Search NASA⌕ Search

SEARCH · Search NASA

Results for “HELIOTRON”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Application of beam emission spectroscopy to NBI plasmas of Heliotron J

This paper describes the application of the beam emission spectroscopy (BES) to Heliotron J, having the nonsymmetrical helical-magnetic-axis configuration. The spectral and spatial profile of the beam emission has been estimated by the numerical calculation taking the collisional excitation processes between plasmas (electrons/ions) and beam atoms. Two sets of the sightlines with good spatial resolution are presented. One is the optimized viewing chords which have 20 sightlines and observe the whole plasma region with the spatial resolution {Delta}{rho} less than {+-}0.055 using the newly designed viewing port. The other is 15 sightlines from the present viewing port of Heliotron J for the preliminary measurement to discuss the feasibility of the density fluctuation measurement by BES. The beam emission has been measured by a monochromator with a CCD camera. A good consistency has been obtained between the spectral profiles of the beam emission measured by the monochromator and the beam emission spectrum deduced by the model calculation. An avalanche photodiode with an interference filter system was also used to evaluate the signal-to-noise (S/N) ratio of the beam emission in the present experimental setup. The modification of the optical system is being planned to improve the S/N ratio, which will enable us to estimate the density fluctuation in Heliotron J.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Multichannel Langmuir probe for turbulence study in Heliotron J

New multichannel Langmuir probe system was developed and installed to Heliotron J. The objective of the new probe is to characterize basic turbulence property and the resulting transport in advanced helical configuration. The probe developed here consists of four sets of triple probe and one pin for floating potential measurement. Initial experiments in neutral beam heating plasma were conducted and fluctuation profile of radial and poloidal electric fields and Reynolds stress were estimated. For precise evaluation of the electric fields and Reynolds stress, a technique to compensate radial change of tilt angle between probe array and magnetic surface was proposed and applied to the initial results obtained in edge region of Heliotron J where the complicated magnetic structure exists.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impact of Magnetic Field Configuration on Heat Transport in Stellarators and Heliotrons

We assess the magnetic field configuration in modern fusion devices by comparing experiments with the same heating power, between a stellarator and a heliotron. The key role of turbulence is evident in the optimized stellarator, while neoclassical processes largely determine the transport in the heliotron device. Gyrokinetic simulations elucidate the underlying mechanisms promoting stronger ion scale turbulence in the stellarator. Similar plasma performances in these experiments suggests that neoclassical and turbulent transport should both be optimized in next step reactor designs.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of Rotational Transform on Thermal Transport in Stellarator–Heliotron Plasmas on LHD

Experimental evidence that indicates a positive effect of rotational transform on thermal transport has been shown for electron cyclotron heated plasmas on large helical device (LHD). Although this positive dependence was suggested by earlier scaling studies on energy confinement time, there was a concern that rotational transform is strongly correlated with another major non-dimensional parameter, that is, aspect ratio, in stellarator–heliotron systems. A careful experiment to exclude correlation between these two non-dimensional parameters was carried out on LHD by means of combining helical coil pitch control and limiter insertion. Plasmas with similar aspect ratio but different rotational transform have been compared in terms of global energy confinement time and local heat diffusivity. Energy confinement time increases with the rotational transform. Also the comparison of plasmas dimensionally similar in terms of normalized gyro-radius, collisionality, normalized pressure and aspect ratio has indicated that thermal transport improves with rotational transform. Since the plasmas studied here are dominated by turbulent transport rather than neoclassical transport, the identified feature, common to toroidal plasmas with tokamak, will stimulate the challenge to resolve the origin of the favorable effect of poloidal field and the compatibility with drift turbulence theory.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Recent Progress on Toroidal Nonneutral Plasmas Confined on Heliotron Magnetic Surfaces

