Search NASA⌕ Search

SEARCH · Search NASA

Results for “Gas-solid separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Design of a gas-solid-solid separator to remove ash from circulating fluidized bed reactors

Cyclones are one of the most common types of gas-solid separators used in circulating fluidized bed boilers. However, cyclones typically do not allow ash to leave the system through the cyclone exit, causing ash to build up in the fluidized bed and necessitating additional systems to remove ash that builds up in the bed. In this study, an alternative “disengager” gas-solid separator is proposed as a way of inherently separating small and large solids, resulting in a gas-solid-solid separation system where ash is allowed to leave the system along with gas while the desired fluidized bed material is retained. Unlike cyclones, which rely on centrifugal force to separate solids and gas, the disengager separates based on entrainment velocity of the particles. Upwards-flowing gas and particles strike a deflection plate and enter the disengaging chamber where particles with low terminal velocity such as ash fines flow with the gas, while larger particles such as sand fall to the bottom of the separator and are returned to the fluidized bed. In this study, several different proposed disengager configurations are simulated and compared to a typical cyclone using computational fluid dynamic (CFD) simulations. Furthermore, it was found that separation efficiency in the disengager is strongly influenced by the size of the deflection plate, rather than by the size of the unit itself. The predicted separation efficiency showed that compared to a cyclone, the disengager design allows significantly more ash to exit the system but retains a similar amount of desirable material. Additionally, the disengager was predicted to not suffer significantly more erosion that a cyclone.

42 ENGINEERING↗

Method and apparatus for desalinating water

This disclosure concerns a system and a method for removing dissolved solids from liquids. Specific implementations concern desalinating water. The system may comprise a blower, such as a thermal fan/compressor, configured to atomize a solid-bearing liquid to produce a hot, humid gas containing dissolved solids; a gas-solid separator configured to receive hot, humid gas containing entrained dissolved solids from the blower to separate the solids from the humid gas and to transmit the humid gas with solids removed through an exit port; a heater configured to heat the hot, humid gas received from the exit port of the gas-solid separator; and a condenser configured to receive heated humid gas from the heater and to condense solids-free liquid therefrom. The thermal fan/compressor may comprise a plurality of nozzles with outlets positioned adjacent atomization apertures across which a solid-bearing liquid flows and through which gas exiting the nozzles passes.

Abbasi, Bahman↗

Method and apparatus for desalinating water

This disclosure concerns a system and a method for removing dissolved solids from liquids. Specific implementations concern desalinating water. The system may comprise a blower, such as a thermal fan/compressor, configured to atomize a solid-bearing liquid to produce a hot, humid gas containing dissolved solids; a gas-solid separator configured to receive hot, humid gas containing entrained dissolved solids from the blower to separate the solids from the humid gas and to transmit the humid gas with solids removed through an exit port; a heater configured to heat the hot, humid gas received from the exit port of the gas-solid separator; and a condenser configured to receive heated humid gas from the heater and to condense solids-free liquid therefrom. The thermal fan/compressor may comprise a plurality of nozzles with outlets positioned adjacent atomization apertures across which a solid-bearing liquid flows and through which gas exiting the nozzles passes.

Abbasi, Bahman↗

Experimental study of the application of rotating fluidized beds to particle separation

Rotating fluidized beds provide a unique opportunity to exploit fluidization under higher particle forces. The centripetal force in a rotating fluid bed is typically on the order of 10 times the force of gravity. Since the force keeping the particles in the unit is larger, the drag force can also be larger, allowing for higher gas and slip velocities. This operating regime provides intensified gas-solids contact through higher mass transfer, heat transfer, gas throughput, and bubble suppression. One application for using a rotating fluidized bed is in Chemical Looping Combustion (CLC). When solid fuels are used, oxygen carrier and ash are mixed in the process. In order to maintain high carbon capture efficiencies and recyclability of the oxygen carrier, the ash needs to be separated from the oxygen carrier. This separation can be done aerodynamically since the oxygen carrier is larger and heavier than the ash. It is theorized that rotating fluidized beds could improve both the gas-solid and solid-solid separation process efficiency and throughput as compared to conventional fluidized beds. A 43 cm diameter, 2.5 cm long vortex chamber has been designed and constructed to investigate the application to particle separation. A series of experiments have been performed to investigate the separation of different binary mixtures of solids. These experiments demonstrate the use of a rotating fluidized bed for high-G intensified particle separation that can be combined with high-G intensified gas-solids contact and gas-solids separation.¼

