Search NASA⌕ Search

SEARCH · Search NASA

Results for “GADOLINIUM OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Effect of Added Gadolinium Oxide on the Thermal Air Oxidation of Uranium Dioxide

To develop a more reliable and stable UO2-based nuclear fuel, the Pacific Northwest National Laboratory (PNNL) investigated modifying fuel with several soluble lanthanides and zirconium. This article provides the results of these studies investigating gadolinium doping at levels up to 10 mass%. The authors characterized and compared commercially- and PNNL-prepared gadolinium-doped UO2 to determine the oxygen-to-metal ratio, elemental distribution, chemical composition, physical appearance, lattice parameters, and grain structure using atomic force microscopy, scanning electron microscopy coupled with energy dispersive spectroscopy, and X-ray diffractometry. After confirming PNNL-prepared UO2 and (Gd,U)O2 were similar to commercially prepared UO2 and (Gd,U)O2, we measured the thermal behavior of these gadolinium-doped UO2 materials to air oxidation using differential scanning calorimetry and thermogravimetric analysis. Addition of gadolinium stabilized the first oxidation product U4¬O9/U3O7 and slowed the subsequent oxidation to U3O8. Comparison of our measured two-step oxidation of UO2 to U3O8 at 325°C to common gas/solid kinetic reaction models found that each oxidation step is best described as a convolution of kinetic behaviors; the gadolinium insertion into the UO2 lattice enforces a significant alteration in mechanism and oxidation rate. Noticeable changes in mechanism become apparent between 1% and 3% gadolinium content.

Uranium Dioxide, Gadolinium Oxide, Thermal Air Oxi↗

Density functional calculations for structural, electronic, and magnetic properties of gadolinium-oxide clusters

Gadolinium-oxide clusters in various sizes and stoichiometries have been systematically studied by employing the density functional theory with the generalized gradient approximation. The clusters in bulk stoichiometry are relatively more stable and their binding energies increase with the increasing size. Stoichiometric (Gd{sub 2}O{sub 3}){sub n} clusters of n = 1–3 prefer cage-like structures, whereas the clusters of n = 4–30 prefer compact structures layered by wedge-like units and exhibit a rough feature toward the bulk-like arrangement with small disorders of atomic positions. The polyhedral-cages analogous to carbon-fullerenes are stable isomers yet not the minimum energy configurations. Their stabilities can be improved by embedding one oxygen atom or a suitable cage to form core-shell configurations. The mostly favored antiferromagnetic couplings between adjacent Gd atoms are nearly degenerated in energy with their ferromagnetic couplings, resulting in super-paramagnetic characters of gadolinium-oxide clusters. The Ruderman-Kittel-Kasuya-Yosida (RKKY)-type mechanism together with the superexchange-type mechanism plays cooperation role for the magnetic interactions in clusters. We present, as a function of n, calculated binding energies, ionization potential, electron affinity, and electronic dipole moment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and optical properties of Nd{sup 3+} doped gadolinium oxide 1D nanorods

Neodymium doped gadolinium hydroxide [Nd:Gd(OH)3] nanorods were successfully synthesized at 60 °C through co-precipitation method. The dopant percentage was maintained at 5% and calcination was done at 750 °C temperature for 1 hour to form the respective neodymium doped gadolinium oxide [Nd:Gd{sub 2}O{sub 3}] nanorods. The as-formed and annealed products were investigated in detail by using powder X-ray diffraction (XRD) pattern, scanning electron microscopy (SEM) with an energy dispersive X-ray spectrum (EDX), high-resolution transmission electron microscopy (HRTEM) and photoluminescence (PL) spectrophotometry.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Synthesis, characterization and effect of low energy Ar ion irradiation on gadolinium oxide nanoparticles

