Search NASASearch

SEARCH · Search NASA

Results for “Gravitational wave detection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Narrowing down sources of high-frequency gravitational waves

Detecting gravitational waves above 100 kHz would constitute a major discovery, as any observable signal would have to arise from new physics within the late universe. Although many technologies have been identified to explore this high-frequency regime, the known landscape of promising sources remains extremely sparse. In this work, we aim to rectify this issue by providing model-independent arguments that highlight the most interesting parts of theory space, while remaining agnostic of the specific signal mechanism. For example, energy-conservation implies that gravitational waves detectable by future experiments well above a MHz would most likely have to originate from within the Solar System. Based on these arguments, we also constrain the physical properties of such sources.

Berlin, Asher [Fermilab] (ORCID:0000000211561482)

The gravitational wave detection experiment: Description and anticipated requirements

The experiment to detect gravitational waves in ultraprecise two-way Doppler data is described, as are the anticipated requirements for the Deep Space Network, the spacecraft, and the data processing system. The special feature which allows the usage of ultraprecise Doppler data for the possible detection of gravitational waves is a unique three-pulse signature which is a function of the spacecraft, earth, and gravitational wave propagation direction geometry. The pulses (fractional frequency shifts) result from effects which are conveniently described as follows: Clock speed-up (earth only effect) and buffeting (equal earth and spacecraft effect).

Berman, A. L.

Interferometric Techniques for Gravitational Wave Detection in Space

The Laser Interferometer Space Antenna (LISA) mission will detect gravitational waves from galactic and extragalactic sources, most importantly those involving supermassive black holes. The primary goal of this project is to investigate stability and robustness issues associated with LISA interferometry. We specifically propose to study systematic errors arising from: optical misalignments, optical surface errors, thermal effects and pointing tolerances. This report covers the first fiscal year of the grant, from January 1st to December 31st 1999. We have employed an optical modeling tool to evaluate the effect of misplaced and misaligned optical components. Preliminary results seem to indicate that positional tolerances of one micron and angular tolerances of 0.6 millirad produce no significant effect on the achievable contrast of the interference pattern. This report also outlines research plans for the second fiscal year of the grant, from January 1st to December 31st 2000. Since the work under NAG5-6880 has gone more rapidly than projected, our test bed interferometer is operational, and can be used for measurements of effects that cause beam motion. Hence, we will design, build and characterize a sensor for measuring beam motion, and then install it. We are also planning a differential wavefront sensor based on a quadrant photodiode as a first generation sensor.

Stebbins, Robin T

Lunar Gravitational-wave Detection

Lunar gravitational-wave (GW) detection has been under consideration since Apollo 17 when the Lunar Surface Gravimeter developed under the coordination of Joseph Weber was deployed on the Moon with the goal to observe lunar surface vibrations generated by passing GWs [1]. The experiment did not run with its targeted performance, but even if it had, we know today that it would not have been sensitive enough to detect GW signals. Vibrations caused by GWs are expected to be several orders of magnitude weaker than what the instrument was designed to observe. The main motivation to bring such an experiment to the Moon was that with the extremely low level of seismicity observed with previously deployed Apollo seismometers [2] (see figure 1), Weber suspected that GW signals could be detected.

Jan Harms

Gravitational wave detection with the solar probe: I. Motivation

Questions are posed and answered through discussion of gravitational wave detection with the Solar Probe. Discussed are: (1) what a gravitational wave is; (2) why wave detection is important; (3) what astrophysical information might be learned from these waves; (4) status of attempts to detect these waves; (5) why the Solar Probe is a special mission for detecting these waves; (6) how the Solar Probe's expected sensitivity compares with the strength of predicted gravitational waves; and (7) what gravity wave searchers will do after the Solar Probe.

Thorne, K. S.

Gravitational wave detection with plasma haloscopes

Searches for high frequency gravitational waves using cavities based on the Gertsenshtein effect were recently proposed, building off existing axion dark matter experiments. In particular, the sensitivity of axion dark matter experiments using metamaterial plasmas (tunable plasma haloscopes) to gravitational waves has not been explored in detail. Here we perform a full analysis of gravitational wave detection in plasma haloscopes, showing that the baseline design of experiments such as ALPHA is several orders of magnitude less sensitive than previously thought. We show how simple changes to the experiment can recover that sensitivity and lead to a powerful gravitational wave detector in the 𝒪⁡(10–50) GHz frequency range.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS

Reconstructing the Sky Location of Gravitational-Wave Detected Compact Binary Systems: Methodology for Testing and Comparison

