Search NASA⌕ Search

SEARCH · Search NASA

Results for “Geometric curvature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Geometric curvature and phase of the Rabi model

We study the geometric curvature and phase of the Rabi model. Under the rotating-wave approximation (RWA), we apply the gauge independent Berry curvature over a surface integral to calculate the Berry phase of the eigenstates for both single and two-qubit systems, which is found to be identical with the system of spin-1/2 particle in a magnetic field. We extend the idea to define a vacuum-induced geometric curvature when the system starts from an initial state with pure vacuum bosonic field. The induced geometric phase is related to the average photon number in a period which is possible to measure in the qubit–cavity system. We also calculate the geometric phase beyond the RWA and find an anomalous sudden change, which implies the breakdown of the adiabatic theorem and the Berry phases in an adiabatic cyclic evolution are ill-defined near the anti-crossing point in the spectrum.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Durability of plasma sprayed Thermal Barrier Coatings with controlled properties part Ⅱ: Effects of geometrical curvature

The present investigation elucidates the effects of substrate curvature on the durability of Air Plasma Sprayed (APS) Thermal Barrier Coatings (TBCs). Traditionally, planar disk specimens are utilized in Furnace Cycle Testing (FCT). In most cases, delamination is initiated at the disk's free edge and then propagates along the TBC-bond coat interface. However, in turbine components (e.g., blades/vanes), they lack significant free edges and the coatings are deposited on non-flat surfaces of varying radii of curvature. These geometrical discrepancies imply significant differences in the stress states as compared to planar disk specimens. Therefore, the part geometry inevitably affects the TBC failure mechanisms in the turbine system, and consequently influences TBC durability. Nevertheless, these effects have not been fully explored in the past, despite the anecdotal knowledge which suggests the leading edge of turbine blades to be one of the most common failure/spallation locations. Here in this study, representative TBC systems were deposited onto superalloy disks with flat substrate and rods with curved substrate. The experimental results from FCT suggest TBC durability on rods is significantly lower than when sprayed on disks. Furthermore, the durability of TBCs on rods appears to increase with higher porosity, which is contradictory to reported trends for TBCs on disks. In addition, the effects of various bond coats are not consistent with those observed in disks. To clarify the underlying effects of curved geometries, detailed stress analyses were performed. They revealed a state of thermal stresses which is unique to curved geometries. It was found that TBC on rods experience tensile radial stresses as well as tensile hoop stresses during the cooling. These stresses result in a complex interplay in failure processes in rods, which explains the different observed trends in the durability from those obtained with disks.

36 MATERIALS SCIENCE↗

The dark side of curvature

Geometrical tests such as the combination of the Hubble parameter H(z) and the angular diameter distance d{sub A}(z) can, in principle, break the degeneracy between the dark energy equation of state parameter w(z), and the spatial curvature Ω{sub k} in a direct, model-independent way. In practice, constraints on these quantities achievable from realistic experiments, such as those to be provided by Baryon Acoustic Oscillation (BAO) galaxy surveys in combination with CMB data, can resolve the cosmic confusion between the dark energy equation of state parameter and curvature only statistically and within a parameterized model for w(z). Combining measurements of both H(z) and d{sub A}(z) up to sufficiently high redshifts z ∼ 2 and employing a parameterization of the redshift evolution of the dark energy equation of state are the keys to resolve the w(z)−Ω{sub k} degeneracy.

79 ASTRONOMY AND ASTROPHYSICS↗

Curvature-controlled geometrical lensing behavior in self-propelled colloidal particle systems

In many biological systems, the curvature of the surfaces cells live on influences their collective properties. Curvature should likewise influence the behavior of active colloidal particles. We show using molecular simulation of self-propelled active particles on surfaces of Gaussian curvature (both positive and negative) how curvature sign and magnitude can alter the system's collective behavior. Curvature acts as a geometrical lens and shifts the critical density of motility-induced phase separation (MIPS) to lower values for positive curvature and higher values for negative curvature, which we explain theoretically by the nature of parallel lines in spherical and hyperbolic space. Curvature also fluidizes dense MIPS clusters due to the emergence of defect patterns disrupting the crystalline order inside the clusters. Using our findings, we engineer three confining surfaces that strategically combine regions of different curvature to produce a host of novel dynamical behaviors, including cyclic MIPS on spherocylinders, directionally biased cyclic MIPS on spherocones, and position dependent cluster fluctuations on metaballs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding curvature effects on the magnetization reversal of patterned permalloy Archimedean spirals

