Search NASA⌕ Search

SEARCH · Search NASA

Results for “GLOW CURVE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Preliminary Thermoluminescent Dosimeter Glow Curve Analysis with Automated Glow Peak Identification for LiF Mg,Ti

When appropriately analyzed, thermoluminescent dosimeter glow curve analysis allows for improved quantification of thermoluminescent material behavior while flagging abnormalities. The mathematical separation of a glow curve into contributions from energetically unique trap states, or glow curve analysis, may be used to remove undesired effects of signal fading for complex materials. A generalized glow curve analysis software for the separation of glow curves is presented in this paper. Written in C ++ , the software uses the first-order kinetics model with automatic peak identification. The automatic identification of peaks is achieved through a unique peak-finding algorithm. Here, the program was performance tested using experimental glow curve data from LiF:Mg,Ti, and comparative results are presented.

47 OTHER INSTRUMENTATION↗

Thermoluminescence glow curve analysis and CGCD method for erbium doped CaZrO{sub 3} phosphor

The manuscript report the synthesis, thermoluminescence study at fixed concentration of Er{sup 3+} (1 mol%) doped CaZrO{sub 3} phosphor. The phosphors were prepared by modified solid state reaction method. The powder sample was characterized by thermoluminescence (TL) glow curve analysis. In TL glow curve the optimized concentration in 1mol% for UV irradiated sample. The kinetic parameters were calculated by computerized glow curve deconvolution (CGCD) techniaue. Trapping parameters gives the information of dosimetry loss in prepared phosphor and its usability in environmental monitoring and for personal monitoring. CGCD is the advance tool for analysis of complicated TL glow curves.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermoluminescence and glow curves analysis of γ-exposed Eu{sup 3+} doped K{sub 3}Y(PO{sub 4}){sub 2} nanophosphors

Highlights: • First time, a detailed comparative study of the glow curves and kinetic parameters was made on K{sub 3}Y(PO{sub 4}){sub 2} nanophosphor. • Combustion method was employed to synthesize the Eu{sup 3+} doped K{sub 3}Y(PO{sub 4}){sub 2} nanophosphor. • The nanophosphor exhibited sublinear response suggesting that it is suitable for TL dosimetry. - Abstract: Eu{sup 3+} doped K{sub 3}Y(PO{sub 4}){sub 2} nanophosphor was synthesized by combustion synthesis using urea as a fuel. The crystal structure and particle morphology of the nanophosphor were investigated by using X-ray diffraction and transmission electron microscopy, respectively. A Thermoluminescence (TL) study was carried out after exposing the samples to gamma radiation. The TL glow curves exhibited a prominent peak at 407 K and a small hump at 478 K. The intensity of the peaks increased with the increase in the dose of the gamma rays (0.01–5 kGy). The K{sub 3}Y(PO{sub 4}){sub 2}: Eu{sup 3+} (2.5 mol%) nanophosphor exhibited sublinear TL response to γ-radiation over a wide range of gamma doses (0.01–5 kGy). The TLanal program was used to analyze the glow curves of the K{sub 3}Y(PO{sub 4}){sub 2} nanophosphor at different doses (0.2–5 kGy) and different heating rates (3–10 K/s). A comparative study was done for kinetic trapping parameters that were determined by the peak shape methods of Chen, Grossweiner and Lushchik. The frequency factors (s) for each glow peak were also calculated. The values of the activation energy (E) obtained by the TLanal program were in good agreement with those obtained by the peak shape methods. The effect of different amount of doses and different heating rates are discussed.

36 MATERIALS SCIENCE↗

SU-E-T-354: Peak Temperature Ratio of TLD Glow Curves to Investigate the Spatial Dependence of LET in a Clinical Proton Beam

