Search NASA⌕ Search

SEARCH · Search NASA

Results for “HONEYCOMB STRUCTURES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Template-free preparation and morphology evolution of (Cu, Ni) honeycomb structure via etching additive manufactured Fe-Cu-Ni alloy

Highlights: • (Cu, Ni) honeycomb structure with pore size of ~11 μm and wall thickness of ~200 nm was prepared. • The morphology evolution and the potential formation mechanism of the (Cu, Ni) honeycomb structure were investigated. • A new template-free method of additive manufacturing combined with etching was proposed to prepare ordered porous structure. • This work provides important insights into the preparation of ordered porous structure without template. - Abstract: Metallic ordered porous structures have attracted increasing attention due to their wide range of applications, but their preparation is usually accompanied with the employing of consumable templates. The development of template-free method to prepare metallic ordered porous structure can significantly reduce the cost as well as streamline the procedures. In the present work, a new template-free method of additive manufacturing combined with etching was proposed to prepare ordered porous structures. (Cu, Ni) honeycomb structure with pore size of ~11 μm and wall thickness of ~200 nm was successfully prepared from the Fe-Cu-Ni precursor alloy. The morphology evolution and the potential formation mechanism of the (Cu, Ni) honeycomb structure were studied. This work provides important insights into the preparation of ordered metallic porous structure without template.

36 MATERIALS SCIENCE↗

Metastable piezoelectric group-IV monochalcogenide monolayers with a buckled honeycomb structure

Multiple two-dimensional materials are being naïvely termed stable on the grounds of displaying phonon dispersions with no negative frequencies and of not collapsing on molecular dynamics calculations at fixed volume. But, if these phases do not possess the smallest possible structural energy, how does one understand and establish their actual meta stability? To answer this question, twelve two-dimensional group-IV monochalcogenide monolayers (SiS, SiSe, SiTe, GeS, GeSe, GeTe, SnS, SnSe, SnTe, PbS, PbSe, and PbTe) with a buckled honeycomb atomistic structure—belonging to symmetry group P3m1—displaying an out-of-plane intrinsic electric polarization are shown to be metastable by three independent methods. First, we uncover a coordination-preserving structural transformation from the low-buckled honeycomb structure onto the lower-energy Pnm2 1 (or Pmmn for PbS, PbSe, and PbTe) phase to estimate energy barriers E B that must be overcome during such structural transformation. Using the curvature of the local minima and E B as inputs to Kramers escape formula, large escape times are found, implying the structural metastability of the buckled honeycomb phase (with the exception of PbS and PbSe, these phases display escape times ranging from 700 years to multiple times the age of the universe and can be considered “stable” for practical purposes in that relative sense). The second demonstration is provided by phonon dispersion relations that include the effect of long-range Coulomb forces and display no negative vibrational modes. The third and final demonstration of structural metastability is furnished by room-temperature ab initio molecular dynamics for selected compounds. Here, the magnitude of the electronic band gap evolves with chemical composition. Different from other binary two-dimensional compounds such as transition metal dichalcogenide monolayers and hexagonal boron nitride monolayers which only develop an in-plane piezoelectric response, the twelve group-IV monochalcogenide monolayers with a buckled honeycomb structure also display out-of-plane piezoelectric properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Pressure-induced tuning of the triangular-honeycomb structure of ferroelectric quantum spin liquid candidate, TbInO 3

The pressure response of the triangular-honeycomb-structured quantum spin liquid candidate, TbInO 3 , has been determined via neutron powder diffraction up to 5.75(5) GPa. The system retains hexagonal symmetry up to the maximum pressure considered. The structure was found to compress less anisotropically than related compounds, though it is more compressible within the 2D plane than between subsequent layers. Through extracting the O-atom coordinates we find experimental evidence that may suggest the enhancement of ferroelectricity at pressures as low as 3 GPa.