01 COAL, LIGNITE, AND PEAT↗

Factors affecting cleanup of exhaust gases from a pressurized, fluidized-bed coal combustor

The cleanup of effluent gases from the fluidized-bed combustion of coal is examined. Testing conditions include the type and feed rate of the coal and the sulfur sorbent, the coal-sorbent ratio, the coal-combustion air ratio, the depth of the reactor fluidizing bed, and the technique used to physically remove fly ash from the reactor effluent gases. Tests reveal that the particulate loading matter in the effluent gases is a function not only of the reactor-bed surface gas velocity, but also of the type of coal being burnt and the time the bed is operating. At least 95 percent of the fly ash particules in the effluent gas are removed by using a gas-solids separator under controlled operating conditions. Gaseous pollutants in the effluent (nitrogen and sulfur oxides) are held within the proposed Federal limits by controlling the reactor operating conditions and the type and quantity of sorbent material.

Rollbuhler, R. J.↗

Lewis Research Center's coal-fired, pressurized, fluidized-bed reactor test facility

A 200-kilowatt-thermal, pressurized, fluidized-bed (PFB) reactor, research test facility was designed, constructed, and operated as part of a NASA-funded project to assess and evaluate the effect of PFB hot-gas effluent on aircraft turbine engine materials that might have applications in stationary-power-plant turbogenerators. Some of the techniques and components developed for this PFB system are described. One of the more important items was the development of a two-in-one, gas-solids separator that removed 95+ percent of the solids in 1600 F to 1900 F gases. Another was a coal and sorbent feed and mixing system for injecting the fuel into the pressurized combustor. Also important were the controls and data-acquisition systems that enabled one person to operate the entire facility. The solid, liquid, and gas sub-systems all had problems that were solved over the 2-year operating time of the facility, which culminated in a 400-hour, hot-gas, turbine test.

Kobak, J. A.↗

Separation of Carbon Monoxide and Carbon Dioxide for Mars ISRU-Concepts

Solid oxide electrolyzers, such as electrolysis cells utilizing yttria-stabilized zirconia, can produce oxygen from Mars atmospheric carbon dioxide and reject carbon monoxide and unreacted carbon dioxide in a separate stream. The oxygen-production process has been shown to be far more efficient if the high-pressure, unreacted carbon dioxide can be separated and recycled back into the feed stream. Additionally, the mass of the adsorption compressor can be reduced. Also, the carbon monoxide by-product is a valuable fuel for space exploration and habitation, with applications from fuel cells to production of hydrocarbons and plastics. In our research, we will design, construct, and test an innovative, robust, low mass, low power separation device that can recover carbon dioxide and carbon monoxide for Mars ISRU. Such fundamental process technology, involving gas-solid phase separation in a reduced gravitational environment, will help to enable Human Exploration and Development of Space. The separation device will be scaled to operate with a CO2 sorption compressor and a zirconia electrolysis device built at the NASA Ames Research Center and the University of Arizona, respectively. In our research, we will design, construct, and test an innovative, robust, low mass, low power separation device that can recover carbon dioxide and carbon monoxide for Mars ISRU, Such fundamental process technology, involving gas-solid phase separation in a reduced gravitational environment, will help to enable Human Exploration and Development of Space. The separation device will be scaled to operate with a CO2 sorption compressor and a zirconia electrolysis device built at the NASA Ames Research Center and the University of Arizona, The separation device will be scaled to operate with a CO2 sorption compressor and a zirconia electrolysis device built at the NASA Ames Research Center and the University of Arizona, Research needs for the design shown are as follows: (1) The best adsorbent for the process must be determined. (2) Adsorption isotherms must be measured, both for pure components and mixtures. (3) Mathematical modeling must be performed to provide a solid framework for design. (4) The separation system must be constructed and tested. (5) System integration must be studied.

LeVan, M. Douglas↗

Separation of Carbon Monoxide and Carbon Dioxide for Mars ISRU

The atmosphere of Mars has many resources that can be processed to produce things such as oxygen, fuel, buffer gas, and water for support of human exploration missions. Successful manipulation of these resources is crucial for safe, cost-effective, and self-sufficient long-term human exploration of Mars. In our research, we are developing enabling technologies that require fundamental knowledge of adsorptive gas storage and separation processes. In particular, we are designing and constructing an innovative, low mass, low power separation device to recover carbon dioxide and carbon monoxide for Mars ISRU (in-situ resource utilization). The technology has broad implications for gas storage and separations for gas-solid systems that are ideally suited for reduced gravitational environments. This paper describes our separation process design and experimental procedures and reports results for the separation of CO2 and CO by a four-step adsorption cycle.

