Search NASA⌕ Search

SEARCH · Search NASA

Results for “Genesis solar wind”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

RIMS analysis of Ca and Cr in genesis solar wind collectors.

RIMS depth profiles have been measured for Cr and Ca in Genesis solar wind collector made from Si and compared to such measurements for ion-implanted Si reference material. The presence of surface contamination has been shown to be a significant factor influencing the total Ca and Cr fluence measured in the Genesis collectors. A procedure to remove the contaminant signal from these depth profiles using the reference material implanted with a minor isotope demonstrated that 36% of the measured Ca fluence in our Genesis sample comes from terrestrial contamination.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Discrimination and quantification of Fe and Ni abundances in Genesis solar wind implanted collectors using X-ray standing wave fluorescence yield depth profiling with internal referencing

In this paper, X-ray standing wave fluorescence yield depth profiling was used to determine the solar wind implanted Fe and Ni fluences in a silicon-on-sapphire (SoS) Genesis collector (60326). An internal reference standardization method was developed based on fluorescence from Si and Al in the collector materials. Measured Fe fluence agreed well with that measured previously by us on a sapphire collector (50722) as well as SIMS results by Jurewicz et al. Measured Ni fluence was higher than expected by a factor of two; neither instrumental errors nor solar wind fractionation effects are considered significant perturbations to this value. Impurity Ni within the epitaxial Si layer, if present, could explain the high Ni fluences and therefore needs further investigation. As they stand, these results are consistent with minor temporally-variable Fe and Ni fractionation on the timescale of a year.

36 MATERIALS SCIENCE↗

Magnesium isotopes of the bulk solar wind from Genesis diamond-like carbon films

–NASA’s Genesis Mission returned solar wind (SW) to the Earth for analysis to derive the composition of the solar photosphere from solar material. SW analyses control the precision of the derived solar compositions, but their ultimate accuracy is limited by the theoretical or empirical models of fractionation due to SW formation. Mg isotopes are “ground truth” for these models since, except for CAIs, planetary materials have a uniform Mg isotopic composition (within ≤1&) so any significant isotopic fractionation of SW Mg is primarily that of SW formation and subsequent acceleration through the corona. This study analyzed Mg isotopes in a bulk SW diamond-like carbon (DLC) film on silicon collector returned by the Genesis Mission. A novel data reduction technique was required to account for variable ion yield and instrumental mass fractionation (IMF) in the DLC. The resulting SW Mg fractionation relative to the DSM-3 laboratory standard was ( 14.4&, 30.2&) (4.1&, 5.5&), where the uncertainty is 2σ SE of the data combined with a 2.5& (total) error in the IMF determination. Two of the SW fractionation models considered generally agreed with our data. Their possible ramifications are discussed for O isotopes based on the CAI nebular composition of McKeegan et al. (2011).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

White light interferometry for quantitative surface characterization in ion sputtering experiments.

White light interferometry (WLI) can be used to obtain surface morphology information on dimensional scale of millimeters with lateral resolution as good as {approx}1 {micro}m and depth resolution down to 1 nm. By performing true three-dimensional imaging of sample surfaces, the WLI technique enables accurate quantitative characterization of the geometry of surface features and compares favorably to scanning electron and atomic force microscopies by avoiding some of their drawbacks. In this paper, results of using the WLI imaging technique to characterize the products of ion sputtering experiments are reported. With a few figures, several example applications of the WLI method are illustrated when used for (i) sputtering yield measurements and time-to-depth conversion, (ii) optimizing ion beam current density profiles, the shapes of sputtered craters, and multiple ion beam superposition and (iii) quantitative characterization of surfaces processed with ions. In particular, for sputter depth profiling experiments of {sup 25}Mg, {sup 44}Ca and {sup 53}Cr ion implants in Si (implantation energy of 1 keV per nucleon), the depth calibration of the measured depth profile curves determined by the WLI method appeared to be self-consistent with TRIM simulations for such projectile-matrix systems. In addition, high depth resolution of the WLI method is demonstrated for a case of a Genesis solar wind Si collector surface processed by gas cluster ion beam: a 12.5 nm layer was removed from the processed surface, while the transition length between the processed and untreated areas was 150 {micro}m.

