Search NASA⌕ Search

SEARCH · Search NASA

Results for “HEXAGONAL SYSTEMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Phase-field model of deformation twin-grain boundary interactions in hexagonal systems

Here, a phase-field model for describing dynamic interactions between deformation twins and grain boundaries in a hexagonal close packed (HCP) metal is established. It is applied to simulating the coupled evolution mechanisms of grains and twins in magnesium (Mg) by probing the transmission of $\{10\bar{1}2\}$ deformation twins across grain boundaries. We analyze the effect of the strain relaxation near a grain boundary, which is related to the geometric compatibility arising from the misorientation angle between adjoining grains. Phase-field simulations demonstrate that twin transmission across a grain boundary into a neighboring grain leads to grain boundary migration towards the neighboring grain with a reduced grain boundary width. The preferred nucleation site of new twin variant in the neighboring grain is related to the elastic interaction energy distribution. These predicted transmission behaviors agree well with existing experimental observations and molecular dynamics simulations. By analyzing set of systematic phase-field simulation results, we establish a rotation-angle-related twin variant selection rule for analyzing the transmission of $\{10\bar{1}2\}$ deformation twins across grain boundaries in Mg and its alloys.

36 MATERIALS SCIENCE↗

Physical properties of single crystalline R Mg 2 Cu 9 ( R = Y , Ce - Nd , Gd - Dy , Yb ) and the search for in-plane magnetic anisotropy in hexagonal systems

Single crystals of R Mg 2 Cu 9 (R=Y, Ce-Nd, Gd-Dy, Yb) were grown using a high-temperature solution growth technique and were characterized by measurements of room-temperature x-ray diffraction, temperature-dependent specific heat, and temperature- and field-dependent resistivity and anisotropic magnetization. YMg 2 Cu 9 is a non-local-moment-bearing metal with an electronic specific heat coefficient, γ ~ 15 mJ/mol K 2 . Yb is divalent and basically non-moment-bearing in YbMg2Cu9. Ce is trivalent in CeMg 2 Cu 9 with two magnetic transitions being observed at 2.1 K and 1.5 K. PrMg 2 Cu 9 does not exhibit any magnetic phase transition down to 0.5 K. The other members being studied ( R = Nd, Gd-Dy) all exhibit antiferromagnetic transitions at low temperatures ranging from 3.2 K for NdMg 2 Cu 9 to 11.9 K for TbMg 2 Cu 9 . Whereas GdMg 2 Cu 9 is isotropic in its paramagnetic state due to zero angular momentum ( L = 0), all the other local-moment-bearing members manifest an anisotropic, planar magnetization in their paramagnetic states. To further study this planar anisotropy, detailed angular-dependent magnetization was carried out on magnetically diluted (Y 0.99 Tb 0.01 )Mg 2 Cu 9 and (Y 0.99 Dy 0.01 )Mg 2 Cu 9 . Despite the strong, planar magnetization anisotropy, the in-plane magnetic anisotropy is weak and field-dependent. Finally, a set of crystal electric field parameters are proposed to explain the observed magnetic anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The Effects of Morphology and Hydration on Anion Transport in Self-Assembled Nanoporous Membranes

Ordered nanoporous polymer membranes offer opportunities for systematically probing the mechanisms of ion transport under confinement and for realizing useful materials for electrochemical devices. Here, we examine the impact of morphology and ion hydration on the transport of hydroxide and bromide anions in nanostructured polymer membranes with 1 nm scale pores. We use aqueous lyotropic self-assembly of an amphiphilic monomer, with a polymerizable surfactant to create direct hexagonal (H I ) and gyroid mesophases. UV-induced cross-linking leads to the formation of nanoporous polymers with water continuous channels. The membranes are mechanically robust and chemically durable, resisting degradation during extended exposure to 1 M NaOH solutions. We use a combination of electrochemical impedance spectroscopy, pulsed-field gradient NMR spectroscopy, and molecular simulations to elucidate anion and water transport. The as-prepared hexagonal systems display higher conductivity and lower activation energies for both anions relative to the gyroid system. When compared at equivalent hydration, however, gyroid and hexagonal membranes show similar activation energies, with nearly identical conductivities at ambient temperatures. Both ionic conductivity and water diffusivity increase with increasing hydration. Here, the water uptake as a function of relative humidity for the hexagonal and gyroid mesophases ultimately dictates the water diffusion and magnitude of the ionic conductivity, with the hexagonal system showing overall higher capacity for hydration and thus faster ion transport. The durability of these materials under aggressive alkaline conditions and their relatively high hydroxide ion conductivity suggest that these nanostructured polymers could be of interest as membranes for alkaline fuel cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, crystal structure and optical properties of the new lead fluoride borate-Pb{sub 2}BO{sub 3}F

