Search NASA⌕ Search

SEARCH · Search NASA

Results for “H2S”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

The Impact of Surficial Biochar Treatment on Acute H2S Emissions during Swine Manure Agitation before Pump-Out: Proof-of-the-Concept

Acute releases of hydrogen sulfide (H2S) are of serious concern in agriculture, especially when farmers agitate manure to empty storage pits before land application. Agitation can cause the release of dangerously high H2S concentrations, resulting in human and animal fatalities. To date, there is no proven technology to mitigate these short-term releases of toxic gas from manure. In our previous research, we have shown that biochar, a highly porous carbonaceous material, can float on manure and mitigate gaseous emissions over extended periods (days–weeks). In this research, we aim to test the hypothesis that biochar can mitigate H2S emissions over short periods (minutes–hours) during and shortly after manure agitation. The objective was to conduct proof-of-the-concept experiments simulating the treatment of agitated manure. Two biochars, highly alkaline and porous (HAP, pH 9.2) made from corn stover and red oak (RO, pH 7.5), were tested. Three scenarios (setups): Control (no biochar), 6 mm, and 12 mm thick layers of biochar were surficially-applied to the manure. Each setup experienced 3 min of manure agitation. Real-time concentrations of H2S were measured immediately before, during, and after agitation until the concentration returned to the initial state. The results were compared with those of the Control using the following three metrics: (1) the maximum (peak) flux, (2) total emission from the start of agitation until the concentration stabilized, and (3) the total emission during the 3 min of agitation. The Gompertz’s model for determination of the cumulative H2S emission kinetics was developed. Here, 12 mm HAP biochar treatment reduced the peak (1) by 42.5% (p = 0.125), reduced overall total emission (2) by 17.9% (p = 0.290), and significantly reduced the total emission during 3 min agitation (3) by 70.4%. Further, 6 mm HAP treatment reduced the peak (1) by 60.6%, and significantly reduced overall (2) and 3 min agitation’s (3) total emission by 64.4% and 66.6%, respectively. Moreover, 12 mm RO biochar treatment reduced the peak (1) by 23.6%, and significantly reduced overall (2) and 3 min total (3) emission by 39.3% and 62.4%, respectively. Finally, 6 mm RO treatment significantly reduced the peak (1) by 63%, overall total emission (2) by 84.7%, and total emission during 3 min agitation (3) by 67.4%. Biochar treatments have the potential to reduce the risk of inhalation exposure to H2S. Both 6 and 12 mm biochar treatments reduced the peak H2S concentrations below the General Industrial Peak Limit (OSHA PEL, 50 ppm). The 6 mm biochar treatments reduced the H2S concentrations below the General Industry Ceiling Limit (OSHA PEL, 20 ppm). Research scaling up to larger manure volumes and longer agitation is warranted.

Chen, Baitong (ORCID:0000000266071253)↗

Striking luminescence phenomena of carbon dots and their applications as a double ratiometric fluorescence probes for H2S detection

Here, we report some new observations on the luminescence of carbon dots (CDs) that are passivated with polyethylene glycol, and explored them, for the first time, as highly sensitive H2S detection probe. The as-prepared CDs have an ultraviolet (UV) emission at 350 nm and a green emission at 540 nm when excited at 270 nm, but they have only a green emission at 523 nm when excited at 365 nm. As Na2S is added to the CDs, the UV emission decreases gradually, while the green emission increases slightly, and interestingly a new emission appears at 455 nm is increased linearly in intensity with the increase of Na2S concentration. The blue emission at 455 nm is from the intrinsic core of CDs, and the green emissions at 540 or 523 nm are from their surface states, while the UV emission at 350 nm is from the anchored PEG. Both the emission intensity ratios of F-450/F-350 and F-455/F-523 show an excellent linear relationship with the Na2S concentration in the range of 0-800 mu M, and the detection limit estimated from both of them is approximately 7.0 nM, indicating our method is the most sensitive H2S CDs based detection method reported thus far. Furthermore, the detection was tested successfully for H2S imaging in live cells. We propose that the interactions of H2S with the CDs and the anchored ligands, as well as the energy transfer between the ligands and the CDs, are responsible for the luminescence responses for H2S detection. Our studies enrich the world of carbon dots with plenty of potential applications. (C) 2020 Elsevier Ltd. All rights reserved.