Ridley, Christopher J. [Oak Ridge National Laborat↗

Structural, electronic and magnetic properties of Au-based monolayer derivatives in honeycomb structure

We present electronic properties of atomic layer of Au, Au{sub 2}-N, Au{sub 2}-O and Au{sub 2}-F in graphene-like structure within the framework of density functional theory (DFT). The lattice constant of derived monolayers are found to be higher than the pristine Au monolayer. Au monolayer is metallic in nature with quantum ballistic conductance calculated as 4G{sub 0}. Similarly, Au{sub 2}-N and Au{sub 2}-F monolayers show 4G{sub 0} and 2G{sub 0} quantum conductance respectively while semiconducting nature with calculated band gap of 0.28 eV has been observed for Au{sub 2}-O monolayer. Most interestingly, half metalicity has been predicted for Au{sub 2}-N and Au{sub 2}-F monolayers. Our findings may have importance for the application of these monolayers in nanoelectronic and spintronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development of a portable mechanical hysteresis measurement and imaging system for impact characterization in honeycomb sandwich structures

Honeycomb sandwich materials are commonly used for aero-structures, but because the outer skins are typically thin, 2-10 plys, the structures are susceptible to impact damage. NDI methods such as tap tests, bond testers and TTU ultrasound are successfully deployed to find impact damage, but identifying the type/degree of damage is troublesome. As the type/degree of impact damage guides decisions by the maintenance, repair and overhaul (MRO) community regarding repair, the ability to characterize impacts is of interest. Previous work demonstrated that additional impact characterization may be gleaned from hysteresis loop area, as determined from an out-of-plane load-vs-displacement plot, where this parameter shows a correlation with impact energy. This presentation reports on current work involving the development of a portable hysteresis measurement and imaging system based on an instrumented tapper. Data processing and analysis methods that allow production of the load/displacement data from a single accelerometer are discussed, with additional reporting of tests of software to automatically vary pixel size during scanning to decrease C-scans inspection time.

36 MATERIALS SCIENCE↗

Realization of AlSb in the Double-Layer Honeycomb Structure: A Robust Class of Two-Dimensional Material

Exploring new two-dimensional (2D) van der Waals (vdW) systems is at the forefront of materials physics. Here, through molecular beam epitaxy on graphene-covered SiC(0001), we report successful growth of AlSb in the double-layer honeycomb (DLHC) structure, a 2D vdW material which has no direct analogue to its 3D bulk and is predicted kinetically stable when freestanding. The structural morphology and electronic structure of the experimental 2D AlSb are characterized with spectroscopic imaging scanning tunneling microscopy and cross-sectional imaging scanning transmission electron microscopy, which compare well to the proposed DLHC structure. The 2D AlSb exhibits a bandgap of 0.93 eV versus the predicted 1.06 eV, which is substantially smaller than the 1.6 eV of bulk. We also attempt the less-stable InSb DLHC structure; however, it grows into bulk islands instead. Here, the successful growth of a DLHC material here opens the door for the realization of a large family of novel 2D DLHC traditional semiconductors with unique excitonic, topological, and electronic properties.

36 MATERIALS SCIENCE↗

Nano-honeycomb structured transparent electrode for enhanced light extraction from organic light-emitting diodes

A universal nano-sphere lithography method has been developed to fabricate nano-structured transparent electrode, such as indium tin oxide (ITO), for light extraction from organic light-emitting diodes (OLEDs). Perforated SiO{sub 2} film made from a monolayer colloidal crystal of polystyrene spheres and tetraethyl orthosilicate sol-gel is used as a template. Ordered nano-honeycomb pits on the ITO electrode surface are obtained by chemical etching. The proposed method can be utilized to form large-area nano-structured ITO electrode. More than two folds' enhancement in both current efficiency and power efficiency has been achieved in a red phosphorescent OLED which was fabricated on the nano-structured ITO substrate.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis of Honeycomb-Structured Beryllium Oxide via Graphene Liquid Cells

