SEARCH · Search NASA
Results for “HYDROGEN COMPOUND”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Network stability of FKM rubber compounds under hydrogen pressure
Fluorocarbon-based rubber (FKM) compounds are typically utilized in the aeronautical industry due to its exceptional chemical and thermal resistance and recently has drawn significant interest from the hydrogen community for various hydrogen applications, but there exists little data evaluating its hydrogen compatibility. In this paper, a formulated FKM compound was exposed to ultrahigh hydrogen pressure (90 MPa) and analyzed by attenuated total reflectance Fourier-transform infrared (ATR-FTIR) spectroscopy and crosslinking densities by solvent swelling measurement. ATR-FTIR spectroscopic data demonstrated that high-pressure hydrogen not only caused cleavages in polymer backbone and cross linkages, but also induced additional degradation of FKM compounds by breaking intermolecular hydrogen bonding between carboxylic acids, which were produced during rubber molding and post curing processes. This hydrogen pressure-driven degradation was significantly higher towards the core of the material than at the surface due to its weaker bonding between polymers and fillers.
Electrocatalytic Hydrogenation of Oxygenated Compounds in Aqueous Phase
Electrocatalytic hydrogenation is a fascinating strategy to hydrogenate biogenic compounds at ambient conditions by replacing the thermal and H2 inputs by cathodic potential. This work compares the performance of this approach (in aqueous phase at room temperature) for a variety of model oxygenated compounds reacted over a series of metals. The target functionalities were carbonyl groups, aromatic rings, and ether bonds. All metals explored (Pt, Rh, Pd, Cu) are active for the reduction of carbonyl compounds to alcohols. For instance, conversion rates of benzaldehyde increased as a function of metal as: Pt < Rh < Pd (Cu was tested at different conditions). In contrast, only Rh and Pt were found active for hydrogenation of aromatic rings (Rh was more active than Pt). Comparing among the target functionalities, carbonyl groups are more reactive than aromatic rings and ether bonds in phenolic compounds and di-aryl ethers on all explore metals. This carbonyl reactivity, however, is enabled by the aromaticity of the molecule. Hence, the reactivity trend of the examined molecules is: butyraldehyde < furfural < acetophenone < benzaldehyde. For phenolic compounds, phenol is more reactive than cresol and methoxy phenol. Thus, the presence of substituting groups at the functionality being converted (either carbonyl or aromatic ring) decreases conversion rates. Ether bonds are cleaved under electrocatalytic conditions, which opens two main pathways for the conversion of aryl ethers: hydrogenation of the aromatic ring and hydrogenolysis of the ether bonds, whereas hydrolysis occurs as a minor pathway. Electrocatalytic hydrogenation competes with the H2 evolution reaction at the conditions of the tests, therefore Faradaic efficiency (fraction of current utilized in hydrogenation) and hydrogenation rates are correlated. That is, within the potential range explored, increasing hydrogenation rates lead to higher Faradaic efficiencies. The slope of this correlation, however, depends on the potential and on the functionality being hydrogenated. Keywords: Hydrogenation, electrocatalysis, metal catalysis, aqueous phase hydrogenation, biomass conversion. Acknowledgements The authors would like to thank Yang Song, Prof. Johannes Lercher, and the group of Prof. Hubert A. Gasteiger at the Technische Universität München for advice and support. The authors are grateful to Donald M. Camaioni, Nirala Singh, and Juan Herranz for fruitful discussions. The research described in this paper is part of the Chemical Transformation Initiative at Pacific Northwest National Laboratory (PNNL), conducted under the Laboratory Directed Research and Development Program at PNNL, a multi-program national laboratory operated by Battelle for the U.S. Department of Energy.
Understanding the Role of Metal and Molecular Structure on the Electrocatalytic Hydrogenation of Oxygenated Organic Compounds
Electrocatalytic hydrogenation is increasingly studied as an alternative to integrate the utilization of recycled carbon feedstocks with renewable energy sources. However, the abundant empiric observations available have not been correlated with fundamental properties of substrates and catalysts. In this paper, we investigated the electrocatalytic hydrogenation of homologues series of carboxylic acids, ketones, phenolics, and aldehydes on a variety of metals (Pd, Rh, Ru, Cu, Ni, Zn, and Co). We found that the rates of carbonyl reduction in aldehydes correlate with the corresponding binding energies between the aldehydes and the metals according to the Sabatier principle. That is, the highest rates are obtained at intermediate binding energies. The rates of H 2 evolution, occurring in parallel to hydrogenation, also correlate with the H-metal binding energies, following the same Volcano-type behavior. Within the boundaries of this model (e.g., compounds reactive at room temperature and without important steric effects over the carbonyl group), the reported correlations help to explain the complex trends derived from the experimental observations, allowing for the correlation of rates with binding energies and the differentiation of mechanistic routes.
