SEARCH · Search NASA
Results for “HYDROGEN ION”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Electrostatic ion (hydrogen) cyclotron and ion acoustic wave instabilities in regions of upward field-aligned current and upward ion beams
An investigation is made into the stability of electrostatic hydrogen ion cyclotron and ion acoustic waves in a model plasma where an ion beam, population 2, and oppositely directed drifting electrons pass through a stationary ion background, population 1. The excited wave properties are then compared with the characteristics of the unstable modes observed on the S3-3 satellite. Three temperature regimes are studied: (1) Te greater than Ti2 much greater than Ti1, (2) Ti2 greater than Te not less than Ti1, and (3) Te approximately equal to Ti1 greater than Ti2. It is found that the ion beam acts as a free energy source only in regime 1. This regime is also highly unstable to the electrons as a free energy source. Unstable modes in regimes 2 and 3 seem to best satisfy the electrostatic hydrogen cyclotron wave (EHC) properties at 1 earth radius. For these cases the electrons are the free energy source, the beam supplies damping.
Development of activity–descriptor relationships for supported metal ion hydrogenation catalysts on silica
With the increasing attention on single-site heterogeneous catalysts on account of their high specific activity, more effective catalyst design strategies are necessary. We demonstrate a first-principles-calculation-guided active-site design strategy for alkene hydrogenation using silica-supported single-atom single-site heterogeneous catalysts (SSHCs, i.e., M/SiO2). An activity-descriptor relationship for propylene hydrogenation was established using representative catalysts (i.e., Ga3+, Zn2+, Mn2+ and Ti4+/SiO2), correlating the computational activity descriptor (i.e., the reaction free energy of the metal hydride formation) with the experimental reaction rates. Microkinetic modeling confirmed the predicted reaction mechanisms and further explained the rationale of the activity-descriptor relationship. This relationship was then used to predict the trend of activities of a variety of isolated ions on silica, and an In3+/SiO2 catalyst was identified as the most promising candidate based on its predicted activity and synthetic feasibility. The monodispersed In3+/SiO2 catalyst was then synthesized, for the first time, and showed higher propylene hydrogenation activity than the other four single-atom SSHCs, as predicted. Detailed spectroscopic characterization (XAS, XPS, DRIFTS and DRUV-Vis) provided insights into coordination environments and oxidation states of the catalysts, as well as evidence for the hydride intermediate. The successful discovery of the In3+/SiO2 catalyst for propylene hydrogenation using the first-principles-calculations-guided design strategy opens up new opportunities for efficient development of single-atom SSHCs.
Negative hydrogen ion sources for particle accelerators: Sustainability issues and recent improvements in long-term operations
High brightness, negative hydrogen ion sources are used extensively in scientific facilities operating worldwide. Negative hydrogen beams have become the preferred means of filling circular accelerators and storage rings as well as enabling efficient extraction from cyclotrons. Several well-known facilities now have considerable experience with operating a variety of sources such as RF-, filament-, magnetron- and Penning-type H- ion sources. These facilities include the US Spallation Neutron Source (SNS), Japan Proton Accelerator Research Complex (J-PARC), Rutherford Appleton Laboratory (RAL-ISIS), Los Alamos Neutron Science Center (LANSCE), Fermi National Accelerator Laboratory (FNAL), Brookhaven National Laboratory (BNL), numerous installations of D-Pace (licenced by TRIUMF) ion sources used mainly on cyclotrons and, most recently, the CERN-LINAC-1 injector. This report first summarizes the current performance of these ion sources in routine, daily operations with attention toward source service-periods and availability metrics. Sustainability issues encountered at each facility are also reported and categorized to identify areas of common concern and key issues. Recent ion source improvements to address these issues are also discussed as well as plans for meeting future facility upgrade requirements.
Comparison of coincident OGO 3 and OGO 4 hydrogen ion composition measurements
Simultaneous hydrogen ion composition measurements by upper ionospheric polar orbiting OGO 4 and eccentric orbiting magnetospheric OGO 3 at midlatitude
Numerical Modeling of Ion-Optical Systems for Extraction of a Beam of Negative Hydrogen Ions and Its Acceleration and Matching with a Radio-Frequency Quadrupole Accelerator
A source of negative hydrogen ions is constructed at the Institute for High Energy Physics in order to raise the intensity of the U-70 accelerator complex using multiturn charge-exchange injection. The 3D ion-optical IBSimu simulation package was used to model and optimize the system for extraction of an ion beam from plasma, its acceleration to 100 keV, and matching with a radio-frequency quadrupole (RFQ) accelerator. The system of extraction of an ion beam with a current of 50 mA and electron-flow suppression was modeled. The magnetic transport channels with two solenoids and six quadrupole lenses were compared. The end goals of analysis of the matching channel were to obtain the needed Twiss parameters and to minimize the emittance growth at the RFQ input.