Firstly, non-constant space potential {phi}{sub s} and electron density n{sub e} on magnetic surfaces of helical nonneutral plasmas are observed in CHS experiments. The variation of {phi}{sub s} has grown with increasing electron injection energy, implying that thermal effects are important when considering the force balance along magnetic field lines. These observations confirm the existence of plasma equilibrium having non-constant {phi}{sub s} and n{sub e} on magnetic surfaces of helical nonneutral plasmas. Secondly, outward orbits that extend to inward part of closed helical vacuum magnetic region are found in three dimensional calculations which take into account two experimental findings. The pitch angle of electron injected into the stochastic magnetic region is scattered considerably due to the presence of shifted self space potential {phi}{sub s}. Eventually, the injected electron turns to be a helically trapped particle, and start an inward movement along one of the |B{sub min}| contours. Once penetrating deeply, the electron can never escape from the last closed flux surface because the negative {phi}{sub s} acts as a potential barrier. Thirdly, first data obtained from toroidal nonneutral plasmas confined on the quasi-poloidally symmetric magnetic surfaces having a helical-axis is described. It shows that externally produced plasmas are successfully observed, and moreover, the non-constant {phi}{sub s} and n{sub e} of helical nonneutral plasmas are ensured in the Heliotron J experiments, as well.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Interaction between static magnetic islands and interchange modes in a straight heliotron plasma with high resistivity

Fundamental mechanism of the nonlinear interaction between static magnetic islands generated by an external field and a resistive interchange mode is investigated in a straight heliotron plasma with high resistivity by using a numerical method based on the reduced magnetohydrodynamics equations. The behavior of the magnetic islands is examined at the steady state after the nonlinear saturation of the interchange mode. The width and the phase of the magnetic islands are changed by the mode evolution. These changes are almost determined by the linear combination of the two perturbed poloidal magnetic fluxes, the flux imposed externally and the flux attributed to the interchange mode, in spite of the fact that the changes result from the nonlinear process. It is also obtained that the amount of the local change of the pressure at the resonant surface in the saturation state depends on the phase of the static magnetic islands.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Design of a new high repetition rate Nd:YAG Thomson scattering system for Heliotron J

A new high repetition rate Nd:YAG Thomson scattering system has been designed for the Heliotron J helical device. The main purpose of installing the new Thomson scattering system is an investigation of an improved confinement physics such as the edge transport barrier (H-mode) or the internal transport barrier of the helical plasma. The system has 25 spatial points with {approx}10 mm resolution. Two high repetition Nd:YAG lasers (>550 mJ at 50 Hz) realize the measurement of the time evolution of the plasma profile with 10 ms time interval. Scattered light is collected with a large concave mirror (D=800 mm, f/2.25) with a solid angle of {approx}100 msr. The laser beam is injected from obliquely downward to upward, and obliquely backscattered light is detected (scattering angle is 20 deg.). Model simulation of the polychromator shows the measurable electron temperature and density range are from10 eV to 10 keV, >5x10{sup 18} m{sup -3} within 3% error for the temperature measurement, respectively.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Density fluctuation measurements using beam emission spectroscopy on Heliotron J

This paper describes the measurement of the density fluctuation using beam emission spectroscopy in Heliotron J, having the non-symmetrical helical-magnetic-axis configuration. In order to optimize the sightlines, the numerical calculations are carried out to estimate the spatial resolution and the observation location. When a tangential neutral beam is used as diagnostic one, suitable sightlines from the newly installed diagnostic port are selected whose spatial resolution {Delta}{rho} is less than {+-}0.07 over the entire plasma region. Modification of the interference filter and the detection systems enables us to measure the radial profile of the density fluctuation. Each of the three coherent modes due to the fast-ion-driven magnetohydrodynamic instabilities has different radial structure of the density fluctuation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Equilibrium and stability in a heliotron with anisotropic hot particle slowing-down distribution

The equilibrium and linear fluid Magnetohydrodynamic (MHD) stability in an inward-shifted large helical device heliotron configuration are investigated with the 3D ANIMEC and TERPSICHORE codes, respectively. A modified slowing-down distribution function is invoked to study anisotropic pressure conditions. An appropriate choice of coefficients and exponents allows the simulation of neutral beam injection in which the angle of injection is varied from parallel to perpendicular. The fluid stability analysis concentrates on the application of the Johnson-Kulsrud-Weimer energy principle. The growth rates are maximum at <{beta}>{approx}2%, decrease significantly at <{beta}>{approx}4.5%, do not vary significantly with variations of the injection angle and are similar to those predicted with a bi-Maxwellian hot particle distribution function model. Stability is predicted at <{beta}>{approx}2.5% with a sufficiently peaked energetic particle pressure profile. Electrostatic potential forms from the MHD instability necessary for guiding centre orbit following are calculated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

First measurement of time evolution of electron temperature profiles with Nd:YAG Thomson scattering system on Heliotron J

