Search NASA⌕ Search

SEARCH · Search NASA

Results for “HONEYCOMB STRUCTURES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Thermal Inspection of Composite Honeycomb Structures

Composite honeycomb structures continue to be widely used in aerospace applications due to their low weight and high strength advantages. Developing nondestructive evaluation (NDE) inspection methods are essential for their safe performance. Pulsed thermography is a commonly used technique for composite honeycomb structure inspections due to its large area and rapid inspection capability. Pulsed thermography is shown to be sensitive for detection of face sheet impact damage and face sheet to core disbond. Data processing techniques, using principal component analysis to improve the defect contrast, are presented. In addition, limitations to the thermal detection of the core are investigated. Other NDE techniques, such as computed tomography X-ray and ultrasound, are used for comparison to the thermography results.

Zalameda, Joseph N.↗

Template-free preparation and morphology evolution of (Cu, Ni) honeycomb structure via etching additive manufactured Fe-Cu-Ni alloy

Highlights: • (Cu, Ni) honeycomb structure with pore size of ~11 μm and wall thickness of ~200 nm was prepared. • The morphology evolution and the potential formation mechanism of the (Cu, Ni) honeycomb structure were investigated. • A new template-free method of additive manufacturing combined with etching was proposed to prepare ordered porous structure. • This work provides important insights into the preparation of ordered porous structure without template. - Abstract: Metallic ordered porous structures have attracted increasing attention due to their wide range of applications, but their preparation is usually accompanied with the employing of consumable templates. The development of template-free method to prepare metallic ordered porous structure can significantly reduce the cost as well as streamline the procedures. In the present work, a new template-free method of additive manufacturing combined with etching was proposed to prepare ordered porous structures. (Cu, Ni) honeycomb structure with pore size of ~11 μm and wall thickness of ~200 nm was successfully prepared from the Fe-Cu-Ni precursor alloy. The morphology evolution and the potential formation mechanism of the (Cu, Ni) honeycomb structure were studied. This work provides important insights into the preparation of ordered metallic porous structure without template.

36 MATERIALS SCIENCE↗

Ceramic honeycomb structures and the method thereof

The subject invention pertains to a method of producing an improved composite-composite honeycomb structure for aircraft or aerospace use. Specifically, the subject invention relates to a method for the production of a lightweight ceramic-ceramic composite honeycomb structure, which method comprises: (1) pyrolyzing a loosely woven fabric/binder having a honeycomb shape and having a high char yield and geometric integrity after pyrolysis at between about 700 and 1,100 C; (2) substantially evenly depositing at least one layer of ceramic material on the pyrolyzed fabric/binder of step (1); (3) recovering the coated ceramic honeycomb structure; (4) removing the pyrolyzed fabric/binder of the structure of step (3) by slow pyrolysis at between 700 and 1000 C in between about a 2 to 5% by volume oxygen atmosphere for between about 0.5 and 5 hr.; and (5) substantially evenly depositing on and within the rigid hollow honeycomb structure at least one additional layer of the same or a different ceramic material by chemical vapor deposition and chemical vapor infiltration. The honeycomb shaped ceramic articles have enhanced physical properties and are useful in aircraft and aerospace uses.

Riccitiello, Salvatore R.↗

Ceramic Honeycomb Structures and Method Thereof

The present invention relates to a method for producing ceramic articles and the articles, the process comprising the chemical vapor deposition (CVD) and/or chemical vapor infiltration (CVI) of a honeycomb structure. Specifically the present invention relates to a method for the production of a ceramic honeycomb structure, including: (a) obtaining a loosely woven fabric/binder wherein the fabric consists essentially of metallic, ceramic or organic fiber and the binder consists essentially of an organic or inorganic material wherein the fabric/binder has and retains a honeycomb shape, with the proviso that when the fabric is metallic or ceramic the binder is organic only; (b) substantially evenly depositing at least one layer of a ceramic on the fabric/binder of step (a); and (c) recovering the ceramic coated fiber honeycomb structure. In another aspect, the present invention relates to a method for the manufacture of a lightweight ceramic-ceramic composite honeycomb structure, which process comprises: (d) pyrolyzing a loosely woven fabric a honeycomb shaped and having a high char yield and geometric integrity after pyrolysis at between about 700 degrees and 1,100 degrees Centigrade; (e) substantially evenly depositing at least one layer of ceramic material on the pyrolyzed fabric of step (a); and (f) recovering the coated ceramic honeycomb structure. The ceramic articles produced have enhanced physical properties and are useful in aircraft and aerospace uses.

