Search NASA⌕ Search

SEARCH · Search NASA

Results for “Fuel injector”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Ducted Fuel Injection vs. Conventional Diesel Combustion: Extending the Load Range in an Optical Engine with a Four-Orifice Fuel Injector

Ducted fuel injection (DFI) is a technique to attenuate soot formation in compression ignition engines relative to conventional diesel combustion (CDC). The concept is to inject fuel through a small tube inside the combustion chamber to reduce equivalence ratios in the autoignition zone relative to CDC. DFI has been studied at loads as high as 8.5 bar gross indicated mean effective pressure (IMEP g ) and as low as 2.5 bar IMEP g using a four-orifice fuel injector. Across previous studies, DFI has been shown to attenuate soot emissions, increase NO x emissions (at constant charge dilution), and slightly decrease fuel conversion efficiencies for most tested points. This study expands on the previous work by testing 1.1 bar IMEPg (low-load/idle) conditions and 10 bar IMEPg (higher-load) conditions with the same four-orifice fuel injector, as well as examining potential causes of the degradations in NO x emissions and fuel conversion efficiencies. DFI and CDC are directly compared at each operating point in the study. At the low-load condition, the intake charge dilution was swept to elucidate the soot and NO x performance of DFI. The low-load range is important because it is the target of impending, more-stringent emissions regulations, and DFI is shown to be a potentially effective approach for helping to meet these regulations. The results also indicate that DFI likely has slightly decreased fuel conversion efficiencies relative to CDC. We find that the increase in NO x emissions with DFI is likely due to longer charge gas residence times at higher temperatures, which arise from shorter combustion durations and advanced combustion phasing relative to CDC.

42 ENGINEERING↗

Internal baffling for fuel injector

A fuel injector includes a fuel delivery tube; a plurality of pre-mixing tubes, each pre-mixing tube comprising at least one fuel injection hole; an upstream tube support plate that supports upstream ends of the plurality of pre-mixing tubes; a downstream tube support plate that supports downstream ends of the plurality of pre-mixing tubes; an outer wall connecting the upstream tube support plate and the downstream tube support plate and defining a plenum therewith; and a baffle provided in the plenum. The baffle includes a radial portion. A fuel delivered in the upstream direction by the fuel delivery tube is directed radially outwardly in the plenum between the radial portion of the baffle and the downstream tube support plate, then in the downstream direction around an outer edge portion of the radial portion, and then radially inwardly between the radial portion and the upstream tube support plate.

42 ENGINEERING↗

Ducted Fuel Injection versus Conventional Diesel Combustion: An Operating-Parameter Sensitivity Study Conducted in an Optical Engine with a Four-Orifice Fuel Injector

Ducted fuel injection (DFI) has been shown to attenuate engine-out soot emissions from diesel engines. The concept is to inject fuel through a small tube within the combustion chamber to enable lower equivalence ratios at the autoignition zone, relative to conventional diesel combustion. Previous experiments have demonstrated that DFI enables significant soot attenuation relative to conventional diesel combustion for a small set of operating conditions at relatively low engine loads. This is the first study to compare DFI to conventional diesel combustion over a wide range of operating conditions and at higher loads (up to 8.5 bar gross indicated mean effective pressure) with a four-orifice fuel injector. This study compares DFI to conventional diesel combustion through sweeps of intakeoxygen mole fraction (XO 2 ), injection duration, intake pressure, start of combustion (SOC) timing, fuel-injection pressure, and intake temperature. DFI is shown to curtail engine-out soot emissions at all tested conditions. Under certain conditions, DFI can attenuate engine-out soot by over a factor of 100. In addition to producing significantly lower engine-out soot emissions, DFI enables the engine to be operated at low-NO x conditions that are not feasible with conventional diesel combustion due to high soot emissions.

