Search NASA⌕ Search

SEARCH · Search NASA

Results for “GOLD IONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Gold Ion Beam Milled Gold Zero-Mode Waveguides

Zero-mode waveguides (ZMWs) are widely used in single molecule fluorescence microscopy for their enhancement of emitted light and the ability to study samples at physiological concentrations. ZMWs are typically produced using photo or electron beam lithography. We report a new method of ZMW production using focused ion beam (FIB) milling with gold ions. We demonstrate that ion-milled gold ZMWs with 200 nm apertures exhibit similar plasmon-enhanced fluorescence seen with ZMWs fabricated with traditional techniques such as electron beam lithography.

36 MATERIALS SCIENCE↗

Gold nanoparticle formation in diamond-like carbon using two different methods: Gold ion implantation and co-deposition of gold and carbon

We describe work in which gold nanoparticles were formed in diamond-like carbon (DLC), thereby generating a Au-DLC nanocomposite. A high-quality, hydrogen-free DLC thin film was formed by filtered vacuum arc plasma deposition, into which gold nanoparticles were introduced using two different methods. The first method was gold ion implantation into the DLC film at a number of decreasing ion energies, distributing the gold over a controllable depth range within the DLC. The second method was co-deposition of gold and carbon, using two separate vacuum arc plasma guns with suitably interleaved repetitive pulsing. Transmission electron microscope images show that the size of the gold nanoparticles obtained by ion implantation is 3-5 nm. For the Au-DLC composite obtained by co-deposition, there were two different nanoparticle sizes, most about 2 nm with some 6-7 nm. Raman spectroscopy indicates that the implanted sample contains a smaller fraction of sp{sup 3} bonding for the DLC, demonstrating that some sp{sup 3} bonds are destroyed by the gold implantation.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Dynamics of Charge States of Relativistic Gold Ion Beams Passing through Cu and Au Foils in the NICA Project

In order to study the properties of dense baryonic matter, an accelerator complex is under development at the Joint Institute for Nuclear Research (Dubna, Russia) within the new NICA project. The NICA project assumes the use of accelerated ion beams ranging from protons to gold ions with relativistic energies up to 4.5 GeV/nucleon. To design experiments, it is necessary to have information on the efficiency of the yield of bare gold nuclei formed at the passage of a gold ion beam with energies of about several hundreds of MeV per nucleon through a foil of a specialized stripping station at the output of the booster of the accelerator. In this work, the optimal conditions (material and thickness of the foil and the energy of the ion) for the formation of fractions of bare gold nuclei with a probability of 80–90% have been determined by calculating electron loss and capture cross sections, as well as the dynamics of charge states of gold ions colliding with copper and gold foils at energies of 400 and 600 MeV/nucleon,.

74 ATOMIC AND MOLECULAR PHYSICS↗

FY10 parameters for the injection, acceleration, and extraction of gold ions in booster, AGS, and RHIC

A Gold ion with charge eQ has N = 197 Nucleons, Z = 79 Protons, and (Z-Q) electrons. (Here Q is an integer and e is the charge of a single proton.) The mass is m = au - Qm{sub e} + E{sub b}/c{sup 2} (1) where a = 196.966552 is the relative atomic mass [1, 2] of the neutral Gold atom, u = 931.494013 MeV/c{sup 2} is the unified atomic mass unit [3], and m{sub e}c{sup 2} = .510998902 MeV is the electron mass [3]. E{sub b} is the binding energy of the Q electrons removed from the neutral Gold atom. This amounts to 0.332 MeV for the helium-like gold ion (Q = 77) and 0.517 MeV for the fully stripped ion. For the Au{sup 31+} ion we have E{sub b} = 13.5 keV. These numbers are given in Ref. [4].

