SEARCH · Search NASA
Results for “GAS DISSOCIATION”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Can Glacial Sea‐Level Drop‐Induced Gas Hydrate Dissociation Cause Submarine Landslides?
Abstract We conducted two‐dimensional numerical simulations to investigate the mechanisms underlying the strong spatiotemporal correlation observed between submarine landslides and gas hydrate dissociation due to glacial sea‐level drops. Our results suggest that potential plastic deformation or slip could occur at localized and small scales in the shallow‐water portion of the gas hydrate stability zone (GHSZ). This shallow‐water portion of the GHSZ typically lies within the area enclosed by three points: the BGHSZ–seafloor intersection, the seafloor at ∼600 m below sea level (mbsl), and the base of the GHSZ (BGHSZ) at ∼1,050 mbsl in low‐latitude regions. The deep BGHSZ (>1,050 mbsl) could not slip; therefore, the entire BGHSZ was not a complete slip surface. Glacial hydrate dissociation alone is unlikely to cause large‐scale submarine landslides. Observed deep‐water (much greater than 600 mbsl) turbidites containing geochemical evidence of glacial hydrate dissociation potentially formed from erosion or detachment in the GHSZ pinch‐out zone.
Sensitivity study of hydrogen Soret transport in yttrium Hydride-Based nuclear fuel
Yttrium hydride is an excellent solid neutron moderator material for high temperature nuclear reactor applications due to its high hydrogen density and exceptional hydride stability at high temperatures. Despite these attractive characteristics, the details of how hydrogen behaves within yttrium hydride while temperature gradients exist are still not well understood. The evolution of the hydrogen composition profile resulting from a temperature gradient requires knowledge of hydrogen’s heat of transport, a critical parameter that has not yet been measured for this material. In this work, we perform hydride redistribution, hydrogen dissociation, and hydrogen leakage calculations while varying the Soret heat of transport of hydrogen in yttrium hydride to elucidate the sensitivity of hydride stability under temperature gradients to this parameter. This study analyzes hydride stability of a hypothetical uranium-yttrium hydride nuclear fuel design during operation of a high temperature liquid metal-cooled nuclear reactor. Assuming U-YH x could be fabricated in a physically stabilized manner, this fuel system can likely maintain hydride stability while operating at very high power densities and temperatures. We find that even though the hydrogen dissociation pressure in the gas gap does vary by several percent as the heat of transport temperature parameter is varied, the hydrogen content in the U-YH x fuel meat is relatively insensitive to this parameter over the course of a high burnup fuel cycle; this is due to yttrium hydride’s excellent hydrogen retention under the high temperature conditions considered here. Here, this suggests that hydride stability analyses are insensitive to the value of the Soret heat of transport in U-YH x under steady state liquid metal-cooled reactor conditions. However, the susceptibility to internal gas overpressurization-induced stress-rupture of the cladding during a high temperature transient is more sensitive to this parameter due to the non-linear dependence of hydrogen gas dissociation pressure vs. composition and temperature.
Quantifying the Known Unknown: Including Marine Sources of Greenhouse Gases in Climate Modeling
Researchers have recently estimated that Arctic submarine permafrost currently traps 60 billion tons of methane and contains 560 billion tons of organic carbon in seafloor sediments and soil, a giant pool of carbon with potentially large feedbacks on the climate system. Unlike terrestrial permafrost, the submarine permafrost system has remained a “known unknown” because of the difficulty in acquiring samples and measurements. Consequently, this potentially large carbon stock never yet considered in global climate models or policy discussions, represents a real wildcard in our understanding of Earth’s climate. This report summarizes our group’s effort at developing a numerical modeling framework designed to produce a first-of-its-kind estimate of Arctic methane gas releases from the marine sediments to the water column, and potentially to the atmosphere, where positive climate feedback may occur. Newly developed modeling capability supported by the Laboratory Directed Research and Development (LDRD) program at Sandia National Laboratories now gives us the ability to probabilistically map gas distribution and quantity in the seabed by using a hybrid approach of geospatial machine learning, and predictive numerical thermodynamic ensemble modeling. The novelty in this approach is its ability to produce maps of useful data in regions that are only sparsely sampled, a common challenge in the Arctic, and a major obstacle to progress in the past. By applying this model to the circum-Arctic continental shelves and integrating the flux of free gas from in situ methanogenesis and dissociating gas hydrates from the sediment column under climate forcing, we can provide the most reliable estimate of a spatially and temporally varying source term for greenhouse gas flux that can be used by global oceanographic circulation and Earth system models (such as DOE’s E3SM). The result will allow us to finally tackle the wildcard of the submarine permafrost carbon system, and better inform us about the severity of future national security threats that sustained climate change poses.