Geometric curvature in magnetic systems can induce several unique magnetic interactions, the most notable of which are the curvature induced magnetic anisotropy and the curvature introduced Dzyaloshinski-Moria (DM) like interaction. Of the two, the DM-like interaction is particularly interesting as it provides a unique way to control domain wall motion, which is particularly relevant to the field of spintronics. In this work, we study the effect of geometric curvature on magnetization reversal in Permalloy strips patterned into Archimedean spirals with varying widths. Specifically, we simulated the magnetization reversal of Permalloy strips for several widths ranging from microscale to nanoscale to determine a lengthscale at which the curvature effects are strong. Simulations showed that in the microscale spirals, magnetization reversal primarily occurs through the appearance of magnetization ripple in which domains with reversed magnetization nucleate. On the other hand, the nanoscale spirals showed that reversal primarily proceeded through the motion of domain walls into the arms of the spiral. Our experimental in situ Lorentz transmission electron microscopy data of the microscale spirals, however, showed that magnetization reversal occurred with both mechanisms. At the nanoscale, the effect of local variation of curvature leads to hysteresis loops with stepped behavior. This behavior is characteristic of the curvature induced DM-like interaction affecting domain wall motion in the arms of the nanoscale spirals.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of Electronic Inertia on the Gravito-Electrostatic Sheath Structure Formation

The gravito-electrostatic sheath (GES) model, previously proposed to address the fundamental issues on the surface emission mechanism of outflowing solar plasma on the basis of plasma−wall interaction processes with inertialess electrons on both bounded and unbounded scales, is reformulated in the light of active electron inertial response amid geometrical curvature effects. We accordingly derive the electron population distribution law considering both weak electron inertia and geometrical curvature effects in a new analytic construct coupled with the GES structure equations in a closed form. The analysis shows that the GES characteristics and hence plasma outflow dynamics are noticeably affected because of electron inertia. As a consequence of the electron inertia inclusion in contrast with the previous GES formalism, it is found that the GES width gets reduced (–5%), the sheath boundary gets contracted (–7%), the net current density at the surface gets reduced (–25%), the GES potential enhances (+17%), the transonic horizon decreases (‒35%), self-gravity enhances (+2%), and so forth. The obtained results are in fair accord with the existing model predictions centered around both the earlier GES formalisms and standard fluid-kinetic predictions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Curvature and geometric modules of noncommutative spheres and tori

When considered as submanifolds of Euclidean space, the Riemannian geometry of the round sphere and the Clifford torus may be formulated in terms of Poisson algebraic expressions involving the embedding coordinates, and a central object is the projection operator, projecting tangent vectors in the ambient space onto the tangent space of the submanifold. In this note, we point out that there exist noncommutative analogues of these projection operators, which implies a very natural definition of noncommutative tangent spaces as particular projective modules. These modules carry an induced connection from Euclidean space, and we compute its scalar curvature.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of curvature and rotation on turbulence in the NASA low-speed centrifugal compressor impeller

The flow in the NASA Low-Speed Impeller is affected by both curvature and rotation. The flow curves due to the following: (1) geometric curvature, e.g. the curvature of the hub and shroud profiles in the meridional plane and the curvature of the backswept impeller blades; and (2) secondary flow vortices, e.g. the tip leakage vortex. Changes in the turbulence and effective turbulent viscosity in the impeller are investigated. The effects of these changes on three-dimensional flow development are discussed. Two predictions of the flow in the impeller, one with, and one without modification to the turbulent viscosity due to rotation and curvature, are compared. Some experimental and theoretical background for the modified mixing length model of turbulent viscosity will also be presented.

Moore, Joan G.↗

Curvilinear Magnonic Crystal Based on 3D Hierarchical Nanotemplates

Curvilinear magnetic nanostructures enable control of magnetization dynamics through geometry-induced anisotropy and chiral interactions, as well as magnetic field modulation. In this work, we report a curvilinear magnonic crystal based on large-area square arrays of truncated nanospikes fabricated by conformal coating of 3D hierarchical templates with permalloy thin films. Brillouin light scattering spectroscopy reveals an anisotropic band structure with multiple dispersive and folded Bloch-type dispersive spin-wave modes as well as nondispersive modes exhibiting direction-dependent frequency shifts and intensity asymmetries along lattice principal axes. Finite element micromagnetic simulations indicate that curvature-induced variations of the demagnetizing field govern the magnonic response, enabling the identification of modes propagating in nanochannels and others localized on nanospike apexes or along the ridges connecting adjacent nanospikes. The combination of geometric curvature and optical probing asymmetry produces directional dependence of magnonic bands, establishing 3D hierarchical templates as a versatile platform for curvature-engineered magnonics.