Cagliostro, Domenick E.↗

Hollow needle used to cut metal honeycomb structures

Hollow needle tool cuts metal honeycomb structures without damaging adjacent material. The hollow needle combines an electrostatic discharge and a stream of oxygen at a common point to effect rapid, accurate metal cutting. The tool design can be varied to use the hollow needle principle for cutting a variety of shapes.

Gregg, E. A.↗

Crystallography of rare galactic honeycomb structure near supernova 1987a

Near supernova 1987a, the rare honeycomb structure of 20-30 galactic bubbles measures 30 x 90 light years. Its remarkable regularity in bubble size suggests a single-event origin which may correlate with the nearby supernova. To test the honeycomb's regularity in shape and size, the formalism of statistical crystallography is developed here for bubble sideness. The standard size-shape relations (Lewis's law, Desch's law, and Aboav-Weaire's law) govern area, perimeter and nearest neighbor shapes. Taken together, they predict a highly non-equilibrium structure for the galactic honeycomb which evolves as a bimodal shape distribution without dominant bubble perimeter energy.

Noever, David A.↗

Titanium honeycomb structure

A brazed titanium honeycomb sandwich system for supersonic transport wing cover panels provides the most efficient structure spanwise, chordwise, and loadwise. Flutter testing shows that high wing stiffness is most efficient in a sandwich structure. This structure also provides good thermal insulation if liquid fuel is carried in direct contact with the wing structure in integral fuel tanks.

Davis, R. A.↗

Metastable piezoelectric group-IV monochalcogenide monolayers with a buckled honeycomb structure

Multiple two-dimensional materials are being naïvely termed stable on the grounds of displaying phonon dispersions with no negative frequencies and of not collapsing on molecular dynamics calculations at fixed volume. But, if these phases do not possess the smallest possible structural energy, how does one understand and establish their actual meta stability? To answer this question, twelve two-dimensional group-IV monochalcogenide monolayers (SiS, SiSe, SiTe, GeS, GeSe, GeTe, SnS, SnSe, SnTe, PbS, PbSe, and PbTe) with a buckled honeycomb atomistic structure—belonging to symmetry group P3m1—displaying an out-of-plane intrinsic electric polarization are shown to be metastable by three independent methods. First, we uncover a coordination-preserving structural transformation from the low-buckled honeycomb structure onto the lower-energy Pnm2 1 (or Pmmn for PbS, PbSe, and PbTe) phase to estimate energy barriers E B that must be overcome during such structural transformation. Using the curvature of the local minima and E B as inputs to Kramers escape formula, large escape times are found, implying the structural metastability of the buckled honeycomb phase (with the exception of PbS and PbSe, these phases display escape times ranging from 700 years to multiple times the age of the universe and can be considered “stable” for practical purposes in that relative sense). The second demonstration is provided by phonon dispersion relations that include the effect of long-range Coulomb forces and display no negative vibrational modes. The third and final demonstration of structural metastability is furnished by room-temperature ab initio molecular dynamics for selected compounds. Here, the magnitude of the electronic band gap evolves with chemical composition. Different from other binary two-dimensional compounds such as transition metal dichalcogenide monolayers and hexagonal boron nitride monolayers which only develop an in-plane piezoelectric response, the twelve group-IV monochalcogenide monolayers with a buckled honeycomb structure also display out-of-plane piezoelectric properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure-induced tuning of the triangular-honeycomb structure of ferroelectric quantum spin liquid candidate, TbInO 3

The pressure response of the triangular-honeycomb-structured quantum spin liquid candidate, TbInO 3 , has been determined via neutron powder diffraction up to 5.75(5) GPa. The system retains hexagonal symmetry up to the maximum pressure considered. The structure was found to compress less anisotropically than related compounds, though it is more compressible within the 2D plane than between subsequent layers. Through extracting the O-atom coordinates we find experimental evidence that may suggest the enhancement of ferroelectricity at pressures as low as 3 GPa.