Using high-resolution transmission electron microscopy and electron energy-loss spectroscopy, we demonstrate that beryllium oxide crystallizes in the planar hexagonal structure in a graphene liquid cell by a wet-chemistry approach. These liquid cells can feature van-der-Waals pressures up to 1 GPa, producing a miniaturized high-pressure container for the crystallization in solution. The thickness of as-received crystals is beyond the thermodynamic ultra-thin limit above which the wurtzite phase is energetically more favorable according to the theoretical prediction. The crystallization of the planar phase is ascribed to the near-free-standing condition afforded by the graphene surface. Our calculations show that the energy barrier of the phase transition is responsible for the observed thickness beyond the previously predicted limit. These findings open a new door for exploring aqueous-solution approaches of more metal-oxide semiconductors with exotic phase structures and properties in graphene-encapsulated confined cells.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Core design study of a supercritical light water reactor with double row fuel rods

An equilibrium core for supercritical light water reactor has been designed. A novel type of fuel assembly with dual rows of fuel rods between water rods is chosen and optimized to get more uniform assembly power distributions. Stainless steel is used for fuel rod cladding and structural material. Honeycomb structure filled with thermal isolation is introduced to reduce the usage of stainless steel and to keep moderator temperature below the pseudo critical temperature. Water flow scheme with ascending coolant flow in inner regions is carried out to achieve high outlet temperature. In order to enhance coolant outlet temperature, the radial power distributions needs to be as flat as possible through operation cycle. Fuel loading pattern and control rod pattern are optimized to flatten power distribution at inner regions. Axial fuel enrichment is divided into three parts to control axial power peak, which affects maximum cladding surface temperature. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

A Li-rich layered oxide cathode with negligible voltage decay

With high capacity at low cost, Li- and Mn-rich (LMR) layered oxides are a promising class of cathodes for next generation Li-ion batteries. However, substantial voltage decay during cycling, due to the unstable Li 2 MnO 3 honeycomb structure, is still an obstacle for their practical deployment. Here we report a Co-free LMR Li-ion battery cathode without voltage decay. The material has a composite structure consisting of layered LiTMO 2 and various stacked Li 2 MnO 3 components, where transition metal (TM) ions partially reside in the Li layers of Li 2 MnO 3 , serving as a “cap” to strengthen the stability of the honeycomb structure. This unique capped-honeycomb structure is persistent after high-voltage cycling and prevents TM migration and oxygen loss, as shown by experimental and computational results. Furthermore, this work demonstrates that the long-standing voltage decay problem in LMRs can be effectively eliminated by internally pinning the honeycomb structure, which opens an avenue to developing nextgeneration high-energy cathode materials.

25 ENERGY STORAGE↗

Toward the Stable and Reversible Lattice Oxygen Redox in Li-Rich Layered Oxides

Conventional wisdom on utilizing cation redox in intercalation materials for energy storage has been challenged by a new class of cathode materials where oxygen anions actively participate in the reversible electrochemical reaction. This type of Li-rich layered oxides (LRLO) have captured great interests in the field of energy storage materials as they are considered as one of the most promising cathode materials for future high energy density lithium-ion and lithium metal batteries. However, the activation of solid-state oxygen redox reaction usually causes some detrimental effects on the electrochemical performance (e.g., O 2 loss, voltage fade) preventing the practical application of LRLO (Y. S. Meng et al., Nature Energy, 2018, 3, 641-647; X. Yu et al., Nature Energy, 2018, 3, 690-698). Till now, the charge-compensation mechanism associated with oxygen reduction/oxidation is still under fierce debate. For instance, J.M. Tarascon et al. proposed the presence of peroxo-like species (O 2 n- , O-O: 2.45 Å) in lattice oxygen redox based on the research results of 4d/5d-TM LRLO (Science, 2015, 350, 1516-1521; Nature Materials, 2017, 16, 580-586). In contrast, P. Bruce et al. clearly demonstrated that there is no peroxide species formed in 3d-TM LRLO (Nature Chemistry, 2016, 8, 684-691). The controversial viewpoints regarding oxygen reduction/oxidation at solid state may be originated from the intrinsic complexity of this class of materials and the limitations of the characterization techniques. Our work reveals the origin of stable and reversible lattice oxygen redox in 3d TM LRLO, specifically, the localized structure distortion (i.e., short O-O pairs) accompanying the oxygen redox is favorable for the stability of the average layered lattice structure, maintaining the high-voltage character and topotactic structure-reversibility of LRLO. With a model compound (Li 1.2 Mn 0.54 Co 0.13 Ni 0.13 O 2 ), we for the first time observe a local occurrence of short O-O pair (~2.39 Å) concomitant with the lattice oxygen redox via neutron pair distribution function. It was found that the distance of this short O-O pair is very similar to that of O-O dimer in peroxo-like species, but our quantum mechanical calculation results suggest that the bonding nature of this short O-O pair (in which potential π-type overlap dominated) is quite different from that of peroxo-like O-O dimer (in which σ-type bond formed). Based on these understandings in our work, an optimization guidance for LRLO is unambiguously presented: designing a robust layered structure with high-covalency TMs while constructing a flexible local structure (e.g., honeycomb structure) with high-ionicity TMs to accommodate the local distortion induced by oxygen redox, thus achieving the reversible high energy density in LRLO.

