Search NASA⌕ Search

SEARCH · Search NASA

Results for “Formats”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Physical conditions for UO formation in laser-produced uranium plumes

Laser-induced plasma spectroscopy is a powerful method for elemental detection and analysis, however the broadening and merging of densely packed spectral lines can make it especially challenging for studying high-Z elements such as uranium and other actinides. In order to understand the processes occurring in laser-induced plasma, it is necessary to evaluate the variation of its thermodynamic parameters. We performed spatiotemporal diagnostics of uranium species in plasma plumes produced by nanosecond near-infrared laser pulses in low- pressure environment. Spatially- and temporally-resolved emission spectroscopy experiments are supported by modeling of uranium emission and its persistence in the plume. Saha-Eggert equation as well as Boltzmann diagrams generated from numerous U I transitions are used to infer temperature. We report the rst measurements of uranium Stark broadening parameters for U I 499.01 nm and U II 500.82 nm transitions. The Stark widths of selected U transitions were measured by comparing their linewidths with the broadening of O I 777.19 nm line. Electron density was found to be on the order of 1016 cm??3, while the temperature was found to be in the range of 3000{8000 K. In addition to enhancing the fundamental understanding of high-Z plasmas under reduced-pressure environments, the knowledge of Stark broadening parameters could improve modeling capabilities and analytical performance of techniques that rely on emission plasma spectroscopy.

(140.3440) Laser-induced breakdown, (280.4788) Opt↗
DOE OSTI2021

Mechanistic Investigation of Dimethylmercury Formation Mediated by a Sulfide Mineral Surface

Mercury (Hg) pollution is a global environmental problem, but many key transformations among 29 various Hg species are not well understood. Although anaerobic microorganisms are the primary 30 producers of monomethylmercury (MMeHg), the abiotic formation of dimethylmercury (DMeHg) 31 from MMeHg have been suggested to account for a large portion of DMeHg in the ocean. It has 32 been shown that abiotic formation of DMeHg from MMeHg can be facilitated by reduced sulfur 33 groups on mineral surfaces. However, a detailed mechanistic understanding of this reaction is 34 lacking. Here we perform density functional theory (DFT) calculations to explore mechanisms of 35 DMeHg formation on the 110 surface of a CdS(s) (hawleyite) nanoparticle. We show that 36 coordination of MMeHg substituents to adjacent reduced sulfur groups protruding from the surface 37 facilitate DMeHg formation and that the reaction proceeds through direct transmethylation from 38 one MMeHg substituent to another. Solvation effects were found to play an important role in the 39 surface reconstruction of the nanoparticle and in decreasing the energetic barrier for DMeHg 40 formation. We also investigate DMeHg formation from MMeHg mediated by organic dithiols and 41 compare the results to those mediated by the mineral surface. In contrast to the surface reaction, 42 the calculations suggest that dithiol-mediated formation of DMeHg instead proceeds through a 43 mechanism in which Hg–Hg interactions activate a methyl group from one MMeHg substituent 44 for intramolecular transfer to the adjacent MMeHg substituent. These findings refine previously 45 proposed mechanisms of abiotic DMeHg formation and fill gaps in our understanding of global 46 Hg cycling in the environment.

Lian, Peng↗
DOE OSTI2024

ENDFtk: A robust tool for reading and writing ENDF-formatted nuclear data

ENDFtk is a recently developed C++ and Python interface to interact with ENDF-6 formatted nuclear data files. It provides a robust and complete interface, allowing the reading and writing of all formats currently part of the ENDF-6 formats manual, as well as some non-ENDF formats used by the NJOY processing code. It provides an interface that mimics the names in the ENDF-6 formats manual as well as an equivalent interface using human-readable attribute names. It is robust and powerful enogh for nuclear data experts to develop complex applications, while also simple enough to be used non-experts to retrieve and manipulate evaluated nuclear data. ENDFtk offers the ability to easily interrogate and manipulate data either in large-scale code projects or in simple Python scripts. Here, in this paper, a brief overview of the interface is given, as well as more substantial examples demonstrating plotting simple data, interacting with more complex data, and writing new data to files. ENDFtk is open source and available for download via GitHub (https://github.com/njoy/ENDFtk).