43 PARTICLE ACCELERATORS↗

FY2019 parameters for Gold ions in Booster, AGS, and RHIC

Sections 1 through 6 of this report give parameters for low-energy gold ions circulating in RHIC at injection and in AGS at extraction. Section 7 gives parameters for Au79+ ions circulating in RHIC at the standard injection magnetic rigidity of 81.11378003 Tm . Section 8 gives parameters for medium-energy Au79+ ions circulating in RHIC at 31.2 GeV per nucleon. The standard parameters for gold ions circulating in Booster, AGS, and RHIC are documented in. For convenience they are listed here in Sections 9 through 11 . Gold ions normally come from EBIS but can be provided by Tandem if EBIS is down for maintenance or repairs. Section 12 gives parameters for Tandem Au31+ ions circulating in Booster. In order to achieve a single bunch of Tandem ions at Booster extraction, a 6 to 3 to 1 bunch merge is required. This has been developed by Keith Zeno and is documented in. Different bunch merges and ll patterns in AGS are used depending on the desired bunch intensity in RHIC and the desired number of bunches to be injected into RHIC per AGS cycle. These are illustrated in Sections 13 through 17 . The standard bunch merges done in Booster and AGS are documented in. Bucket and bunch parameters for clean injection of low-energy gold ions into RHIC are documented in. Parameters of past medium and low energy gold ion setups are documented in.

43 PARTICLE ACCELERATORS↗

FY08 parameters for the injection, acceleration, and extraction of gold ions and deuterons in the booster, AGS, and RHIC

A Gold ion with charge eQ has N = 197 Nucleons, Z = 79 Protons, and (Z-Q) electrons. (Here Q is an integer and e is the charge of a single proton.) The mass is m = au - Qm{sub e} + E{sub b}/c{sup 2} (1) where a = 196.966552 is the relative atomic mass [1, 2] of the neutral Gold atom, u = 931.494013 MeV/c{sup 2} is the unified atomic mass unit [3], and m{sub e}c{sup 2} = .510998902 MeV is the electron mass [3]. E{sub b} is the binding energy of the Q electrons removed from the neutral Gold atom. This amounts to 0.332 MeV for the helium-like gold ion (Q = 77) and 0.517 MeV for the fully stripped ion. For the Au{sup 31+} ion we have E{sub b} = 13.5 keV. These numbers are given in Ref. [4]. The deuteron mass [3] is 1875.612762(75) MeV/c{sup 2}.

43 PARTICLE ACCELERATORS↗

Bucket and bunch parameters for clean injection of low energy gold ions into RHIC

Collisions of gold nuclei in RHIC at five low energies, 3.85, 4.55, 5.75, 7.30, and 9.80 GeV per nucleon, are planned in the search for a critical point in the nuclear matter phase diagram. As discussed previously, having longer bunches of gold ions is advantageous for this program. The longer bunches are made possible by six new “9 MHz” cavities, three per ring, which produce harmonic 120 RF buckets. This is one third the harmonic number (360) produced by the standard “28 MHz” cavities.

43 PARTICLE ACCELERATORS↗

Single pass electron beam cooling of gold ions between EBIS LINAC and booster is theoretically possible!

Electron beam cooling is examined as an option to reduce momentum of gold ions exiting the EBIS LINAC before injection into the booster. Electron beam parameters are based on experimental data (obtained at BNL) of electron beams extracted from a plasma cathode. Many issues, regarding a low energy high current electron beam that is needed for electron beam cooling to reduce momentum of gold ions exiting the EBIS LINAC before injection into the booster, were examined. Computations and some experimental data indicate that none of these issues is a show stopper. Preliminary calculations indicate that single pass cooling is feasible; momentum spread can be reduced by more than an order of magnitude in about one meter. Hence, this option cooling deserves further more serious considerations.

43 PARTICLE ACCELERATORS↗

Notes on adjusting gold ion momentum in RHIC to optimize electron cooling at injection

The proposed electron cooling of low-energy gold ions in RHIC and the detection of ion-electron recombination are reviewed in [1]. Optimal cooling requires that the gold ions have the same velocity as the electrons in the cooling section of the RHIC ring. This can be accomplished by making small adjustments of either the ion or the electron momentum.Such adjustments are necessary because although we can set the momentum with good accuracy, this may not be good enough to land precisely on the sweet spot where, as detected by the recombination monitor, the cooling is maximized.

