Search NASA⌕ Search

SEARCH · Search NASA

Results for “HYDROGEN CHLORIDE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Regenerable hydrogen chloride removal sorbent and regenerable multi-functional hydrogen sulfide and hydrogen chloride removal sorbent for high temperature gas streams

A novel regenerable composition for removing hydrogen chloride and hydrogen sulfide from a gas stream, the sorbent comprising a mixture containing from about 5 wt % manganese oxide to about 99 wt. % manganese oxides where manganese can exist in various oxidation states.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

HYDROGEN CHLORIDE IN DIFFUSE INTERSTELLAR CLOUDS ALONG THE LINE OF SIGHT TO W31C (G10.6-0.4)

We report the detection of hydrogen chloride, HCl, in diffuse molecular clouds on the line of sight toward the star-forming region W31C (G10.6-0.4). The J = 1-0 lines of the two stable HCl isotopologues, H{sup 35}Cl and H{sup 37}Cl, are observed using the 1b receiver of the Heterodyne Instrument for the Far-Infrared (HIFI) on board the Herschel Space Observatory. The HCl line is detected in absorption, over a wide range of velocities associated with diffuse clouds along the line of sight to W31C. The analysis of the absorption strength yields a total HCl column density of a few 10{sup 13} cm{sup -2}, implying that HCl accounts for {approx}0.6% of the total gas-phase chlorine, which exceeds the theoretical model predictions by a factor of {approx}6. This result is comparable to those obtained from the chemically related species H{sub 2}Cl{sup +} and HCl{sup +}, for which large column densities have also been reported on the same line of sight. The source of discrepancy between models and observations is still unknown; however, the detection of these Cl-bearing molecules provides key constraints for the chlorine chemistry in the diffuse gas.

79 ASTRONOMY AND ASTROPHYSICS↗

Fischer-Tropsch Synthesis: XANES Investigation of Hydrogen Chloride Poisoned Iron and Cobalt-Based Catalysts at the K-Edges of Cl, Fe, and Co

The effect of co-fed hydrogen chloride (HCl) in syngas on the performance of iron and cobalt-based Fischer-Tropsch (FT) catalysts was investigated in our earlier studies [ACS Catal. 5 (2015) 3124-3136 and DOE final report 2011; Catal. Lett. 144 (2014) 1127-1133]. For an iron catalyst, lower HCl concentrations (< 2.0 ppmw of HCl)) in syngas did not significantly affect the activity, whereas rapid deactivation occurred at higher concentrations (~20 ppmw). With cobalt catalysts, even low concentrations of HCl (100 ppbw) caused catalyst deactivation, and the deactivation rate increased with increasing HCl concentration in the syngas. The deactivation of the catalysts is explained by the chloride being adsorbed on the catalyst surface to (1) block the active sites and/or (2) electronically modify the sites. In this study, XANES spectroscopy was employed to investigate HCl poisoning mechanism on the iron and cobalt catalysts. Cl K-edge normalized XANES results indicate that Cl is indeed present on the catalyst following HCl poisoning and exhibits a structure similar to the family of compounds MCl; two main peaks are formed, with the second peak consisting of a main peak and a higher energy shoulder. At the Co K and Fe K edges, the white line was observed to be slightly increased relative to the same catalyst under clean conditions. There is then the additional possibility that Cl adsorption may act in part to intercept electron density from the FT metallic function (e.g.,cobalt or iron carbide). If so, this would result in less back-donation and therefore hinder the scission of molecules such as CO.

10 SYNTHETIC FUELS↗

Ab initio study of charge-transfer dynamics in collisions of C{sup 2+} ions with hydrogen chloride

Ab initio quantum chemistry molecular calculations followed by a semiclassical dynamical treatment in the keV collision energy range have been developed for the study of the charge-transfer process in collisions of C{sup 2+} ions with hydrogen chloride. The mechanism has been investigated in detail in connection with avoided crossings between states involved in the reaction. A simple mechanism driven by a strong nonadiabatic coupling matrix element has been pointed out for this process. A comparative analysis with the halogen fluoride target corresponding to a similar electronic configuration shows a quite different charge-transfer mechanism leading to a very different behavior of the cross sections. Such behavior may be correlated to specific nonadiabatic interactions observed in these collision systems.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dichlorosilylene–hydrogen chloride complex: direct IR spectroscopic detection in argon matrix