Graphical abstract: . The figure depicts Raman spectra of (A) unirradiated and (B) 80 keV Ar ion irradiated nanoscale gadolinium oxide (Gd{sub 2}O{sub 3}) systems. Intense Raman signals corresponding to two B{sub g} modes at 288 and 384 cm{sup -1} are observed for irradiated sample along with the evolution of a new peak at 202 cm{sup -1} due to surface defects. Highlights: {yields} Gadolinium oxide nanoparticles are synthesized via a selective reduction route. {yields} 80 keV Ar ion-irradiated specimen showed better symmetric emission than pristine. {yields} Irradiation led point defect contribution was studied through spectroscopic means. -- Abstract: In this work, we report on the surfactant assisted synthesis of gadolinium oxide (Gd{sub 2}O{sub 3}) nanoparticles and their characterization through various microscopic and spectroscopic tools. Exhibiting a monoclinic phase, the nanoscale Gd{sub 2}O{sub 3} particles are believed to be comprising of crystallites with an average size of {approx}3.2 nm, as revealed from the X-ray diffraction analysis. The transmission electron microscopy has predicted a particle size of {approx}9 nm and an interplanar spacing of {approx}0.28 nm. Fourier transform infrared spectroscopy studies show that Gd-O inplane vibrations at 536.8 and 413.3 cm{sup -1} were more prominent for 80-keV Ar-ion irradiated Gd{sub 2}O{sub 3} nanosystem than unirradiated system. The photoluminescence (PL) spectra of irradiated specimen have revealed an improvement in the symmetry factor owing to significant enhancement of surface-trap emission, compared to the band-edge counterpart. Irradiation induced creation of point defects (oxygen vacancies) were predicted both from PL and electron paramagnetic resonance (EPR) studies. Further, the Raman spectra of the irradiated sample have exhibited notable vibrational features along with the evolution of a new peak at {approx}202 cm{sup -1}. This can be ascribed to an additional Raman active vibrational response owing to considerable modification of the nanostructure surface as a result of ion bombardment. Probing nanoscale defects through prime spectroscopy tools would find a new avenue for precise tuning of physical properties with generation and annihilation of defects.

36 MATERIALS SCIENCE↗

Structural, morphological and optical investigations on Sm{sup 3+} doped gadolinium oxide nanorods

One dimensional uniform Sm{sup 3+} doped gadolinium hydroxide nanorods have been prepared via simple co– precipitation technique at 60 °C temperature for 1 hour. The samples were calcinated at 750 °C to obtain Sm{sup 3+} doped gadolinium oxide nanorods. The 1D nanorods were then subjected to different characterization techniques to ascertain its structural stability and its morphology were investigated using high–resolution transmission electron microscopy. Photoluminescence (PL) spectrophotometry was investigated and the obtained results were discussed in detail.

36 MATERIALS SCIENCE↗

Plasma-enhanced atomic layer deposition and etching of high-k gadolinium oxide

Atomic layer deposition (ALD) of high-quality gadolinium oxide thin films is achieved using Gd(iPrCp){sub 3} and O{sub 2} plasma. Gd{sub 2}O{sub 3} growth is observed from 150 to 350 deg. C, though the optical properties of the film improve at higher temperature. True layer-by-layer ALD growth of Gd{sub 2}O{sub 3} occurred in a relatively narrow window of temperature and precursor dose. A saturated growth rate of 1.4 A/cycle was observed at 250 deg. C. As the temperature increases, high-quality films are deposited, but the growth mechanism appears to become CVD-like, indicating the onset of precursor decomposition. At 250 deg. C, the refractive index of the film is stable at {approx}1.80 regardless of other deposition conditions, and the measured dispersion characteristics are comparable to those of bulk Gd{sub 2}O{sub 3}. XPS data show that the O/Gd ratio is oxygen deficient at 1.3, and that it is also very hygroscopic. The plasma etching rate of the ALD Gd{sub 2}O{sub 3} film in a high-density helicon reactor is very low. Little difference is observed in etching rate between Cl{sub 2} and pure Ar plasmas, suggesting that physical sputtering dominates the etching. A threshold bias power exists below which etching does not occur; thus it may be possible to etch a metal gate material and stop easily on the Gd{sub 2}O{sub 3} gate dielectric. The Gd{sub 2}O{sub 3} film has a dielectric constant of about 16, exhibits low C-V hysteresis, and allows a 50 x reduction in gate leakage compared to SiO{sub 2}. However, the plasma enhanced atomic layer deposition (PE-ALD) process causes formation of an {approx}1.8 nm SiO{sub 2} interfacial layer, and generates a fixed charge of -1.21 x 10{sup 12} cm{sup -2}, both of which may limit use of PE-ALD Gd{sub 2}O{sub 3} as a gate dielectric.