Performance of Base and Noble Metals for Electrocatalytic Hydrogenation of Bio-Oil-Derived Oxygenated Compounds
Electrocatalytic hydrogenation is a particularly attractive approach for converting the most unstable compounds in biogenic feedstocks at ambient conditions without external hydrogen. Here, we synthesized a variety of carbon-supported transition metal catalysts and characterized their activity for the electrocatalytic hydrogenation of a series of model compounds and pyrolysis oil. Carbonyl compounds, especially aromatic aldehydes, such as furfural and benzaldehyde, are particularly inclined to hydrogenation driven by an applied current. This was verified with pure solutions of the model compounds and with pyrolysis oil, where we achieved stable and steady continuous operation on Pd. By choosing the optimal catalyst composition, the conversion of benzaldehyde shifted from alcohol production (e.g., on Pd and Cu) to dimerization (e.g., on Co, Ni, and Zn). Pd and Cu were shown to offer the best compromise between reaction rates and efficiency although, in general, base metals offer similar conversions but better efficiencies that noble metals. Thus, the present work offers foundational results and guidelines for choosing the optimal metal catalyst and the applied potential for processing organic feedstocks as a function of its composition.
Syntheses and characterization of isotopically labeled 1,3,5-triamino-2,4,6-trinitrobenzene (TATB)
Synthesis and characterization of chemical analogues of TATB, where specific atoms in the structure have been isotopically substituted, are reported. 15 N, 2 H, and 18 O have replaced the naturally occurring isotope distributions in the amino and/or the nitro attendant sites and 13 C has replaced the carbon in the ring structure. A modified wet-amination method was used to produce the analogues, and the isotopic replacements were performed by selective choice of labeled precursors. Four 15 N-labeled compounds (N replaced in the amino and nitro positions), two deuterium-labeled compounds (hydrogens replaced on the amino groups), and one 13 C-labeled compound (C in the ring substituted) were synthesized of high isotopic and chemical purity. One partially labeled 18 O-labeled compound (O in the nitro position) was a result of incomplete labeling due to exchange reactions during synthesis. The compounds were characterized by various spectroscopic methods – mass spectrometry (MS), solid-state nuclear magnetic resonance (SS-NMR), infrared (FTIR), powder x-ray diffraction (PXRD), and differential scanning calorimetry (DSC), depending upon the substitution. In conclusion, these compounds have been critical to the efforts in understanding the decomposition pathways of TATB when exposed to abnormal thermal environments.
Interplay Between Kondo and Magnetic Interactions in Pr 0.75 Gd 0.25 ScGeH
Combined experimental and density functional theory (DFT) study of Pr 0.75 Gd 0.25 ScGe and its hydride (Pr 0.75 Gd 0.25 ScGeH) reveals intricacies of composition-structure-property relationships in those distinctly layered compounds. Hydrogenation of the intermetallic parent, crystalizing in a tetragonal CeScSi-type structure, leads to an anisotropic volume expansion, that is, a(=b) lattice parameter decreases while the lattice expands along the c direction, yielding a net increase of cell volume. DFT calculations predict an antiparallel coupling of localized Gd and Pr magnetic moments in both materials at the ground state. While experiments corroborate this for the parent compound, there is no conclusive experimental proof for the hydride, where Pr moments do not order down to 3 K. DFT results also reveal that rare-earth – hydrogen interactions reduce spin-polarization of the Pr and Gd 5d and Sc 3d states at the Fermi energy, disrupt indirect exchange interactions mediated by conduction electrons, dramatically reduce the magnetic ordering temperature, and open a pseudo-gap in the majority-spin channel. Here, both experiments and theory show evidence of Kondo-like behavior in the hydride in the absence of an applied magnetic field, whereas increasing the field promotes magnetic ordering and suppresses Kondo-like behavior.