99 GENERAL AND MISCELLANEOUS↗

ISOTOPIC MASS FRACTIONATION OF SOLAR WIND: EVIDENCE FROM FAST AND SLOW SOLAR WIND COLLECTED BY THE GENESIS MISSION

NASA's Genesis space mission returned samples of solar wind collected over {approx}2.3 years. We present elemental and isotopic compositions of He, Ne, and Ar analyzed in diamond-like carbon targets from the slow and fast solar wind collectors to investigate isotopic fractionation processes during solar wind formation. The solar wind provides information on the isotopic composition for most volatile elements for the solar atmosphere, the bulk Sun and hence, on the solar nebula from which it formed 4.6 Ga ago. Our data reveal a heavy isotope depletion in the slow solar wind compared to the fast wind composition by 63.1 {+-} 2.1 per mille for He, 4.2 {+-} 0.5 per mille amu{sup -1} for Ne and 2.6 {+-} 0.5 per mille amu{sup -1} for Ar. The three Ne isotopes suggest that isotopic fractionation processes between fast and slow solar wind are mass dependent. The He/H ratios of the collected slow and fast solar wind samples are 0.0344 and 0.0406, respectively. The inefficient Coulomb drag model reproduces the measured isotopic fractionation between fast and slow wind. Therefore, we apply this model to infer the photospheric isotopic composition of He, Ne, and Ar from our solar wind data. We also compare the isotopic composition of oxygen and nitrogen measured in the solar wind with values of early solar system condensates, probably representing solar nebula composition. We interpret the differences between these samples as being due to isotopic fractionation during solar wind formation. For both elements, the magnitude and sign of the observed differences are in good agreement with the values predicted by the inefficient Coulomb drag model.

79 ASTRONOMY AND ASTROPHYSICS↗

Depth profiling analysis of solar wind helium collected in diamond-like carbon film from Genesis

The distribution of solar-wind ions in Genesis mission collectors, as determined by depth profiling analysis, constrains the physics of ion solid interactions involving the solar wind. Thus, they provide an experimental basis for revealing ancient solar activities represented by solar-wind implants in natural samples. We measured the first depth profile of ⁴He in a collector; the shallow implantation (peaking at <20 nm) required us to use sputtered neutral mass spectrometry with post-photoionization by a strong field. The solar wind He fluence calculated using depth profiling is ~8.5 x 10¹⁴ cm⁻². The shape of the solar wind ⁴He depth profile is consistent with TRIM simulations using the observed ⁴He velocity distribution during the Genesis mission. It is therefore likely that all solar-wind elements heavier than H are completely intact in this Genesis collector and, consequently, the solar particle energy distributions for each element can be calculated from their depth profiles. Ancient solar activities and space weathering of solar system objects could be quantitatively reproduced by solar particle implantation profiles.

79 ASTRONOMY AND ASTROPHYSICS↗

A HETEROGENEOUS CHEMICAL ORIGIN FOR THE {sup 16}O-ENRICHED AND {sup 16}O-DEPLETED RESERVOIRS OF THE EARLY SOLAR SYSTEM

The oldest solids formed in the solar system, calcium-aluminum inclusions, are {sup 16}O-enriched compared to chondrules, asteroids, Earth, and Mars. Based on the preliminary measurements of the solar wind by Genesis, the Sun also appears to be {sup 16}O-enriched. This distribution of oxygen isotopes in the solar system cannot be reconciled via conventional mass-dependent isotopic fractionation processes and instead require the existence and/or production of distinct {sup 16}O-enriched and {sup 16}O-depleted reservoirs in the early solar system. The origin of these distinct reservoirs is unknown, although several mechanisms have been proposed to date including the following: (1) the injection of pure {sup 16}O by a supernova into the protoplanetary disk or parent molecular cloud, (2) self-shielding of CO in the parent molecular cloud or protoplanetary disk, (3) symmetry-dependent chemical fractionation processes in the protoplanetary disk, and (4) Galactic chemical evolution. While some of these proposals have been ruled out, the validity of others is still open. Here I propose that the {sup 16}O-enriched and {sup 16}O-depleted reservoirs present in the early solar system originated in the parent molecular cloud via the heterogeneous chemical processes that form H{sub 2}O, a significant oxygen reservoir, on the surface of interstellar (IS) dust grains in dense molecular clouds, the astrophysical setting where star formation is observed to occur. As a consequence, this model predicts that molecular cloud H{sub 2}O and possibly other IS solids inherited from the molecular cloud were depleted in {sup 16}O compared to the bulk gas-phase O present, thus providing distinct {sup 16}O reservoirs at the earliest stages of planetary formation.