36 MATERIALS SCIENCE↗

High longitudinal relaxivity of ultra-small gadolinium oxide prepared by microsecond laser ablation in diethylene glycol

Ultra-small gadolinium oxide (Gd{sub 2}O{sub 3}) can be used as T{sub 1}-weighted Magnetic Resonance Imaging (MRI) contrast agent own to its high longitudinal relaxivity (r{sub 1}) and has attracted intensive attention in these years. In this paper, ultra-small Gd{sub 2}O{sub 3} nanoparticles of 3.8 nm in diameter have been successfully synthesized by a microsecond laser ablating a gadolinium (Gd) target in diethylene glycol (DEG). The growth inhibition effect induced by the large viscosity of DEG makes it possible to synthesize ultra-small Gd{sub 2}O{sub 3} by laser ablation in DEG. The r{sub 1} value and T{sub 1}-weighted MR images are measured by a 3.0 T MRI spectroscope. The results show these nanoparticles with a high r{sub 1} value of 9.76 s{sup -1} mM{sup -1} to be good MRI contrast agents. We propose an explanation for the high r{sub 1} value of ultra-small Gd{sub 2}O{sub 3} by considering the decreasing factor (surface to volume ratio of the nanoparticles, S/V) and the increasing factor (water hydration number of the Gd{sup 3+} on Gd{sub 2}O{sub 3} surface, q), which offer a new look into the relaxivity studies of MRI contrast agents. Our research provides a new approach to preparing ultra-small Gd{sub 2}O{sub 3} of high r{sub 1} value by laser ablation in DEG and develops the understanding of high relaxivity of ultra-small Gd{sub 2}O{sub 3} MRI contrast agents.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Defect induced mobility enhancement: Gadolinium oxide (100) on Si(100)

Growth of predominantly single crystal (100)-oriented gadolinium oxide (Gd{sub 2}O{sub 3}) on a p-type Si(100) and growth of a polycrystal with a predominant Gd{sub 2}O{sub 3}(100) crystallite on a n-type Si(100) was performed using molecular beam epitaxy. Despite a poorer crystal structure than Gd{sub 2}O{sub 3}(110), an enhancement in carrier mobility can be found only from the Gd{sub 2}O{sub 3}(100)/n-type Si(100) interface. The mobility of 1715-1780 cm{sup 2}/V {center_dot} s was observed at room temperature, for carrier concentration >10{sup 20} cm{sup -3}. This accumulation of the electrons and the mobility enhancement may arise from the two-dimensional confinement due to charge transfer across the interface similar to transfer doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Characteristics of Gadolinium Oxide Nanoparticles Using Terahertz Spectroscopy

The penetration property of the terahertz electromagnetic (THz) wave is relevant to its use. We used the THz wave spectroscopy system which easily penetrates some materials that do not contain water, e.g., plastic and ceramics. The system has been developed for several purposes, including measuring the properties of semiconductors and bio-materials, and detecting plastic bombs and ceramic knives at airports. It is also used for medical imaging systems, such as magnetic resonance imaging (MRI), at some research institutes. It can show not only the difference in amplitude, but also the difference of the phase of each point of sample. MRI technology usually uses contrast agents to enhance the quality of the image. Gadolinium diethylenetriamine pentaacetic acid (Gd-DTPA), made with a heavy metal ion, is commonly used as a clinical MRI contrast agent. Gadolinium oxide (Gd{sub 2}O{sub 3}) nanoparticle is a new contrast agent. It serves to equip the core of each particle with antibodies or ligands. It can freely circulate in blood vessels without amassing in the liver or lungs. This study shows the characteristics of gadolinium oxide nanoparticles to further advance terahertz medical imaging.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Performance improvement of gadolinium oxide resistive random access memory treated by hydrogen plasma immersion ion implantation

