Search NASA⌕ Search

SEARCH · Search NASA

Results for “GAS TRACK DETECTORS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

A Cylindrical GEM Detector with Analog Readout for the BESIII Experiment

Inner Trackers (IT) are key detectors in Particle Physics experiments; excellent spatial resolution, radiation transparency and hardness, and operability under high occupancies are main requirements. We aim to design, build and commission by 2017 a Cylindrical GEM (CGEM) detector candidate to be the new IT of the BESIII spectrometer, hosted on BEPC2 in IHEP, Beijing; BESIII data taking will last until at least 2020. The IT itself will represent an evolution w.r.t. the state of the art of GEM detectors, since the use of new kind of mechanical supports for the GEM foils will reduce the total radiation length of the detector and improve its tracking performance; an innovative design of the CGEM anode will allow for smaller capacitance and hence for bigger signals. The relatively strong BESIII magnetic field requires a new analogue readout; full custom front-end electronics, including a dedicated ASIC, will be designed and produced for optimal data collection. Prototype Beam Test results showing the measurement of the spatial resolution in a 1 Tesla magnetic field will be presented among with the mechanical design and simulations. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Reduction of ion backflow using a quadruple GEM detector with various gas mixtures

In gaseous tracking detectors with a large gaseous volume, like Time Projection Chambers (TPC), multiple layers of Gas Electron Multipliers (GEM) can be used to block positive ions from flowing back into the active volume, which is detrimental to the tracking performance. TPCs with multilayer GEM readout are used in the recently upgraded ALICE experiment, and in the upcoming sPHENIX experiment. In both cases, suppression of ion backflow (IBF) is important for achieving the desired detector performance. Here, we report on studies of effective gain, IBF, and energy resolution in quadruple GEM detectors, and on strategies for minimizing IBF by optimizing the operating voltages of the individual GEM layers and the potential differences between different layers. These studies are performed as baseline measurements intended to aid in the optimization of the operating conditions of the GEMs of the sPHENIX TPC.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Additive Manufacturing Materials Study for Gaseous Radiation Detection

Additive manufacturing (AM) techniques may lead to improvements in many areas of radiation detector construction; notably the rapid manufacturing time allows for a reduced time between prototype iterations. The additive nature of the technique results in a granular microstructure which may be permeable to ingress by atmospheric gases and make it unsuitable for gaseous radiation detector development. In this study we consider the application of AM to the construction of enclosures and frames for wire-based gaseous radiation tracking detectors. We have focussed on oxygen impurity ingress as a measure of the permeability of the enclosure, and the gas charging and discharging curves of several simplistic enclosure shapes are reported. A prototype wire-frame is also presented to examine structural strength and positional accuracy of an AM produced frame. We lastly discuss the implications of this study for AM based radiation detection technology as a diagnostic tool for incident response scenarios, such as the interrogation of a suspect radiation-emitting package. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Construction and Design of a full size sTGC prototype for the ATLAS New Small Wheel upgrade

For the forthcoming Phase-I upgrade to the LHC (2018/19), the first station of the ATLAS muon end-cap system, Small Wheel, will need to be replaced. The New Small Wheel (NSW) will have to operate in a high background radiation region while reconstructing muon tracks with high precision as well as furnishing information for the Level-1 trigger. In particular, the precision reconstruction of tracks requires a spatial resolution of about 100 μm, and the Level-1 trigger track segments have to be reconstructed with an angular resolution of approximately 1 mrad. The NSW will have two chamber technologies, one primarily devoted to the Level-1 trigger function the small-strip Thin Gap Chambers (sTGC) and one dedicated to precision tracking, Micromegas detectors, (MM). The single sTGC planes of a quadruplet consists of an anode layer of 50 μm gold plated tungsten wire sandwiched between two resistive cathode layers. Behind one of the resistive cathode layers, a PCB with precise machined strips (thus the name sTGC's) spaced every 3.2 mm allows to achieve the position resolution that ranges from 70 to 150 μm, depending on the incident particle angle. Behind the second cathode, a PCB that contains an arrangement of pads, allows for a fast coincidence between successive sTGC layers to tag the passage of a track and reads only the corresponding strips for triggering. To be able to profit from the high accuracy of each of the sTGC planes for trigger purposes, their relative geometrical position between planes has to be controlled to within a precision of about 40 μm in their parallelism, as well (due to the various incident angles), to within a precision of 80 μm in the relative distance between the planes to achieve the overall angular resolution of 1 mrad. The needed accuracy in the position and parallelism of the strips is achieved by machining brass inserts together when machining the strip patterns into the cathode boards in a single step. The inserts can then be used as external references on a granite table. Precision methods are used to maintain high accuracy when combining four single detector gaps first into two doublets and then into a quadruplet. We will present results on the ongoing construction of full size (∼1 x 1 m) sTGC quadruplet prototypes before full construction starts in 2015. (authors)