BayoTech Risk and Modeling Support of NM Gas Site
The BayoTech hydrogen generation system has been evaluated in terms of safety considerations at the NM Gas site. The consequence of a leak in different components in the system was evaluated in terms of plume dispersion and overpressure. Additionally, the likelihood of a leak scenario for different hydrogen components was identified. The worst-case plume dispersion cases, full-bore leaks, resulted in relatively large plumes. However, these cases were noted to be far less likely than the partial break cases that were evaluated. The partial break cases resulted in nearly negligible plume lengths. Similarly, the overpressure analysis of the full-bore break scenarios resulted in much larger overpressures than the partial break cases (which resulted in negligible overpressure at the lot line). There were several cases evaluated in the analysis that represented leak scenarios from both hydrogen and natural gas sources. Generally, the natural gas leak scenarios resulted in a smaller horizontal impact than that of hydrogen leaks. The worst-case consequence from a hydrogen leak resulted from the compressors, storage pods, or dispensing system. To consider the safety features that may isolate the leak, the consequence was evaluated at different times after the leak event to show the reduction of pressure. After 2 seconds, the plume dispersion from this event is contained within the perimeter of the site. The worst-case consequences show that the plume may disperse to adjacent facilities and to the street. When considering both likelihood and consequence, the risk may be considered low because the maximum frequency of a full-bore leak from any component within the hydrogen compound is 8.2 E-5/yr. This means that a full-bore leak is expected to occur less than once every 10,000 years. The risk can be further reduced by implementing mitigative countermeasures, such as CMU walls along the sides of the equipment compound. This would reduce the overall consequence of the worst-case dispersion scenarios (horizontal impact of plume). In terms of siting and safety analysis, the NFPA 2 code was used to provide a high-level evaluation of the current site plan. The most limiting equipment in terms of set-back distance are the compressors/storage units because of the high-pressure hydrogen. The site layout was evaluated for an acceptable location for the compression/storage unit based on NFPA 2 set-back distances. It is important to note that the NFPA 2 set-back distances consider both likelihood and consequence. This is important because the worst-case results evaluated herein also represent the least likely leak scenario. Other site-specific considerations were evaluated, including the parking shade structure with photovoltaic cells and refueling vehicles. These issues were dispositioned and determined to not present a safety risk.
Sooting tendencies of terpenes and hydrogenated terpenes as sustainable transportation biofuels
Terpenes are a diverse group of molecules that are synthesized by plants and microorganisms through combining units of isoprene (2-methyl-1,3-butadiene). They typically contain rings and methyl branches, which gives them high energy densities and low freezing points and makes them appealing candidates for sustainable transportation biofuels. Between the original biosynthesis and upgrading options such as hydrogenation, they have a large degree of freedom of structures, e.g., different carbon skeletons, positions of double bonds, and functional groups. Therefore, structure-property data is needed to downselect potential fuel candidates. Here, we measured the sooting tendencies of 17 C10 monoterpenes and 7 of their hydrogenated analogues. The hydrogenated compounds were custom synthesized, so the quantities were too small for conventional smoke point measurements. Thus, the sooting tendencies were quantified with yield sooting index (YSI), which is based on the soot yield in a fuel-doped non-premixed methane flame. Derived smoke points (DSPs) were estimated from a correlation between YSI and smoke point for other hydrocarbons. The YSI of terpenes and their derivatives varies widely from 85.6 to 248.5. The YSI follows the trend: terpenes > dihydroterpenes > tetrahydroterpenes. The DSPs of all the tetrahydroterpenes and some dihydroterpenes are higher than that of a Jet-A fuel sample, suggesting that they offer soot reduction benefits. Further, the YSIs depend strongly on molecular structure; for example, α-pinene and β-pinene have identical carbon skeletons and differ only in the position of one carbon-carbon double bond, but the YSI of α-pinene is 34% higher than that of β-pinene. Detailed decomposition analysis via density functional theory (DFT) suggests that compared with β-pinene, α-pinene requires fewer steps to form the first aromatic ring and the process is more thermodynamically favorable. The YSI difference between the pinenes is mainly affected by the identity of the products from the dominant decomposition pathways.
Computational electron–phonon superconductivity: from theoretical physics to material science
The search for room-temperature superconductors is a major challenge in modern physics. The discovery of copper-oxide superconductors in 1986 brought hope but also revealed complex mechanisms that are difficult to analyze and compute. In contrast, the traditional electron–phonon coupling (EPC) mechanism facilitated the practical realization of superconductivity (SC) in metallic hydrogen. Since 2015, the discovery of new hydrogen compounds has shown that EPC can enable room-temperature SC under high pressures, driving extensive research. Advances in computational capabilities, especially exascale computing, now allow for the exploration of millions of materials. This paper reviews newly predicted superconducting systems in 2023–2024, focusing on hydrides, boron–carbon systems, and compounds with nitrogen, carbon, and pure metals. Although many computationally predicted high-T c superconductors were not experimentally confirmed, some low-temperature superconductors were successfully synthesized. This paper provides a review of these developments and future research directions.
Charge Transfer between Layers in a Bilayer Quasi-Two-Dimensional (BEDT-TTF){sub 4}CoBr{sub 4}(C{sub 6}H{sub 4}Cl{sub 2}) Organic Metal
Based on the analysis of the behavior of the magnetoresistance, the regime of interlayer charge transport in a bilayer quasi-two-dimensional (BEDT-TTF){sub 4}CoBr{sub 4}(C{sub 6}H{sub 4}Cl{sub 2}) organic metal is discussed. It is noted that a strongly incoherent mode is the most likely in the entire temperature range 1.5–300 K. The metallic type of the temperature dependence of the interlayer resistance at low temperatures is most likely associated with charge transfer through resonant impurities.