Bioimaging↗

Polymeric Membranes for H2S and CO2 Removal from Natural Gas for Hydrogen Production: A Review

Natural gas, an important source of hydrogen, is expected to be crucial in the transition to a hydrogen-based economy. The landscape of the gas processing industry is set to change in the near future with the development of highly acidic sour gas wells. Natural gas purification constitutes a major share of the gas separation membrane market, and the shift to low-quality sour gas wells has been mirrored in the trends of membrane material research. Purification also constitutes the major portion of the cost of natural gas, posing implications for the cost of hydrogen production. This review provides an update on the current state of research regarding polymeric membranes for H2S removal, along with CO2 separation, from natural gas that is used for hydrogen production via steam methane reforming. The challenges of adapting polymeric membranes to ternary H2S/CO2/CH4 separations are discussed in detail. Key polymeric materials are highlighted, and the prospects for their application in H2S removal from natural gas are evaluated. Finally, the growing interest in H2 production from H2S is discussed. Advances in the membrane industry and the emergence of new membrane materials may significantly improve the commercial viability of such processes.

Rao, Shraavya↗

Guest-Host Interactions in Clathrate Hydrates: Benchmark MP2 and CCSD(T)/CBS Binding Energies of CH4, CO2 and H2S in (H2O)20 Cages

We present benchmark binding energies of naturally occurring gas molecules CH4, CO2, and H2S in the small cage, namely the pentagonal dodecahedron (512) (H2O)20, which is one of the constituent cages of the 3 major lattices (structures I, II and H) of clathrate hydrates. These weak interactions require higher levels of electron correlation and converge slowly with increasing basis set to the Complete Basis Set (CBS) limit, necessitating the use of large basis sets up to the augcc- pV5Z and subsequent correction for Basis Set Superposition Error (BSSE). For the host hollow (H2O)20 cages we have identified a most stable isomer with binding energy of -200.8 ± 2.1 kcal/mol at the CCSD(T)/CBS limit (-199.2 ± 0.5 kcal/mol at the MP2/CBS limit). Additionally, we report converged second order Moller-Plesset (MP2) CBS binding energies for the encapsulation of guests in the (H2O)20 cage of -4.3 ± 0.1 for CH4@(H2O)20, -6.6 ± 0.1 for CO2@(H2O)20 and -8.5 ± 0.1 kcal/mol for H2S@(H2O)20, respectively. For CH4@(H2O)20, exhibiting the weakest encapsulation affinity among the three, we report CCSD(T)/aug-cc-pVTZ binding energies and, based on them, a CCSD(T)/CBS estimate of -4.75 ± 0.1 kcal/mol. To the best of our knowledge, the CCSD(T)/aug-cc-pVTZ calculation for CH4@(H2O)20 is the largest one reported to date (168 valence electrons, 1978 basis functions and the correlation of 84 doubly occupied and 1873 virtual orbitals) and required a scalable implementation of the (T) module on 6144 nodes (350208 cores) of the “Cori” supercomputer at the National Energy Research Supercomputing Center (NERSC) for a total execution time of 195 minutes (for the (T) part). These efficient scalable implementations of highly correlated methods offer the capability to obtain long-lasting benchmarks of intermolecular interactions in complex systems. They also provide a path towards parametrizing classical potentials needed to study the dynamical and transport properties in these complex systems as well as assess the accuracy of lower scaling electronic structure methods such as Density Functional Theory (DFT) and MP2 including its spin-biased variants.

Heindel, Joseph↗

Corrosion Behavior of Zinc Cold Spray Coatings in a Simulated Natural Gas Environment Containing H2O, CO2, and H2S

The natural gas transmission pipeline network in the U.S. consists of approximately 300,000 miles, is made mainly of carbon steel, and was installed in the 1950s and 1960s. Understanding the pipeline steel behavior in natural gas will inform new pipeline designs and repurposing of existing pipelines. Sulfide stress cracking (SSC) is a problem for steel pipelines transporting natural gas or CO2 containing partial pressures of H2S higher than 0.3 kPa (0.05 psi). Therefore, the objective of this work is to mitigate internal corrosion in steel pipelines transporting natural gas containing H2S using cold spray coatings.