79 ASTRONOMY AND ASTROPHYSICS↗

VARIATIONS IN SOLAR WIND FRACTIONATION AS SEEN BY ACE/SWICS AND THE IMPLICATIONS FOR GENESIS MISSION RESULTS

We use Advanced Composition Explorer (ACE)/Solar Wind Ion Composition Spectrometer (SWICS) elemental composition data to compare the variations in solar wind (SW) fractionation as measured by SWICS during the last solar maximum (1999–2001), the solar minimum (2006–2009), and the period in which the Genesis spacecraft was collecting SW (late 2001—early 2004). We differentiate our analysis in terms of SW regimes (i.e., originating from interstream or coronal hole flows, or coronal mass ejecta). Abundances are normalized to the low-first ionization potential (low-FIP) ion magnesium to uncover correlations that are not apparent when normalizing to high-FIP ions. We find that relative to magnesium, the other low-FIP elements are measurably fractionated, but the degree of fractionation does not vary significantly over the solar cycle. For the high-FIP ions, variation in fractionation over the solar cycle is significant: greatest for Ne/Mg and C/Mg, less so for O/Mg, and the least for He/Mg. When abundance ratios are examined as a function of SW speed, we find a strong correlation, with the remarkable observation that the degree of fractionation follows a mass-dependent trend. We discuss the implications for correcting the Genesis sample return results to photospheric abundances.

79 ASTRONOMY AND ASTROPHYSICS↗

OXYGEN ISOTOPIC COMPOSITIONS OF SOLAR CORUNDUM GRAINS

Oxygen is one of the major rock-forming elements in the solar system and the third most abundant element of the Sun. Oxygen isotopic composition of the Sun, however, is not known due to a poor resolution of astronomical spectroscopic measurements. Several DELTA{sup 17}O values have been proposed for the composition of the Sun based on (1) the oxygen isotopic measurements of the solar wind implanted into metallic particles in lunar soil (< -20 per mille by Hashizume and Chaussidon and approx +26 per mille by Ireland et al.), (2) the solar wind returned by the Genesis spacecraft (-27 per mille +- 6 per mille by McKeegan et al.), and (3) the mineralogically pristine calcium-aluminum-rich inclusions (CAIs) (-23.3 per mille +- 1.9 per mille by Makide et al. and -35 per mille by Gounelle et al.). CAIs are the oldest solar system solids, and are believed to have formed by evaporation, condensation, and melting processes in hot nebular region(s) when the Sun was infalling (Class 0) or evolved (Class 1) protostar. Corundum (Al{sub 2}O{sub 3}) is thermodynamically the first condensate from a cooling gas of solar composition. Corundum-bearing CAIs, however, are exceptionally rare, suggesting either continuous reaction of the corundum condensates with a cooling nebular gas and their replacement by hibonite (CaAl{sub 12}O{sub 19}) or their destruction by melting together with less refractory condensates during formation of igneous CAIs. In contrast to the corundum-bearing CAIs, isolated micrometer-sized corundum grains are common in the acid-resistant residues from unmetamorphosed chondrites. These grains could have avoided multistage reprocessing during CAI formation and, therefore, can potentially provide constraints on the initial oxygen isotopic composition of the solar nebula, and, hence, of the Sun. Here we report oxygen isotopic compositions of approx60 micrometer-sized corundum grains in the acid-resistant residues from unequilibrated ordinary chondrites (Semarkona (LL3.0), Bishunpur (LL3.1), Roosevelt County 075 (H3.2)) and unmetamorphosed carbonaceous chondrites (Orgueil (CI1), Murray (CM2), and Alan Hills A77307 (CO3.0)) measured with a Cameca ims-1280 ion microprobe. All corundum grains, except two, are {sup 16}O-rich (DELTA{sup 17}O = -22.7 per mille +- 8.5 per mille, 2sigma), and compositionally similar to the mineralogically pristine CAIs from the CR carbonaceous chondrites (-23.3 per mille +- 1.9 per mille, 2sigma), and solar wind returned by the Genesis spacecraft (-27 per mille +- 6 per mille, 2sigma). One corundum grain is highly {sup 17}O-enriched (delta{sup 17}O approx +60 per mille, delta{sup 18}O approx -40 per mille) and is probably of the presolar origin; the origin of another {sup 17}O-rich grain (delta{sup 17}O approx -15 per mille , delta{sup 18}O approx -35 per mille) is unclear. We conclude that the {sup 16}O-rich corundum grains in the acid-resistant residues from unequilibrated ordinary and unmetamorphosed carbonaceous chondrites recorded initial oxygen isotopic composition of the solar nebula, and, hence, of the Sun. Our inferred oxygen isotopic composition of the Sun is inconsistent with the more extreme {sup 16}O-rich value (DELTA{sup 17}O approx -35 per mille) proposed by Gounelle et al. on the basis of two extremely {sup 16}O-rich CAIs from the CH/CB-like chondrite Isheyevo and with the {sup 16}O-poor value observed as a component of the solar wind implanted into the metallic particles in lunar soil (Ireland et al.).

