Search NASA⌕ Search

SEARCH · Search NASA

Results for “HALOGEN COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Treatment System for Removing Halogenated Compounds from Contaminated Sources

A treatment system and a method for removal of at least one halogenated compound, such as PCBs, found in contaminated systems are provided. The treatment system includes a polymer blanket for receiving at least one non-polar solvent. The halogenated compound permeates into or through a wall of the polymer blanket where it is solubilized with at least one non-polar solvent received by said polymer blanket forming a halogenated solvent mixture. This treatment system and method provides for the in situ removal of halogenated compounds from the contaminated system. In one embodiment, the halogenated solvent mixture is subjected to subsequent processes which destroy and/or degrade the halogenated compound.

Quinn, Jacqueline W.↗

A Survey of Electron Impact Cross-Sections for Halogens and Halogen Compounds of Interest to Plasma Processing

Published electron impact cross section data on halogens Cl2, F2, and halogen containing compounds such as Cx Fy, HCl, Cx Cly Fz are reviewed and critically evaluated based on the information provided by various researchers. The present work reports data on electron impact excitation, ionization, dissociation, electron attachment, electron detachment, and photo detachment. Elastic scattering cross sections and data on bulk properties such as diffusion coefficients in various background gases are also evaluated. Since some of the cross sectional data is derived from indirect measurements such as drift velocity, care has been taken to reconcile the differences among the reported data with due attention to the measurement technique. In conclusion, the processes with no or very limited amount of data and questionable set of data are identified and recommendation for further research direction is made.

Sharma, S. P.↗

Climatic effects due to halogenated compounds in the earth's atmosphere

Using a one-dimensional radiative-convective model, a sensitivity study is performed of the effect of ozone depletion in the stratosphere on the surface temperature. There could be a cooling of the surface temperature by approximately 0.2 K due to chlorofluoromethane-induced ozone depletion at steady state (assuming 1973 release rates). This cooling reduces significantly the greenhouse effect due to the presence of chlorofluoromethanes. Carbon tetrafluoride has a strong nu sub 3 band at 7.8 microns, and the atmospheric greenhouse effect is shown to be 0.07 and 0.12 K/ppbv with and without taking into account overlap with CH4 and N2O bands. At concentrations higher than 1 ppbv, absorption by the nu sub 3 band starts to saturate and the greenhouse effect becomes less efficient.

Wang, W.-C.↗

Biodegradation of Trihalomethanes and Other Halogenated Aliphatic Compounds

The biological dehalogenation of common water pollutants such as trichloromethane (chloroform) and other halogenated aliphatic compounds was the subject of this project. Samples from diverse water environments such as from groundwater contaminated with halogenated compounds and wastewaters from regional treatment plants were studied to identify conditions that favor certain dehalogenation reactions over others. Gene probe analyses of DNA extracted from the dichlormethane-degrading wastewater indicated the presence of the gene coding for dichloromethane dehalogenase, indicating the genetic basis for the dechlorination activity observed. These studies indicate that methanogenic bacteria are the organisms responsible for the chloroform dechlorination. Dechlorination of a common chlorofluorocarbon (CFC-11) was identified in samples taken from a regional aquifer contaminated with halogenated aliphatic compounds.

HALOGENATED ALIPHATC HYDROCARBONS↗

Method and apparatus for vapor detection

The method disclosed herein may be practiced by passing the vapors to be sampled along a path with halogen vapor, preferably chlorine vapor, heating the mixed vapors to halogenate those of the sampled vapors subject to halogenation, removing unreacted halogen vapor, and then sensing the vapors for organic halogenated compounds. The apparatus disclosed herein comprises means for flowing the vapors, both sample and halogen vapors, into a common path, means for heating the mixed vapors to effect the halogenation reaction, means for removing unreacted halogen vapor, and a sensing device for sensing halogenated compounds. By such a method and means, the vapors of low molecular weight hydrocarbons, ketones and alcohols, when present, such as methane, ethane, acetone, ethanol, and the like are converted, at least in part, to halogenated compounds, then the excess halogen removed or trapped, and the resultant vapors of the halogenated compounds sensed or detected. The system is highly sensitive. For example, acetone in a concentration of 30 parts per billion (volume) is readily detected.