Walton, Krista S.↗

Recovery of valuable components from waste LCD panel through a dry physical method

Highlights: • This paper aims at harmless treatment and resource recovery of waste LCD panel. • Indium tin oxide (ITO) was enriched from CF and TFT glass through mechanical exfoliation. • Vibrated gas-solid fluidized bed separation was introduced to investigate the separation of polarizing film and glass. •One flowsheet for recycling waste LCD panel synthetically which combine dry methods is proposed. - Abstract: A waste liquid crystal display (LCD) panel was recycled synthetically and cleanly by using dry physical methods, namely, mechanical exfoliation, dry crushing and vibrated gas–solid fluidized bed separation. Results of elemental and phase analyses show that indium and tin contents were enriched greatly in indium tin oxide concentrate obtained from colour filter and thin-film transistor glass. The results of crushing, ash content and scanning electron microscopic analyses show that when the LCD panel was crushed into particles smaller than 0.25 mm, the polarizer film is nearly completely liberated from the glass. Moreover, the results of vibrated gas–solid fluidized bed separation show that gas velocity and separation time are the main factors influencing the separation. The vibration intensity of 6.8, gas velocity of 13.6 cm/s and fluidizing time of 30 s are the optimum operating parameters, and the degree of separation and recovery of polarizing film reached up to 37.69 and 72.3%, respectively. Based on these results, the combination of dry enrichment, dry crushing and dry separation in a flowsheet is proposed for recycling of waste LCD panel.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Mapping the Interfacial Chemistry and Structure of Partially Fluorinated Bottlebrush Polymers and Their Linear Analogues

Polymer interfaces are key to a range of applications including membranes for chemical separations, hydrophobic coatings, and passivating layers for antifouling. While important, challenges remain in probing the interfacial monolayer where the molecular ordering and orientation can change depending on the chemical makeup or processing conditions. In this work, we leverage surface specific vibrational sum frequency generation (SFG) and the associated dependence on molecular symmetry to elucidate the ordering and orientations of key functional groups for poly(2,2,2-trifluoroethyl methacrylate) bottlebrush polymers and their linear polymer analogues. These measurements were framed by atomistic molecular dynamic simulations to provide a complementary physical picture of the gas–polymer interface. Simulations and SFG measurements show that methacrylate backbones are buried beneath a layer of trifluoroethyl containing side groups that result in structurally similar interfaces regardless of the polymer molecular weight or architecture. The average orientational angles of the trifluoroethyl containing side groups differ depending on polymer linear and bottlebrush architectures, suggesting that the surface groups can reorient via available rotational degrees of freedom. Results show that the surfaces of the bottlebrush and linear polymer samples do not strongly depend on molecular weight or architecture. As such, one cannot rely on increasing the molecular weight or altering the architecture to tune surface properties. This insight into the polymer interfacial structure is expected to advance the design of new material interfaces with tailored chemical/functional properties.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New technology for recovering residual metals from nonmetallic fractions of waste printed circuit boards

Highlights: • Vibrated gas-solid fluidized bed can recycle residual metals from WPCBs. • Glass fibers have bad effect on vibrated gas-solid fluidized bed segregation. • Each size fraction has its own optimum segregation parameters. • Fine size fraction has the worst segregation efficiency. - Abstract: Recycling of waste printed circuit boards is important for environmental protection and sustainable resource utilization. Corona electrostatic separation has been widely used to recycle metals from waste printed circuit boards, but it has poor separation efficiency for finer sized fractions. In this study, a new process of vibrated gas-solid fluidized bed was used to recycle residual metals from nonmetallic fractions, which were treated using the corona electrostatic separation technology. The effects of three main parameters, i.e., vibration frequency, superficial air flow velocity, and fluidizing time on gravity segregation, were investigated using a vibrating gas-solid fluidized bed. Each size fraction had its own optimum parameters. Corresponding to their optimal segregation performance, the products from each experiment were analyzed using an X-ray fluorescence (XRF) and a scanning electron microscope (SEM) equipped with an energy dispersive spectrometer (EDS). From the results, it can be seen that the metal recoveries of −1 + 0.5 mm, −0.5 + 0.25 mm, and −0.25 mm size fractions were 86.39%, 82.22% and 76.63%, respectively. After separation, each metal content in the −1 + 0.5 or −0.5 + 0.25 mm size fraction reduced to 1% or less, while the Fe and Cu contents are up to 2.57% and 1.50%, respectively, in the −0.25 mm size fraction. Images of the nonmetallic fractions with a size of −0.25 mm indicated that a considerable amount of clavate glass fibers existed in these nonmetallic fractions, which may explain why fine particles had the poorest segregation performance.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Isotopic composition and concentration of sulfur in carbonaceous chondrites