A new compound, Pb{sub 2}BO{sub 3}F, has been grown by high temperature solution method from the PbO-PbF{sub 2}-B{sub 2}O{sub 3} system for the first time. The crystal structure of this compound has been identified by single crystal X-ray diffraction analysis. It crystallizes in the hexagonal system, space group P6{sub 3}/m (No. 176) with unit-cell parameters a=7.2460(3) A, c=14.5521(17) A, Z=6, V=661.69(9) A{sup 3}. Its structure was solved by the direct methods and refined to R{sub 1}=0.0163 and wR{sub 2}=0.0367. The structure of Pb{sub 2}BO{sub 3}F consists of the distorted PbO{sub 3}F{sub 2} groups and BO{sub 3} triangles, which are all symmetric with each other in the gestalt structure to the extent that the Pb{sub 2}BO{sub 3}F compound crystallizes in the symmetric space group. The powder X-ray diffraction pattern of the Pb{sub 2}BO{sub 3}F has been measured. The BO{sub 3} functional groups presented in the sample were identified by FTIR spectrum. The DTA curve of Pb{sub 2}BO{sub 3}F suggests that Pb{sub 2}BO{sub 3}F melts congruently at 448 deg. C. - Graphical Abstract: The Pb atoms are in the five coordination environments bonded to three O atoms and two F atoms to make up the distortional PbO{sub 3}F{sub 2} polyhedra. Every six PbO{sub 3}F{sub 2} polyhedra are connected by one F(1) atom to form the symmetrical structure, and then the distortion of the PbO{sub 3}F{sub 2} polyhedra is offset. Highlights: > A new compound, Pb{sub 2}BO{sub 3}F, has been grown by high temperature solution method from the PbO-PbF{sub 2}-B{sub 2}O{sub 3} system for the first time. > It crystallizes in the hexagonal system, space group P6{sub 3}/m (No. 176) with unit-cell parameters a=7.2460(3) A, c=14.5521(17) A, Z=6, V=661.69(9) A{sup 3}. > UV-vis-NIR Diffuse-Reflectance spectrum shows that its ultraviolet cutoff edge is about 288 nm. > DTA curve of Pb{sub 2}BO{sub 3}F suggests that Pb{sub 2}BO{sub 3}F melts congruently at 448 deg. C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigation of upconversion and downconversion fluorescence emissions from β-NaLn1F{sub 4}:Yb{sup 3+}, Ln2{sup 3+} (Ln1 = Y, Lu; Ln2 = Er, Ho, Tm, Eu) hexagonal disk system

Graphical abstract: Well-defined β-NaLn1F4:Yb{sup 3+}, Ln2{sup 3+} (Ln1 = Y, Lu; Ln2 = Er, Ho, Tm, Eu) hexagonal thin disks with a simple and user-friendly hydrothermal approach by using sodium citrate as a shape modifier. Much stronger UC and DC fluorescence emissions were observed in NaLuF{sub 4}-based hexagonal disks than that for NaYF{sub 4} counterparts. The strength of hypersensitive transitions is mainly attributed to the decrease of local symmetry Ln-F bond lengths in β-NaLuF{sub 4}. It will show a great potential in improving near-infrared conversion efficiency of silicon solar cells and removable sub-micro luminescent platforms. - Highlights: • Regular hexagonal disks (NaLnF{sub 4}) were synthesized by a simple hydrothermal method. • Much stronger UC and DC emissions were observed in NaLuF{sub 4}-based disks. • Stronger fluorescence emissions in NaLuF{sub 4}-based disks were explained reasonably. • NaLuF{sub 4}-based disks can act as a removable luminescent platform for nano-assembly. • NaLuF{sub 4}-based disks can be applied in improving efficiency of solar cells. - Abstract: Uniform hexagonal β-NaLn1F{sub 4}:Yb{sup 3+}, Ln2{sup 3+} (Ln1 = Y, Lu; Ln2 = Er, Ho, Tm, Eu) disks were synthesized with hydrothermal method in which the sodium citrate was used as a shape modifier. The experimental observation indicated that both upconversion and downconversion fluorescence emissions were significantly stronger in β-NaLuF{sub 4} than that for β-NaYF{sub 4}. It was found that the stronger hypersensitive transitions were mainly due to the increase of J–O parameter (Ω{sub 2}) in β-NaLuF{sub 4} host, while the stronger insensitive transitions were mainly caused by the stronger overlap of electron cloud that was induced by the decrease of Ln-F bond lengths. Additionally, the larger absorption strength in the near-infrared region is another important factor for the stronger fluorescence emissions. The current research has a great potential in improving near-infrared conversion efficiency of silicon solar cells.