Characteristics improvement of gadolinium oxide (Gd{sub x}O{sub y}) resistive random access memories (RRAMs) treated by hydrogen plasma immersion ion implantation (PIII) was investigated. With the hydrogen PIII treatment, the Gd{sub x}O{sub y} RRAMs exhibited low set/reset voltages and a high resistance ratio, which were attributed to the enhanced movement of oxygen ions within the Gd{sub x}O{sub y} films and the increased Schottky barrier height at Pt/Gd{sub x}O{sub y} interface, respectively. The resistive switching mechanism of Gd{sub x}O{sub y} RRAMs was dominated by Schottky emission, as proved by the area dependence of the resistance in the low resistance state. After the hydrogen PIII treatment, a retention time of more than 10{sup 4} s was achieved at an elevated measurement temperature. In addition, a stable cycling endurance with the resistance ratio of more than three orders of magnitude of the Gd{sub x}O{sub y} RRAMs can be obtained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetically induced optical activity and dichroism of gadolinium oxide nanoparticle-based ferrofluids

The present work reports on magnetically induced optical activity (such as Faraday rotation and linear dichroism) of pristine and gamma-irradiated gadolinium oxide (Gd{sub 2}O{sub 3}) nanoparticle-based ferrofluids. The ferrofluids were produced by dispersing N-cetyl-N,N,N-trimethyl ammonium bromide (CTAB)-coated {approx}9-nm-sized Gd{sub 2}O{sub 3} particles in a carrier fluid of ethanol. The ferrofluids were then irradiated with 1.25 MeV energetic gamma rays (dose: 868 Gy and 2.635 kGy). Irradiation-led formation of a number of point defects was revealed through high resolution electron microscopy. The interaction of light with the ionized point defects is believed to have caused substantial improvement in the magneto-optic response of irradiated magnetic fluids.

36 MATERIALS SCIENCE↗

Gadolinium oxide decorated multiwalled carbon nanotube/tridoped titania nanocomposites for improved dye degradation under simulated solar light irradiation

Graphical abstract: Illustration of the collaborative effect between MWCNT-Gd and Gd,N,S-TiO{sub 2} towards degradation of AB 74. - Highlights: • MWCNT-Gd/tridoped titania was successfully prepared via a sol-gel method. • XPS revealed the presence of Ti, C, O, S, N and Gd in MWCNT-Gd/Gd,N,S-TiO{sub 2}. • MWCNT-Gd/Gd,N,S-TiO{sub 2} displayed 100% degradation of acid blue 74 in 150 min. • Over 60% TOC removal by MWCNT-Gd/Gd,N,S-TiO{sub 2}. - Abstract: Neodymium/gadolinium/europium, nitrogen and sulphur tridoped titania (Nd/Gd/Eu, N,S-TiO{sub 2}) was hybridised with pre-synthesised gadolinium oxide decorated multiwalled carbon nanotubes (MWCNT-Gd) using a sol–gel method. Subsequent to drying and calcination, composite photocatalysts: MWCNT-Gd/Nd,N,S-TiO{sub 2}, MWCNT-Gd/Gd,N,S-TiO{sub 2} and MWCNT-Gd/Eu,N,S-TiO{sub 2}, were obtained and characterised using TEM, SEM-EDX, UV–vis, XPS, XRD and FT-IR. Acid blue 74 (AB74) was used as a model dye to investigate the photocatalytic degradation properties of the prepared materials under simulated solar light irradiation. Coupling the different tridoped titania with MWCNT-Gd enhanced their activity compared to MWCNT/TiO{sub 2}, MWCNT-Gd/TiO{sub 2} and MWCNT/Gd,N,S-TiO{sub 2}. MWCNT-Gd/Gd,N,S-TiO{sub 2} showed the highest activity towards AB74 degradation reaching 100% decolourisation after 150 min of irradiation. Total organic carbon analysis revealed that over 50% of the AB74 molecules were completely mineralised after 180 min of irradiation in the presence of MWCNT-Gd/Gd,N,S-TiO{sub 2}.

36 MATERIALS SCIENCE↗

Designing Tripodal and Triangular Gadolinium Oxide Nanoplates and Self-Assembled Nanofibrils as Potential Multimodal Bioimaging Probes

