Search NASA⌕ Search

SEARCH · Search NASA

Results for “HYDROBROMIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Structural and transport properties of Nafion in hydrobromic-acid solutions

Proton-exchange membranes are key solid-state ion carriers in many relevant energy technologies including flow batteries, fuel cells, and solar-fuel generators. In many of these systems, the membranes are in contact with electrolyte solutions. In this paper, we focus on the impact of different HBr, a flow-battery and exemplary acid electrolyte, external concentrations on the conductivity of Nafion, a perfluorosulfonic acid membrane that is commonly used in many energy-related applications. The peak and then decrease in conductivity is correlated with measured changes in the water and HBr content within the membrane. In addition, small-angle x-ray scattering is used to probe the nanostructure to correlate how the interactions of the bromide ion with the fixed sulfonic-acid sites impact conductivity and hydrophilic domain distance. It is also shown that membrane pretreatment has a large impact on the underlying structure/function relationship. The obtained data and results are useful for delineation of optimal operating regimes for flow batteries and similar technologies as well as in understanding underlying structure/function relationships of ionomers in electrolyte solutions. (C) 2013 Elsevier B.V. All rights reserved.

Kusoglu, A↗

The composition of the ultraviolet dark markings on Venus

The ultraviolet dark clouds are an ephemeral phenomenon in the Venus atmosphere, apparently just near the limit of stability. The UV dark material is moderately abundant, perhaps 10%, since the contrasts between light and dark material are some 20%. The material should absorb light between 3000-4000 A, and ideally should also have visible absorptions in the blue, as the overall spectral albedo of Venus indicates. Such a material is bromine dissolved in hydrobromic acid. Solar radiation near 2500 A is sufficient to partially photolyze HBr into Br2. HBr in the Venus atmosphere is inferred to have a mixing ratio of 0.0001 versus CO2. With a water vapor mixing ratio of 0.001, droplets of hydrobromic acid are possible. These droplets would eventually evaporate in the drier upper atmosphere. The refractive index of these hydrobromic acid droplets of 52% (by weight) composition is 1.46, within the limits set by polarization studies of Venus.

Sill, G. T.↗

Enhancing and Extinguishing the Different Emission Features of 2D (EA(1-)(x)FA(x))(4)Pb3Br10 Perovskite Films

2D hybrid perovskites are attractive for optoelectronic devices. In thin films, the color of optical emission and the texture of crystalline domains are often difficult to control. Here, a method for extinguishing or enhancing different emission features is demonstrated for the family of 2D Ruddlesden-Popper perovskites (EA(1-)(x)FA(x))(4)Pb3Br10 (EA = ethylammonium, FA = formamidinium). When grown from aqueous hydrobromic acid, crystals of (EA(1-)(x)FA(x))(4)Pb3Br10 retain all the emission features of their parent compound, (EA)(4)Pb3Br10. Surprisingly, when grown from dimethylformamide (DMF), an emission feature, likely self-trapped exciton (STE), near 2.7 eV is missing. Extinction of this feature is correlated with DMF being incorporated between the 2D Pb-Br sheets, forming (EA(1-)(x)FA(x))(4)Pb3Br10 center dot(DMF)(y). Without FA, films grown from DMF form (EA)(4)Pb3Br10, retain little solvent, and have strong emission near 2.7 eV. Slowing the kinetics of film growth strengthens a different emission feature, likely a different type of STE, which is much broader and present in all compositions. Films of (EA(1-)(x)FA(x))(4)Pb3Br10 center dot(DMF)(y) have large, micron-sized domains and homogeneous orientation of the semiconducting sheets, resulting in low electronic disorder near the absorption edge. The ability to selectively strengthen or extinguish different emission features in films of (EA(1-)(x)FA(x))(4)Pb3Br10 center dot(DMF)(y) reveals a pathway to tune the emission color in these compounds.