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2018

Benzimidazoles as Metal-Free and Recyclable Hydrides for CO 2 Reduction to Formate

We report a novel metal-free chemical reduction of CO 2 by a recyclable benzimidazole-based organo-hydride, whose choice was guided by quantum chemical calculations. Notably, benzimidazole-based hydride donors rival the hydride-donating abilities of noble-metal-based hydrides such as [Ru(tpy)(bpy)H] + and [Pt(depe) 2 H] + . Chemical CO 2 reduction to the formate anion (HCOO–) was carried out in the absence of biological enzymes, a sacrificial Lewis acid, or a base to activate the substrate or reductant. 13 CO 2 experiments confirmed the formation of H 13 COO – by CO 2 reduction with the formate product characterized by 1H NMR and 13C NMR spectroscopy and ESI-MS. The highest formate yield of 66% was obtained in the presence of potassium tetrafluoroborate under mild conditions. The likely role of exogenous salt additives in this reaction is to stabilize and shift the equilibrium toward the ionic products. After CO 2 reduction, the benzimidazole-based hydride donor was quantitatively oxidized to its aromatic benzimidazolium cation, establishing its recyclability. In addition, we electrochemically reduced the benzimidazolium cation to its organo-hydride form in quantitative yield, demonstrating its potential for electrocatalytic CO 2 reduction. These results serve as a proof of concept for the electrocatalytic reduction of CO 2 by sustainable, recyclable, and metal-free organo-hydrides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Fast growth and high-titer bioproduction from renewable formate via metal-dependent formate dehydrogenase in Escherichia coli

Microbial bioproduction using one-carbon (C1) feedstocks has the potential to decarbonize the manufacturing of materials, fuels, and chemicals. Formate is a promising C1 feedstock, and the realization of industrial, formatotrophic platform organisms is a key goal for C1-based bioproduction. So far, a major limitation for synthetic formatotrophy has been slow energy supply due to slow formate dehydrogenase activity. Here, we implement a fast, metal-dependent formate dehydrogenase complex in a synthetic formatotrophic Escherichia coli utilizing the reductive glycine pathway. After a short-term evolution, we demonstrate formatotrophic growth of E. coli with a doubling time of less than 4.5 h, comparable to the fastest natural formatotrophs. To further explore the potential of a formate-based bioeconomy, this strain is engineered to produce mevalonate, as well as the terpenoid and aviation fuel precursor isoprenol, using formate we generate directly from the electrochemical reduction of CO2. This work demonstrates an improvement in bioproduct titer from formate, achieving the production of 3.8 g/L of mevalonate. Additionally, the abundant and recalcitrant polymer lignin is chemically decomposed into a formate-rich mixture of small organic acids and subsequently bioconverted into mevalonate. Overall, the described fast-growing, formatotrophic bioproduction strain demonstrates that a sustainable formate bioeconomy is within reach.

Cowan, Aidan E↗
DOE OSTI2021

A reporting format for field measurements of soil respiration

Field observations of the soil-to-atmosphere CO2 flux–soil respiration, RS–are a prime example of ‘long tail’ data that historically have had neither centralized databases nor an agreed-upon reporting format. This has hindered scientific transparency, analytical reproducibility, and novel syntheses with respect to this globally-important component of the carbon cycle. Here we propose a new data and metadata reporting format for RS data, based on engagement with a wide range of researchers in the field as well as expert advisory panels. Our goal was a reporting format that would be relevant and useful for synthesis activities, and optimizing data discoverability and usability while not placing an undue burden on data contributors. We describe previous RS data collection efforts, lessons learned from related databases and data-oriented networks (e.g. FLUXNET) in earth and ecological sciences, and the process of community consultation. The proposed reporting format focuses on chamber-level data and metadata, specifying measurement conditions and, for a given measurement period defined by beginning and ending timestamps, a mean RS flux (or CO2 concentration) and associated ancillary measurements. Fundamentally, this format aims to enable findable, accessible, interoperable, and reusable data, while providing ‘future-proofing’ capabilities to support reanalyses using as yet unknown algorithms or approaches. Finally, this proposed RS reporting format is available online, and is intended to be a dynamic document, subject to further community feedback and/or change in the future.