Here, we report the shape-controlled synthesis of tripodal and triangular gadolinium oxide (Gd2O3) nanoplates. In the presence of lithium ions, the shape of the nanocrystals is readily controlled by tailoring reaction parameters such as temperature and time. We observe that the morphology transforms from an initial tripodal shape to a triangular shape with increasing reaction time or elevated temperatures. Highly uniform Gd2O3 nanoplates are self-assembled into nanofibril-like liquid-crystalline superlattices with long-range orientational and positional order. In addition, shape-directed self-assemblies are investigated by tailoring the aspect ratio of the arms of the Gd2O3 nanoplates. Due to a strong paramagnetic response, Gd2O3 nanocrystals are excellent candidates for MRI contrast agents and also can be doped with rare-earth ions to form nanophosphors, pointing to their potential in multimodal imaging. In this work, we investigate the MR relaxometry at high magnetic fields (9,4 and 14.1 T) and the optical properties including near-IR to visible upconversion luminescence and X-ray excited optical luminescence of doped Gd2O3 nanoplates. The complex shape of Gd2O3 nanoplates, coupled with their magnetic properties and their ability to phosphoresce under NIR or X-ray excitation which penetrate deep into tissue, makes these nanoplates a promising platform for multimodal imaging in biomedical applications.

Paik, T↗

Multi-material direct ink writing and co-sintering of gadolinium oxide – zirconium oxide components

Methods for fabrication of multi-material or functionally graded ceramic composite architectures are of interest for numerous applications. However, conventional co-sintering of multi-material ceramic parts is a challenge because differences in the sintering behavior of the two materials leads to interfacial strain and, ultimately, component failure. Direct ink writing (DIW) is an extrusion-based additive manufacturing process that excels at multi-material printing because multiple extrusion nozzles can be installed on the same gantry system. Furthermore, the use of DIW as a method to fabricate multi-material ceramic green bodies offers an additional variable for controlling and potentially matching sintering kinetics in the slurry formulation used for two dissimilar feedstocks. In the work documented in this manuscript, we explored two strategies to successfully co-sinter multi-material ceramic oxides: slurry optimization to match sintering kinetics and material gradients to step from one material to another. This manuscript also quantifies the allowable mismatch that avoids part cracking in solid solution forming multi-material systems and discusses best strategies to reduce mismatch during co-sintering. Inks composed of gadolinium oxide (Gd 2 O 3 ) and zirconium oxide (ZrO 2 ), a surrogate for uranium oxide (UO 2 ), were thermally matched, which resulted in a sintering mismatch reduction of over 10%. It was found that ~1% mismatch is tolerable during debind cycles and that ~5% mismatch is manageable during sintering cycles after slurry formulations are optimized to match the sintering behavior. Use of continuous gradients is shown to reduce sintering mismatch, although geometric resolution may be lost due to solid solution formation.

Snarr, Patrick L. [Oak Ridge National Laboratory (↗

Observation of green emission from Ce3+ doped gadolinium oxide nanoparticles

Green emission at around 500 nm is observed in Gd2O3:Ce3+ nanoparticles and the intensity is highly dependent on the concentration of Ce3+ in the nanoparticles. The luminescence of this emission displays both picosecond and millisecond lifetimes. The msec lifetime is over four orders of magnitude longer than typical luminescence lifetimes (10-40 ns) of Ce3+ in traditional Ce3+ doped phosphors and therefore likely originates from defect states. The picosecond lifetime is shorter than the typical Ce3+ value and is also likely due to defect or surface states. When the samples are annealed at 700 oC, this emission disappears possibly due to changes in the defect moieties or concentration. In addition, a blue emission at around 430 nm is observed in freshly-prepared Gd2O3 undoped nanoparticles which is attributed to the stabilizer, polyethylene glycol biscarboxymethyl ether. Upon aging, the undoped particles show similar emission to the doped particles with similar luminescence lifetimes. When Eu3+ ions are co-doped in Gd2O3:Ce nanoparticles, both the green emission and the emission at 612 nm from Eu3+ are observed.

36 MATERIALS SCIENCE↗

Separation of terbium from proton-irradiated gadolinium oxide targets – development of an effective, scalable and automatable process

This work reports an effective and scalable radiochemical separation process for isolating terbium from Gd 2 O 3 . The separation process uses three commercially available extraction chromatography resin columns, has been implemented on a computer-controlled chemistry module, and tested with 100 mg quantities of proton-irradiated nat Gd 2 O 3 . Here, the 4-hour separation procedure isolated radioterbium in 1.3 mL of 0.01 M HCl with 80 ±8% radiochemical yield and a Gd decontamination factor >(1.2 ± 0.3)·10 5 .

Adjacent lanthanide separation↗