Belarbi, Zineb↗

Materials Data on H2S by Materials Project

H2S is Fluorite structured and crystallizes in the cubic Fm-3m space group. The structure is three-dimensional. H1+ is bonded to four equivalent S2- atoms to form a mixture of corner and edge-sharing HS4 tetrahedra. All H–S bond lengths are 1.99 Å. S2- is bonded in a body-centered cubic geometry to eight equivalent H1+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on H2S by Materials Project

H2S crystallizes in the triclinic P1 space group. The structure is zero-dimensional and consists of four hydrogen sulfide molecules. H1+ is bonded in a single-bond geometry to one S2- atom. The H–S bond length is 1.36 Å. S2- is bonded in an L-shaped geometry to two equivalent H1+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on H2S by Materials Project

H2S is alpha U structured and crystallizes in the orthorhombic Pbcm space group. The structure is zero-dimensional and consists of eight hydrogen sulfide molecules. H1+ is bonded in a single-bond geometry to one S2- atom. The H–S bond length is 1.36 Å. S2- is bonded in an L-shaped geometry to two equivalent H1+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on H2S by Materials Project

H2S is alpha Samarium-like structured and crystallizes in the tetragonal I4_1/acd space group. The structure is zero-dimensional and consists of sixteen hydrogen sulfide molecules. H1+ is bonded in a single-bond geometry to one S2- atom. The H–S bond length is 1.35 Å. S2- is bonded in an L-shaped geometry to two equivalent H1+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on H2S by Materials Project

H2S is beta-like structured and crystallizes in the orthorhombic Ibca space group. The structure is zero-dimensional and consists of sixteen hydrogen sulfide molecules. H1+ is bonded in a single-bond geometry to one S2- atom. The H–S bond length is 1.35 Å. S2- is bonded in an L-shaped geometry to two equivalent H1+ atoms.

36 MATERIALS SCIENCE↗

Mitigation of Acute Hydrogen Sulfide and Ammonia Emissions from Swine Manure during Three-Hour Agitation Using Pelletized Biochar

The risk of inhalation exposure to elevated concentrations of hydrogen sulfide (H2S) and ammonia (NH3) during the agitation of stored swine manure is high. Once or twice a year, farmers agitate manure before pump-out and application to fields. Agitation of the swine manure causes the short-term releases of highly toxic levels of H2S and NH3. In our previous pilot-scale studies, the biochar powder showed significant mitigation of H2S and NH3 emissions when it was surficially applied to manure immediately before agitation. However, fine biochar powder application poses hazards by itself and may not be practical to apply on a farm scale, especially when livestock and workers are present. We hypothesized that applying pelletized biochar to manure surfaces is just as effective as applying powder to protect farmers and animals from excessive exposure to H2S and NH3. This work reports on the lab-scale proof-of-the-concept trials with biochar pellets on the lab scale. The objective was to compare the biochar pellets and biochar powder on their effectiveness of mitigation on H2S and NH3 gases during 3-h-long swine manure agitation. Three scenarios were compared in (n = 3) trials: (i) control, (ii) 12.5 mm thick surficial application to manure surface of biochar powder, and (iii) an equivalent (by mass) dose of pelletized biochar applied to the manure surface. The biochar powder was bound with 35% (wt) water into ~5 × 10 mm (dia × length) pellets. The biochar powder was significantly (p < 0.05) more effective than the biochar pellets. Still, pellets reduced total H2S and NH3 emissions by ~72% and ~68%, respectively (p = 0.001), compared with ~99% by powder (p = 0.001). The maximum H2S and NH3 concentrations were reduced from 48.1 ± 4.8 ppm and 1810 ± 850 ppm to 20.8 ± 2.95 ppm and 775 ± 182 ppm by pellets, and to 22.1 ± 16.9 ppm and 40.3 ± 57 ppm by powder, respectively. These reductions are equivalent to reducing the maximum concentrations of H2S and NH3 during the 3-h manure agitation by 57% and 57% (pellets) and 54% and 98% (powder), respectively. Treated manure properties hinted at improved nitrogen retention, yet they were not significant due to high variability. We recommend scaling up and trials on the farm-scale level using biochar pellets to assess the feasibility of application to large manure surfaces and techno-economic evaluation.