A 1: 1 donor–acceptor complex between SiCl{sub 2} and HCl was detected by matrix IR spectroscopy. The existence of the complex was previously predicted theoretically in the course of analysis of mechanisms of chemical vapor deposition (CVD) processes involving chlorosilanes. The quantum chemical calculations at the G4(MP{sub 2}) level confirmed the possibility of formation of only one stable complex upon the reaction of SiCl{sub 2} with HCl. In addition to the complex of the simplest composition, complexes of SiCl{sub 2} with HCl associates were observed upon matrix annealing. The only product formed upon the photolysis of the complexes of all types was trichlorosilane, a product of silylene insertion into the H–Cl bond.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A COMPREHENSIVE SURVEY OF HYDROGEN CHLORIDE IN THE GALAXY

We report new observations of the fundamental J = 1-0 transition of HCl (at 625.918 GHz) toward a sample of 27 galactic star-forming regions, molecular clouds, and evolved stars, carried out using the Caltech Submillimeter Observatory. Fourteen sources in the sample are also observed in the corresponding H{sup 37}Cl J = 1-0 transition (at 624.978 GHz). We have obtained clear detections in all but four of the targets, often in emission. Absorptions against bright background continuum sources are also seen in nine cases, usually involving a delicate balance between emission and absorption features. From RADEX modeling, we derive gas densities and HCl column densities for sources with HCl emission. HCl is found in a wide range of environments, with gas densities ranging from 10{sup 5} to 10{sup 7} cm{sup -3}. The HCl abundance relative to H{sub 2} is in the range of (3-30) x 10{sup -10}. Comparing with the chlorine abundance in the solar neighborhood, this corresponds to a chlorine depletion factor of up to {approx}400, assuming that HCl accounts for one-third of the total chlorine in the gas phase. The [{sup 35}Cl]/[{sup 37}Cl] isotopic ratio is rather varied, from unity to {approx}5, mostly lower than the terrestrial value of 3.1. Such variation is highly localized, and could be generated by the nucleosynthesis in supernovae, which predicts a {sup 37}Cl deficiency in most models. The lower ratios seen in W3IRS4 and W3IRS5 likely confine the progenitors of the supernovae to stars with relatively large mass ({approx}>25 M{sub sun}) and high metallicity (Z {approx} 0.02).

79 ASTRONOMY AND ASTROPHYSICS↗

Reversible Poisoning of the Nickel/Zirconia Solid Oxide Fuel Cell Anodes by Hydrogen Chloride in Coal Gas

The performance of anode-supported solid oxide fuel cells (SOFC) was evaluated in synthetic coal gas containing HCl in the temperature range 650 to 850oC. Exposure to up to 800 ppm HCl resulted in reversible poisoning of the Ni/zirconia anode by chlorine species adsorption, the magnitude of which decreased with increased temperature. Performance losses increased with the concentration of HCl to ~100 ppm, above which losses were insensitive to HCl concentration. Cell voltage had no effect on poisoning. No evidence was found for long-term degradation that can be attributed to HCl exposure. Similarly, no evidence of microstructural changes or formation of new solid phases as a result of HCl exposure was found. From thermodynamic calculations, solid nickel chloride phase formation was shown to be highly unlikely in coal gas. Further, the presence of HCl at even the highest anticipated concentrations in coal gas would minimally increase the volatility of nickel.

01 COAL, LIGNITE, AND PEAT↗

Alkyl Chlorides as Hydrogen Bond Acceptors

To gain an understanding of the role of an alkyl chloride as a hydrogen bond acceptor, geometries and interaction energies were calculated at the MP2/aug-cc-pVDZ level of theory for complexes between ethyl chloride and representative hydrogen donor groups. The results establish that these donors, which include hydrogen cyanide, methanol, nitrobenzene, pyrrole, acetamide, and N-methylurea, form X-H {hor_ellipsis} Cl hydrogen bonds (X = C, N, O) of weak to moderate strength, with {Delta}E values ranging from -2.8 to -5.3 kcal/mol.