42 ENGINEERING↗

Fuel flexible fuel injector

A disclosed fuel injector provides mixing of fuel with airflow by surrounding a swirled fuel flow with first and second swirled airflows that ensures mixing prior to or upon entering the combustion chamber. Fuel tubes produce a central fuel flow along with a central airflow through a plurality of openings to generate the high velocity fuel/air mixture along the axis of the fuel injector in addition to the swirled fuel/air mixture.

42 ENGINEERING↗

Fuel injector including tandem vanes for injecting alternate fuels in a gas turbine

A fuel injector for injecting fuels having a different energy density in a gas turbine is provided. A first fuel supply channel (18) and a second fuel supply channel (20) may be coaxially arranged in a fuel delivery structure (12). A first set of vanes 22 includes a radial passage (24) in fluid communication with the first channel (18) to receive a first fuel. Passage (24) branches into passages (26) each having an aperture (28) to inject the first fuel without jet in cross-flow injection. A second set of vanes (32) includes a radial passage (34) in fluid communication with the second channel (20) to receive a second fuel. Passage (34) branches into passages (36) each having an aperture (38) arranged to inject the second fuel also without jet in cross-flow injection. This arrangement may be effective to reduce flashback that otherwise may be encountered in fuels having a relatively high flame speed.

Laster, Walter Ray↗

Fuel injector for high flame speed fuel combustion

A multiple fuel capable, pre-mixed, low emission injector is provided which is particularly suited for burning high flame speed fuels. The fuel injector includes an injector body having a preliminary pre-mixing chamber, an intermediate pre-mixing chamber and a final pre-mixing chamber. A fuel distributor separates the preliminary pre-mixing chamber from the intermediate pre-mixing chamber. A guide vane separates the intermediate pre-mixing chamber from the final pre-mixing chamber.

Chen, Junhua↗

Turbine nozzle cooling with panel fuel injector

The present disclosure is directed to a combustion system including a panel fuel injector. The panel fuel injector includes a first side wall, a second side wall, and an aft wall. The first side wall and the second side wall are interconnected by the aft wall. The panel fuel injector further includes a cooling air plenum that is defined between the first side wall and the second side wall. The aft wall defines a plurality of cooling holes in fluid communication with the cooling air plenum. One or more of the cooling holes of the plurality of cooling holes is oriented towards at least one of a leading edge, a pressure side wall, or a suction side wall of a stationary nozzle disposed proximate to the aft end wall.

33 ADVANCED PROPULSION SYSTEMS↗

Flex-fuel injector for gas turbines

A fuel injector (36) for alternate fuels (26A, 26B) with different energy densities. Vanes (47B) extend radially from a fuel delivery tube structure (20B) with first and second fuel supply channels (19A, 19B). Each vane has first and second radial passages (21A, 21B) communicating with the respective fuel supply channels, and first and second sets of apertures (23A, 23B). The first fuel supply channel, first radial passage, and first apertures form a first fuel delivery pathway providing a first fuel flow rate at a given fuel delivery pathway backpressure that is essentially common to both sets of fuel delivery pathway apertures. The second fuel supply channel, second radial passage, and second apertures form a second fuel delivery pathway providing a second fuel flow rate that may be at least 1 about twice the first fuel flow rate at the given fuel delivery pathway backpressure.

33 ADVANCED PROPULSION SYSTEMS↗

Fuel injector with duct assembly

Methods and systems are provided for a fuel injector of an internal combustion engine. In one example, a fuel injector includes a body having a flange shaped to seat within a shoulder of a passage of a cylinder head. The shoulder is positioned at an inner side of the cylinder head such that the fuel injector is coupled to the cylinder head at the inner side by the flange.