Zhang, Minghao↗

High-level incorporation of antimony in germanium by laser annealing

In this work we investigate pulse laser annealing as an alternative approach to reach high-level incorporation of Sb in substitutional location in crystalline germanium. Laser irradiation is demonstrated to recover also those structural defects, like honeycomb structures, that form during high-fluence heavy-ion implantations in Ge and that cannot be eliminated by conventional thermal treatments. Indeed, concentrations of substitutional Sb higher than 1x10{sup 21} at./cm{sup 3} have been obtained, well above the solid solubility of Sb in Ge. The strain induced on the Ge host lattice is also investigated, evidencing that the obtained Sb doped Ge layer is pseudomorphic to the Ge substrate while positively strained by the substitutional Sb atoms present within the Ge matrix. The kinetics of this Sb-rich Ge alloy phase is finally investigated, showing that most of Sb goes out of lattice with increasing the annealing temperature up to 488 deg. C, leading to a decrease in the related lattice deformation. These results are very relevant for the future high-mobility channel technology.

36 MATERIALS SCIENCE↗

Electrochemical properties and lithium ion diffusion in Li{sub 4}FeSbO{sub 6} studied by first principle

Due to the high capacity, Li-rich materials Li{sub 2}MO{sub 3} (M = transition metal) have attracted considerable attention as the next generation of Li-ion batteries. Li{sub 4}FeSbO{sub 6} is a new Li-rich layered oxide material with antiferromagnet honeycomb structure. In this work, the electrochemical behavior, charging process and oxygen stability of Li{sub x}FeSbO{sub 6} (0 ≤ x<4) material are investigated by using the spin-polarized density functional theory. Moreover, climbing image nudged elastic band (CI-NEB) method is used to calculate the Li ion migration properties. The results show that Li{sub 4}FeSbO{sub 6} exhibits poor inherent conductivity with the band gap of 2.45 eV. During charging process, the structure presents the excellent volume stability. When Li is extracted, the charge compensation is mainly contributed by the oxygen atoms through analyzing the Bader charges of each element. In addition, oxygen evolution reactions will occur in Li{sub x}FeSbO{sub 6} (x ≤ 1.5), which will decay the capacities during cycling process. Finally, we calculated that the lithium ion can diffuse in a three-dimensional pathway with the activation barriers from 0.36 eV to 0.67 eV. - Graphical abstract: Li{sub 4}FeSbO{sub 6} is a new Li-rich layered oxide material with antiferromagnet honeycomb structure. We calculated that the lithium ion can diffuse in a three-dimensional pathway Display Omitted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Additively Manufactured Shock Absorbing Engineered Materials

This study investigates the static and dynamic mechanical performance of conformal negative stiffness honeycomb structures. Negative stiffness honeycombs are capable of elastically absorbing a static or dynamic mechanical load at a predefined force threshold and returning to their initial configuration after the load is released. Most negative stiffness honeycombs rely on mechanical loading that is orthogonal to the base of the structure. In this study, a more three-dimensional design is presented that allows the honeycomb to conform to complex surfaces and protect against impacts from multiple directions. The conformal designs are additively manufactured in nylon and stainless steel and subjected to quasi-static mechanical loading and dynamic mechanical impact tests that demonstrate their impact protection capabilities.

36 MATERIALS SCIENCE↗