Purpose: Use the ratio of the two high temperature peaks (HTR) in TLD 700 glow curves to investigate spatial dependence of the linear energy transfer (LET) in proton beams. Studies show that the relative biological effectiveness (RBE) depends upon the physical dose as well as its spatial distribution. Although proton therapy uses a spatially invariant RBE of 1.1, studies suggest that the RBE increases in the distal edge of a spread out Bragg peak (SOBP) due to the increased LET. Methods: Glow curve studies in TLD 700 show that the 280 C temperature peak is more sensitive to LET radiation than the 210 C temperature peak. Therefore, the areas under the individual temperature peaks for TLDs irradiated in a proton beam normalized to the peak ratio for 6 MV photons are used to determine the HTR to obtain information on its LET. TLD 700 chips with dimensions 0.31×0.31×0.038 cc are irradiated with 90 MeV protons at varying depths in a specially designed blue wax phantom to investigate LET spatial dependence. Results: Five TLDs were placed at five different depths of the percent depth dose curve (PDD) of range 16.2 cm: center of the SOPB and approximately at the 99% distal edge, 90%, 75% and 25% of the PDD, respectively. HTR was 1.3 at the center of the SOBP and varied from 2.2 to 3.9 which can be related to an LET variation from 0.5 to 18 KeV/μ via calibration with radiation beams of varying LET. Conclusion: HTR data show a spatially invariant LET slightly greater than the 6 MV radiations in the SOBP, but a rapidly increasing LET at the end of the proton range. These results indicate a spatial variation in RBE with potential treatment consequences when selecting treatment margins to minimize the uncertainties in proton RBE.

07 ISOTOPE AND RADIATION SOURCES↗

Thermoluminescence (TL) Analysis and Fading Studies of Naturally Occurring Salt Irradiated by 500 mGy Gamma Rays

The aim of the present study was to investigate the potential of the naturally occurring salt for the dosimetry purposes, using TL. The fine powder samples (20 mg) were irradiated by {gamma}- rays from 500 mGy to 2500 mGy by using Theratron-780C Cobalt-60 source, however, this paper discusses about 500 mGy only. The TL glow curve peak parameters were studied by using Chen's peak shape equation. TL glow curves were compared with fitted curves using glow curve deconvolution (GCD) method by using Kitis expression. The kinetic parameter values (E, b and s) so calculated, are in good agreement with those available in literature. The calculated energy values were also verified by using various heating rate (VHR) method. {chi}{sup 2} test and figure of merit (FOM) calculation was done to accept the goodness of fit between the curves. Fading studies of the sample showed a good fitting between the curves. The analysis suggests that natural salt should be considered for dosimetry purposes.

36 MATERIALS SCIENCE↗

Investigation of thermoluminescence and kinetic parameters of CaMgB{sub 2}O{sub 5}: Dy{sup 3+} nanophosphor

In this paper, thermoluminescence (TL) properties of Dy{sup 3+} (1.5 mol %) doped CaMgB{sub 2}O{sub 5} nanophosphor after being exposed to ultraviolet (UV) radiations (λ=254nm) were investigated. In UV exposed samples, the thermoluminescence glow curve consists of a broad glow peak located at 380 K with a small shoulder at 507 K. A shift in glow peak temperature from 367 K to 380 K after the UV exposure for 80 min was observed, which clearly shows that glow peaks follow the second order kinetics. The TL intensity of the peaks increases with an increase in the exposure time of UV rays (10-180 min). The TL Anal program was used to analyze the glow curve. The kinetic parameters such as activation energy (E), the frequency factor (s) and the order of kinetics (b) were calculated for CaMgB{sub 2}O{sub 5}: Dy{sup 3+} nanophosphors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and thermoluminescence studies of γ-irradiated Dy{sup 3+} doped SrGd{sub 2}O{sub 4} phosphor

Highlights: • SrGd2O4:Dy3+ phosphors have been prepared via homogeneous precipitation cum auto-combustion method for the first time. • TL characteristics of γ-irradiated SrGd2O4: Dy3+ phosphors were studied for various Dy3+ contents and heating rates. • Linear TL profile, less fading and high reproducibility of the present phosphor system reveals its applicability in TL dosimetry. - Abstract: Dy{sup 3+} doped SrGd{sub 2}O{sub 4} phosphors were synthesized via homogeneous precipitation cum auto-combustion method for the first time. Orthorhombic phase formation and granular morphology of SrGd{sub 2}O{sub 4}: Dy{sup 3+} samples were investigated through X-ray diffraction (XRD) and microscopic studies. Thermoluminescence (TL) characteristics of SrGd{sub 2}O{sub 4}: Dy{sup 3+} phosphors were taken after exposure of {sup 60}Co γ-rays. The TL glow curve of as-prepared phosphors was well-resolved into five peaks 114 °C, 161 °C, 198 °C, 248 °C, and 293 °C by using computerized glow curve deconvolution program. The effect of impurity (Dy{sup 3+}) contents and heating rates for the TL glow curves were also studied. The linear behaviour of as-formed SrGd{sub 2}O{sub 4}: Dy{sup 3+} samples are observed within a wide range of dose of 80 Gy–2 kGy. Fading characteristics of SrGd{sub 2}O{sub 4}: Dy{sup 3+} phosphor was studied over the duration of 30 days. A comparative study was done to estimate different trapping parameters by employing Chen’s peak shape method and CGCD simulation of TL glow curves.