Bond-Lamberty, Benjamin↗
DOE OSTI2020

Development of an autothermal formate-based hydrogen generator: From optimization of formate dehydrogenation conditions to thermal integration with Fuel Cells

Formate received significant attention for storing H2 in chemical bonds using the concept of H2 carriers. In this report, hydrogen generation from formate was optimized systematically by varying reaction variables. Initial mass activity with a turnover frequency of 3200 molH2 molPd–1 h–1 and 92% H2 yield were obtained in sodium formate (7 M 2.0 mL) dehydrogenation over Pd(3 wt %)/C at 80 °C. Influence of formate cations (Na, K, and NH4) on dehydrogenation was also elucidated, presenting that the fastest initial reaction kinetics was achieved with ammonium formate, whereas the highest H2 yield was obtained with potassium formate (PF) in multiple catalyst recycle tests. Finally, an on-site power generation system was integrated, where a proton exchange membrane fuel cell (PEMFC) was operated in conjunction with H2 produced from the custom developed semibatch dehydrogenation reactors. The system operation was demonstrated with continuous feeding of PF to generate H2 and power on demand without an external heat source by utilizing waste heat produced from the PEMFC in a highly efficient manner.

formate dehydrogenation, optimization of reaction ↗
DOE OSTI2020

Efficient Nighttime Biogenic SOA Formation in a Polluted Residual Layer

Abstract Organic nitrates formed from nighttime reaction between anthropogenic nitrate radicals (NO3) and biogenic volatile organic compounds (BVOCs) are potentially an important but highly uncertain source of secondary organic aerosol (SOA). Here we report on the enhanced nighttime biogenic SOA formation observed in a polluted residual layer over Sacramento, California, the morning of 15 June 2010 during the Carbonaceous Aerosols and Radiative Effects Study (CARES). Trajectory analysis showed that the residual layer air, containing trace amounts of isoprene and monoterpenes left over after nighttime oxidation, was influenced by the San Francisco Bay Area emissions the previous evening. The residual layer aerosol was also enriched in nitrate, with about 64% of it estimated to be in the form of organic nitrates. The nitrate:organic mass ratio of the SOA was about 0.47±0.044, which corresponds to the range typically found in isoprene mononitrates. Assuming the SOA was composed of organic mononitrates, its nominal molecular weight was estimated at 186±11 g mol-1, consistent with the highly functionalized isoprene hydroxynitrates that have been observed in the particle phase in the southeast United States. Overall, our findings show that the efficiency of nighttime biogenic SOA formation, expressed as the change in organic aerosol mass relative to carbon monoxide (?OA/?CO), was about 100 µg m-3 ppmv, which falls in the range 77-157 µg m-3 ppmv previously estimated for enhanced daytime SOA formation from mixed anthropogenic and biogenic emissions during CARES.

Zaveri, Rahul A.↗
DOE OSTI2019

Plume dynamics and gas-phase molecular formation in transient laser-produced uranium plasmas

The dynamics of expansion, thermodynamics, and chemical reactions in laser-produced plasmas is of general interest for all laser ablation applications. This study investigates the complex morphology and behavior of reactive species in nanosecond laser-produced uranium plasmas. Comparing plasma morphology in various inert and reactive ambient gases provides information about the role of gas-phase chemistry in plume hydrodynamics. Background gases including nitrogen and argon foster collisional interactions leading to more significant plume confinement and the increase in persistence of uranium species. On the other hand, environments containing reactive gases such as oxygen promote chemical reactions between the plasma and ambient species. By comparing the expansion dynamics of uranium plumes in nitrogen, air, and argon, we discover that chemical reactions modify the hydrodynamics of the plume at later times of its evolution in the air background. Furthermore, we observe that varying the concentration of oxygen in the fill gas promotes different reaction pathways that lead to the formation of uranium oxides. The reaction pathways from atoms to diatomic to polyatomic molecules strongly vary with ambient oxygen concentration. Lower oxygen concentrations enhance the formation of uranium monoxide from atomic uranium, whereas higher oxygen concentrations tend to depopulate both atomic uranium and uranium monoxide concentrations through the formation of more complex uranium oxides.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Band Energy Dependence of Defect Formation in the Topological Semimetal Cd3As2