Ridley, Christopher J. [Oak Ridge National Laborat↗

Structural, electronic and magnetic properties of Au-based monolayer derivatives in honeycomb structure

We present electronic properties of atomic layer of Au, Au{sub 2}-N, Au{sub 2}-O and Au{sub 2}-F in graphene-like structure within the framework of density functional theory (DFT). The lattice constant of derived monolayers are found to be higher than the pristine Au monolayer. Au monolayer is metallic in nature with quantum ballistic conductance calculated as 4G{sub 0}. Similarly, Au{sub 2}-N and Au{sub 2}-F monolayers show 4G{sub 0} and 2G{sub 0} quantum conductance respectively while semiconducting nature with calculated band gap of 0.28 eV has been observed for Au{sub 2}-O monolayer. Most interestingly, half metalicity has been predicted for Au{sub 2}-N and Au{sub 2}-F monolayers. Our findings may have importance for the application of these monolayers in nanoelectronic and spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A Model for Simulating the Response of Aluminum Honeycomb Structure to Transverse Loading

A 1-dimensional material model was developed for simulating the transverse (thickness-direction) loading and unloading response of aluminum honeycomb structure. The model was implemented as a user-defined material subroutine (UMAT) in the commercial finite element analysis code, ABAQUS(Registered TradeMark)/Standard. The UMAT has been applied to analyses for simulating quasi-static indentation tests on aluminum honeycomb-based sandwich plates. Comparison of analysis results with data from these experiments shows overall good agreement. Specifically, analyses of quasi-static indentation tests yielded accurate global specimen responses. Predicted residual indentation was also in reasonable agreement with measured values. Overall, this simple model does not involve a significant computational burden, which makes it more tractable to simulate other damage mechanisms in the same analysis.

Ratcliffe, James G.↗

Method of fabricating lightweight honeycomb structures

A process is disclosed for fabricating lightweight honeycomb type structures out of material such as silicon carbide (SiC) and silicon (S). The lightweight structure consists of a core to define the shape and size of the structure. The core is coated with an appropriate deposit such as SiC or Si to give the lightweight structure strength and stiffness and for bonding the lightweight structure to another surface. The core is fabricated from extremely thin ribs of appropriately stiff and strong material such as graphite. First, a graphite core consisting of an outer hexagonal cell with six inner triangular cells is constructed from the graphite ribs. The graphite core may be placed on the back-up side of a SiC faceplate and then coated with SiC to produce a monolithic structure without the use of any bonding agent. Cores and methods for the fabrication thereof in which the six inner triangular cells are further divided into a plurality of cells are also disclosed.

Goela, Jitendra S.↗

Characterization of Thermal and Mechanical Impact on Aluminum Honeycomb Structures

This study supports NASA Kennedy Space Center's research in the area of intelligent thermal management systems and multifunctional thermal systems. This project addresses the evaluation of the mechanical and thermal properties of metallic cellular solid (MCS) materials; those that are lightweight; high strength, tunable, multifunctional and affordable. A portion of the work includes understanding the mechanical properties of honeycomb structured cellular solids upon impact testing under ambient, water-immersed, liquid nitrogen-cooled, and liquid nitrogen-immersed conditions. Additionally, this study will address characterization techniques of the aluminum honeycomb's ability to resist multiple high-rate loadings or impacts in varying environmental conditions, using various techniques for the quantitative and qualitative determination for commercial applicability.

Robinson, Christen M.↗