Spatial Decorrelation of Young Stars and Dense Gas as a Probe of the Star Formation–Feedback Cycle in Galaxies
The spatial decorrelation of dense molecular gas and young stars observed on ≲1 kpc scales in nearby galaxies indicates rapid dispersal of star-forming regions by stellar feedback. In this work, we explore the sensitivity of this decorrelation to different processes controlling the structure of the interstellar medium, the abundance of molecular gas, star formation, and feedback in a suite of simulations of an isolated dwarf galaxy with structural properties similar to NGC 300 that self-consistently model radiative transfer and molecular chemistry. Our fiducial simulation reproduces the magnitude of decorrelation and its scale dependence measured in NGC 300, and we show that this agreement is due to different aspects of feedback, including H 2 dissociation, gas heating by the locally variable UV field, early mechanical feedback, and supernovae. In particular, early radiative and mechanical feedback affects the correlation on ≲100 pc scales, while supernovae play a significant role on ≳ 100 pc scales. The correlation is also sensitive to the choice of the local star formation efficiency per free fall time, ϵ ff , which provides a strong observational constraint on ϵ ff when the global star formation rate is independent of its value. Finally, we explicitly show that the degree of correlation between the peaks of molecular gas and star formation density is directly related to the distribution of the lifetimes of star-forming regions.
An experimental study on gas-liquid phase fluid migration in hydrate-bearing sediments during hydrate dissociation
Natural gas hydrate production tests face problems such as severe sand blockage, poor gas-liquid phase separation, and significant land subsidence. This is because of the insufficient understanding of the complex phase transition and gas-liquid multi-phase fluid migration during hydrate dissociation. In hydrate-bearing sediment systems, hydrate phase transition couples with gas-liquid fluid migration. The phase transition causes changes in pore structure, which in turn modifies porous infiltration parameters and fluid flow capacity. Meanwhile, alterations in phase interfaces affect key parameters like surface tension and wettability. Gas-liquid fluid migration influences heat and mass transfer, thus affecting phase equilibrium and dissociation rates. To bridge the gap in describing gas-liquid fluid migration during hydrate dissociation in experiments, this research innovatively integrated an unsteady-state gas displacement by water and a quantitative hydrate dissociation process, independently developed a multi-phase seepage experimental system suitable for hydrate dissociation and determined the relationship between seepage parameters and hydrate saturation under different porosity. The results are as follows: a) Core samples with higher initial porosity show a greater recovery rate of fluid flow capacity. b) The retarding effect of multi-phase fluid has a more significant impact on the migration of the wetting phase fluid (water) than that of the non-wetting phase fluid (methane). c) During hydrate dissociation, the evolution of absolute permeability shows an “S-shaped” pattern, and the evolution of relative permeability shows a “wiring-harness” pattern. In conclusion, the findings can provide a theoretical basis for preventing geological disasters and for geotechnical engineering design during hydrate production.