Lerner, Melvin↗

Application of Shear Plate Interferometry to Jet Diffusion Flame Temperature Measurements

The recent ban on the production of bromotrifluoromethane (CF3Br) because of its high stratospheric ozone depletion potential has led to interest in finding alternative agents for fire extinguishing applications. Some of the promising alternatives are fluorinated hydrocarbons. A clear understanding of the effects of CF3Br and alternative chemical suppressants on diffusion flames is therefore necessary in the selection of alternative suppressants for use in normal and microgravity. The flame inhibition effects of halogen compounds have been studied extensively in premixed systems. The effect of addition of halocarbons (carbon-halogen compounds) to diffusion flames has been studied experimentally in coflow configurations and in counterflow gaseous and liquid-pool flames. Halogenated compounds are believed to inhibit combustion by scavenging hydrogen radicals to form the relatively unreactive compound HF, or through a catalytic recombination cycle involving HBr to form H2. Comparisons between halogens show that bromine inhibition is significantly more effective than chlorine or fluorine. Although fluorinated compounds are only slightly more effective inhibitors on a mass basis than nitrogen, they are more effective on a volume basis and are easily stored in liquid form. The objectives of this study are (a) to determine the stability limits of laminar jet diffusion flames with respect to inhibitor concentration in both normal and microgravity, and (b) to investigate the structure of halocarbon-inhibited flames. In the initial phase of this project, visual diagnostics were used to observe the structure and behavior of normal and microgravity flames. The initial observations showed significant changes in the structure of the flames with the addition of halocarbons to the surrounding environment, as discussed below. Furthermore, the study established that the flames are more stable relative to the addition of halocarbons in microgravity than in normal gravity. Visual diagnostics of flames are, however, necessarily limited to detection of radiative emission in the visible range, and offer only qualitative information about the nature of the processes in the flame. In particular, the study sought to understand the structure of the inhibitor-perturbed flames with regard to temperature and species concentration in the outer region of the flame. Whereas thermocouple measurements can be used in ground based studies, their implementation in drop-tower rigs is limited. A possible approach to determine the temperature field around the flame is to use interferometric techniques. The implementation and testing of a shear-plate interferometry technique is described below.

VanDerWege, Brad A.↗

Measurements of halogenated organic compounds near the tropical tropopause

The amount of organic chlorine and bromine entering the stratosphere have a direct influence on the magnitude of chlorine and bromine catalyzed ozone losses. Twelve organic chlorine species and five organic bromine species were measured from 12 samples collected near the tropopause between 23.8 deg N and 25.3 deg N during AASE 2. The average mixing ratios of total organic chlorine and total organic bromine were 3.50 +/- 0.06 ppbv and 21.1 +/- 0.8 pptv, respectively. CH3Cl represented 15.1% of the total organic chlorine, with CFC 11 (CCl3F) and CFC 12 (CCl2F2) accounting for 22.6% and 28.2%, respectively, with the remaining 34.1% primarily from CCl4, CH3CCl3, and CFC 113 (CCl2FCClF2). CH3Br represented 54% of the total organic bromine. The 95% confidence intervals of the mixing ratios of all but four of the individual compounds were within the range observed in low and mid-latitude mid-troposphere samples. The four compounds with significantly lower mixing ratios at the tropopause were CHCl3, CH2Cl2, CH2Br2, and CH3CCl3. The lower mixing ratios may be due to entrainment of southern hemisphere air during vertical transport in the tropical region and/or to exchange of air across the tropopause between the lower stratosphere and upper troposphere.

Schauffler, S. M.↗

Measurements of Halogenated Organic Compounds near the Tropical Tropopause

The amount of organic chlorine and bromine entering the stratosphere have a direct influence on the magnitude of chlorine and bromine catalyzed ozone losses. Twelve organic chlorine species and five organic bromine species were measured from 12 samples collected near the tropopause between 23.8 deg N and 25.3 deg N during AASE 2. The average mixing ratios of total organic chlorine and total organic bromine were 3.50 +/- 0.06 ppbv and 21.1 +/- 0.8 pptv, respectively. CH3Cl represented 15.1% of the total organic chlorine, with CFC 11 (CCl3F) and CFC 12 (CCl2F2) accounting for 22.6% and 28.2%, respectively, with the remaining 34.1% primarily from CCl4, CH3CCl3, and CFC 113 (CCl2FCClF2). CH3Br represented 54% of the total organic bromine. The 95% confidence intervals of the mixing ratios of all but four of the individual compounds were within the range observed in low and mid-latitude midtroposphere samples. The four compounds with significantly lower mixing ratios at the tropopause were CHCl3, CH2Cl2, CH2Br2, and CH3CCl3. The lower mixing ratios may be due to entrainment of southern hemisphere air during vertical transport in the tropical region and/or to exchange of air across the tropopause between the lower stratosphere and upper troposphere.