The problem of reconstructing the sky position of compact binary coalescences detected via gravitational waves is a central one for future observations with the ground-based network of gravitational-wave laser interferometers, such as Advanced LIGO and Advanced Virgo. Different techniques for sky localization have been independently developed. They can be divided in two broad categories: fully coherent Bayesian techniques, which are high latency and aimed at in-depth studies of all the parameters of a source, including sky position, and "triangulation-based" techniques, which exploit the data products from the search stage of the analysis to provide an almost real-time approximation of the posterior probability density function of the sky location of a detection candidate. These techniques have previously been applied to data collected during the last science runs of gravitational-wave detectors operating in the so-called initial configuration. Here, we develop and analyze methods for assessing the self consistency of parameter estimation methods and carrying out fair comparisons between different algorithms, addressing issues of efficiency and optimality. These methods are general, and can be applied to parameter estimation problems other than sky localization. We apply these methods to two existing sky localization techniques representing the two above-mentioned categories, using a set of simulated inspiralonly signals from compact binary systems with a total mass of equal to or less than 20M solar mass and nonspinning components. We compare the relative advantages and costs of the two techniques and show that sky location uncertainties are on average a factor approx. equals 20 smaller for fully coherent techniques than for the specific variant of the triangulation-based technique used during the last science runs, at the expense of a factor approx. equals 1000 longer processing time.

technique used

On the heterodyne method of detecting gravitational waves

A mathematical model on the heterodyne method of detecting gravitational waves is presented, using a dumbbell consisting of two masses situated in a plane and a plane-fronted gravitational wave traveling perpendicular to the plane. It is concluded that the detector sensitivity is not likely to be improved without employing very complicated and expensive super low temperature techniques.

Braginsky, V. B.

Cryogenic RF characterization of the MAGO cavity for high-frequency gravitational-wave detection

Superconducting radio-frequency (SRF) cavities are promising resonant sensors for gravitational-wave detection in the kHz-MHz frequency range. We report the cryogenic RF characterization of a prototype superconducting niobium cavity with an unconventional geometry designed for narrow electromagnetic mode separation. Following an adapted surface preparation procedure, cryogenic tests were performed at Fermilab and DESY at temperatures down to 2 K. Mechanical tuning at room temperature achieved a mode splitting of approximately 11 kHz at cryogenic temperature. High electromagnetic quality factors consistent with previous prototype cavities were measured. The measurements further revealed phase transfer characteristics relevant for stable low-level RF control as well as indications of mode coupling potentially caused by one-point multipacting. In addition, first cryogenic measurements of the mechanical eigenmodes yielded mechanical quality factors significantly below commonly assumed theoretical values. These results demonstrate the successful application of established SRF preparation and characterization techniques to a non-standard resonator geometry and provide important experimental input for the development of future SRF-based gravitational-wave detectors.

Dokuyucu, Can [DESY]

Coming Closer to High Frequency Gravitational Wave Detection With MAGO

In the last years, low frequency gravitational waves (GWs) have been consistently measured by the LIGOVirgo collaboration, but little to no attention has been paid to higher frequencies GWs in the range of 10 kHz to 100 MHz, at which confirmation for current theories or even new physics could be hidden. The MAGO 2.0 project aims at filling this gap in the parameter space using superconducting radio-frequency (SRF) cavities. Exploiting the excellent Q-factors of these resonators, we plan to detect tiny harmonic deformations induced by GWs which change the boundary conditions of the oscillating electromagnetic field. We present the results of the first cold tests ran at DESY and FNAL using the cavity prototype built 20 years ago at the end of the MAGO collaboration, characterizing the RF spectrum, Q-factor and surface resistance. Additionally we introduce the mechanical vibration spectrum characterization and the RF response of the cavity with the injection of a “fake GW” signal using piezoelectric actuators.

Marconato, Giovanni [Hamburg U.]

Precise spacecraft tracking using VLBI digital tone extraction for the purpose of gravitational wave detection

The prospect for the detection of a cosmic background of gravitational wave radiation is discussed. Experiments utilizing precise Doppler tracking of interplanetary spacecraft for the purpose of detecting this background are reviewed. Results of a recent experiment are presented which used facilities of NASA's Deep Space Tracking Network and Owens Valley Radio Observatory to track the Voyager spacecraft in an ultra precise manner using two independent hydrogen masers as frequency standards. The present limiting sensitivity of these experiments are believed to be tropospheric and plasma variations affecting the X band microwave signals at periods of between 1,000 - 10,000 seconds duration.

Anderson, A. J.

Using ISS Telescopes for Electromagnetic Follow-up of Gravitational Wave Detections of NS-NS and NS-BH Mergers

The International Space Station offers a unique platform for rapid and inexpensive deployment of space telescopes. A scientific opportunity of great potential later this decade is the use of telescopes for the electromagnetic follow-up of ground-based gravitational wave detections of neutron star and black hole mergers. We describe this possibility for OpTIIX, an ISS technology demonstration of a 1.5 m diffraction limited optical telescope assembled in space, and ISS-Lobster, a wide-field imaging X-ray telescope now under study as a potential NASA mission. Both telescopes will be mounted on pointing platforms, allowing rapid positioning to the source of a gravitational wave event. Electromagnetic follow-up rates of several per year appear likely, offering a wealth of complementary science on the mergers of black holes and neutron stars.