Chen, Baitong (ORCID:0000000266071253)↗

Activation of the CaR-CSE/H2S pathway confers cardioprotection against ischemia-reperfusion injury

Ischemia-reperfusion (I/R) injury is a multifactorial process triggered when an organ is subjected to transiently reduced blood supply. The result is a cascade of pathological complications and organ damage due to the production of reactive oxygen species following reperfusion. The present study aims to evaluate the role of activated calcium-sensing receptor (CaR)-cystathionine γ-lyase (CSE)/hydrogen sulfide (H2S) pathway in I/R injury. Firstly, an I/R rat model with CSE knockout was constructed. Transthoracic echocardiography, TTC and HE staining were performed to determine the cardiac function of rats following I/R Injury, followed by TUNEL staining observation on apoptosis. Besides, with the attempt to better elucidate how CaR-CSE/H2S affects I/R, in-vitro culture of human coronary artery endothelial cells (HCAECs) was conducted with gadolinium chloride (GdCl3, a CaR agonist), H{sub 2}O{sub 2}, siRNA against CSE (siCSE), or W7 (a CaM inhibitor). The interaction between CSE and CaM was subsequently detected. Plasma oxidative stress indexes, H2S and CSE, and apoptosis-related proteins were all analyzed following cell apoptosis. We found that H2S elevation led to the improvement whereas CSE knockdown decreased cardiac function in rats with I/R injury. Moreover, oxidative stress injury in I/R rats with CSE knockout was aggravated, while the increased expression of H2S and CSE in the aortic tissues resulted in alleviated the oxidative stress injury. Moreover, increased H2S and CSE levels were found to inhibit cell apoptotic ability in the aortic tissues after I/R injury, thus attenuating oxidative stress injury, accompanied by inhibited expression of apoptosis-related proteins. In HCAECs following oxidative stress treatment, siCSE and CaM inhibitor were observed to reverse the protection of CaR agonist. Coimmunoprecipitation assay revealed the interaction between CSE and CaM. Taken together, all above-mentioned data provides evidence that activation of the CaR-CSE/H2S pathway may confer a potent protective effect in cardiac I/R injury.

60 APPLIED LIFE SCIENCES↗

Mitigation of Gaseous Emissions from Swine Manure with the Surficial Application of Biochars

Environmental impact associated with odor and gaseous emissions from animal manure is one of the challenges for communities, farmers, and regulatory agencies. Microbe-based manure additives treatments are marketed and used by farmers for mitigation of emissions. However, their performance is difficult to assess objectively. Thus, comprehensive, practical, and low-cost treatments are still in demand. We have been advancing such treatments based on physicochemical principles. The objective of this research was to test the effect of the surficial application of a thin layer (¼ inches; 6.3 mm) of biochar on the mitigation of gaseous emissions (as the percent reduction, % R) from swine manure. Two types of biochar were tested: highly alkaline and porous (HAP) biochar made from corn stover and red oak (RO), both with different pH and morphology. Three 30-day trials were conducted with a layer of HAP and RO (2.0 & 1.65 kg∙m−2, respectively) applied on manure surface, and emissions of ammonia (NH3), hydrogen sulfide (H2S), greenhouse gases (GHG), and odorous volatile organic compounds (VOCs) were measured. The manure and biochar type and properties had an impact on the mitigation effect and its duration. RO significantly reduced NH3 (19–39%) and p-cresol (66–78%). H2S was mitigated (16~23%), but not significantly for all trials. The phenolic VOCs had relatively high % R in most trials but not significantly for all trials. HAP reduced NH3 (4~21%) and H2S (2~22%), but not significantly for all trials. Significant % R for p-cresol (91~97%) and skatole (74~95%) were observed for all trials. The % R for phenol and indole ranged from (60~99%) and (29~94%) but was not significant for all trials. The impact on GHGs, isobutyric acid, and the odor was mixed with some mitigation and generation effects. However, larger-scale experiments are needed to understand how biochar properties and the dose and frequency of application can be optimized to mitigate odor and gaseous emissions from swine manure. The lessons learned can also be applicable to surficial biochar treatment of gaseous emissions from other waste and area sources.

Meiirkhanuly, Zhanibek↗