79 ASTRONOMY AND ASTROPHYSICS↗

Determining the Elemental and Isotopic Composition of the Pre-solar Nebula from Genesis Data Analysis: The Case of Oxygen

Here, we compare element and isotopic fractionations measured in bulk solar wind samples collected by NASA's Genesis mission with those predicted from models incorporating both the ponderomotive force in the chromosphere and conservation of the first adiabatic invariant in the low corona. Generally good agreement is found, suggesting that these factors are consistent with the process of solar wind fractionation. Based on bulk wind measurements, we also consider in more detail the isotopic and elemental abundances of O. We also find mild support for an O abundance in the range 8.75–8.83, with a value as low as 8.69 disfavored. A stronger conclusion must await solar wind regime-specific measurements from the Genesis samples.

79 ASTRONOMY AND ASTROPHYSICS↗

Depth profiling and standardization from the back side of a sample for accurate analyses: Emphasis on quantifying low‐fluence, shallow implants in diamond‐like carbon

Rationale Back‐side thinning of wafers is used to eliminate issues with transient sputtering when analyzing near‐surface element distributions. Precise and accurate calibrated implants are created by including a standard reference material during the implantation. Combining these methods allows accurate analysis of low‐fluence, shallow features even if matrix effects are a concern. Methods Implanted Na (<2.0 × 10 11 ions/cm 2 , peaking <50 nm) in diamond‐like carbon (DLC) film on silicon (solar wind returned by NASA's Genesis mission) was prepared for measurement as follows. Implanted surfaces of samples were epoxied to wafers and back‐side‐thinned using physical or chemical methods. Thinned samples were then implanted with reference ions for accurate quantification of the solar wind implant. Analyses used a CAMECA IMS 7f‐GEO SIMS in depth‐profiling mode. Results Back‐side‐implanted reference ions reduced the need to change sample mounts or stage position and could be spatially separated from the solar wind implant even when measuring monoisotopic ions. Matrix effects in DLC were mitigated and the need to find an identical piece of DLC for a reference implant was eliminated. Accuracy was only limited by the back‐side technique itself. Conclusions Combining back‐side depth profiling with back‐side‐implanted internal standards aides quantification of shallow mono‐ and polyisotopic implants. This technique helps mitigate matrix effects and keeps measurement conditions consistent. Depth profile acquisition times are longer, but if sample matrices are homogeneous, procedural changes can decrease measurement times.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

IS THE SUN LIGHTER THAN THE EARTH? ISOTOPIC CO IN THE PHOTOSPHERE, VIEWED THROUGH THE LENS OF THREE-DIMENSIONAL SPECTRUM SYNTHESIS

We consider the formation of solar infrared (2-6 {mu}m) rovibrational bands of carbon monoxide (CO) in CO5BOLD 3D convection models, with the aim of refining abundances of the heavy isotopes of carbon ({sup 13}C) and oxygen ({sup 18}O, {sup 17}O), to compare with direct capture measurements of solar wind light ions by the Genesis Discovery Mission. We find that previous, mainly 1D, analyses were systematically biased toward lower isotopic ratios (e.g., R {sub 23} {identical_to} {sup 12}C/{sup 13}C), suggesting an isotopically 'heavy' Sun contrary to accepted fractionation processes that were thought to have operated in the primitive solar nebula. The new 3D ratios for {sup 13}C and {sup 18}O are R {sub 23} = 91.4 {+-} 1.3 (R {sub Circled-Plus} = 89.2) and R {sub 68} = 511 {+-} 10 (R {sub Circled-Plus} = 499), where the uncertainties are 1{sigma} and 'optimistic'. We also obtained R {sub 67} = 2738 {+-} 118 (R {sub Circled-Plus} = 2632), but we caution that the observed {sup 12}C{sup 17}O features are extremely weak. The new solar ratios for the oxygen isotopes fall between the terrestrial values and those reported by Genesis (R {sub 68} = 530, R {sub 67} = 2798), although including both within 2{sigma} error flags, and go in the direction favoring recent theories for the oxygen isotope composition of Ca-Al inclusions in primitive meteorites. While not a major focus of this work, we derive an oxygen abundance, {epsilon}{sub O} {approx} 603 {+-} 9 ppm (relative to hydrogen; log {epsilon} {approx} 8.78 on the H = 12 scale). The fact that the Sun is likely lighter than the Earth, isotopically speaking, removes the necessity of invoking exotic fractionation processes during the early construction of the inner solar system.