36 MATERIALS SCIENCE↗

Thermoluminescence studies of solid-state reaction derived and γ-irradiated SrGd{sub 2}O{sub 4}: Eu{sup 3+} phosphor

Graphical abstract: Effect of heating rates on TL glow curve for SrGd2O4: Eu3+ doped samples exposed with 3 kGy gamma dose. - Highlights: • SrGd{sub 2}O{sub 4}: Eu{sup 3+} phosphors have been prepared by solid-state reaction method. • The TL properties of γ-irradiated SrGd{sub 2}O{sub 4}: Eu{sup 3+} phosphors were studied in detail. • Linear dose response, less fading and high reusability of SrGd{sub 2}O{sub 4}:Eu{sup 3+} phosphors unfold its applicability as TL dosimeters. - Abstract: Eu{sup 3+} activated SrGd{sub 2}O{sub 4} phosphors were synthesized by conventional high-temperature solid-state reaction method in air ambiance. The structural and thermoluminescence (TL) aspects of as-prepared phosphors were explored by XRD, FESEM, TEM and TL techniques. Orthorhombic phase formation and agglomerated ginger-like morphology of as-synthesized SrGd{sub 2}O{sub 4}: Eu{sup 3+} samples were unfolded by X-ray diffraction (XRD) and microscopic studies, respectively. The effect of impurity (Eu{sup 3+}) contents and heating rates for the TL glow curves was also studied. The TL glow curve of γ-irradiated SrGd{sub 2}O{sub 4}: Eu{sup 3+} shows two well-resolved peaks at 393 K and 598 K with a shoulder at 537 K. The Linear behaviour of as-formed SrGd{sub 2}O{sub 4}: Eu{sup 3+} samples are observed in the dose range 500 Gy–3 kGy. The different trapping parameters were calculated by employing computerized glow curve deconvolution (CGCD) methods Linear dose response, less fading and high reproducibility of SrGd{sub 2}O{sub 4}: Eu{sup 3+} samples broadly indicated its suitability for TL dosimetry applications.

36 MATERIALS SCIENCE↗

TL/OSL properties of beta irradiated Al2O3:Tm3+ phosphor synthesized by microwave combustion method

Highlights: • TL emission spectra of γ – rayed Al{sub 2}O{sub 3}:Tm{sup 3+} shows Tm{sup 3+} characteristic transitions. • Doping of Tm{sup 3+} ions causes enhancement of TL/OSL. • TL/OSL kinetic parameters are analyzed by CGCD method. • TL mechanism of γ/β – rayed Al{sub 2}O{sub 3}:Tm{sup 3+} was proposed. • TL/OSL dosimetric properties of Al{sub 2}O{sub 3}:Tm{sup 3+} suggests that the material is appropriate for medical dosimetry. - Abstract: This work discusses synthesis of stable α-phase of Al{sub 2}O{sub 3}:Tm{sup 3+} by combustion method using temperature controlled microwave oven. The crystalline phase was analyzed by X-ray diffraction (XRD) technique and average crystallite size was found to be 147 nm. Observations using scanning electron microscope (SEM) image suggest formation of agglomerated particles and energy dispersive x-ray spectroscopy (EDS) confirmed the incorporation of Tm{sup 3+} in Al{sub 2}O{sub 3}. Thermoluminescence emission (TLE) spectrum of γ – irradiated Al{sub 2}O{sub 3}:Tm{sup 3+} shows characteristic emissions of Tm{sup 3+}, Cr{sup 3+} and Mn{sup 4+}. TL glow curves of γ – irradiated Al{sub 2}O{sub 3}:Tm{sup 3+} exhibit a prominent peak at 453 K along with a shoulder at 496 K. The glow curves of β – irradiated Al{sub 2}O{sub 3}:Tm{sup 3+} were studied in different emission regions using U340 + BG39 (UV band pass), CS759 + BG39 (Blue band pass) and BG39 (Visible band pass) optical glass filters. A prominent peak was observed at 471 K in for all mentioned emission regions and an additional shoulder was observed at 511 K with CS759 + BG39 and BG39 filters. TL glow curve of β – irradiated Al{sub 2}O{sub 3}:Tm{sup 3+} using only BG39 filter had more counts than CS759 + BG39 and U340 + BG39 filters. Further, the effect of Tm{sup 3+} impurity on TL response was studied. TL kinetic parameters were estimated by using computerized glow curve deconvolution (CGCD) technique. The activation energy and frequency factor of prominent peak (471 K) were found to be 1.31 eV and 3.50 × 10{sup 13} s{sup −1} respectively. Optically stimulated luminescence (OSL) characteristics of β – irradiated Al{sub 2}O{sub 3}:Tm{sup 3+} were studied using U340 + BG39 and CS759 + BG39 filters. Highest OSL intensity was observed in UV. OSL curves were deconvoluted by general order decay equation. Life time and photoionization cross section of the traps responsible for OSL were found to be 5.30 s and 3.98 × 10{sup −18} cm{sup 2} respectively. The process of ionization of electron from Tm{sup 3+}, electron trap in host lattice and its recombination mechanism is proposed. Phosphorescence decay of beta irradiated sample was also studied. The lifetime of phosphorescence decay was found to be 140 s for the prominent peak and TL intensity decays 25% after the phosphorescence. TL/OSL dosimetric properties viz. linearity with dose, reusability and minimum detectable dose of the phosphor were characterized for medical dosimetry application.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Intrinsic dosimetry of glass containers: A potential interrogation tool for nuclear forensics and waste management