Dissociation of gas-phase anisole induced by low-energy electron interactions: understanding patterns of aromatic bond cleavage
Abstract In view of elucidating the fragmentation patterns of aromatic systems induced by low-energy electron interactions, dissociative electron attachment (DEA) to gas-phase anisole was performed. Anionic fragments resulting from this DEA process were detected by a quadrupole mass spectrometer, and ion yields of those fragments as a function of incident electron energy were rendered. Our study showed the formation of CH 3 − , HCC − , and OCH 3 − fragments, suggesting that various dissociation channels proceed out of DEA to anisole. We employed density functional theory to compute thermodynamic threshold energies for each potential dissociation channel. Those theoretical calculations supported the prediction that the CH 3 − and OCH 3 − fragments form via mechanisms of single-bond cleavage; the HCC − fragments may form through two-, three-, or four-body dissociation channels that entail hydrogen transfers and the cleavage of multiple aromatic bonds. The experimental resonance energies that form the CH 3 − , HCC − , and OCH 3 − fragments were 6.0 eV, 5.8 and 9.7 eV, and 9.8 eV, respectively. Given the classification of anisole as a monosubstituted aromatic species, our results explain generalizable patterns of electron-mediated dissociation in aromatic systems.
Integration of Electromagnetic Geophysics Forward Simulation in Coupled Flow and Geomechanics for Monitoring a Gas Hydrate Deposit Located in the Ulleung Basin, East Sea, Korea
We investigate the feasibility of electromagnetic (EM) geophysics methods to detect the dissociation of gas hydrate specifically from a gas hydrate deposit located in the Ulleung Basin, East Sea, Korea via an integrated flow-geomechanics-EM geophysics simulation. To this end, coupled flow and geomechanics simulation is first performed with the multiple porosity model employed, where a mixed formulation with the finite volume (FV) and finite element (FE) methods are taken for the flow and geomechanics, respectively. From the saturation and porosity fields obtained from the coupled flow and geomechanics, the electrical conductivity model is established for the EM simulation. Solving the partial differential equation of electrical diffusion which is linearized using the 3D finite element method (FEM), the EM fields are then computed. For numerical experiments, particularly two approaches in the configuration for the EM methods are compared in this contribution: the surface-to-surface and the surface-to-borehole methods. When the surface-to-surface EM method is employed, the EM is found to be less sensitive, implying low detectability. Especially for the short term of production, the low detectability is attributed to the similarity of electrical resistivity between the dissociated gas (CH4) and hydrate as well as the specific dissociation pattern within the intercalated composites of the field. On the other hand, when the surface-to-borehole EM method is employed, its sensitivity to capture the produced gas flow is improved, confirming its detectability in monitoring gas flow. Hence, the EM geophysics simulation integrated with coupled flow and geomechanics can be a potential tool for monitoring gas hydrate deposits.
A pseudo-kinetic model to simulate phase changes in gas hydrate bearing sediments
Herein, modeling of the phase transitions anticipated in gas hydrate bearing sediments (GHBS) is critical for a proper understanding of time-dependent changes in states and volumes (e.g. the production of methane from this type of soils). We propose a new pseudo-kinetic approach to simulate the typical phase changes anticipated in GHBS, using published experimental results involving gas hydrate dissociation that are the basis of a widely used kinetic model. The proposed pseudo-kinetic model is formulated in the pressure-temperature (P-T) plane and assumes a rate of gas hydrate dissociation (or formation) proportional to the distance between the current state and the phase boundary. The model consists of only one parameter and is simple to implement in numerical simulators. A similar concept is used to model ice formation/thawing phenomena, but based on the ice/liquid-water phase boundary. We implemented the pseudo-kinetic model in a fully coupled thermo-hydro-chemo-mechanical (THCM) finite element code and validated it against experimental results performed on the dissociation of synthetic gas hydrate. We also evaluated the pseudo-kinetic model using synthetic cases covering several scenarios associated with gas hydrate formation/dissociation and ice formation/thawing. The model successfully reproduced the gas production test from a natural GHBS core from Korea (scaled gas venting experiment over 14 h), and also the formation of gas hydrate and ice in permafrost in Alaska (over 2 × 10 6 years). -The analyses show the versatility of the proposed pseudo-kinetic approach by applying it to model the different types of phase transitions typically encounter in GHBS. The simple formulation, easy implementation in numerical simulator, and reduced number of parameters (only one per phase change) make this model an attractive option for simulating phase transformations in problems involving GHBS.