36 MATERIALS SCIENCE↗

Domain configurations in dislocations embedded hexagonal manganite systems: From the view of graph theory

Topological defects and their interactions often arouse multiple types of emerging phenomena from edge states in Skyrmions to disclination pairs in liquid crystals. In hexagonal manganites, partial edge dislocations, a prototype topological defect, are ubiquitous and they significantly alter the topologically protected domains and their behaviors. In this work, combining electron microscopy experiment and graph theory analysis, we report a systematic study of the connections and configurations of domains in this dislocation embedded system. Rules for domain arrangement are established. The dividing line between domains, which can be attributed by the strain field of dislocations, is accurately described by a genus model from a higher dimension in the graph theory. In conclusion, our results open a door for the understanding of domain patterns in topologically protected multiferroic systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and characterizations of two anhydrous metal borophosphates: M{sup III}{sub 2}BP{sub 3}O{sub 12} (M=Fe, In)

Two members of M{sup III}{sub 2}BP{sub 3}O{sub 12} borophosphates, namely Fe{sub 2}BP{sub 3}O{sub 12} and In{sub 2}BP{sub 3}O{sub 12}, were synthesized by the solid-state method and characterized by the X-ray single crystal diffraction, the powder diffraction and the electron microscopy. They both crystallize in the hexagonal system, space group P6(3)/m (no. 176) and feature 3D architectures, build up of the M{sub 2}O{sub 9} units and B(PO{sub 4}){sub 3} groups via sharing the corners; however, they are not isomorphic for the different crystallographically distinct atomic positions. Optical property measurements of both compounds and magnetic susceptibility measurements of Fe{sub 2}BP{sub 3}O{sub 12} also have been performed. Moreover, in order to gain further insights into the relationship between physical properties and band structure of the M{sup III}{sub 2}BP{sub 3}O{sub 12} borophosphates, theoretical calculations based on density functional theory (DFT) were performed using the total-energy code CASTEP. - Graphical abstract: Two anhydrous metal borophosphates of M{sup III}{sub 2}BP{sub 3}O{sub 12} (M=Fe, In) have been prepared and characterized. They both crystallize in the hexagonal system, space group P6(3)/m (no. 176) and feature 3D architectures build up of the M{sub 2}O{sub 9} units and B(PO{sub 4}){sub 3} groups via sharing the corners, but they are not isomorphic for the different crystallographically distinct atomic positions.

36 MATERIALS SCIENCE↗

Structural and opto-electronic properties of 2D AlSb monolayer

We have investigated dielectric function related optical properties such as refractive index, absorption coefficient of two-dimensional hexagonal system of aluminum antimony (AlSb). We have also find structural and electronic properties of AlSb which show direct/indirect band gap with planar structure, employing the density functional theory using the generalized gradient approximation (GGA) given by Perdew-Burke-Ernzerhof (PBE) functional for exchange-correlation potential. The refractive index n(ω) increases with frequency in the near infrared region but in visible region n(ω) increasing after decrease.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Facile combustion synthesis of ZnO nanoparticles using Cajanus cajan (L.) and its multidisciplinary applications