Intrinsic dosimetry is the method of measuring total absorbed dose received by the walls of a container holding radioactive material. By considering the total absorbed dose received by a container in tandem with the physical characteristics of the radioactive material housed within that container, this method has the potential to provide law enforcement officials or waste management personnel with enhanced pathway information regarding the history of the container and its radioactive contents. We report the latest in a series of experiments designed to validate and demonstrate this newly developed tool. Thermoluminescence (TL) dosimetry was used to measure dose effects on the raw stock material of borosilicate container glass with time up to 60 days after gamma ray, x-ray, beta particle or ultraviolet irradiations at doses from 0.15 to 20 Gy. Two peaks were identified in the TL glow curve when irradiated with 60Co, a relatively unstable peak around 120°C and a more stable peak around 225°C. Signal strength of both peaks decayed with time. The minimum measurable dose using this technique was measured to be 0.15 Gy, which is roughly equivalent to a 24 hr irradiation at 1 cm from a 50 ng source of 60Co. After fading, this dose would still be observable approximately 1 year post-irradiation. Similar doses with beta particles and x-rays produced TL glow curves of lower intensity. The TL glow curves were separated into five peaks centered at approximately 120, 160, 225, 300, and 340°C. Differences in TL glow curve shape and intensity were observed for the glasses from different geographical origins. These differences can be explained by changes in the intensities of the five peaks. EPR results showed production of BOHC and E’ silica centers.

Clark, Richard A.↗

Implementation of Stochastic Gradient Descent in an Automated Glow Peak Identification Software for Multiple Thermoluminescent Dosimeter Types

A glow-curve analysis code was previously developed in C++ to analyze thermoluminescent dosimeter glow curves using automated peak detection while applying a first-order kinetics model. A newer version of this code was implemented to improve the automated peak detection and curve fitting models. The Stochastic Gradient Descent Algorithm was introduced to replace the prior approach of taking first and second-order derivatives for peak detection. Additionally, early stopping mechanisms were invoked to improve the previously used Levenberg-Marquardt Algorithm employed for curve fitting. The two software versions were compared through glow curve analysis of different thermoluminescent dosimeter materials and calculation of the corresponding figures of merit. Altogether improvements were shown, namely an increase in the number of peaks detected and a reduction of the mean figure of merit by approximately 46%.

137Cs↗

Thermoluminescent dosimeter measurements and analysis for LDEF experiment M0006

Glow curve measurements are reported up to 600 C of (Thermoluminescent Dosimeter Measurement) TLD-100 (LiF) samples deployed on Long Duration Exposure Facility (LDEF) and retained as ground control. Lab exposure simulations are also reported with Co-60 radiation, low energy light ions and high energy protons in an effort to replicate the glow curves, especially the high temperature peaks observed in the LDEF TLD specimens. The evidence to date clearly shows the effect of inflight anneal on the low temperature part of the glow curve. It also shows that the high temperature part of the glow curve appears due to ion dose deposition. Initial correlations between high temperature glow peaks and effective LET of the registered dose is given.