New sulfur isotopic ratio measurements are reported for seven carbonaceous chondrites. Newly developed procedures permit measurement of delta S-33, delta S-34, and delta S-36 at precisions significantly greater than previously reported. A search for S-36 nucleosynthetic anomalies coproduced with anomalies in, for example, Ti-50 and Ca-48 was negative. The high endemic sulfur concentration probably dilutes any S-36 anomaly, and separation of individual sulfur phases may be needed to identify S-36 carrier phases. Large internal isotopic variations are observed, deriving from parent body and possibly nebular processes. Chondrule separates from Allende demonstrate isotopic compositions which vary as a function of diameter. High-temperature gas-solid exchange and a two-component mixing model may account for the observations. High-resolution isotopic data and structural information are reported for organic sulfur compounds separated by chemical extractions. The insoluble organics appear to be of either aliphatic or alicyclic structure and are dominant phases.

Gao, Xia↗

Multiresolution GPC-Structured Control of a Single-Loop Cold-Flow Chemical Looping Testbed

Chemical looping is a near-zero emission process for generating power from coal. It is based on a multi-phase gas-solid flow and has extremely challenging nonlinear, multi-scale dynamics with jumps, producing large dynamic model uncertainty, which renders traditional robust control techniques, such as linear parameter varying H ∞ design, largely inapplicable. This process complexity is addressed in the present work through the temporal and the spatiotemporal multiresolution modeling along with the corresponding model-based control laws. Namely, the nonlinear autoregressive with exogenous input model structure, nonlinear in the wavelet basis, but linear in parameters, is used to identify the dominant temporal chemical looping process dynamics. The control inputs and the wavelet model parameters are calculated by optimizing a quadratic cost function using a gradient descent method. The respective identification and tracking error convergence of the proposed self-tuning identification and control schemes, the latter using the unconstrained generalized predictive control structure, is separately ascertained through the Lyapunov stability theorem. The rate constraint on the control signal in the temporal control law is then imposed and the control topology is augmented by an additional control loop with self-tuning deadbeat controller which uses the spatiotemporal wavelet riser dynamics representation. The novelty of this work is three-fold: (1) developing the self-tuning controller design methodology that consists in embedding the real-time tunable temporal highly nonlinear, but linearly parametrizable, multiresolution system representations into the classical rate-constrained generalized predictive quadratic optimal control structure, (2) augmenting the temporal multiresolution loop by a more complex spatiotemporal multiresolution self-tuning deadbeat control loop, and (3) demonstrating the effectiveness of the proposed methodology in producing fast recursive real-time algorithms for controlling highly uncertain nonlinear multiscale processes. The latter is shown through the data from the implemented temporal and augmented spatiotemporal solutions of a difficult chemical looping cold flow tracking control problem.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A novel chemical looping partial oxidation process for thermochemical conversion of biomass to syngas

The Biomass-to-Syngas (BTS) chemical looping process is an advanced thermochemical biomass conversion process for the production of sustainable fuels and chemicals. The BTS process is novel in that it converts biomass feedstock to high purity syngas with adjustable H 2 :CO molar ratio without needing an air separation unit (ASU), a tar reformer, a steam reformer, or a water-gas-shift (WGS) reactor. In the BTS process, biomass feedstock is partially oxidized to produce syngas by oxygen carriers in a reducer that is operated in a co-current gas-solid moving bed contact mode. The reduced oxygen carriers are regenerated in a fluidized bed combustor via the oxidation reaction with air. The BTS process uses the iron-titanium composite metal oxide (ITCMO) material as the oxygen carrier, which is capable of cracking the volatiles produced in biomass pyrolysis as well as regulating the syngas composition. The co-current moving bed reducer eliminates back-mixing, channeling, or bypassing of solid and gas reactants, resulting in a syngas composition that is close to the thermodynamic equilibrium. In this paper, the rationale of a successful BTS process is discussed along with the thermodynamic characteristics of the ITCMO oxygen carrier, that can effectively react with a woody biomass feedstock, analyzed based on an ASPEN Plus model. Bench scale moving bed reducer experiments are presented, indicating the conversion of wood pellets to syngas with a H 2 :CO ratio of 2, which is suitable for methanol or liquid fuel synthesis. The gas and solid composition produced in the bench scale reducer matches the prediction from the ASPEN Plus thermodynamic model. Furthermore, this model is further used to analyze the performance of the BTS process under autothermal conditions for methanol production, with a comparison with a baseline indirectly heated gasification process.