A Nd:YAG Thomson scattering system has been developed for Heliotron J. The system consists of two 550 mJ 50 Hz lasers, large collection optics, and 25 radial channel (∼1 cm spatial resolution) interference polychromators. This measurement system achieves a S/N ratio of ∼50 for low-density plasma (n{sub e} ∼ 0.5 × 10{sup 19} m{sup −3}). A time evolution of electron temperature profiles was measured with this system for a high-intensity gas-puff (HIGP) fueling neutral-beam-injection plasma. The peripheral temperature of the higher-density phase after HIGP recovers to the low-density pre-HIGP level, suggesting that improving particle transport in the HIGP plasma may be possible.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Neoclassical parallel flow calculation in the presence of external parallel momentum sources in Heliotron J

A moment approach to calculate neoclassical transport in non-axisymmetric torus plasmas composed of multiple ion species is extended to include the external parallel momentum sources due to unbalanced tangential neutral beam injections (NBIs). The momentum sources that are included in the parallel momentum balance are calculated from the collision operators of background particles with fast ions. This method is applied for the clarification of the physical mechanism of the neoclassical parallel ion flows and the multi-ion species effect on them in Heliotron J NBI plasmas. It is found that parallel ion flow can be determined by the balance between the parallel viscosity and the external momentum source in the region where the external source is much larger than the thermodynamic force driven source in the collisional plasmas. This is because the friction between C{sup 6+} and D{sup +} prevents a large difference between C{sup 6+} and D{sup +} flow velocities in such plasmas. The C{sup 6+} flow velocities, which are measured by the charge exchange recombination spectroscopy system, are numerically evaluated with this method. It is shown that the experimentally measured C{sup 6+} impurity flow velocities do not contradict clearly with the neoclassical estimations, and the dependence of parallel flow velocities on the magnetic field ripples is consistent in both results.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of beam emission spectroscopy for turbulence transport study in Heliotron J

This paper describes the development study of the beam emission spectroscopy (BES) for the turbulent transport study in Heliotron J. Modification of the sightlines (10 × 4 for edge and 10 × 2 for edge) enables us to obtain 2-dimensional BES imaging. The cooling effect on the reduction in the electrical noise of avalanche photodiode (APD) assembly has been investigated using a refrigerant cooling system. When the temperature of the APD element has set to be −20 °C, the electrical noise can be reduced more than 50%. The measurement error of the phase difference in the case of low signal level has been tested by two light-emitting diode lamps. The APD cooling has an effect to improve the measurement error at the low signal level of APD.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Faraday-cup-type lost fast ion detector on Heliotron J

A Faraday-cup type lost-fast ion probe (FLIP) has been designed and installed in Heliotron J for the purpose of the studies of interaction between fast ions and MHD instabilities. The FLIP can measure the co-going fast ions whose energy is in the range of 1.7–42.5 keV (proton) and pitch angle of 90{sup ∘}–140{sup ∘}, especially for fast ions having the injection energy of neutral beam injection (NBI). The FLIP successfully measured the re-entering passing ions and trapped lost-fast ions caused by fast-ion-driven energetic particle modes in NBI heated plasmas.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Observation of a beam-driven low-frequency mode in Heliotron J

A low-frequency electromagnetic mode (LF-mode) has been observed in a stellarator/heliotron device, Heliotron J. The LF-mode is observed only in neutral beam heated plasmas with a co-current, which increases the rotational transform. The observed LF-mode peaks at rho = 0.86–0.91, where rho = r/a is the normalized minor radius. The LF-mode propagates in the ion diamagnetic drift direction, and the poloidal mode number is m ~ 6–8, determined with a combination of Mirnov coil arrays and 2D fast camera measurement. A high m number induces significant Doppler shift from the background ion flow. The frequency is corrected with both E × B rotation and the ion diamagnetic flow. The corrected frequency is almost consistent with the beta-induced Alfvén eigenmode gap evaluated with the STELLGAP code, although very close to the accumulation point. The mode could also be a global Alfvén eigenmode.