Schauffler, S. M.↗

A Simulation of Bromoform's Contribution to Stratospheric Bromine

Many chlorinated and brominated compounds that are inert in the troposphere are destroyed in the stratosphere and act as an in-situ source of stratospheric reactive chlorine and bromine. Other halogenated compounds that are reactive in the troposphere might contribute to the stratosphere's halogen budget in two ways. First, like their unreactive companions, rapid convective transport might carry them to the upper troposphere and make them available for subsequent advection by the mean circulation into the stratosphere before they are oxidized or photolyzed. Second, it is more likely that they are destroyed in the troposphere, and the chlorine and bromine that is released might then be transported to the stratosphere. We evaluate the relative influence of these processes on stratospheric bromine in a three-dimensional chemistry and transport model which simulates the distribution of bromoform (CHBr3). CHBr3 is parameterized as a short-lived, ocean-surface source gas whose destruction by photolysis and reaction with hydroxyl (OH) in the troposphere and stratosphere yields inorganic bromine (Br(sub y)). Many of the observed features of CHBr3 are simulated well, and comparisons with observations are used to show that the model represents aspects of transport in the upper troposphere and lower stratosphere that are critical to the evaluation. In particular, the model maintains the observed troposphere-stratosphere distinctness in transport pathways and reproduces the observed seasonal dependence of the mixture of air in the middle- and high-latitude lowermost stratosphere. We estimate that adding CHBr3 to models which already include the long-lived organic brominated compounds (halons and methyl bromide) will increase the simulated stratospheric mass of Br(sub y) by about 15 percent. In-situ stratospheric destruction of CHBr3 produces Br(sub y) in amounts which are comparable to that transported into the stratosphere after photolysis and oxidation of CHBr3 in the troposphere. In our simulations the mass of Br(sub y) produced from the destruction of CHBr3 does not exceed the mass of Br(sub y) produced from the destruction of the long-lived compounds at any level in the stratosphere. However, Br(sub y) from the loss of CHBr3 accounts for approximately one-third of the total Br(sub y) in the lowest kilometer of the stratosphere.

Nielsen, J. Eric↗

Influence of probe contamination on recombination of atomic hydrogen

Atomic hydrogen concentration profiles were measured through a screen-stabilized one-dimensional propane/oxygen front using a specially modified electron spin resonance (ESR) spectrometer. The ESR line occurring at 3075.5 G at 9261.2 MHz was monitored in the presence and absence of various halogenated hydrocarbons. A significant cumulative decrease in peak intensity occurred with addition of any halogenated compound. Further results suggest that the effect is due to inhibitor action on the transport tube walls followed by changes in atomic hydrogen interaction with the walls, and that hydrogen decay is nonlinear in the halogenated tube.

Collins, L. W.↗

Chemical Loss of Polar Ozone: Present Understanding and Remaining Uncertainties

Not long after the discovery of the Antarctic ozone hole, it was established that halogen compounds, supplied to the atmosphere mainly by anthropogenic activities, are the primary driver of polar ozone loss. We will briefly review the chemical mechanisms that cause polar ozone loss and the early evidence showing the key role played by anthropogenic halogens. Recently, stratospheric halogen loading has leveled off, due to adherence to the Montreal Protocol and its amendments that has essentially banned CFCs (chlorofluorocarbons) and other halocarbons. We will describe recent reports of the first stage of recovery of the Antarctic ozone hole (e.g., a statistically significant slowing of the downward trend), associated with the leveling off of stratospheric halogens. Despite this degree of understanding, we will discuss the tendency of photochemical models to underestimate the observed rate of polar ozone loss and a hypothesis that has recently been put forth that might resolve this discrepancy. Finally, we will briefly discuss chemical loss of Arctic ozone, which

climate change↗

Solar-pumped electronic-to-vibrational energy transfer lasers

The possibility of using solar-pumped lasers as solar energy converters is examined. The absorbing media considered are halogens or halogen compounds, which are dissociated to yield excited atoms, which then hand over energy to a molecular lasing medium. Estimates of the temperature effects for a Br2-CO2-He system with He as the cooling gas are given. High temperatures can cause the lower energy levels of the CO2 laser transition to be filled. The inverted populations are calculated and lasing should be possible. However, the efficiency is less than 0.001. Examination of other halogen-molecular lasant combinations (where the rate coefficients are known) indicate efficiencies in all cases of less than 0.005.