43 PARTICLE ACCELERATORS↗

FY2014 Parameters for Gold Ions in Booster, AGS, and RHIC

The nominal parameters for gold ions in Booster, AGS, and RHIC are given for the FY2014 running period. The parameters are worked out using various formulas to derive mass, kinetic parameters, RF parameters, ring parameters, etc.. The ''standard setup'', ''medium-energy'', and ''low-energy'' parameters are summarized in separate sections.

43 PARTICLE ACCELERATORS↗

An additional gold ion energy in RHIC for the FY2021 run

Parameters for an additional gold ion energy in RHIC between 7.3 and 9.8 GeV per nucleon are considered here. The critical factor driving the choice of an energy in this range is the need to be sufficiently far from transition at AGS extraction. The ion energy favored by STAR, 8.65 GeV per nucleon, is found to be a suitable choice. The parameters for this energy are given in Section 7 of the following

43 PARTICLE ACCELERATORS↗

Anomalous patterns and nearly defect-free ripples produced by bombarding silicon and germanium with a beam of gold ions

We demonstrate that surface ripples with an exceptionally high degree of order can develop when germanium is bombarded with a broad beam of gold ions. In contrast, if silicon is sputtered with an Au{sup −} beam, patches of ripples with two distinct wave vectors can emerge. These types of order can be understood if the coupling between the surface morphology and composition is taken into account.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

FY2014 Parameters for Helions and Gold Ions in Booster, AGS, and RHIC

The nominal parameters for helions (helion is the bound state of two protons and one neutron, the nucleus of a helium-3 atom) and gold ions in Booster, AGS, and RHIC are given for the FY2014 running period. The parameters are found using various formulas to derive mass, helion anomalous g-factor, kinetic parameters, RF parameters, ring parameters, etc..

43 PARTICLE ACCELERATORS↗

Dimpling in critical current density vs. magnetic field angle in YBa{sub 2}Cu{sub 3}O{sub 7} films irradiated with 3-MeV gold ions

Magnetic-field-angle θ dependence of critical current density J{sub c} was measured in YBa{sub 2}Cu{sub 3}O{sub 7} films irradiated with 3-MeV gold ions. Such films were recently found to show large pinning force arising from point-like irradiation defects. A dimpled line-shape of J{sub c}(θ) and its variation with magnetic field strength were revealed that could be well described by a simple model based on flux-lattice shear and Blatter scaling. Our results strongly suggest that vortex elasticity and electron-mass anisotropy coordinately produce the characteristic J{sub c} anisotropy, called “shoulders,” in cuprate and iron-pnictide films.

36 MATERIALS SCIENCE↗

Structural Modification of Single Wall and Multiwalled Carbon Nanotubes under Carbon, Nickel and Gold Ion Beam Irradiation

Thin film samples of carbon nanotubes were irradiated with ion beam of carbon, nickel and gold. The irradiation results were characterized using Raman Spectroscopy. Modifications of the disorder mode (D mode) and the tangential mode (G mode) under different irradiation fluences were studied in detail. Raman results of carbon ion beam indicate the interesting phenomenon of ordering of the system under irradiation. Under the effect of nickel and gold ion irradiation, the structural evolution of CNTs occurs in three different stages. At lower fluences the process of healing occurs; at intermediate fluences damages on the surface of CNTs occurs and finally at very high fluences of the order of 1x10{sup 14} ions/cm{sup 2} the system gets amorphised.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

FY2020-21 parameters for Gold ions in Booster, AGS, and RHIC

Sections 1 through 6 of this report give parameters for low-energy gold ions circulating in RHIC at injection and in AGS at extraction. Section 7 gives parameters for Au79+ ions circulating in RHIC at the standard injection magnetic rigidity of 81.11378003 Tm. Sections 8 through 10 give parameters for medium-energy Au79+ ions circulating in RHIC at 31.2, 26.5, 19.5, 13.5 GeV per nucleon. To reach these energies, acceleration in RHIC is required. The magnetic rigidity at RHIC injection for these setups is 60.3050632557 Tm. The corresponding ion energy is 7.30950517185 GeV per nucleon.

43 PARTICLE ACCELERATORS↗