Cadmium Arsenide (Cd3As2) is a prototypical Dirac semimetal that manifests topological properties in a 3D bulk material. In defect-free Cd3As2, the Fermi level lies at a minimum in the density of states at the Dirac point, but experimentally it forms with excess electron carriers and an elevated EF, thereby masking the topological features. To computationally study the self-doping of Cd3As2, we combine density functional theory (DFT) calculations for defect formation energies with quasi-particle self-consistent GW (QSGW) electronic structure calculations. We demonstrate an innate dependence of the point defect formation energies on carrier concentrations and use the QSGW calculated density of states to extrapolate formation energies to arbitrary electron concentrations. This approach allows the quantitative modeling of thermodynamic defect equilibria in topological semimetals and is used to predict how Cd3As2 growth conditions affect the position of EF relative to the Dirac point.

CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSICS↗
DOE OSTI2023

A Novel Resilience-Oriented Cellular Grid Formation Approach for Distribution Systems with Behind-the-Meter Distributed Energy Resources

This paper presents a resilience-oriented cellular grid formation approach to achieve scalable and reconfigurable community microgrid operations for distribution systems with behind-the-meter distributed energy resources. A set of interconnected solar photovoltaics, energy storage systems, and load is termed as a cell, implying a subset of the grid that can operate independently using its own resources. Cells are identified such that each cell inherently has sufficient energy resources to black start and can provide a certain level of backup power for its load under the loss of utility power supply. The proposed cell formation approach builds on a unique self-organizing map-based method (SomRes) to quantify a system's resilience. Using SomRes and a non-dominated sorting-based genetic algorithm (NSGA-II), a fast and efficient cell formation algorithm is developed to identify cells in a distribution system that are resilient against extreme events. The efficacy of the proposed approach is demonstrated on a numerical model of a real distribution feeder in Colorado, United States.

distributed energy resource↗
DOE OSTI2024

Synthesis and structural characterization of 2,2’-bipyridine zinc formate: Analysis of formate bonding and hydrosilylation of CO 2 and carbonyl compounds

The zinc formate compound (bipy)Zn(O 2 CH) 2 is obtained via the reaction of Zn(O 2 CH) 2 with 2,2’-bipyridine (bipy). In addition, (bipy)Zn(O 2 CH) 2 may be formed from zinc hydride via addition of bipy followed by addition of (i) HCO 2 H and (ii) CO 2 . The molecular structure of (bipy)Zn(O 2 CH) 2 has been determined by X-ray diffraction, thereby demonstrating that it exists as a monomeric species with a distorted tetrahedral zinc center and monodentate formate ligands. Analysis of the bonding within the formate ligand indicates that the zinc–formate moiety is not best represented by a Zn–O–C(=O)H resonance structure, but instead possesses a significant ionic component that reduces the C=O bond order and increases the C–O bond order. The formate compound (bipy)Zn(O 2 CH) 2 participates in hydrosilylation transformations involving CO 2 and carbonyl compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Star Formation Histories from Spectral Energy Distributions and Color–magnitude Diagrams Agree: Evidence for Synchronized Star Formation in Local Volume Dwarf Galaxies over the Past 3 Gyr

Star formation histories (SFHs) reveal physical processes that influence how galaxies form their stellar mass. We compare the SFHs of a sample of 36 nearby (D ≲ 4 Mpc) dwarf galaxies from the ACS Nearby Galaxy Survey Treasury (ANGST), inferred from the color–magnitude diagrams (CMDs) of individually resolved stars in these galaxies, with those reconstructed by broadband spectral energy distribution (SED) fitting using the dense basis SED-fitting code. When comparing individual SFHs, we introduce metrics for evaluating SFH reconstruction techniques. For both the SED and CMD methods, the median normalized SFH of galaxies in the sample shows a period of quiescence at lookback times of 3–6 Gyr followed by rejuvenated star formation over the past 3 Gyr that remains active until the present day. To determine if these represent special epochs of star formation in the D <4 Mpc portion of the Local Volume, we break this ANGST dwarf galaxy sample into subsets based on specific star formation rate and spatial location. Modulo offsets between the methods of about 1 Gyr, all subsets show significant decreases and increases in their median normalized SFHs at the same epochs, and the majority of the individual galaxy SFHs are consistent with these trends. These results motivate further study of potential synchronized star formation quiescence and rejuvenation in the Local Volume as well as development of a hybrid method of SFH reconstruction that combines CMDs and SEDs, which have complementary systematics.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