Graphical abstract: Facile combustion synthesis of ZnO nanoparticles using Cajanuscajan (L.) and its multidisciplinary applications.Zinc oxide nanoparticles were successfully synthesized by solution combustion method (SCM) using pigeon pea as a combustible fuel for the first time. The as-prepared product shows good photocatalytic, dielectric, antibacterial, electrochemical properties. - Highlights: • ZnO Nps were synthesized via combustion method using pigeon pea as a fuel. • The structure of the product was confirmed by XRD technique. • The morphology was confirmed by SEM and TEM images. • The as-prepared product shown good photocatalytic activity, dielectric property. • It has also shown good antibacterial and electrochemical properties. - Abstract: Zinc oxide nanoparticles (ZnO Nps) were successfully synthesized by solution combustion method (SCM) using pigeon pea as a fuel for the first time. X-Ray diffraction pattern reveals that the product belongs to hexagonal system. FTIR spectrum of ZnO Nps shows the band at 420 cm{sup −1} associated with the characteristic vibration of Zn–O. TEM images show that the nanoparticles are found to be ∼40–80 nm. Furthermore, the as-prepared ZnO Nps exhibits good photocatalytic activity for the photodegradation of methylene blue (MB), indicating that they are indeed a promising photocatalytic semiconductor. The antibacterial properties of ZnO nanopowders were investigated by their bactericidal activity against four bacterial strains.

36 MATERIALS SCIENCE↗

Synthesis, crystal structure and electrical proprieties of new phosphate KCoP{sub 3}O{sub 9}

Crystals of new tricyclophosphate KCoP{sub 3}O{sub 9} have been grown from solid state reaction and characterized by single crystal X-ray diffraction. KCoP{sub 3}O{sub 9} crystallizes in the hexagonal system, space group P6{sup ¯}c2, with a=6.616 (7) Å; c=9.788 (3) Å; V=371.06 (13) Å{sup 3}, Z=2. The final agreement factors are R=0.014, ωR=0.038, S(F{sup 2})=1.231. The structure of the title compound can be described as a three-dimensional framework built up of corner sharing CoO{sub 6} and PO{sub 4} polyhedra containing wide tunnels oriented along [001] direction and others, less broad, along [100] and [010] directions. The structural model was validated by bond valence sum (BVS) and charge distribution (CD) methods. Ball milling was used to reduce the particles sizes of the synthesized powder. At the optimal sintering temperature of 800 °C, a relative density of 85% was obtained. The microstructure was characterized by scanning electron microscopy. The electrical conductivity was 8.4×10{sup −7} S cm{sup −1} and 1.7×10{sup −4} S cm{sup −1} at 480 °C and 680 °C respectively. The activation energy deduced from the slope is 2.2 eV at low temperature region and 1.2 eV at high temperature region. The BVS model is extended to simulate the ionic migration pathways of alkali cations in the anionic framework. The BVS calculation shows one-dimensional pathways migration along c-axis. - Graphical abstract: 1D pathways link K atoms along c-axis with bond valence mismatch |ΔV(K)|=0.8 v.u. - Highlights: • A new single crystal KCoP{sub 3}O{sub 9} was grown by solid state reaction and its structure determined by single-crystal X-ray diffraction. • The purity polycrystalline of KCoP{sub 3}O{sub 9} sample was verified by Rietveld refinement. • The CIS measurements were optimized and the obtained spectra were fitted by electrical equivalent circuits. • The conduction pathways for the K{sup +} cations are simulated by means of the bond valence sum model.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structure and conductivity of sulfate and phosphate doped SrCoO{sub 3}

In this paper we report the successful incorporation of sulfate and phosphate into SrCoO{sub 3} leading to a change from a 2H- to a 3C-perovskite polymorph. Structural characterization by neutron diffraction showed extra weak peaks related to oxygen vacancy ordering, and these could be indexed on an expanded tetragonal cell, containing two inequivalent Co sites, similar to previously reported for Sb doped SrCoO{sub 3}. Conductivity measurements on the doped systems showed a large enhancement compared to the undoped hexagonal system, consistent with corner-sharing of CoO{sub 6} octahedra for the former. Further work on the doped samples shows, however, that they are metastable, transforming back to the hexagonal cell on annealing at intermediate temperatures. The incorporation of Fe was shown, however, to improve the stability at intermediate temperatures, and these co-doped phases also showed high conductivities. - Graphical abstract: Phosphate/sulfate doping in SrCoO{sub 3-y} leads to a structural change to a 3C-perovskite framework, with an accompanying large increase in conductivity. Highlights: > Sulfate and phosphate are successfully doped into SrCoO{sub 3}. > The doping stabilises the 3C-perovskite framework. > The doped samples show high conductivities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