BAE↗

Analysis of the ECH effect on EPM/AE stability in Heliotron J plasma using a Landau closure model

The aim of the present study is to analyze the effect of the electron cyclotron heating (ECH) on the linear stability of Alfvén eigenmodes (AEs) and energetic particle modes (EPMs) triggered by energetic ions in Heliotron J plasma. The analysis is performed using the FAR3d code that solves a reduced MHD model to describe the thermal plasma coupled with a gyrofluid model for the energetic particle (EP) species. The simulations reproduce the AE/EPM stability trends observed in the experiments as the electron temperature (T e ) increases, modifying the thermal plasma β, EP β and EP slowing-down time. Particularly, the $n/m = 1/2$ EPM and $2/4$ Global AE are stabilized in the low-bumpiness (LB) configuration due to an enhancement of the continuum, finite Larmor radius and e-i Landau damping effects as the thermal β increases. On the other hand, a larger ECH injection power cannot stabilize the AE/EPM in medium-bumpiness and high-bumpiness (HB) configurations because the damping effects are weaker compared to the LB case, unable to balance the further destabilization induced by an enhanced EP resonance as the EP slowing-down time and EP β increases with T e .

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Electron Temperature Distribution Measurements in Clouds of Polystyrene Pellets Ablating in LHD Heliotron Plasma

Two methods for measuring the spatial distribution of the temperature of electrons in a cloud near a polystyrene pellet that ablates in LHD heliotron plasma are described. The first method is based on measuring the ratio of the local emission-coefficient values at wavelengths of 486 ± 5 nm (the H{sub β} line) and 630 ± 5 nm (continuum). The second (new) method is based on the measurement of radiation distributions of the H{sub β} line in the direction along the magnetic field. Both the methods use an assumption about the partial local thermodynamic equilibrium in the cloud and show close results. It is shown for the first time that the temperature of cloud electrons increases from 0.8 eV in the immediate vicinity of the pellet surface to 6.0–7.0 eV at a distance of 6–8 mm from the pellet in the direction along the magnetic field, which agrees with the experimentally observed longitudinal distribution of the H{sub β} radiation in the cloud.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modeling of the ECCD injection effect on the Heliotron J and LHD plasma stability

The aim of the study is to analyze the stability of the energetic particle modes (EPM) and Alfven Eigenmodes (AE) in Helitron J and LHD plasma if the electron cyclotron current drive (ECCD) is applied. Additionally, the analysis is performed using the code FAR3d that solves the reduced MHD equations describing the linear evolution of the poloidal flux and the toroidal component of the vorticity in a full 3D system, coupled with equations of density and parallel velocity moments for the energetic particle (EP) species, including the effect of the acoustic modes. The Landau damping and resonant destabilization effects are added via the closure relation. The simulation results show that the n = 1 EPM and n = 2 global AE (GAE) in Heliotron J plasma can be stabilized if the magnetic shear is enhanced at the plasma periphery by an increase (co-ECCD injection) or decrease (ctr-ECCD injection) of the rotational transform at the magnetic axis ($\rlap{-} \iota_{0}$). In the ctr-ECCD simulations, the EPM/AE growth rate decreases only below a given $\rlap{-} \iota_{0}$, similar to the ECCD intensity threshold observed in the experiments. In addition, ctr-ECCD simulations show an enhancement of the continuum damping. The simulations of the LHD discharges with ctr-ECCD injection indicate the stabilization of the n = 1 EPM, n = 2 toroidal AE (TAE) and n = 3 TAE, caused by an enhancement of the continuum damping in the inner plasma leading to a higher EP β threshold with respect to the co- and no-ECCD simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of supersonic molecular-beam injection on edge fluctuation and particle transport in Heliotron J

Edge fluctuation in a supersonic molecular-beam injection (SMBI) fueled plasma has been measured using an electrostatic probe array. After SMBI, the plasma stored energy (W{sub p}) temporarily decreased then started to increase. The local plasma fluctuation and fluctuation induced particle transport before and after SMBI have been analyzed. In a short duration (∼4 ms) just after SMBI, the density fluctuation of broad-band low frequency increased, and the probability density function (PDF) changed from a nearly Gaussian to a positively skewed non-Gaussian one. This suggests that intermittent structures were produced due to SMBI. Also the fluctuation induced particle transport was greatly enhanced during this short duration. About 4 ms after SMBI, the low frequency broad-band density fluctuation decreased, and the PDF returned to a nearly Gaussian shape. Also the fluctuation induced particle transport was reduced. Compared with conventional gas puff, W{sub p} degradation window is very short due to the short injection period of SMBI. After this short degradation window, fluctuation induced particle transport was reduced and W{sub p} started the climbing phase. Therefore, the short period of the influence to the edge fluctuation might be an advantage of this novel fueling technique. On the other hand, although their roles are not identified at present, coherent MHD modes are also suppressed as well by the application of SMBI. These MHD modes are thought to be de-exited due to a sudden change of the edge density and/or excitation conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