Harries, W. L.↗

Lunar Sulfur Capture System

The Lunar Sulfur Capture System (LSCS) protects in situ resource utilization (ISRU) hardware from corrosion, and reduces contaminant levels in water condensed for electrolysis. The LSCS uses a lunar soil sorbent to trap over 98 percent of sulfur gases and about two-thirds of halide gases evolved during hydrogen reduction of lunar soils. LSCS soil sorbent is based on lunar minerals containing iron and calcium compounds that trap sulfur and halide gas contaminants in a fixed-bed reactor held at temperatures between 250 and 400 C, allowing moisture produced during reduction to pass through in vapor phase. Small amounts of Earth-based polishing sorbents consisting of zinc oxide and sodium aluminate are used to reduce contaminant concentrations to one ppm or less. The preferred LSCS configuration employs lunar soil beneficiation to boost concentrations of reactive sorbent minerals. Lunar soils contain sulfur in concentrations of about 0.1 percent, and halogen compounds including chlorine and fluorine in concentrations of about 0.01 percent. These contaminants are released as gases such as H2S, COS, CS2,HCl, and HF during thermal ISRU processing with hydrogen or other reducing gases. Removal of contaminant gases is required during ISRU processing to prevent hardware corrosion, electrolyzer damage, and catalyst poisoning. The use of Earth-supplied, single-use consumables to entirely remove contaminants at the levels existing in lunar soils would make many ISRU processes unattractive due to the large mass of consumables relative to the mass of oxygen produced. The LSCS concept of using a primary sorbent prepared from lunar soil was identified as a method by which the majority of contaminants could be removed from process gas streams, thereby substantially reducing the required mass of Earth-supplied consumables. The LSCS takes advantage of minerals containing iron and calcium compounds that are present in lunar soil to trap sulfur and halide gases in a fixedbed reactor downstream of an in-ISRU process such as hydrogen reduction. The lunar-soil-sorbent trap is held at a temperature significantly lower than the operating temperature of the hydrogen reduction or other ISRU process in order to maximize capture of contaminants, but is held at a high enough temperature to allow moisture to pass through without condensing. The lunar soil benefits from physical beneficiation to remove ultrafine particles (to reduce pressure drop through a fixed bed reactor) and to upgrade concentrations of iron and/or calcium compounds (to improve reactivity with gaseous contaminants).

Berggren, Mark↗

First spectra of chlorine, bromine, and iodine in the 1.8- to 4.0-micron region.

Use of liquid-nitrogen-cooled lead sulfide detectors to extend observations of the first spectra of the halogens in the infrared region as far as 4.0 microns. Descriptions, comprising wavelengths, wave numbers, intensities, and classifications, are presented that serve to close the gap between the upper wavelength limit of the detailed published analyses of these spectra at about 2.5 microns and the groups of recently classified lines near 4 microns, and also to report newly observed lines in the 1.8- to 2.5-micron region made accessible by detectors of improved response characteristics. Listed wavelengths of observed and identified lines are calculated from established values of the energy levels. The descriptions should facilitate the identification of halogen lines in mixed spectra excited in electrodeless tubes containing halogen compounds.

Humphreys, C. J.↗

International Conference on Problems Related to the Stratosphere

The conference focused on four main areas of investigation: laboratory studies and stratospheric chemistry and constituents, sources for and chemical budget of stratospheric halogen compounds, sources for and chemical budget of stratospheric nitrous oxide, and the dynamics of decision making on regulation of potential pollutants of the stratosphere. Abstracts of the scientific sessions of the conference as well as complete transcriptions of the panel discussions on sources for an atmospheric budget of holocarbons and nitrous oxide are included. The political, social and economic issues involving regulation of potential stratospheric pollutants were examined extensively.

Huntress, W., Jr.↗