3D hierarchical templates↗

Segmented Ultralight Pre-Aligned Rotor for Extreme-Scale Wind Turbines

To alleviate the mass-scaling issues associated with conventional upwind rotors of extreme-scale turbines, a downwind rotor concept is proposed which employs fixed blade curvature based on force alignment at rated conditions. For a given peak stress constraint, the reduction in downwind cantilever loads allows reduced shell and spar thickness, and thus a reduced blade mass as compared with a conventional upwind rotor, especially as rotor sizes approach extreme-scales. To quantify this mass reduction, a Finite Element Analysis was conducted for a 10 MW rated rotor based on the NREL offshore 5 MW baseline wind turbine. The results show that this 'pre-alignment' yields a net downstream deflection of 32 deg, a downward hub-pitch angle of 6 deg, a 20% increase in blade length (to maintain the same radius as the conventional blade), and a net mass savings of about 50% through decreased shell and spar thicknesses. The pre-alignment may also allow a more straightforward and efficient segmentation of the blade since shear stresses near joints are substantially reduced. Segmenting, in turn, can dramatically reduce costs associated with fabrication, transport and assembly for extreme-scale off-shore systems. The pre-aligned geometric curvature can also help alleviate tower wake effects on the blades since blade tips (where shadow effects can be most problematic) are shifted downstream where the tower wake is weaker. In addition, the portion of the tower that is upstream of the blade tips can be faired with an externally-rotating aerodynamic shroud. Furthermore, the downwind rotor can allow a floating off-shore tri-pod platform to reduce tower weight and yaw-control requirements. A simple economic analysis of the segmented ultralight pre-aligned rotor (SUPAR) concept suggests that the overall system cost savings can be as much as 25%, indicating that more detailed (numerical and experimental) investigations are warranted.

17 WIND ENERGY↗

Reconstructing the membrane detection of a 1D electrostatic-driven MEMS device by the shooting method: convergence analysis and ghost solutions identification

In this paper, in the domain of 1D-membrane micro-electro-mechanical systems in which the electrostatic field is expressed in terms of geometric curvature of the membrane, we present a numerical approach based on shooting techniques to reconstruct the membrane profile in the device in steady-state case. In particular, starting from known results in literature about existence achieved by Schauder–Tychonoff’s fixed point approach and uniqueness, and focusing on two physical–mathematical parameters appropriately indicative of the applied voltage and electromechanical properties of the membrane, respectively, we will discuss what operation parameters (applied voltage, amplitude of electrostatic field) and for which electromechanical membrane characteristic of the device is permitted or not a convergence of the method with respect to analytical results. Finally, we will discuss in detail the detected ghost solutions.

97 MATHEMATICS AND COMPUTING↗

Using EIGER for Antenna Design and Analysis

EIGER (Electromagnetic Interactions GenERalized) is a frequency-domain electromagnetics software package that is built upon a flexible framework, designed using object-oriented techniques. The analysis methods used include moment method solutions of integral equations, finite element solutions of partial differential equations, and combinations thereof. The framework design permits new analysis techniques (boundary conditions, Green#s functions, etc.) to be added to the software suite with a sensible effort. The code has been designed to execute (in serial or parallel) on a wide variety of platforms from Intel-based PCs and Unix-based workstations. Recently, new potential integration scheme s that avoid singularity extraction techniques have been added for integral equation analysis. These new integration schemes are required for facilitating the use of higher-order elements and basis functions. Higher-order elements are better able to model geometrical curvature using fewer elements than when using linear elements. Higher-order basis functions are beneficial for simulating structures with rapidly varying fields or currents. Results presented here will demonstrate curren t and future capabilities of EIGER with respect to analysis of installed antenna system performance in support of NASA#s mission of exploration. Examples include antenna coupling within an enclosed environment and antenna analysis on electrically large manned space vehicles.