FINAL REPORT - Development of High Pressure Hydrogen Storage Tank for Storage and Gaseous Truck Delivery

The “Development of High Pressure Hydrogen Storage Tanks for Storage and Gaseous Truck Delivery” project [DE-FG36-08GO18062] was initiated on 01 July 2008. Hexagon Lincoln (then Lincoln Composites) received grant funding from the U.S. Department of Energy to support the design and development of an improved bulk hauling and storage solution for hydrogen in terms of cost, safety, weight and volumetric efficiency. The development of this capability required parallel development and qualification of large all-composites pressure vessels, a custom ISO container to transport and store said tanks, and performance of trade studies to identify optimal operating pressure for the system. Qualification of the 250 bar TITAN® module was completed in 2009 with supervision from the American Bureau of Shipping [ABS], and the equipment has been used internationally for bulk transportation of fuel gases since 2010. Phase 1 of the project was successfully completed in 2012 with the issuance of USDOT SP 14951, the special permit authorizing the manufacture, marking, sale and use of TITAN® Mobile Pipeline® equipment in the United States. The introduction of tube trailers with light weight composite tankage has meant that 2 to 3 times as much gaseous fuel can be transported with each trip. This increased hauling efficiency offers dramatically reduced operating costs and has enabled a profitable business model for over-the-road compressed natural gas delivery. The economic drivers of this business opportunity vary from country to country and region to region, but in many places gas distribution companies have realized profitable operations. Additional testing was performed in 2015 to characterize hydrogen-specific operating protocols for use of TITAN® systems in CHG service at 250 bar. This program demonstrated that existing compression and decompression methodologies can efficiently and safely fill and unload lightweight bulk hauling systems. Hexagon Lincoln and U.S. DOE agreed to continue into Phase 2 of the project without pursuing the development of higher pressure capabilities as originally planned. At 250 bar, development of equipment for hydrogen transport is supported by strong activity in the adjacent natural gas transportation sector. Trade studies performed since 2011 indicate optimization of hauling efficiency and system cost for hydrogen transport at about 350 bar (5076 psi). However, due to reduced efficiency of compression of natural gas above 250 bar, 350 bar operation is not an attractive option for natural gas transportation. The CHG market is not developed at this time, and it is difficult to forecast the arrival of significant revenues. On the investment side, the cost to fully qualify a large tank module at 350 bar is estimated at $3MM to $5MM. There is insufficient CHG market definition to support a stand-alone business case for this investment without near term revenue in the adjacent CNG transportation market. Therefore development of a 350 bar TITAN® system was deferred and not pursued under this project. Hexagon Lincoln continues to support the development of tankage and equipment for operation at 350 bar and above; with 700 bar vehicle tanks and 950 bar tanks for ground storage applications. Phase 2 activities were focused on reducing system cost, increasing system capacity, increasing system safety and characterization of polymer material performance specific to hydrogen pressure vessel usage. With the successful launch of TITAN® modules and trailers in natural gas transportation, over 600 units have been produced through the end of 2016, resulting in improved purchasing power for raw materials and manufactured components. This has allowed Hexagon Lincoln to approach the current project goals for system cost. At $590/kg of compressed hydrogen delivered, the system cost of the baseline TITAN® module is below the project’s 2015 target of $730/kg H2 delivered, and very close to the project’s 2020 target of $575/kg H2 delivered. [Based on product pricing in 1Q2017.] Emphasis was placed on configuration of larger capacity systems within the vehicle weights and dimensions allowed on federal and state highways in the United States and other countries. These activities resulted in the design and development of integrated tube trailer systems that have increased delivery capacities by 45%. The hydrogen delivery capacity of our largest system is 845 kg, exceeding the project’s 2015 target of 700 kg H2 delivered. Emerging technologies offering improvement of the safety systems used on the equipment were investigated, with particular focus on improving the reliability and cost of the emergency venting system for fire protection. Finally, investment in our materials laboratory improved detection and characterization of hydrogen-induced damage in polymer materials, supporting the development of operational protocols to avoid damage to pressure vessel liners and valve components.