High-speed synchrotron X-ray imaging of directed energy deposition of titanium: effects of processing parameters on the formation of entrapped-gas pores

Laser based directed energy deposition (DED) is a competitive method for repairing and remanufacturing metallic parts used in numerous industries including aerospace and biomedical. However, the numerous dynamic phenomena associated with the DED process often result in defects such as entrapped-gas pores, lack of fusion, and undesirable anisotropic properties. The entrapped-gas pore, being one of the most common issues, not only influences melt-pool dynamics but also reduces the fabrication quality and mechanical properties of parts fabricated by the DED process. To reduce and further understand this issue, the real-time observation of the pore formation process needs to be studied first. To directly observe the phenomena in the melt pool, high-speed techniques are needed because rapid solidification leads to rapid pore formation and movement. In-situ high-speed X-ray has been proven to be an effective method in investigating the melt pool dynamics and pore formation mechanisms in the laser powder bed fusion process, in which the fabrication process is quite different from that in DED. Here, the high-speed X-ray method is extended to study the formation of entrapped-gas pores. The real-time formation and quantitative analysis of pores under each set of processing parameters (particle velocity, laser power, and spot welding dwelling time of stationary laser) in the DED process are investigated. We found that the DED with a higher particle velocity (3.19 m/s) produced a smaller average pore size of 27.8 µm and a lower pore area fraction of 0.52%. The DED under lower laser power (156 W) generated a smaller average pore size of 20.3 µm and a lower pore area fraction of 1.94%. The shorter dwelling time (10 ms) benefited the decrease of both average pore size and pore area fraction.

Defect↗
DOE OSTI2020

Formation energy puzzle in intermetallic alloys: Random phase approximation fails to predict accurate formation energies

We performed density functional calculations to estimate the formation energies of intermetallic alloys. We used two semilocal approximations, the generalized gradient approximation (GGA) by Perdew-Burke- Ernzerhof (PBE) and the strongly constrained and appropriately normed (SCAN) meta-GGA. In addition, we utilized two nonlocal DFT functionals, the hybrid HSE06, and the state-of-the-art random phase approximation (RPA). The nonlocal functionals such as HSE06 and RPA yield accurate formation energies of binary alloys with completely-filled d-band metals, where semilocal functionals underperform. The accuracy at the nonlocal functionals is greatly reduced when a partially-filled d-band metal is present in an alloy, while PBE-GGA outperforms in these cases. We show that the accurate prediction of formation energies by any DFT method depends on its ability to predict the accurate electronic properties, e.g., valence d-band contribution to the density of states (DOS). The SCAN meta-GGA often corrects the PBE-DOS, however, it does not provide accurate formation energies compared to PBE. This is assumed to be due to the lack of proper error cancellation that should be expected due to the similar bulk nature of both alloys and their constituents, which may improve with the modification of meta-GGA ingredients. RPA yields too negative formation energies of alloys with partially-filled d-band metals. RPA results can be corrected by restoring the exchange-correlation kernel, thereby improving the short-range electron-electron correlation in metallic densities.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Robust palladium hydride catalyst for electrocatalytic formate formation with high CO tolerance

Palladium is unique in the electrocatalytic reduction of CO 2 to formate because of its low or even near-equilibrium onset potential. However, the inevitably produced CO molecules poison and deactivate the catalyst surface, resulting in an insufficient operating lifetime (<30 min) for conventional and optimized Pd catalysts. In this work, we present a hydrogen-rich Palladium hydride catalyst (PdH0.5/C) derived from a one-step solvothermal synthesis. This catalyst showed a 93.1 % faradaic efficiency towards formate at – 0.4 V (vs RHE). The working lifetime reached a record of 4 h, which was ~15 times longer than a commercial Pd catalyst and outperformed all previous Pd-based electrocatalysts for CO 2 -HCOO – conversion. The high CO tolerance was attributed to the selectivity improvement induced by lattice hydrogen and the weak CO adsorption strength on diverse active sites (i.e. kink, step, and terrace). Isotopic analysis revealed a direct participation of the lattice hydrogen in the protonation of CO 2 molecules in formate formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