Numerical Simulations in Support of a Long-Term Test of Gas Production from Hydrate Accumulations on the Alaska North Slope: Reservoir Response to Interruptions of Production (Shut-Ins)
In this work, we investigate by means of numerical simulation a planned year-long field test of depressurization-induced production from a permafrost-associated hydrate reservoir on the Alaska North Slope at the site of the recently drilled Hydrate-01 Stratigraphic Test Well. The main objective of this study is to assess quantitatively the impact of temporary interruptions (well shut-ins) on the expected fluid production performance from the B1 Sand of the stratigraphic Unit B during controlled depressurization over different time scales, as well as on other relevant aspects of the system response that have the potential to significantly affect the design of the field test. We consider eight different cases of depressurization, including (a) rapid depressurization over a 60-day period to a terminal bottomhole pressure P W of 2.8 MPa and (b) a slower depressurization rate to a final P W of 0.6 MPa at the end of the year-long production test, in addition to (c) a multi-step depressurization regime and (d) a quasi-linear continuous depressurization strategy. The results of the study indicate that shut-ins obviously reduce gas release and production during and immediately after their occurrence, but their longer-term effects are strongly dependent on the depressurization regime and on the time of observation, covering the entire range of potential outcomes. Shut-ins (a) have a universally strong negative effect when quasi-linear depressurization is involved regardless of the length of the production period, and (b) have a strong positive effect in multi-step depressurization schemes that becomes apparent earlier for large initial pressure drops, but (c) can also appear to have practically no effect for slow stepwise depressurization at the end of the year-long production test. Shut-ins lead to a rapid reformation of hydrates, even to the point of disappearance of a free gas phase in the reservoir. Rapid depressurization regimes lead to early maximum rates of hydrate dissociation and gas production, while the maximum rates occur at the end of the production test for the cases of slower depressurization. Shut-ins do not appear to have a significant impact on water production, as the cessation of production is followed by higher rates production when depressurization resumes. Similarly, (a) the fraction of produced CH 4 originating from exsolution from the water, (b) the water-to-gas ratio, and (c) the rate of replenishment of produced water by boundary inflows do not appear significantly affected by shut-ins, the effects of which seem to be temporary in the majority of the cases. The study confirmed the superiority of multi-step depressurization methods as the most effective strategies for hydrate dissociation and gas production and showed that two observation wells (located at distances of 30 and 50 m from the production well) are appropriately positioned and both able to capture the P, T, and S G behavior during the fluid production and shut-ins in any of the eight cases we investigated.