08 HYDROGEN↗

Room temperature mechanosynthesis of the La{sub 1-x}Sr{sub x}MnO{sub 3{+-}{delta}} (0{<=}x{<=}1) system and microstructural study

Monophase nanocrystalline powders belonging to the La{sub 1-x}Sr{sub x}MnO{sub 3{+-}{delta}} system (0{<=}x{<=}1) with a perovskite structure have been obtained by mechanochemistry synthesis using a planetary ball milling equipment from La{sub 2}O{sub 3}, SrO, and Mn{sub 2}O{sub 3} mixtures. The solid state reaction was complete after one hour of milling treatment. For all the compositional range, the diffraction domain was very small and the structure appeared as a pseudo cubic perovskite. After annealing at 1100 Degree-Sign C under static air, the symmetry evolution due to the La substitution by Sr was analyzed by X-ray and electron diffraction. Samples with x=0, 0.25, 0.5, and 0.75 were assigned to R-3c space group (1 6 7) in the rhombohedral system and perovskite structure. However, the symmetry of the last term of the system (x=1), SrMnO{sub 3{+-}{delta}} sample, changed to P6{sub 3}/mmc space group (1 9 4) in the hexagonal system. The terms with x=0.8, 0.85, and 0.9 presented mainly rhombohedral symmetry. - Graphical abstract: SEM micrographs corresponding to milled (M) and Heated (H) samples: LaMnO{sub 3{+-}{delta}}(M1 and H1) La{sub 0.75}Sr{sub 0.25}MnO{sub 3{+-}{delta}}(M2 and H2,) and SrMnO{sub 3{+-}{delta}}(M8 and H8). Highlights: Black-Right-Pointing-Pointer Synthesis of La{sub 1-x}Sr{sub x}MnO{sub 3{+-}{delta}} by mechanochemistry, a very simple and scalable method. Black-Right-Pointing-Pointer System with rhombohedral perovskite structure forming a solid solution till x=0.9. Black-Right-Pointing-Pointer Powder material with nanometer character that reduces the sinterization temperature. Black-Right-Pointing-Pointer Appropriate Microstructure for cathode electrodes to built SOFCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Configurational-Bias Monte Carlo Back-Mapping Algorithm for Efficient and Rapid Conversion of Coarse-Grained Water Structures into Atomistic Models

Coarse-grained molecular dynamics (MD) simulations represent a powerful approach to simulate longer time scale and larger length scale phenomena than those accessible to all-atom models. The gain in efficiency, however, comes at the cost of atomistic details. The reverse transformation, also known as back-mapping, of coarse grained beads into their atomistic constituents represents a major challenge. Most existing approaches are limited to specific molecules or specific force-fields and often rely on running a long time atomistic MD of the back-mapped configuration to arrive at an optimal solution. Such approaches are problematic when dealing with systems with high diffusion barriers. Here, we introduce a new extension of the configurational-bias-Monte-Carlo (CBMC) algorithm, which we term the crystalline-configurational-bias-Monte-Carlo (C-CBMC) algortihm, that allows rapid and efficient conversion of a coarse-grained model back into its atomistic representation. Although the method is generic, we use a coarse-grained water model as a representative example and demonstrate the back-mapping or reverse transformation for model systems ranging from the ice-liquid water interface to amorphous and crystalline ice configurations. A series of simulations using the TIP4P/Ice model are performed to compare the new CBMC method to several other standard Monte Carlo and Molecular Dynamics based back-mapping techniques. In all the cases, the C-CBMC algorithm is able to find optimal hydrogen bonded configuration many thousand evaluations/steps sooner than the other methods compared within this paper. For crystalline ice structures such as a hexagonal, cubic, and cubic-hexagonal stacking disorder structures, the C-CBMC was able to find structures that were between 0.05 and 0.1 eV/water molecule lower in energy than the ground state energies predicted by the other methods. Detailed analysis of the atomistic structures show a significantly better global hydrogen positioning when contrasted with the existing simpler back-mapping methods. The error in the RDFs of backmapped relative to reference configuration for the CCBMC, MD, and MC were found to be 6.9, 8.7, and 12.9 respectively for the hexagonal system. For the cubic system the relative error of the RDFs for the CCBMC, MD, and MC were found to be 18.2, 34.6, and 39.0 respectively. Finally, our results demonstrate the efficiency and efficacy of our new back-mapping approach, especially for crystalline systems where simple force-field based relaxations have a tendency to get trapped in local minima.