2D halide perovskites↗

Study of the liquid vapor equilibrium in the bromine-hydrobromic acid-water system

A glass ebullioscope was built and at atmospheric pressure, liquid-vapor equilibria relative to the Br2-HBr-H2O system, in the concentration range of interest for evaluation of the Mark 13 cycle was studied. Measurements were performed for the brome-azeotrope (HBr-H2O) pseudo-binary system and for the ternary system at temperatures lower than 125 C and in the bromine concentration range up to 13% wt.

Benizri, R.↗

Realizing InGaN monolithic solar-photoelectrochemical cells for artificial photosynthesis

InGaN alloys are very promising for solar water splitting because they have direct bandgaps that cover almost the whole solar spectrum. The demonstration of direct solar-to-fuel conversion without external bias with the sunlight being the only energy input would pave the way for realizing photoelectrochemical (PEC) production of hydrogen by using InGaN. A monolithic solar-PEC cell based on InGaN/GaN multiple quantum wells capable to directly generate hydrogen gas under zero bias via solar water splitting is reported. Under the irradiation by a simulated sunlight (1-sun with 100 mW/cm{sup 2}), a 1.5% solar-to-fuel conversion efficiency has been achieved under zero bias, setting a fresh benchmark of employing III-nitrides for artificial photosynthesis. Time dependent hydrogen gas production photocurrent measured over a prolonged period (measured for 7 days) revealed an excellent chemical stability of InGaN in aqueous solution of hydrobromic acid. The results provide insights into the architecture design of using InGaN for artificial photosynthesis to provide usable clean fuel (hydrogen gas) with the sunlight being the only energy input.

36 MATERIALS SCIENCE↗

Distribution of copper, silver and gold during thermal treatment with brominated flame retardants

Highlights: • Copper, silver and gold during thermal treatment with brominated flame retardants. • Distribution of copper, silver and gold during thermal processing. • Thermodynamic considerations of the bromination reactions. - Abstract: The growing consumption of electric and electronic equipment results in creating an increasing amount of electronic waste. The most economically and environmentally advantageous methods for the treatment and recycling of waste electric and electronic equipment (WEEE) are the thermal techniques such as direct combustion, co-combustion with plastic wastes, pyrolysis and gasification. Nowadays, this kind of waste is mainly thermally treated in incinerators (e.g. rotary kilns) to decompose the plastics present, and to concentrate metals in bottom ash. The concentrated metals (e.g. copper, precious metals) can be supplied as a secondary raw material to metal smelters, while the pyrolysis of plastics allows the recovery of fuel gases, volatilising agents and, eventually, energy. Indeed, WEEE, such as a printed circuit boards (PCBs) usually contains brominated flame retardants (BFRs). From these materials, hydrobromic acid (HBr) is formed as a product of their thermal decomposition. In the present work, the bromination was studied of copper, silver and gold by HBr, originating from BFRs, such as Tetrabromobisphenol A (TBBPA) and Tetrabromobisphenol A-Tetrabromobisophenol A diglycidyl ether (TTDE) polymer; possible volatilization of the bromides formed was monitored using a thermo-gravimetric analyzer (TGA) and a laboratory-scale furnace for treating samples of metals and BFRs under an inert atmosphere and at a wide range of temperatures. The results obtained indicate that up to about 50% of copper and silver can evolve from sample residues in the form of volatile CuBr and AgBr above 600 and 1000 °C, respectively. The reactions occur in the molten resin phase simultaneously with the decomposition of the brominated resin. Gold is resistant to HBr and remains unchanged in the residue.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Sulfuric Acid in the Venus Clouds

The visible and ultraviolet transmission features of a thin layer of elemental bromine and hydrobromic acid dissolved in sulfuric acid somewhat resemble the Venus spectrum, up to 14 microns. The chemical process postulated for forming sulfuric acid involves the oxidation of sulfur and its compounds to sulfuric acid through the agency of elemental bromine, produced by the photolytic decomposition of hydrogen bromide.

Sill, G. T.↗

Sulfuric acid in the Venus clouds.