09 BIOMASS FUELS↗

Gas-solid reaction pathway for chlorination of rare earth and actinide metals using hydrogen and chlorine gas

Hydriding and chlorination of buttons of metallic cerium have been tested as a head-end step to separating metal impurities from actinides. The objective here was to achieve complete conversion to chlorides while maintaining high surface area via small particles and open porosity. Hydriding by reaction with 100% H 2 gas at 573 K was successful at reducing cm-scale metal buttons into small particles/fragments. This step was followed by reaction with flowing 99.5% anhydrous Cl 2 gas at temperatures ranging from 423 to 573 K for 60 min. In experiments reported here, up to 92% conversion to cerium chloride was achieved from reacting with the anhydrous chlorine gas. The final chloride product has high porosity coupled with small particle sizes (microns to 1600 μm), which makes it suitable for subsequent purification processes. Higher chlorine concentrations in the gas favor higher conversion to chloride. The optimal temperature to achieve high chlorination is 523 K. Oxygen is a minor impurity in the chlorine gas which appears to prevent complete chlorination from being achieved.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Kinetic theory-based numerical modeling and analysis of bi-disperse segregated mixture fluidized bed

We discuss a series of continuum Euler-Euler simulations of an initially mixed bi-disperse fluidized bed which segregates under certain operating conditions. The simulations use the multi-phase kinetic theory-based description of the momentum and energy exchanges between the phases by Simonin’s Group [see e.g. Gourdel, Simonin and Brunier (1999). Proceedings of 6th International Conference on Circulating Fluidized Beds, Germany, pp. 205-210]. The discussion and analysis of the results focus on the fluid-particle momentum exchange (i.e. drag). Simulations using mono- and poly-disperse fluid-particle drag correlations are analyzed for the Geldart D-type size bi-disperse gas-solid experiments performed by Goldschmidt et al. [Powder Tech., pp. 135-159 (2003)]. The poly-disperse gas-particle drag correlations account for the local particle size distribution by using an effective mixture diameter when calculating the Reynolds number and then correcting the resulting force coefficient. Simulation results show very good predictions of the segregation index for bidisperse beds with the mono-disperse drag correlations contrary to the poly-disperse drag correlations for which the segregation rate is systematically under-predicted. The statistical analysis of the results shows a clear separation in the distribution of the gas-particle mean relaxation times of the small and large particles with simulations using the mono-disperse drag. In contrast, the poly-disperse drag simulations have a significant overlap and also a smaller difference in the mean particle relaxation times. This results in the small and large particles in the bed to respond to the gas similarly without enough relative time lag. The results suggest that the difference in the particle response time induce flow dynamics favorable to a force imbalance which results in the segregation.

97 MATHEMATICS AND COMPUTING↗

Online chemical adsorption studies of Hg, Tl, and Pb on SiO 2 and Au surfaces in preparation for chemical investigations on Cn, Nh, and Fl at TASCA

Online gas-solid adsorption studies with single-atom quantities of Hg, Tl, and Pb, the lighter homologs of the superheavy elements (SHE) copernicium (Cn, Z=112), nihonium (Nh, Z=113), and flerovium (Fl, Z=114), were carried out using short-lived radioisotopes. The interaction with Au and SiO 2 surfaces was studied and the overall chemical yield was determined. Here, suitable radioisotopes were produced in fusion-evaporation reactions, isolated in the gas-filled recoil separator TASCA, and flushed rapidly to an adjacent setup of two gas chromatography detector arrays covered with SiO 2 (first array) and Au (second array). While Tl and Pb adsorbed on the SiO 2 surface, Hg interacts only weakly and reached the Au-covered array. Our results contribute to elucidating the influence of relativistic effects on chemical properties of the heaviest elements by providing experimental data on these lighter homologs.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