79 ASTRONOMY AND ASTROPHYSICS↗

Understanding heterogeneity in Genesis diamond-like carbon film using SIMS analysis of implants

An amorphous diamond-like carbon film deposited on silicon made at Sandia National Laboratory by pulsed laser deposition was one of several solar wind (SW) collectors used by the Genesis Mission (NASA Discovery Class Mission #5). The film was ~1 μm thick, amorphous, anhydrous, and had a high ratio of sp 3 –sp 2 bonds (>50%). For 27 months of exposure to space at the first We passively irradiated lagrange point, the collectors, with SW (H fluence ~2 × 10 16 ions cm -2 ; He fluence ~8 × 10 14 ions cm -2 ). The radiation damage caused by the implanted H ions peaked at 12–14 nm below the surface of the film and that of He about 20–23 nm. To enable quantitative measurement of the SW fluences by secondary ion mass spectroscopy, minor isotopes of Mg ( 25 Mg and 26 Mg) were commercially implanted into flight-spare collectors at 75 keV and a fluence of 1 × 10 14 ions cm -2 . Furthermore, the shapes of analytical depth profiles, the rate at which the profiles were sputtered by a given beam current, and the intensity of ion yields are used to characterize the structure of the material in small areas (~200 × 200 ± 50 μm). Data were consistent with the hypothesis that minor structural changes in the film were induced by SW exposure.

36 MATERIALS SCIENCE↗

Combination of imaging mass spectrometry and electron microscopy for quasi nondestructive surface analysis

We report on a combination of imaging mass spectrometry (MS) and scanning electron microscopy (SEM) developed in a custom designed time-of-flight (TOF) MS instrument with laser post-ionization of sputtered atoms. Elemental (by MS) and topographical (by SEM) mapping of surfaces of heavily contaminated Si collectors from the NASA Genesis sample return mission enabled obtaining much more accurate and detailed depth distribution of the Solar Wind Mg and Ca implanted in these collectors. This is because the cleanest areas were identified by the SEM/MS mapping, and high resolution sputter depth profiling at these locations revealed near-surface (0-15 nm) depth distribution of Mg and Ca, that were used for more accurate fluence calculations of these Solar Wind species. MS imaging was virtually nondestructive at primary ion fluence 10(12) cm(-2), causing no effect on accuracy and precision of quantitative depth profiling that followed the imaging. We also demonstrate importance of such an approach by directly comparing high resolution depth profiles measured on clean areas versus arbitrarily selected areas.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Application of Spatial Data Modeling and Geographical Information Systems (GIS) for Identification of Potential Siting Options for Various Electrical Generation Sources