Champagne, Nathan J.↗

Accuracy of Gradient Reconstruction on Grids with High Aspect Ratio

Gradient approximation methods commonly used in unstructured-grid finite-volume schemes intended for solutions of high Reynolds number flow equations are studied comprehensively. The accuracy of gradients within cells and within faces is evaluated systematically for both node-centered and cell-centered formulations. Computational and analytical evaluations are made on a series of high-aspect-ratio grids with different primal elements, including quadrilateral, triangular, and mixed element grids, with and without random perturbations to the mesh. Both rectangular and cylindrical geometries are considered; the latter serves to study the effects of geometric curvature. The study shows that the accuracy of gradient reconstruction on high-aspect-ratio grids is determined by a combination of the grid and the solution. The contributors to the error are identified and approaches to reduce errors are given, including the addition of higher-order terms in the direction of larger mesh spacing. A parameter GAMMA characterizing accuracy on curved high-aspect-ratio grids is discussed and an approximate-mapped-least-square method using a commonly-available distance function is presented; the method provides accurate gradient reconstruction on general grids. The study is intended to be a reference guide accompanying the construction of accurate and efficient methods for high Reynolds number applications

Thomas, James↗

Testing flatness of the universe with probes of cosmic distances and growth

When using distance measurements to probe spatial curvature, the geometric degeneracy between curvature and dark energy in the distance-redshift relation typically requires either making strong assumptions about the dark energy evolution or sacrificing precision in a more model-independent approach. Measurements of the redshift evolution of the linear growth of perturbations can break the geometric degeneracy, providing curvature constraints that are both precise and model independent. Future supernova, CMB, and cluster data have the potential to measure the curvature with an accuracy of {sigma}({omega}{sub K})=0.002, without specifying a particular dark energy phenomenology. In combination with distance measurements, the evolution of the growth function at low redshifts provides the strongest curvature constraint if the high-redshift universe is well approximated as being purely matter dominated. However, in the presence of early dark energy or massive neutrinos, the precision in curvature is reduced due to additional degeneracies, and precise normalization of the growth function relative to recombination is important for obtaining accurate constraints. Curvature limits from distances and growth compare favorably to other approaches to curvature estimation proposed in the literature, providing either greater accuracy or greater freedom from dark energy modeling assumptions, and are complementary due to the use of independent data sets. Model-independent estimates of curvature are critical both for testing inflation and for obtaining unbiased constraints on dark energy parameters.

99 GENERAL AND MISCELLANEOUS↗

Geometry-induced potential on a two-dimensional section of a wormhole: Catenoid

We show that a two-dimensional wormhole geometry is equivalent to a catenoid, a minimal surface. We then obtain the curvature-induced geometric potential and show that the ground state with zero energy corresponds to a reflectionless potential. By introducing an appropriate coordinate system we also obtain bound states for different angular momentum channels. Our findings can be realized in suitably bent bilayer graphene sheets with a neck, in a honeycomb lattice with an array of dislocations, or in nanoscale waveguides in the shape of a catenoid.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analytical study of rigidized fibrous materials

Insulation systems composed of micrometer-sized fibers bonded together with small amounts of binder have been developed for aerospace applications. The materials have a very high volid content and low density and can be characterized as a rigidized network of fibers randomly oriented in three-dimensional space. Analytical models suitable for the evaluation of the mechanical behavior of rigidized fibrous materials have been developed. The models treat the material as a space frame structure and includes the effects of joint fixity and fiber curvature. The geometrical and material property variabilities are represented by a number of trusses oriented in five planes. Each truss may have different material and geometric properties. Techniques have been developed to describe the continuous material property and geometry functions as a series of descrete quantities that can be used to describe each of the trusses in the model. Parametric studies were performed to show the influence of material variables on the mechanical behavior of the material. Results of calculations show good agreement with measured properties.

Rosen, B. W.↗

Aerothermal modeling program, phase 1

The combustor performance submodels for complex flows are evaluated. The benchmark test cases for complex nonswirling flows are identified and analyzed. The introduction of swirl into the flow creates much faster mixing, caused by radial pressure gradients and increase in turbulence generation. These phenomena are more difficult to predict than the effects due to geometrical streamline curvatures, like the curved duct, and sudden expansion. Flow fields with swirl, both confined and unconfined are studied. The role of the dilution zone to achieve the turbine inlet radial profile plays an important part, therefore temperature field measurements were made in several idealized dilution zone configurations.

Srinivasan, R.↗