The extremely dry nature of the Venus upper atmosphere appears to demand the presence of an efficient desiccating agent as the chief constituent of the clouds of Venus. On the basis of polarization measures it is to be expected that this substance is present as spherical droplets, 1 to 2 microns in diameter, with a refractive index n of 1.46 plus or minus 0.02 at 3500A in the observed region of the atmosphere, with T about equal to 235 K. This substance must have ultraviolet, visible, and infrared reflection properties not inconsistent with the observed spectrum of Venus. Sulfuric acid, of about 86% by weight composition, roughly fulfills the first of these properties. The visible and ultraviolet transmission features of a thin layer of elemental bromine and hydrobromic acid dissolved in sulfuric acid somewhat resemble the Venus spectrum, up to 14 microns. The chemical process postulated for forming sulfuric acid involves the oxidation of sulfur and its compounds to sulfuric acid through the agency of elemental bromine produced by the photolytic decomposition of hydrogen bromide.

Sill, G. T.↗

Probing the Effects of Acid Electrolyte Anions on Electrocatalyst Activity and Selectivity for the Oxygen Reduction Reaction

The local microenvironment at the electrode-electrolyte interface plays an important role in electrocatalytic performance. Herein, we investigate the effect of acid electrolyte anion identity on the oxygen reduction reaction (ORR) activity and selectivity of smooth Ag and Pd catalyst thin films. Cyclic voltammetry in perchloric, nitric, sulfuric, phosphoric, hydrochloric, and hydrobromic acid, at pH1, reveals that Ag ORR activity trends as follows: HClO 4 >HNO 3 >H 2 SO 4 >H 3 PO 4 >HCl>>HBr, while Pd ORR activity trends as: HClO 4 >H 2 SO 4 >HNO 3 >H 3 PO 4 >HCl>>HBr. Moreover, rotating-ring-disk-electrode selectivity measurements demonstrate enhanced 4 e - selectivity on both Ag and Pd, by up to 35% H 2 O 2 and 10% H 2 O 2 respectively, in HNO 3 compared to in HClO 4 . Relating physics-based modeling and experimental results, we postulate that ORR performance depends greatly on anion-related phenomena in the double layer, for instance competitive adsorption and non-covalent interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High electrical conductivity and carrier mobility in oCVD PEDOT thin films by engineered crystallization and acid treatment

Air-stable, lightweight, and electrically conductive polymers are highly desired as the electrodes for next-generation electronic devices. However, the low electrical conductivity and low carrier mobility of polymers are the key bottlenecks that limit their adoption. We demonstrate that the key to addressing these limitations is to molecularly engineer the crystallization and morphology of polymers. We use oxidative chemical vapor deposition (oCVD) and hydrobromic acid treatment as an effective tool to achieve such engineering for conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT). We demonstrate PEDOT thin films with a record-high electrical conductivity of 6259 S/cm and a remarkably high carrier mobility of 18.45 cm 2 V -1 s -1 by inducing a crystallite-configuration transition using oCVD. Subsequent theoretical modeling reveals a metallic nature and an effective reduction of the carrier transport energy barrier between crystallized domains in these thin films. To validate this metallic nature, we successfully fabricate PEDOT-Si Schottky diode arrays operating at 13.56 MHz for radio frequency identification (RFID) readers, demonstrating wafer-scale fabrication compatible with conventional complementary metal-oxide semiconductor (CMOS) technology. The oCVD PEDOT thin films with ultrahigh electrical conductivity and high carrier mobility show great promise for novel high-speed organic electronics with low energy consumption and better charge carrier transport.

36 MATERIALS SCIENCE↗

Optimization of Photocatalyst Excited- and Ground-State Reduction Potentials for Dye-Sensitized HBr Splitting