ASMS 2024 Investigation of Uranyl Perchlorate Anion Complexes in the Gas Phase via Infrared Multiphoton Dissociation and Collision Induced Dissociation
Investigation of Uranyl Perchlorate Anion Complexes in the Gas Phase via Infrared Multiphoton Dissociation and Collision Induced Dissociation Brittany D. M. Hodges, Christopher A. Zarzana, JungSoo Kim, Jonathan Martens, and W. C. M. Berden Introduction (120 words max) Effects of electronic structure on chemical bonding and reactivity play critical roles shaping the chemical bonding and reactivity behaviors of heavy elements. Understanding the role of f electrons in bond formation between the actinide-series elements like uranium with other ligands is critical for solving technical challenges associated with these heavy elements, important to nuclear fuel cycles, efficient separations of rare earth metals, and understanding the chemistry of stored nuclear fuels and related environmental management sites. In this study, we further examine the interactions between uranyl and the perchlorate ion in order to understand the structures of these ions through the use of IRMPD. Here we report the IRMPD spectra of [UO2(ClO4)3]-, [UO3(ClO4)2]-, and a proposed transition state. Methods (120 word max) IRMPD spectra and CID spectra were acquired using a Bruker amaZon QIT/MS instrument at the Free-Electron Lasers for Infrared eXperiments (FELIX) laboratory at Radboud University. The FELIX QIT/MS is modified to allow for the high-intensity tunable IR beam from FELIX to be directed into the ion packet, resulting in multiphoton dissociation that is measured only when the IR frequency is in resonance with an adequately high absorption vibrational mode of the mass-selected complex. DFT geometry optimizations and frequency calculations using the Gaussian suite of programs were performed using B3LYP, TPSSh, and PBE0 level of theory with 6-31+G(d) basis for the O, C, H, and N atoms and the SDD basis set for U. The SDD basis set employs the Stuttgart/Dresden effective core potential. Preliminary Data or Plenary Speakers Abstract (300 words max) Metal ion clusters of uranyl perchlorate were formed via direct electrospray ionization. For each metal ligand complex of interest, the parent ion was isolated and collision induced dissociation fragmentation and Infrared Multiphoton Dissociation (IRMPD) fragmentation spectra were acquired. Results presented here are the first look at the IRMPD spectra of [UO3(ClO4)2]-, [UO2(ClO4)3]-. Structures were examined using Gaussian at different levels of theory B3LYP level of theory, TPPSh and PBE0 levels, to reflect the behaviors of uranium metal ligand complexes most accurately. In these structures, we identified an overlap between each of these uranyl stretches resulting in their largely being obscured by a perchlorate mode. The CID product spectra agree with similar structures reported by Groenewold for uranyl nitrate in 2006 (10.1021/ja058106n).
Investigation of Uranyl Perchlorate Anion Complexes in the Gas Phase via Infrared Multiphoton Dissociation and Collision‐Induced Dissociation
The infrared multiphoton dissociation spectrum of the gas-phase uranyl perchlorate anion ([UO 2 (ClO 4 ) 3 ] − ) was measured. Here, the asymmetric uranyl stretch lies somewhere between 930 and 1030 cm −1 , though it could not be deconvoluted from a closely located perchlorate stretching mode. The experimentally measured spectrum was in good agreement with spectra calculated using density functional theory with the B3LYP and TPSSh functionals and Grimme's D3 dispersion corrections with Becke–Johnson damping. The calculations suggest that the asymmetric uranyl stretch lies in the range of 970–980 cm −1 , about 20–30 cm −1 higher than for the analogous uranyl trinitrato complex and consistent with perchlorate as a weaker ligand than nitrate. Like the uranyl trinitrato anion, fragmentation of [UO 2 (ClO 4 ) 3 ] − by collision-induced dissociation resulted in loss of a ClO 3 • radical to form [UO 3 (ClO 4 ) 2 ] − . Infrared multiphoton dissociation measurements of [UO 3 (ClO 4 ) 2 ] − indicate that the structure of the product ion has an O − ligand bound to the uranyl in a T-arrangement and two perchlorate ligands, matching the findings from uranyl nitrato complexes. The uranyl stretch in this complex was slightly separated from the perchlorate modes and was measured at 906 cm −1 , slightly higher than for the analogous nitrate complex, again consistent with perchlorate as a weaker ligand than nitrate in the gas phase.
Using Machine Learning and Fluid Flow Modeling to Predict the Response of Marine Sediments around the Cascadia Margin to Gas Formation and Hydrate Dissociation
Explore the source record for details and available documents.