Kurtz, Eric↗

Fuel injector including a lobed mixer and vanes for injecting alternate fuels in a gas turbine

A fuel injector for injecting alternate fuels having a different energy density in a gas turbine is provided. A first fuel supply channel (18) may be fluidly coupled to a radial passage (22) in a plurality of vanes (20) that branches into passages (24) (e.g., axial passages) to inject a first fuel without jet in cross-flow injection. This may be effective to reduce flashback in fuels having a relatively high flame speed. A mixer (30) with lobes (32) for injection of a second fuel may be arranged at the downstream end of a fuel delivery tube (12). A fuel-routing structure (38) may be configured to route the second fuel within a respective lobe so that fuel injection of the second fuel takes place radially outwardly relative to a central region of the mixer. This may be conducive to an improved (e.g., a relatively more uniform) mixing of air and fuel.

42 ENGINEERING↗

Combustion system with panel fuel injector

The present disclosure is directed to an annular combustion system. The annular combustion system includes an inner liner and an outer liner that define therebetween an annulus that circumscribes a centerline of the combustion system. The annulus includes a plurality of primary combustion zones defined at an upstream end thereof and further defines a plurality of secondary combustion zones downstream of the primary combustion zones. The annular combustion system further includes a plurality of fuel nozzles where at least one fuel nozzle discharges a combustible mixture into a respective primary combustion zone of the plurality of primary combustion zones. A plurality of panel fuel injectors is disposed between adjacent fuel nozzles. The plurality of panel fuel injectors extends in an axially downstream direction so as to separate adjacent primary combustion zones. Each panel fuel injector discharges a combustible mixture into at least one secondary combustion zone.

42 ENGINEERING↗

Fuel injector utilizing non-thermal plasma activation

A non-thermal plasma assisted combustion fuel injector that uses an inner and outer electrode to create an electric field from a high voltage power supply. A dielectric material is operatively disposed between the two electrodes to prevent arcing and to promote the formation of a non-thermal plasma. A fuel injector, which converts a liquid fuel into a dispersed mist, vapor, or aerosolized fuel, injects into the non-thermal plasma generating energetic electrons and other highly reactive chemical species.

42 ENGINEERING↗

System for supporting a bundled tube fuel injector within a combustor

A combustor includes an end cover having an outer side and an inner side, an outer barrel having a forward end that is adjacent to the inner side of the end cover and an aft end that is axially spaced from the forward end. An inner barrel is at least partially disposed concentrically within the outer barrel and is fixedly connected to the outer barrel. A fluid conduit extends downstream from the end cover. A first bundled tube fuel injector segment is disposed concentrically within the inner barrel. The bundled tube fuel injector segment includes a fuel plenum that is in fluid communication with the fluid conduit and a plurality of parallel tubes that extend axially through the fuel plenum. The bundled tube fuel injector segment is fixedly connected to the inner barrel.

42 ENGINEERING↗

Cap assembly for a bundled tube fuel injector

A cap assembly for a bundled tube fuel injector includes an impingement plate and an aft plate that is disposed downstream from the impingement plate. The aft plate includes a forward side that is axially separated from an aft side. A tube passage extends through the impingement plate and the aft plate. A tube sleeve extends through the impingement plate within the tube passage towards the aft plate. The tube sleeve includes a flange at a forward end and an aft end that is axially separated from the forward end. A retention plate is positioned upstream from the impingement plate. A spring is disposed between the retention plate and the flange. The spring provides a force so as to maintain contact between at least a portion of the aft end of the tube sleeve and the forward side of the aft plate.

42 ENGINEERING↗

Metal 3D Printing of Low-NOX Fuel Injectors with Integrated Temperature Sensors (Final Technical Report)