43 PARTICLE ACCELERATORS↗

Searching for Dark Matter with a Bubble Chamber

The Chicagoland Observatory for Underground Particle Physics (COUPP) recently reported first Physics results from an engineering prototype dark matter detector consisting of a 1 liter, room temperature, heavy liquid bubble chamber. These results close the last open window in low mass spin dependent WIMP scattering for a conventional WIMP interpretation of the DAMA annual modulation signal. I will discuss these results and the detector techniques which enabled them.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A micromegas detector for {sup 222}Rn emanations measurements

The {sup 222}Rn emanation has significant contribution in the overall background for rare event searches experiments. In order to measure this emanations a high sensitivity detector has been designed. The detection method is based on the electrostatic collection of the {sup 222}Rn daughters on a Micromegas detector. Using a chamber with a volume of 21.2 l for the collection of {sup 218}Po and {sup 214}Po progeny of {sup 222}Rn and a 12 × 12cm{sup 2} pixelized Micromegas for the α detection. The advantages of the Micromegas detectors are the low intrinsic radioactivity and the track reconstruction of the α’s, having excellent capabilities for event discrimination.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Characterization of a 2D soft x-ray tomography camera with discrimination in energy bands

A gas detector with a 2D pixel readout is proposed for a future soft x-ray (SXR) tomography with discrimination in energy bands separately per pixel. The detector has three gas electron multiplier foils for the electron amplification and it offers the advantage, compared with the single stage, to be less sensitive to neutrons and gammas. The energy resolution and the detection efficiency of the detector have been accurately studied in the laboratory with continuous SXR spectra produced by an electronic tube and line emissions produced by fluorescence (K, Fe, and Mo) in the range of 3-17 keV. The front-end electronics, working in photon counting mode with a selectable threshold for pulse discrimination, is optimized for high rates. The distribution of the pulse amplitude has been indirectly derived by means of scans of the threshold. Scans in detector gain have also been performed to assess the capability of selecting different energy ranges.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Measurements of cosmic-ray correlated events at the Soudan underground laboratory

The ceiling and walls of the Low Background Facility at the Soudan Underground Laboratory are lined proportional tubes which form a 30 m × 17 m ×12 m muon tracker. The data acquisition records GPS-generated time stamps along with position information. The tracker is a refurbished version of the Soudan 2 proton-decay muon veto shield. It can now be used in conjunction with other experiments housed within its walls. Particularly interesting is the possible measurement of cavern muons coincident with high-energy neutron detections in the Neutron Multiplicity Meter (NMM), a 4-tonne gadolinium-loaded water Cherenkov neutron capture detector atop a 20-kilotonne lead target. Here we cover the ability of the shield and co-located detectors to achieve coincident timing resolutions of about 1 microsecond via GPS-synchronized absolute timing electronics. The usage of such technology for constraining muon-neutron correlations underground is discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Low-background tracker development for SuperNEMO

The SuperNEMO experiment will search for neutrinoless double beta decay (0νββ) with a target sensitivity of T{sub 1/2}(0ν) > 10{sup 26} years, corresponding to an effective neutrino mass of 50-100 meV. At its heart there is a low-background gaseous tracking detector which allows for extremely efficient background rejection and, if 0νββ is observed, may provide important insights into the mechanism via which it may be mediated. Radon inside the tracker, which can mimic rare ββ events, is one of the most dangerous backgrounds for SuperNEMO. To reach the target sensitivity the radon concentration inside the tracking volume must be < 0.15 mBq/m{sup 3}. To reach this challengingly-low level of radon, a considerable program of R and D has been undertaken. This includes automation of the tracker-wiring process, development of a dedicated setup to measure radon diffusion and a 'radon concentration line' which will be able to measure levels of radon in the μBq/m{sup 3} range.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Using Neutrino Nucleus Interactions as a Probe of the Strong Interaction

Neutrino scattering experiments have been studying QCD for over 30 years. From the Gargamelle experiments in the early 70's, through the subsequent bubble chamber and electronic detector experiments in the 80's and 90's, neutrino scattering experiments have steadily accumulated increasing statistics and minimized their systematic errors. An example of the more recent studies of QCD with neutrinos is from the TeVatron neutrino beam--the NuTeV {nu}-Fe experiment. The problem the community faces in trying to study QCD with modern neutrino data is that there is no experimentally verified way to scale neutrino-nucleus (for example, Fe) results to the equivalent neutrino-nucleon values making it difficult to combine neutrino nucleus scattering data with charged-lepton nucleus and nucleon scattering data in QCD global fits to extract parton distribution functions. This is particularly crucial since there is now indications that nuclear effects in neutrino nucleus interactions are different than those measured in charged-lepton nucleus scattering. To better understand this situation, the MINER{nu}A neutrino-nucleus scattering experiment at Fermilab, a collaboration of elementary-particle and nuclear physicists, is systematically studying neutrino nuclear effects off of He, C, Fe and Pb for a more thorough A-dependent study of nuclear PDFs and these correction factors.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Using Neutrinos as a Probe of the High-x{sub Bj} Region