08 HYDROGEN↗

Syngas to Synfuels Process Development Unit Final Scientific/Technical Report

The process described is for the gasification of 20 kg/h of biomass (switchgrass) to produce a syngas suitable for upgrading to Fischer-Tropsch (FT) liquid fuels (gas, diesel, waxes, etc.). The gas stream generated from gasification is primarily composed of carbon monoxide (CO), hydrogen (H 2 ), carbon dioxide (CO 2 ), steam (H 2 O), and methane (CH 4 ), but also includes tars, particulate matter, ammonia (NH 3 ), hydrogen cyanide (HCN), hydrogen chloride (HCl), hydrogen sulfide ( H 2 S), carbonyl sulfide (COS), etc. as contaminants. The gas stream passes through an array of cleaning devices to remove the contaminants to levels suitable for FT synthesis of fuels/chemicals. These devices consist primarily of an oil scrubber (to remove tars and remaining particulates), sulfur scrubber (to remove sulfur compounds), and a wet scrubber (to remove NH 3 , HCl and remaining water soluble contaminants). The ammonia and oil scrubbers are absorption columns with a combination of random and structured packing materials, using water and oil as the adsorption liquids respectively. The ammonia scrubber performed very well, while operating the oil scrubber proved to be more difficult due to the nature of tar compounds. The sulfur scrubber is a packed bed absorption device with solid extrudates of adsorbent material, primarily composed of ZnO and CuO. It performed well, but over a limited amount of time due to fouling created by excess tar/particulate matter and oil aerosols. Overall gas contaminants were reduced to below 1 ppm NH 3 , and less than 1 ppm collective sulfur compounds.

10 SYNTHETIC FUELS↗

Health-based Provisional Advisory Levels (PALs) for Homeland Security

In compliance with Homeland Security Presidential Directive No.8, the US EPA National Homeland Security Research Center, in collaboration with the Department of Energy, is developing health-based Provisional Advisory Levels (PALs) for priority toxic industrial chemicals, pesticides, and chemical warfare agents in air and drinking water. The PALs Program will provide exposure levels to assist emergency response decision-making, and to serve as criteria for determining re-use and re-entry into affected areas resulting from transport/storage accidents, natural disasters, and subversive activities. PALs are applicable at federal, state, and local levels, and are intended for use in homeland security efforts, public health, law enforcement, and emergency response, as well as decisions by water utilities, and national and regional EPA offices. PALS have not been promulgated nor have they been formally issued as regulatory guidance. They are intended to be used at the discretion of risk managers in emergency situations when site specific risk assessments are not available. Three levels (PAL 1, PAL 2, and PAL 3), distinguished by severity of toxic effects, are developed for 24-hour, 30-day, 90-day, and 2-year durations of potential drinking water and inhalation exposures for the general public. Draft PALs are evaluated both by an EPA working group, and an external multidisciplinary panel to ensure scientific credibility and wide acceptance. In this issue, we present background information on the PAL program, the methodology used in deriving PALs, and the technical support documents for the derivation of PALs for acrylonitrile, phosgene, hydrogen chloride, and hydrogen sulfide.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Understanding the origin of structure sensitivity in hydrodechlorination of trichloroethylene on a palladium catalyst

Periodic density functional theory (DFT) calculations are employed to understand the origin of structure sensitivity in hydrodechlorination (HDC) of trichloroethylene (TCE) over different facets of a palladium catalyst. The HDC reaction is simulated on the terrace (Pd (111) and Pd (100)) and undercoordinated (Pd (211) and Pd (110)) sites of the Pd catalyst. The most stable binding configuration of TCE on the Pd surfaces is observed to be through the di-σ mode of binding, wherein each carbon atom of the TCE molecule is adsorbed atop of the Pd atom. On comparing TCE adsorption over different facets of Pd, a maximum binding energy of –178 kJ mol –1 is calculated over the Pd (110) surface. TCE, upon adsorption on Pd catalyst, undergoes dechlorination followed by hydrogenation of the hydrocarbon intermediates. The activation energies for C–Cl bond dissociation steps are significantly low when compared to the hydrogenation steps. The chlorine released from dechlorination tends to block the active sites, thereby poisoning the surface with high binding energies (B.E > –160 kJ mol –1 ) on all the surfaces. The trend in chlorine binding energies on Pd facets follows: Pd (110) > Pd (211) > Pd (100) > Pd (111). The removal of surface chlorine is facilitated by its reaction with surface hydrogen to form hydrogen chloride. The activation energy for hydrogen chloride formation is calculated to be 90 kJ mol –1 and 88 kJ mol –1 on Pd (111) and Pd (100) terrace sites, respectively and 109 kJ mol –1 and 118 kJ mol –1 on the step Pd (211) and corrugated Pd (110) facets, respectively. This suggests the ease of removal of Cl as HCl from the terrace sites as compared to the step and corrugated sites. The structure sensitivity in the TCE HDC reaction could possibly arise due to the differences in the energetics of Cl removal on different Pd facets. As a result, this mechanistic understanding could provide a rationale for designing suitable catalysts for the HDC of TCE.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design of Laboratory System to Recover Tritium from Zirconium Recycle and Plan to Test System