A Novel Relative Permeability Model for Gas and Water Flow in Hydrate-Bearing Sediments With Laboratory and Field-Scale Application
In a producing gas hydrate reservoir the effective porosity available for fluid flow constantly changes with dissociation of gas hydrate. Therefore, accurate prediction of relative permeability using legacy models (e.g. Brooks-Corey (B-C), van Genuchten, etc.) that were developed for conventional oil and gas reservoirs would require empirical parameters to be calibrated at various S h over its range of variation, but such calibrations are precluded because of lack of experimental relative permeability data. This study proposes a new relative permeability model for gas hydrate-bearing media that is a function of maximum capillary pressure, capillary entry pressure, pore size distribution index, residual saturations, hydrate saturation, and four other constants. The three novel features of the proposed model are: (i) requires fitting its six empirical parameters only once using experimental data from any single S h , and the same set of empirical parameters predict relative permeability at all S h , (ii) includes the effect of capillarity, and (iii) includes the effect of pore-size distribution. From practical standpoint, the model can be used to simulate multiphase flow in gas hydrate-bearing sediments where the proposed relative permeability can account for the evolving hydrate saturation. The proposed model is implemented in a numerical simulator and the wall time required to perform simulations using the proposed model is shown to be similar to the time it takes to run same simulations with the B-C model. The proposed model is a step forward towards achieving the goal of physically accurate modeling of multiphase flow for gas hydrate-bearing sediments that accounts for the effect of gas hydrate saturation change on relative permeability.
Gas Stopper Developments for Improved Purity and Intensity of Low-Energy, Rare Isotope Ion Beams (Final Technical Report)
This final technical report summarizes the work of the Michigan State University (MSU) team supported by grant # DE-SC0021423 awarded by the Office of Nuclear Physics, Department of Energy. Objectives: The successful fulfillment of the FRIB science mission hinges on ensuring the availability of fast, stopped, and reaccelerated beams consisting of rare isotopes. This project's research and development focus was dedicated to supporting the advancement and creation of a cutting-edge linear gas stopper. The primary aim is to efficiently convert the high-intensity fast beams of rare isotopes provided by FRIB into high-quality, low-energy beams. These beams are essential for conducting stopped beam experiments or for subsequent reacceleration. The overarching goal is to advance technology, aiming to increase the beam rate capability of the linear gas stopper for medium-to-heavy-mass rare isotopes by more than tenfold compared to the currently most effective gas stopper in operation, and to improve the purity of the delivered beams. Project Description: The existing technology employed in gas stopping devices designed for low-energy, rare-isotope beams presents limitations in both the purity of extracted beams and the intensities of injected beams. These limitations are incompatible with the requirements of the recently commissioned rare isotope beam facility, FRIB. Our research and development efforts, aligned with the previously outlined objectives, focused on addressing the most critical aspects for enhancing beam-rate capability and purity. Specifically, advanced particle-in-cell simulations were developed and integrated into a simulation pipeline to explore the efficacy of multi-layer RF carpets on increasing ion transport efficiency with high incoming beam rates that generate space charge fields which can limit it. We also explored the possibility of using a collision-induced-dissociation (CID) gas cell to break up molecular contaminant ions that are generated during the stopping process. A prototype CID gas cell was constructed and tested with beams from an offline ion source, validating the concept with the successful demonstration of breaking of molecular ions. The outcome of this research enabled the formulation a conceptual design for a next-generation linear gas stopping device specifically tailored for FRIB. This device is envisioned to deliver rare-isotope-ion beams at a rate of 10 8 particles per second or higher, accompanied by advancements in purity. Methods employed: This project leverages advancements in technologies initially designed for the Advanced Cryogenic Gas Stopper (ACGS), the current state-of-the-art linear gas stopper, through the use of new simulations and beam purification via collision-induced-dissociation. The methods include: 1. Development of a prototype low-energy, low-pressure CID gas stopper. This prototype features a thin, approximately 20 nm, Si 3 N 4 entrance window designed for dissociating stable and rare-isotope molecular ions. The goal is to enhance beam purification and overall efficiency. 