NS-NS and NS-BH mergers

Connecting Current and Future Dual Active Galactic Nucleus Searches to LISA and Pulsar Timing Array Gravitational-wave Detections

Abstract Dual active galactic nuclei (DAGN) mark the observable stage of massive black hole (MBH) pairing during galaxy mergers and are the progenitors of the MBH binaries that generate low-frequency gravitational waves. Using the large-volume ASTRID cosmological simulation, we construct mock DAGN catalogs tailored to the selection functions of current (COSMOS-Web and DESI) and forthcoming (Nancy Grace Roman Space Telescope (Roman) and Lynx X-ray Observatory (Lynx)) surveys, enabling direct comparisons between simulations and observations. With realistic observational selections, ASTRID reproduces the observed dual fractions, projected separations, and host-galaxy properties across redshifts. We predict a substantial population of small-separation (<5 kpc) duals that remain inaccessible to current surveys, demonstrating that the apparent paucity of subkiloparsec systems in COSMOS-Web is primarily a consequence of observational selection rather than an intrinsic absence. Following each simulated dual to coalescence, we show that DAGN are effective tracers of MBH mergers: ∼30%–70% merge within ≲1 Gyr, and 20%–60% of these mergers produce gravitational-wave signals detectable by the Laser Interferometer Space Antenna (LISA). Duals observable with Roman and Lynx are the progenitors of ∼10%–50% of low-redshift LISA sources and contribute ∼30% of the PTA-band stochastic gravitational-wave background. We further identify massive green-valley galaxies hosting moderate-luminosity active galactic nuclei (AGN), together with massive star-forming galaxies containing bright quasars at z > 1, as the environments most likely to host imminent MBH binaries. These results establish a unified cosmological framework connecting DAGN demographics, MBH binary evolution, and gravitational-wave sources, while identifying high-priority targets for coordinated electromagnetic and multimessenger observations in the coming decade.

Chen, Nianyi [Max-Planck-Institut für Astrophysik;

High-frequency gravitational wave detection by the BREAD experiment

The use of experiments searching for light axion dark matter as high-frequency gravitational wave detectors has garnered increasing attention in recent years. We explore the capabilities of the Broadband Reflector Experiment for Axion Detection (BREAD) in probing the GW parameter space and study the directional dependence of its coverage. This detector can investigate frequencies ranging from 0.05 to 200 THz. We find that by employing single photon detectors, BREAD is sensitive to GWs with characteristic strains as low as 10 −21 at 0.1 THz and 10 −25 at 200 THz with a year exposure time, making it competitive with other proposals operating at similar frequencies.

axions

Dark Photon Dark Matter and Low-frequency Gravitational-wave Detection with Gaia-like Astrometry

Astrometric surveys offer us a method for searching for elusive cosmic signatures, such as ultralight dark photon dark matter and gravitational waves (GWs), by observing the temporal change of stars’ apparent locations. The detection capabilities of such surveys rapidly decrease at low frequencies, because the signals become hardly distinguishable from the background motion of stars. In this work, we find that the background motion can be well described by a linear model over time, based on which we propose a linear background subtraction scheme. Compared to the conventional quadratic subtraction, the advantage of linear subtraction emerges within the frequency range below 6 × 10 −9 Hz. Taking dark photons with purely gravitational interactions, dark photons with additional U(1) B or U(1) B−L gauge interactions, and low-frequency GWs as examples, we illustrate that the linear subtraction scheme can result in an enhancement of more than 1 order of magnitude in the exclusion limits of Gaia-like experiments in the low-frequency range.

Astrometry

Gravitational Wave Detection on the Moon and the Moons of Mars

The Moon and the moons of Mars should be extremely quiet seismically and could therefore become sensitive gravitational wave detectors, if instrumented properly. Highly sensitive displacement sensors could be deployed on these planetary bodies to monitor the motion induced by gravitational waves. A superconducting displacement sensor with a 10-kg test mass cooled to 2 K will have an intrinsic instrument noise of 10(exp -16) m Hz(exp -1/2). These sensors could be tuned to the lowest two quadrupole modes of the body or operated as a wideband detector below its fundamental mode. An interesting frequency range is 0.1 to approx. 1 Hz, which will be missed by both the ground detectors on the Earth and LISA and would be the best window for searching for stochastic background gravitational waves. Phobos and Deimos have their lowest quadrupole modes at 0.2 to approx. 0.3 Hz and could offer a sensitivity h(sub min) = 10(exp -22) Hz(exp -1/2) within their resonance peaks, which is within two orders of magnitude from the goal of the Big Bang Observer (BBO). The lunar and Martian moon detectors would detect many interesting foreground sources in a new frequency window and could serve as a valuable precursor for BBO.

Paik, Ho Jung