This technical report presents the exploration of design and prototyping of an Oxy-fuel injector with integrated temperature sensing capabilities using Additive Manufacturing (AM) technology. The AM process has proven itself as a viable method to fabricate complex shapes for custom-designed metallic components rapidly. The lack of assembly requirements and the virtually unlimited geometrical complexity renders the AM process particularly attractive for fabricating complex energy system components. The unique layer-by-layer fabrication technique allows the embedding of sensors within complex components early in the design process. Sensors can be embedded (without post-production component modifications) in AM-fabricated components through two distinct processes: Stop and Go or Post-Integration. The Stop and Go fabrication process allows sensor placement within a cavity during fabrication; where the process is allowed to continue upon sensor placement. Post-integration process supports selective build of customized compartments for sensors within the part. The Stop and Go process requires an extremely accurate re-alignment of the powder-bed during the restart process. Additionally, metallization and shorting of sensors due to a considerably high temperature of the AM process creates significant fabrication challenges and limit the types of sensors that can be embedded. The Post-Integration of sensors is a practical alternative for components that can be effectively designed and fabricated with pre-built complex sensor compartments without the need for post-production component modifications. The proposed effort aimed at exploring the fabrication of an oxy-fuel injector designed for high-pressure Oxy-Combustion applications (Combustor for Directly Heated Supercritical Power Cycle) with integrated temperature measurement capabilities using the AM technique. Since the current design methodology of injectors is based on conventional fabrication techniques (e.g., multi-step machining and welding processes), a new paradigm of design methodology needs to be developed for their adaptation in the AM fabrication process. One of the most challenging issues addressed in powder bed fusion is the removal of powder from internal channels/cavities as the powder to be removed has been lightly sintered during the fabrication process. In this research, a major task has been assigned to developing and evaluating powder removal techniques that will ultimately be used when removing sintered powder from cavities/channels used for sensor placement. Achieving thorough powder removal will permit the incorporation of intricate cavities, integrated fasteners, or other novel features to incorporate sensors into parts directly post-fabrication – allowing for the novel, AM-based design practices to be developed and employ for sensor integration. The designed injector was initially tested at atmospheric conditions to review its successful operation. The tests were carried out for different firing inputs; with a minimum of 55 kW and a maximum of 275 kW. Later tests were carried out for pressurized conditions between 82 kW to 275 kW firing input. A pressure of 16.35bar was observed in the combustion chamber pressure during the pressurized test of 275 kW firing input; test duration was 15 seconds. Integrated thermocouples within the injector provided temperature data for test operations. The data revealed during the atmospheric condition the injector temperature is almost unaffected by the combustion. However, during the pressurized condition, the injector temperature rapidly up to 205°C within 15 seconds; at a 275 kW firing input.

42 ENGINEERING↗

Methods and systems for a fuel injector

Methods and systems are provided for a ducted fuel injector. In one example, a method may include adjusting a temperature of combustion chamber gases in a combustion chamber and/or adjusting a fuel rail pressure in response to an amount of light sensed by a photodiode of the duct.

02 PETROLEUM↗

Panel fuel injector

The present disclosure is directed to a panel fuel injector having a first side wall that defines a plurality of first side injection outlets and a second side wall that defines a plurality of second side injection outlets. A premix air plenum, a fuel plenum, a plurality of first side premixing channels and a plurality of second side premixing channels are defined between the first side wall and the second side wall. Each first side premixing channel is in fluid communication with the premix air plenum, the fuel plenum and a respective first side injection outlet of the plurality of first side injection outlets. Each second side premixing channel is in fluid communication with the premix air plenum, the fuel plenum and a respective second side injection outlet of the plurality of second side injection outlets.

42 ENGINEERING↗

Fuel injector for use in a gas turbine engine

A fuel injector in a combustor apparatus of a gas turbine engine. An outer wall of the injector defines an interior volume in which an intermediate wall is disposed. A first gap is formed between the outer wall and the intermediate wall. The intermediate wall defines an internal volume in which an inner wall is disposed. A second gap is formed between the intermediate wall and the inner wall. The second gap receives cooling fluid that cools the injector. The cooling fluid provides convective cooling to the intermediate wall as it flows within the second gap. The cooling fluid also flows through apertures in the intermediate wall into the first gap where it provides impingement cooling to the outer wall and provides convective cooling to the outer wall. The inner wall defines a passageway that delivers fuel into a liner downstream from a main combustion zone.

42 ENGINEERING↗