2. Creation of Particle-in-cell (PIC) simulations to assess the advantages of multi-layer RF carpets and multi-point extraction for ion transport efficiency. These simulations rely on the 3DCylPIC package, specifically designed for studying devices of this nature. The goal is to quantify and mitigate ion transport losses due to space charge generated in the stopping process of large numbers of ions. 3. Perform ion transport simulations across an RF carpet using an 8-phase travelling wave and evaluate its performance. Compared to the 4-phase RF carpets used in ACGS, the 8-phase carpets will double the wavelength of the generated traveling wave allowing for larger maximum RF amplitudes that could result in improved ion transport efficiency for high-intensity incoming beams when large space charge fields are present. Impact: Tackling the primary challenges associated with transforming high-energy projectile fragment beams into low-energy beams—specifically, addressing efficiency and purity—holds significant promise for advancing FRIB science. This advancement will particularly impact precision mass measurements, laser spectroscopy of short-lived nuclei, and studies in astrophysics and nuclear reactions using reaccelerated beams. These domains play a crucial role in addressing key questions outlined in the 2023 NSAC long-range plan, spanning nuclear structure, nuclear astrophysics, and fundamental symmetries. Additionally, they contribute to addressing 10 out of the 17 benchmarks identified by the NRC RISAC. The development of a next-generation gas stopping device capable of delivering low-energy, rare-isotope beams at a rate of 10 8 particles per second, or more, with high purity holds the potential to unlock experiments that would otherwise be unfeasible. Furthermore, it is expected to reduce the time required for experiments at FRIB, thereby maximizing scientific output. The research and development activities performed as part of this project bolstered essential competencies at FRIB in beam physics and ion source technologies, provided valuable training opportunities for junior scientists.
Diatom influence on the production characteristics of hydrate-bearing sediments: Examples from Ulleung Basin, offshore South Korea
The Ulleung Basin Gas Hydrate field expeditions in 2007 (UBGH1) and 2010 (UBGH2) sought to assess the Basin's gas hydrate resource potential. Coring operations in both expeditions recovered evidence of gas hydrate, primarily as fracture-filling (or vein type) morphologies in mainly silt-sized, fine-grained sediment, but also as pore-occupying hydrate in the coarser-grained layers of interbedded sand and fine-grained systems. A commonality across many of these occurrences is the presence of diatoms in the fine-grained sediment. Here we tested fine-grained sediment (median grain size <12.5 μm) associated with hydrate occurrences at four UBGH2 sites (UBGH2-2-2, UBGH2-3, UBGH2-6 and UBGH2-11) to investigate potential impacts of diatoms on efforts to extract methane from hydrate, or to tap hydrocarbon reservoirs beneath hydrate-bearing sediment. Two key considerations are: the extent to which diatoms control sediment mechanical properties, and the extent to which pore-water freshening, which occurs as gas hydrate breaks down during resource extraction, alters the diatom control on sediment mechanical properties. We conducted experiments to measure sediment index properties, sedimentation behavior and compressibility to address these considerations. We relied on scanning electron microscope (SEM) imagery and X-ray powder diffraction (XRD) to characterize the sediment mineralogy. Our high-level findings are that at the ~20–45% (by volume) diatom concentrations observed at these UBGH2 sites, sediment compressibility increases with diatom content, but diatoms only appear to increase porosity and permeability at the highest diatom concentration (~45%). Our measurements suggest in situ compression indices of 0.35–0.55 and permeabilities on the order of 0.01milliDarcies (1 × 10 -17 m 2 ) can be anticipated at these sites. Importantly, these properties are not expected to vary significantly upon pore water freshening that accompanies gas hydrate dissociation during production.
Dissociative electron attachment studies of gas-phase acetic acid using a velocity map imaging technique
Abstract Advancing instrumentation to explore dissociative electron attachment (DEA) studies allows previously unattainable information to be acquired. Using a newly constructed velocity map imaging spectrometer, we revisited a study on DEA to gas-phase acetic acid. We discuss possible fragmentation channels and compared the corresponding ion yields with previous high electron-energy resolution results. We focus on the channels occurring at higher energies, particularly near 10 eV, and calculate their thermodynamic thresholds. Moreover, we expand previous studies and perform time-sliced imaging near the 10 eV resonance to obtain the kinetic energy distribution of the fragment ions.