Dye-sensitized bromide oxidation was investigated using a series of four ruthenium polypyridyl photocatalysts anchored to SnO 2 /TiO 2 core/shell mesoporous thin films through 2,2'-bipyridine-4,4'-diphosphonic acid anchoring groups. The ground- and excited-state reduction potentials were tuned over 500 mV by the introduction of electron withdrawing groups in the 4 and 4' positions of the ancillary bipyridine ligands. Upon light excitation of the surface-bound photocatalysts, excited-state electron injection yielded an oxidized photocatalyst that was regenerated through bromide oxidation. High injection quantum yields (Φ inj ) and regeneration quantum yields (Φ reg ) were essential to obtain efficient bromide oxidation yet required a photocatalyst that is both a potent photoreductant and a strong oxidant after excited-state injection. The four photocatalysts utilized in this manuscript ranged from unity Φ inj (1.0) and minimal Φ reg (0.037) to minimal Φ inj (0.09) and unity Φ reg (1.0). The photocatalyst that displayed the highest overall dye-sensitized photoelectrosynthesis cell performances exhibited near unity Φ reg (0.99), while a significant Φ inj was still preserved (0.59). Finally, these results highlighted the delicate interplay between the ground- and excited-state reduction potentials of photocatalysts for dye-sensitized hydrobromic acid splitting.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Stratospheric Heterogeneous Chemistry and Microphysics: Model Development, Validation and Applications

The objectives of this project are to: define the chemical and physical processes leading to stratospheric ozone change that involve polar stratospheric clouds (PSCS) and the reactions occurring on the surfaces of PSC particles; study the formation processes, and the physical and chemical properties of PSCS, that are relevant to atmospheric chemistry and to the interpretation of field measurements taken during polar stratosphere missions; develop quantitative models describing PSC microphysics and heterogeneous chemical processes; assimilate laboratory and field data into these models; and calculate the extent of chemical processing on PSCs and the impact of specific microphysical processes on polar composition and ozone depletion. During the course of the project, a new coupled microphysics/physical-chemistry/ photochemistry model for stratospheric sulfate aerosols and nitric acid and ice PSCs was developed and applied to analyze data collected during NASA's Arctic Airborne Stratospheric Expedition-II (AASE-II) and other missions. In this model, detailed treatments of multicomponent sulfate aerosol physical chemistry, sulfate aerosol microphysics, polar stratospheric cloud microphysics, PSC ice surface chemistry, as well as homogeneous gas-phase chemistry were included for the first time. In recent studies focusing on AASE measurements, the PSC model was used to analyze specific measurements from an aircraft deployment of an aerosol impactor, FSSP, and NO(y) detector. The calculated results are in excellent agreement with observations for particle volumes as well as NO(y) concentrations, thus confirming the importance of supercooled sulfate/nitrate droplets in PSC formation. The same model has been applied to perform a statistical study of PSC properties in the Northern Hemisphere using several hundred high-latitude air parcel trajectories obtained from Goddard. The rates of ozone depletion along trajectories with different meteorological histories are presently being systematically evaluated to identify the principal relationships between ozone loss and aerosol state. Under this project, we formulated a detailed quantitative model that predicts the multicomponent composition of sulfate aerosols under stratospheric conditions, including sulfuric, nitric, hydrochloric, hydrofluoric and hydrobromic acids. This work defined for the first time the behavior of liquid ternary-system type-1b PSCS. The model also allows the compositions and reactivities of sulfate aerosols to be calculated over the entire range of environmental conditions encountered in the stratosphere (and has been incorporated into a trajectory/microphysics model-see above). Important conclusions that derived from this work over the last few years include the following: the HNO3 content of liquid-state aerosols dominate PSCs below about 195 K; the freezing of nitric acid ice from sulfate aerosol solutions is likely to occur within a few degrees K of the water vapor frost point; the uptake and reactions of HCl in liquid aerosols is a critical component of PSC heterogeneous chemistry. In a related application of this work, the inefficiency of chlorine injection into the stratosphere during major volcanic eruptions was explained on the basis of nucleation of sulfuric acid aerosols in rising volcanic plumes leading to the formation of supercooled water droplets on these aerosols, which efficiently scavenges HCl via precipitation.