Stauber, Michael C.↗

Nanocrystalline Ba{sub 0.97}Ca{sub 0.03}SO{sub 4}:Eu for ion beams dosimetry

Nanoparticles of Ba{sub 0.97}Ca{sub 0.03}SO{sub 4}:Eu have been irradiated by 48 MeV Li{sup 3+}, 75 MeV C{sup 6+}, and 90 MeV O{sup 7+} ion beams with a fluence range of 1x10{sup 9}-1x10{sup 13} ion/cm{sup 2}. The thermoluminescence (TL) glow curves along with the response curves of this nanophosphor have been investigated and compared with those of the corresponding microcrystalline samples. TL glow curve of the nanophosphor exposed to {gamma}-rays has also been included in the letter with the aim of reporting some of the comparative measurements. The glow curves of the ion-beam irradiated nanomaterials are similar in their shapes to those induced by gamma rays, with a shift in the peak positions to the higher temperature side by around 30 K. The TL intensity of the ion-beam irradiated nanomaterials is found to decrease, while going from low to high atomic number (Z) ions (i.e., Li{sup 3+}{yields}O{sup 7+}). Similar trend was also observed in the linearity of the TL response curves. The response curve of Li ion irradiated nanomaterials is sublinear in the whole range of studied fluences. C ion has also a more or less similar response, while the O ion has a sublinear response over a shorter range of 1x10{sup 9}-1x10{sup 12} ion/cm{sup 2}, and above this range the response saturates. These results for the nanomaterials are much better than that of the corresponding microcrystalline sample irradiated by Li{sup 3+} ions. The curve was sublinear up to the fluence 1x10{sup 10} ion/cm{sup 2} and then saturates at higher fluences. The wider sublinear TL response of the nanocrystalline Ba{sub 0.97}Ca{sub 0.03}SO{sub 4}:Eu makes it superior to its corresponding microform and thus makes it a suitable candidate as a dosimeter to be used for detecting the doses of ions, especially the Li and C ions for their application in cancer radiotherapy and radiation biology.

36 MATERIALS SCIENCE↗

Thermoluminescence characteristics of LiF: Cu nanocrystalline phosphor

Copper (Cu) activated LiF phosphor in nanocrystalline form has been prepared by the chemical co-precipitation method for radiation dosimetry application. The formation of nanocrystalline structure has been confirmed by X-ray diffraction and Scanning electron microscopy. Cubical shaped nanostructure with average particle size of 33nm has been formed. The sample was prepared at different concentration of Cu from 0.01mol% to 3 mol%. TL properties were investigated by studying the glow curve after irradiating the phosphor to gamma ray Co{sup 60} source with dose of 15 Gy. It has been found that nanocrystalline LiF: Cu show simple glow curve structure with a single glow peak at 404 K where as commercially available phosphors exhibits multi peak complex glow curve structure. The effect of different normality on the TL properties of phosphor has been studied. Maximum TL intensity for LiF: Cu (0.1mol %) phosphor is observed at the normality of 0.5N and annealing temperature of 200°C. The phosphor showed good linearity up to 10 KGy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Analysis of thermoluminescent glow peaks of zoisite under beta irradiations

In this study, the thermoluminescence (TL) properties of natural crystal of zoisite were investigated after beta ({sup 90}Sr) irradiation at room temperature (RT). Zoisite, of chemical formula Ca{sub 2}Al{sub 3}(SiO{sub 4})(Si{sub 2}O{sub 7})O(OH), is found in Minas Gerais State, Brazil as natural mineral of silicate, member of the epidote group. The glow curve of a natural sample submitted to a heat treatment at 600 deg. C is composed of two broad peaks, centered at about 110-130 deg. C and another one at about 205-210 deg. C. A heating rate of 4 deg. C s{sup -1} was used in the temperature range from RT to 300 deg. C. The additive dose, T{sub m}-T{sub STOP} thermal cleaning, initial rise, variable heating rate and computerized glow curve deconvolution methods have shown that the glow curve is a superposition of six peaks at 100, 130, 155, 175, 200 and 230 deg. C. The trapping parameters for the individual peaks have been calculated. The TL dose response of 130 and 200 deg. C peaks has a linear response. Zoisite is a candidate for a TL dosimeter because of its high sensitivity.

