated copper alloy in a core. The alloys contains low level of quantities of rare earth and alkaline earth dopant elements. Upon oxidation at high temperatures, and superconducting oxide phases are formed as a thin film.

Smialek, James L.↗
NASA NTRS1991

Low cost, formable, high T(sub c) superconducting wire

A ceramic superconductivity part such as a wire is produced through the partial oxidation of a specially formulated copper alloy in the core. The alloys contain low level quantities of rare earth and alkaline earth dopant elements. Upon oxidation at high temperature, superconducting oxide phases are formed as a thin film.

Smialek, James L.↗
NASA NTRS1992

Glass formability of high T(sub c) Bi-Sr-Ca-Cu-O superconductors

A number of compositions of ceramic oxide high T(sub c) superconductors were evaluated for their glass formation ability by means of rapid thermal analysis during quenching, optical and electron microscopy of the quenched samples, and with subsequent DSC measurements. Correlations between experimental measurements and the methodical composition changes identified the formulations of superconductors that can easily form glass. The superconducting material was first formed as a glass, then with subsequent devitrification it was formed into bulk crystalline superconductor by a series of processing methods.

Kaukler, William F.↗