The objective of the tritium separations task is to develop a viable process to separate tritium from the zirconium recycle off-gas stream. In support of this long-term objective, the goal of the present work is to design a test system and prepare a test plan for an alternate tritium capture method suitable for, and compatible with, recycle of the reactive gas (i.e., chlorine) in the zirconium recycle process. The zirconium recycle process is under development to recover zirconium from the Zircaloy® cladding component of used nuclear fuel. Small quantities of all isotopes of hydrogen (all H) are trapped in the Zircaloy as zirconium hydride. Processing releases and converts this hydrogen to hydrogen chloride, including tritium-substitu ted hydrogen chloride, 3 HCl (a.k.a., TCl). This compound of tritium must be removed from the zirconium recycle process off-gas and sequestered to satisfy regulations governing emissions of tritium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reaction of Antimony-Uranium Composite Oxide in the Chlorination Treatment of Waste Catalyst - 13521

The effect of oxygen gas concentration on the chlorination treatment of antimony-uranium composite oxide catalyst waste was investigated by adding different concentrations of oxygen at 0-6 vol% to its chlorination agent of 0.6 or 6 vol% hydrogen chloride gas at 1173 K. The addition of oxygen tended to prevent the chlorination of antimony in the oxide. When 6 vol% hydrogen chloride gas was used, the addition of oxygen up to 0.1 vol% could convert the uranium contained in the catalyst to U{sub 3}O{sub 8} without any significant decrease in the reaction rate compared to that of the treatment without oxygen. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Study of Gallium Arsenide Etching in a DC Discharge in Low-Pressure HCl-Containing Mixtures

Halogen-containing plasmas are often used to form topological structures on semiconductor surfaces; therefore, spectral monitoring of the etching process is an important diagnostic tool in modern electronics. In this work, the emission spectra of gas discharges in mixtures of hydrogen chloride with argon, chlorine, and hydrogen in the presence of a semiconducting gallium arsenide plate were studied. Spectral lines and bands of the GaAs etching products appropriate for monitoring the etching rate were determined. It is shown that the emission intensity of the etching products is proportional to the GaAs etching rate in plasmas of HCl mixtures with Ar and Cl{sub 2}, which makes it possible to monitor the etching process in real time by means of spectral methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ni/YSZ Anode Interactions with Impurities in Coal Gas

Performance of solid oxide fuel cell (SOFC) with nickel/zirconia anodes on synthetic coal gas in the presence of low levels of phosphorus, arsenic, selenium, sulfur, hydrogen chloride, and antimony impurities were evaluated. The presence of phosphorus and arsenic led to the slow and irreversible SOFC degradation due to the formation of secondary phases with nickel, particularly close to the gas inlet. Phosphorus and antimony surface adsorption layers were identified as well. Hydrogen chloride and sulfur interactions with the nickel were limited to the surface adsorption only, whereas selenium exposure also led to the formation of nickel selenide for highly polarized cells.

01 COAL, LIGNITE, AND PEAT↗

Study of the surface of GaAs after etching in high-frequency and glow discharge plasma by atomic force microscopy

The quality of the surface of a semiconductor structure after plasma-chemical etching in plasma of HCl/Ar, HCl/Cl{sub 2}, HCl/H{sub 2} mixtures, and freon R12 plasma is studied. It is shown that the optimal combination of the etch rate and surface roughness is achieved in the hydrogen chloride and argon mixture. In mixtures with hydrogen, the etch rates are too low for high surface quality; in mixtures with chlorine, the surface roughness exceeds technologically acceptable values due to high etch rates. The high-frequency discharge in freon R12 can be effectively used to etch semiconductors, providing technologically acceptable interaction rates, while retaining a uniform and clean surface.

36 MATERIALS SCIENCE↗