Oak Ridge National Laboratory (ORNL) initiated an internal National Electric Generation Siting Study, which is an ongoing multiphase study addressing several key questions related to our national electrical energy supply. This effort has led to the development of a tool, OR-SAGE (Oak Ridge Siting Analysis for power Generation Expansion), to support siting evaluations. The objective in developing OR-SAGE was to use industry-accepted approaches and/or develop appropriate criteria for screening sites and employ an array of Geographic Information Systems (GIS) data sources at ORNL to identify candidate areas for a power generation technology application. The initial phase of the study examined nuclear power generation. These early nuclear phase results were shared with staff from the Electric Power Research Institute (EPRI), which formed the genesis and support for an expansion of the work to several other power generation forms, including advanced coal with carbon capture and storage (CCS), solar, and compressed air energy storage (CAES). Wind generation was not included in this scope of work for EPRI. The OR-SAGE tool is essentially a dynamic visualization database. The results shown in this report represent a single static set of results using a specific set of input parameters. In this case, the GIS input parameters were optimized to support an economic study conducted by EPRI. A single set of individual results should not be construed as an ultimate energy solution, since US energy policy is very complex. However, the strength of the OR-SAGE tool is that numerous alternative scenarios can be quickly generated to provide additional insight into electrical generation or other GIS-based applications. The screening process divides the contiguous United States into 100 x 100 m (1-hectare) squares (cells), applying successive power generation-appropriate site selection and evaluation criteria (SSEC) to each cell. There are just under 700 million cells representing the contiguous United States. If a cell meets the requirements of each criterion, the cell is deemed a candidate area for siting a specific power generation form relative to a reference plant for that power type. Some SSEC parameters preclude siting a power plant because of an environmental, regulatory, or land-use constraint. Other SSEC assist in identifying less favorable areas, such as proximity to hazardous operations. All of the selected SSEC tend to recommend against sites. The focus of the ORNL electrical generation source siting study is on identifying candidate areas from which potential sites might be selected, stopping short of performing any detailed site evaluations or comparisons. This approach is designed to quickly screen for and characterize candidate areas. Critical assumptions supporting this work include the supply of cooling water to thermoelectric power generation; a methodology to provide an adequate siting footprint for typical power plant applications; a methodology to estimate thermoelectric plant capacity while accounting for available cooling water; and a methodology to account for future ({approx}2035) siting limitations as population increases and demands on freshwater sources change. OR-SAGE algorithms were built to account for these critical assumptions. Stream flow is the primary thermoelectric plant cooling source evaluated in this study. All cooling was assumed to be provided by a closed-cycle cooling (CCC) system requiring makeup water to account for evaporation and blowdown. Limited evaluations of shoreline cooling and the use of municipal processed water (gray) cooling were performed. Using a representative set of SSEC as input to the OR-SAGE tool and employing the accompanying critical assumptions, independent results for the various power generation sources studied were calculated.

01 COAL, LIGNITE, AND PEAT↗

SOLAR X-RAY JETS, TYPE-II SPICULES, GRANULE-SIZE EMERGING BIPOLES, AND THE GENESIS OF THE HELIOSPHERE

From Hinode observations of solar X-ray jets, Type-II spicules, and granule-size emerging bipolar magnetic fields in quiet regions and coronal holes, we advocate a scenario for powering coronal heating and the solar wind. In this scenario, Type-II spicules and Alfven waves are generated by the granule-size emerging bipoles (EBs) in the manner of the generation of X-ray jets by larger magnetic bipoles. From observations and this scenario, we estimate that Type-II spicules and their co-generated Alfven waves carry into the corona an area-average flux of mechanical energy of {approx}7 x 10{sup 5} erg cm{sup -2} s{sup -1}. This is enough to power the corona and solar wind in quiet regions and coronal holes, and therefore indicates that the granule-size EBs are the main engines that generate and sustain the entire heliosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

Branching Ratios in Vacuum Ultraviolet Photodissociation of CO and N 2 : Implications for Oxygen and Nitrogen Isotopic Compositions of the Solar Nebula

NASA's Genesis mission reveals that the rare isotope 15 N is approximately seven times more enriched than the rare isotopes 17 O and 18 O in the terrestrial planets relative to the Sun. Here, we explain this peculiar observation under the framework of self-shielding and the difference in chemical reactivity between the excited O( 1 D ) [N( 2 D )] and the ground O( 3 P ) [N( 4 S )] states produced by VUV photodissociation of CO [N 2 ]. After weighting the absorption cross-sections for individual photodissociation bands, and taking into account the mutual shielding by H 2 , the CO/N 2 ratio, and the partition of O and N among gas:ice:dust phases in the solar nebula, we show that the trapping of N( 2 D ) via hydrogenation is favored over that of O( 1 D ). As a result, this provides a possible explanation of the Genesis results and supports the self-shielding model as the primary mechanism for generating isotopic anomalies of O and N in the early solar nebula.

79 ASTRONOMY AND ASTROPHYSICS↗

GENESIS OF INTERPLANETARY INTERMITTENT TURBULENCE: A CASE STUDY OF ROPE–ROPE MAGNETIC RECONNECTION

In a recent paper, the relation between current sheet, magnetic reconnection, and turbulence at the leading edge of an interplanetary coronal mass ejection was studied. We report here the observation of magnetic reconnection at the interface region of two interplanetary magnetic flux ropes. The front and rear boundary layers of three interplanetary magnetic flux ropes are identified, and the structures of magnetic flux ropes are reconstructed by the Grad–Shafranov method. A quantitative analysis of the reconnection condition and the degree of intermittency reveals that rope–rope magnetic reconnection is the most likely site for genesis of interplanetary intermittency turbulence in this event. The dynamic pressure pulse resulting from this reconnection triggers the onset of a geomagnetic storm.

79 ASTRONOMY AND ASTROPHYSICS↗