Substrate–Support Interactions Mediate Hydrogenation of Phenolic Compounds by Pd/CeO 2 Nanorods
Ceria-supported palladium (Pd/CeO 2 ) has spawned significant attention in recent years due to its ability to catalyze selective hydrogenation of phenolic compounds to cyclohexanones and cyclohexanols at a mild temperature and pressure. However, the mechanistic basis by which ceria enhances catalytic conversion is still unclear. Here, we use the increase in the 13 C transverse relaxation rate upon the addition of nanoparticles (NPs) ( 13 C ΔR 2 ) to investigate the adsorption of phenolic compounds on the surface of the Pd/CeO 2 catalyst by solution NMR. We show that hydroxyphenols adsorb on the support more efficiently than underivatized phenol and methoxyphenols and that phenol derivatives with an oxygen atom at position 2 (i.e., 2-hydroxyphenol and 2-methoxyphenol) form very stable interactions with the Pd site of Pd/CeO 2 . An analysis of the kinetics of hydrogenation revealed that catalytic conversion is linearly correlated with the ability of the substrate to form interactions with the CeO 2 support and is inhibited by the formation of stable substrate–Pd adducts. Our data suggest that CeO 2 –substrate interactions mediate phenol hydrogenation more efficiently than Pd–substrate interactions and explain the exceptional catalytic performance reported for Pd/CeO 2 .
Method for mitigating thermal aging of permanent magnets in organic liquid
An electric motor is provided for use in an electromechanical transmission that utilizes automatic transmission fluid. The electric motor includes a stator and a rotor. The rotor includes a plurality of permanent magnets can include magnetic particles coated with hydrogen impermeable material. According to an alternative embodiment, the entire permanent magnet or the rotor itself can be coated with hydrogen impermeable material. According to a further alternative embodiment, the permanent magnet particles can be secured by a binder that includes a hydrogen storage compound that prevents hydrogen from affecting magnetic properties of the permanent magnet.
Symmetrization of Strong Hydrogen Bond under High Pressure in Bihydroxide-Ion-Containing NaCu 2 (SO 4 ) 2 ·H 3 O 2 Revealed by Experimental Charge Density, Single-Crystal Electron Diffraction, and Neutron Diffraction Studies
In minerals and inorganic compounds, strong hydrogen bonding can lead to the formation of complex ionic species such as the H 3 O 2 – bihydroxide anion and Zundel cation H 5 O 2 + . We studied [NaCu 2 (SO 4 ) 2 ·H 3 O 2 ] natrochalcite, which contains bihydroxide anions and undergoes hydrogen bond symmetrization at the lowest pressure reported so far among inorganic compounds. Hydrogen bond symmetrization leads to changes in the bulk modulus, seismic wave velocities, and proton mobility and plays a primary role in high-temperature superconductivity, but its characteristics are not well understood due to a lack of systematic studies and limitations of experimental methods sensitive to this subtle change. In this work, we applied experimental charge density analysis based on in situ single-crystal X-ray diffraction data, along with the single-crystal neutron and electron diffraction experiments, to probe the behavior of hydrogen atoms during the hydrogen bond symmetrization process under high-pressure conditions. On the way to the symmetrical H-bonding, natrochalcite undergoes a series of complex redistributions of electron density, which we trace with multipole refinement and detailed analysis of changes in the Laplacian of electron density values. Additionally, we deconvoluted the equation of state (volume of the unit cell vs pressure relation) into the atomic equation of states describing dependencies of atomic charges or volumes vs pressure.
Density functional theory study of formation and diffusion of hydrogen, deuterium, and tritium in Pd-V intermetallic compounds
Permeation of hydrogen isotopes in palladium/vanadium bimetallic membranes is known to deteriorate over time because of Pd-V interdiffusion. Additionally, intermetallic compounds may form in the interdiffusion region. Density functional theory is employed to study how Pd-V compounds may affect the permeation. Three compounds Pd 8 V, alpha-Pd 2 V, and PdV 4 are explored in this study. Formation and migration energies of hydrogen, deuterium, and tritium are calculated and subsequently compared to the data in pure Pd and V metals. The calculations show that both the formation and migration energies in the compounds are higher than in the pure metals. Thus, the permeation of these isotopes in the compounds is lower than in the pure metals. In addition, the least permeable compound is the one near the middle of the composition range, i.e. the alpha-Pd 2 V. The results provide atomistic insight for the permeation reduction in Pd/V membranes as interdiffusion progresses.