74 ATOMIC AND MOLECULAR PHYSICS↗

Velocity field calculation for non-orthogonal numerical grids

Computational grids containing cell faces that do not align with an orthogonal (e.g. Cartesian, cylindrical) coordinate system are routinely encountered in porous-medium numerical simulations. Such grids are referred to in this study as non-orthogonal grids because some cell faces are not orthogonal to a coordinate system plane (e.g. xy, yz or xz plane in Cartesian coordinates). Non-orthogonal grids are routinely encountered at the Savannah River Site in porous-medium flow simulations for Performance Assessments and groundwater flow modeling. Examples include grid lines that conform to the sloping roof of a waste tank or disposal unit in a 2D Performance Assessment simulation, and grid surfaces that conform to undulating stratigraphic surfaces in a 3D groundwater flow model. Particle tracking is routinely performed after a porous-medium numerical flow simulation to better understand the dynamics of the flow field and/or as an approximate indication of the trajectory and timing of advective solute transport. Particle tracks are computed by integrating the velocity field from cell to cell starting from designated seed (starting) positions. An accurate velocity field is required to attain accurate particle tracks. However, many numerical simulation codes report only the volumetric flowrate (e.g. PORFLOW) and/or flux (flowrate divided by area) crossing cell faces. For an orthogonal grid, the normal flux at a cell face is a component of the Darcy velocity vector in the coordinate system, and the pore velocity for particle tracking is attained by dividing by water content. For a non-orthogonal grid, the flux normal to a cell face that lies outside a coordinate plane is not a true component of velocity with respect to the coordinate system. Nonetheless, normal fluxes are often taken as Darcy velocity components, either naively or with accepted approximation. To enable accurate particle tracking or otherwise present an accurate depiction of the velocity field for a non-orthogonal grid, Darcy velocity components are rigorously derived in this study from normal fluxes to cell faces, which are assumed to be provided by or readily computed from porous-medium simulation code output. The normal fluxes are presumed to satisfy mass balances for every computational cell, and if so, the derived velocity fields are consistent with these mass balances. Derivations are provided for general two-dimensional quadrilateral and three-dimensional hexagonal systems, and for the commonly encountered special cases of perfectly vertical side faces in 2D and 3D and a rectangular footprint in 3D.

97 MATHEMATICS AND COMPUTING↗

Resonant excitation of intense acoustic waves in crystals

The resonant excitation of an intense elastic wave through nonspecular reflection of a special pump wave in a crystal is described. The choice of the plane and angle of incidence is dictated by the requirement that the excited reflected wave be close to the bulk eigenmode with its energy flow along a free boundary. The resonance parameters have been found for a medium with an arbitrary anisotropy. General relations are concretized for monoclinic, rhombic, and hexagonal systems. A criterion is formulated for an optimal selection of crystals in which the resonant reflection is close to the conversion one, when almost all of the energy from the incident beam of the pump wave falls into the near-surface narrow high-intensity reflected beam. Estimates and illustrations are given for such crystals as an example. The intensity of the reflected beam increases with its narrowing, but its diffraction divergence also increases with this narrowing. Nevertheless, the intensity of the beam can be increased by a factor of 5-10 at sufficiently high frequencies while keeping its divergence at an acceptable level. Amplification by two orders of magnitude can be achieved by compressing the beam in two dimensions through its double reflection.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal and electronic structures of the new quaternary RCr₃Si₂C (R=Y, Gd–Tm, Lu, U) compounds

Nine new quaternary intermetallic RCr₃Si₂C (R=Y, Gd–Tm, Lu, U) compounds have been synthesized and characterized by both powder and single-crystal X-ray diffraction. These compounds crystallize in the hexagonal system with space group P6/mmm and lattice parameters a~9 Å and c~4 Å. Single-crystal X-ray diffraction refinement evidences a new type-structure closely related to the YCo₃Ga₂-type. Electronic structure properties and crystal stability of real YCr₃Si₂C against hypothetical YCr₃Si₂ are discussed in view of the Korringa–Kohn–Rostoker calculations, accounting for models with different atomic occupancy on selected sites as well as emphasizing the role of carbon in stabilization of YCr₃Si₂C compound. Highlights: • Crystal structure determination of the new intermetallic YCr₃Si₂C compound. • New type-structure closely related to the YCo₃Ga₂-type. • Theoretical study of the structural stability by electronic structure calculations. • Crystal structure characterization of the entire RCr₃Si₂C series.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