36 MATERIALS SCIENCE↗

Synthesis and characterization of rare earth doped ZrO{sub 2} nanophosphors

In this paper, we reports synthesis, characterization and thermoluminescence (TL) glow curves of europium and dysprosium activated zirconium dioxide (ZrO{sub 2}: Eu{sup 3+}, Dy{sup 3+}) phosphor with variable concentration of europium and fixed concentration of dysprosium. The sample was prepared by the Solid state method; thereafter, the TL glow curves were recorded for different concentration of europium with 20 min UV exposure at a heating rate of 6.7°C/s. The trapping parameters for synthesized phosphors of ZrO{sub 2}: Eu{sup 3+}, Dy{sup 3+} have been calculated by using a peak shape method. The sample was characterized for structural analysis by XRD (X-ray diffraction) and morphological analysis by FEGSEM (field emission gun scanning electron microscope) and FTIR (Fourier transform infrared spectroscopy). The effect of variable europium concentration and fixed dysprosium concentration on TL studies were interpreted and the formation of trap depth and reproducibility of prepared phosphor were analyzed by TL glow curves. The peak temperature on TL less than 200°C shows the formation of deep trapping in prepared sample. The high temperature peak shows the less fading and more stability in prepared sample.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermoluminescence of nanocrystalline CaSO{sub 4}: Dy for gamma dosimetry and calculation of trapping parameters using deconvolution method

Nanorods of CaSO{sub 4}: Dy having diameter 20 nm and length 200 nm have been synthesized by the chemical coprecipitation method. These samples were irradiated with gamma radiation for the dose varying from 0.1 Gy to 50 kGy and their TL characteristics have been studied. TL dose response shows a linear behavior up to 5 kGy and further saturates with increase in the dose. A Computerized Glow Curve Deconvolution (CGCD) program was used for the analysis of TL glow curves. Trapping parameters for various peaks have been calculated by using CGCD program.

61 RADIATION PROTECTION AND DOSIMETRY↗

Photoluminescence, thermoluminescence and defect centres in Y2O3 and Y2O3:Tb3+ under 100 MeV swift Ni8+ ion beam irradiation

Highlights: • XRD showed decrease of crystallite size after ion irradiated. • Electron spin resonance reveals the presence of F, F{sup +} and O{sub 2}{sup −} centres. • SHI irradiated Y{sub 2}O{sub 3}:Tb{sup 3+} exhibits purity of intense green emission and long life time. • The Tb{sup 3+} doped Y{sub 2}O{sub 3} shows a linear, greater TL efficiency, longer life time and less fading under SHI irradiation. - Abstract: Y{sub 2}O{sub 3} and Y{sub 2}O{sub 3}:Tb{sup 3+} powders, synthesized via the solution combustion method, were studied in order to determine the effect of 100 MeV swift Ni{sup 8+} ions on the photoluminescence (PL), thermoluminescence (TL) and swift ion beam induced defects. Synthesized materials were characterized by X-ray powder diffraction, electron spin resonance, PL intensity, decay measurements and TL. Cubic structures were observed in both the pristine and ion irradiated materials. The ion irradiated materials exhibited smaller crystallite sizes than that of the pristine material. PL peaks in the visible region were identified at 485, 542, 582 and 621 nm due to the {sup 5}D{sub 4}→{sup 7}F{sub 3,4,5,6} transition of Tb{sup 3+}. The PL intensity showed an increase up to 3 × 10{sup 10} ions cm{sup −2} and then a significant decrease with a further increase in the ion fluence. The recorded time resolved PL at an ion irradiated fluence of 3 × 10{sup 10} ions cm{sup −2}, exhibited an increase in the life time of the material. TL glow curves were obtained for the samples irradiated with a swift Ni{sup 8+} ion beam. These glow curves showed a peak at 518 K with a shoulder peak at 473 K and its intensity linearly increased upto a fluence of 1 × 10{sup 11} ions cm{sup −2}. Whereas, the undoped sample showed peaks at 421 and 662 K and its intensity sub-linearly increased upto a fluence of 1 × 10{sup 11} ions {sup −2}. TL efficiency values of the Y{sub 2}O{sub 3}:Tb{sup 3+} sample, irradiated by a 100 MeV Ni{sup 8+} ion beam, have been measured relative to the undoped Y{sub 2}O{sub 3} sample and were found to be 1.34. The Tb{sup 3+} doped sample exhibited a less fading effect under the swift heavy ion beam.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