Neutrino scattering experiments have been studying the DIS region, including high-x{sub Bj}, for over 40 years. From the Gargamelle experiments in the early 70's, through the subsequent bubble chamber and electronic detector experiments neutrino scattering experiments have steadily accumulated increasing statistics and minimized their systematic errors. Recent completed studies of high-x{sub Bj} with neutrinos are from the the NuTeV experiment off Fe in the TeVatron neutrino beam and both the CHORUS experiment off Pb and the NOMAD experiment off C/Al in the CERN neutrino beam. The significant factor here is that all recent high-statistics neutrino experiments have been off high-A nucleus targets. The unknown nuclear effects mask the high-x{sub Bj} behavior of the bare neutrino-nucleon interaction. In order to address this problem, current on-going studies have shifted to the Main Injector based NuMI facility at Fermilab and the MINER{nu}A experiment. This experiment is a collaboration of elementary-particle and nuclear physicists planning to measure absolute exclusive and inclusive cross-sections and nuclear effects in {nu}- A interactions as well as a systematic study of the resonance-DIS transition region and DIS with an emphasis on the extraction of high-xBj parton distribution functions. The MINER{nu}A experiment also plans to propose the use of a liquid hydrogen target to go after a measurement of d/u quarks at high-x{sub Bj}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

The CLAS12 Forward Tagger

This document presents the technical layout and the performance of the CLAS12 Forward Tagger (FT). The FT, composed of an electromagnetic calorimeter based on PbWO$_4$ crystals (FT-Cal), a scintillation hodoscope (FT-Hodo), and several layers of Micromegas trackers (FT-Trk), has been designed to detect electrons and photons scattered at polar angles from 2$^\circ$ to 5$^\circ$ and to meet the physics goals of the hadron spectroscopy program and other experiments running with the CLAS12 spectrometer in Hall B.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High density conics in a magnetically expanding helicon plasma

A two-dimensional mapping of ion density and plasma potential in a diverging magnetized low pressure (0.4 mTorr) carbon dioxide helicon plasma containing a double layer reveals the presence of high density conics (approx7x10{sup 9} cm{sup -3}) along the most diverging magnetic field lines exiting the helicon source and connecting with the grounded expansion chamber. The density in the conic is about 30% greater than the density at the double layer and this results from local ionization associated with the presence of a high energy tail in the electron energy probability function. The plasma potential along the conic is constant at about 30 V.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analyses of Transverse Momentum Spectra of Baryon Resonances in C+C Collisions at 4.2 A GeV/c

The production of Delta baryon resonances in heavy ion C+C collisions, using a 2-m propane bubble chamber exposed to beams of light relativistic nuclei from the Dubna synchrophasotron, has been investigated. The transverse momentum spectra of Delta baryon resonances have been measured and analyzed within a simple thermodynamical collective flow model and a boundary model. The goal was to find a simple, but realistic parameterization of the freeze-out stage in these collisions. As typical freeze-out parameters temperature T and beta have been obtained from the collective flow and temperature T from the boundary model.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Neutrino induced coherent pion production

We discuss different parameterizations of the C{sub 5}{sup A}(q{sup 2}) NDELTA form factor, fitted to the old Argonne bubble chamber data for pion production by neutrinos, and we use coherent pion production to test their low q{sup 2} behavior. We find moderate effects that will be difficult to observe with the accuracy of present experiments. We also discuss the use of the Rein-Sehgal model for low energy coherent pion production. By comparison to a microscopic calculation, we show the weaknesses some of the approximations in that model that lead to very large cross sections as well as to the wrong shapes for differential ones. Finally we show that models based on the partial conservation of the axial current hypothesis are not fully reliable for differential cross sections that depend on the angle formed by the pion and the incident neutrino.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Plane and hemispherical potential structures in magnetically expanding plasmas

Two-dimensional potential structures are measured for different gas pressure in expanding argon plasma using permanent magnets, where the magnetic field is about 100 G in the source and several gauss in the diffusion chamber. The plane potential drop is observed near the source exit for 0.35 mTorr, while the potential structure becomes hemispherical when increasing up to 1 mTorr; the hemispherical structure results in the radial divergence of the ion beam. It is found that the trajectories of the accelerated ions and the electrons overcoming the potential drop are dominated by the potential structure and magnetic-field lines, respectively.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Study of a Narrow {pi}{sup +{pi}-} Peak at about 755 MeV/c{sup 2} in p-barn{yields}2{pi}{sup +}3{pi}{sup -} Annihilation at Rest

A narrow peak in the {pi}{sup +{pi}-} mass distribution was seen by the Rome-Syracuse Collaboration in p-barn{yields}2{pi}{sup +}3{pi}{sup -} annihilation at rest in 1970. It was ignored for 40 years. The reanalysis of this peak finds that it has the mass 757.4{+-}2.8{sub stat{+-}}1.2{sub sys} MeV/c{sup 2} and a width consistent with the experimental resolution. The evidence of the peak is 5.2 standard deviations. The peak is generated in (1.03{+-}0.21{sub stat{+-}}0.21{sub sys})% of the p-barn annihilations at rest. No spin analysis is possible with the statistics of the experiment but there are arguments suggesting that it has J{sup p} = 0{sup +}.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