Turco, Richard P.↗

Rapid separation and purification of uranium and plutonium from dilute-matrix samples

This work presents a streamlined separation and purification approach for trace uranium and plutonium from dilute (carrier-free) matrices. The method, effective for nanogram quantities of U and femtogram to picogram quantities of Pu, is ideally suited for environmental swipe samples that contain a small amount of collected bulk material. As such, it may be applicable for processing swipe samples such as those collected in IAEA inspection activities as well as swipes that are loaded with unknown analytes, such as those implemented in interlaboratory round-robin or proficiency tests. Additionally, the simplified actinide separation could find use in internal laboratory monitoring of clean room conditions prior to or following more extensive chemical processing. We describe key modifications to conventional techniques that result in a relatively rapid, cost-effective, and efficient U and Pu separation process. We demonstrate the efficacy of implementing anion exchange chromatography in a single column approach. We also show that hydrobromic acid is an effective substitute in lieu of hydroiodoic acid for eluting Pu. Lastly, we show that nitric acid is an effective digestion agent in lieu of perchloric acid and/or hydrofluoric acid. A step by step procedure of this process is detailed.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Materials Data on KH13CBrNO7 by Materials Project

KCNH11O6H2OBr crystallizes in the monoclinic P2_1/c space group. The structure is one-dimensional and consists of four hydrobromic acid molecules; four water molecules; and two KCNH11O6 ribbons oriented in the (1, 0, 0) direction. In each KCNH11O6 ribbon, K1+ is bonded in a 8-coordinate geometry to eight O2- atoms. There are a spread of K–O bond distances ranging from 2.60–2.94 Å. C4+ is bonded in a tetrahedral geometry to one N3- and three H1+ atoms. The C–N bond length is 1.48 Å. There is one shorter (1.09 Å) and two longer (1.10 Å) C–H bond length. N3- is bonded in a trigonal planar geometry to one C4+ and two O2- atoms. Both N–O bond lengths are 1.24 Å. There are eleven inequivalent H1+ sites. In the first H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the second H1+ site, H1+ is bonded in a single-bond geometry to one C4+ atom. In the third H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the fourth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the fifth H1+ site, H1+ is bonded in a single-bond geometry to one C4+ atom. In the sixth H1+ site, H1+ is bonded in a single-bond geometry to one C4+ atom. In the seventh H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.98 Å. In the eighth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.97 Å. In the ninth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the tenth H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. In the eleventh H1+ site, H1+ is bonded in a single-bond geometry to one O2- atom. The H–O bond length is 0.99 Å. There are six inequivalent O2- sites. In the first O2- site, O2- is bonded in a water-like geometry to one K1+ and two H1+ atoms. In the second O2- site, O2- is bonded in a distorted water-like geometry to one K1+ and two H1+ atoms. In the third O2- site, O2- is bonded in a water-like geometry to one K1+ and two H1+ atoms. In the fourth O2- site, O2- is bonded in a 1-coordinate geometry to two equivalent K1+ and one N3- atom. In the fifth O2- site, O2- is bonded in a water-like geometry to one K1+ and two H1+ atoms. In the sixth O2- site, O2- is bonded in a 1-coordinate geometry to two equivalent K1+ and one N3- atom.

36 MATERIALS SCIENCE↗

Materials Data on KAs4BrO6 by Materials Project

K(As2O3)2Br crystallizes in the hexagonal P6/mmm space group. The structure is two-dimensional and consists of one hydrobromic acid molecule and one K(As2O3)2 sheet oriented in the (0, 0, 1) direction. In the K(As2O3)2 sheet, K1+ is bonded to twelve equivalent O2- atoms to form edge-sharing KO12 cuboctahedra. All K–O bond lengths are 3.17 Å. As3+ is bonded in a distorted T-shaped geometry to three equivalent O2- atoms. All As–O bond lengths are 1.84 Å. O2- is bonded in a distorted bent 120 degrees geometry to two equivalent K1+ and two equivalent As3+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on H4BrN by Materials Project

NH4Br is Iron carbide-derived structured and crystallizes in the tetragonal P4/nmm space group. The structure is zero-dimensional and consists of two ammonium molecules and two hydrobromic acid molecules.

36 MATERIALS SCIENCE↗

Materials Data on HBr by Materials Project

HBr is Halite, Rock Salt structured and crystallizes in the cubic Fm-3m space group. The structure is zero-dimensional and consists of four hydrobromic acid molecules and four hydrogen molecules.

36 MATERIALS SCIENCE↗