Some deductions from a measurement of the hydrogen ion distribution in the high atmosphere
Hydrogen ion distribution in upper atmosphere
Electron-irradiation-induced Cr segregation in Fe-Cr model alloy pre-implanted with hydrogen ions
Highlights: • Streaks appeared in the diffraction patterns of hydrogen-implanted Fe-Cr alloy after electron irradiation in an HVEM. • A kind of needle-like Cr precipitates give rise to the streaks. • The streaks are explained reasonably by shape effect of precipitates. - Abstract: Reduced activation ferritic/martensitic (RAFM) steels are widely accepted as the candidate structural materials for fusion reactors. To gain knowledge about Cr behaviour of these steels in such environments, Fe-Cr binary alloys have to be investigated. In this study, Fe-10 at.% Cr ferritic model alloy pre-implanted with hydrogen ions was electron-irradiated in a high voltage electron microscope (HVEM) at the temperature ranging from 300 °C to 600 °C. Streaks were observed in the diffraction patterns in the model alloy after electron irradiation at 450–550 °C and explained reasonably by shape effect. The analysis of transmission electron microscopy (TEM) reveals that the observed streaks are induced by a kind of needle-like precipitates with the directions along <100>. The dependence of the length and density of the precipitates on the temperature were studied. In addition, contrast experiments were conducted with pure Fe and Fe-10 at.% Cr alloy with and without hydrogen ion implantation, respectively. After electron irradiation, no streak was observed in the hydrogen-implanted pure Fe and Fe-10 at.% Cr alloy without the hydrogen implantation. Therefore, it is assumed that the needle-like precipitates could be the complex of Cr and H, which segregate and precipitate along <100> direction.
Use of low energy hydrogen ion implants in high efficiency crystalline silicon solar cells
This program is a study of the use of low energy hydrogen ion implantation for high efficiency crystalline silicon solar cells. The first quarterly report focuses on two tasks of this program: (1) an examination of the effects of low energy hydrogen implants on surface recombination speed; and (2) an examination of the effects of hydrogen on silicon regrowth and diffusion in silicon. The first part of the project focussed on the measurement of surface properties of hydrogen implanted silicon. Low energy hydrogen ions when bombarded on the silicon surface will create structural damage at the surface, deactivate dopants and introduce recombination centers. At the same time the electrically active centers such as dangling bonds will be passivated by these hydrogen ions. Thus hydrogen is expected to alter properties such as the surface recombination velocity, dopant profiles on the emitter, etc. In this report the surface recombination velocity of a hydrogen emplanted emitter was measured.
A simple correction for the Born approximation for electron impact excitation of hydrogenic ions
An analytic procedure is developed for obtaining the electron impact excitation cross sections for hydrogenic ions. A simple modification of the Born approximation, in order to include Coulomb focusing of the continuum wave functions, produces the correct energy dependence of the cross section near excitation threshold. This procedure is used to compute the 1s yields 2s and 1s yields 2p excitation cross sections for hydrogenic ions (Z approaches infinity), and compare these modified-Born cross sections with numerical Colomb-Born calculations. The modified-Born cross sections agree well with the Coulomb-Born cross sections and thus provide a reliable generalized analytic expression for electron impact excitation of hydrogenic ions. By treating effective charges, the results in this work can be extended to nonhydrogenic target systems.
DIRECT MEASUREMENTS OF HELIUM AND HYDROGEN ION CONCENTRATION AND TOTAL ION DENSITY TO AN ALTITUDE OF 940 KILOMETERS
Helium and hydrogen ions, used to calculate atmospheric temperature, ion mass and ion concentration as functions of altitude
Hydrogen ion velocity distributions in the ionosphere.
Hydrogen ion velocity distributions applied to ionospheric measurements
Two-step process to increase atomic hydrogen ion production in low-pressure radiofrequency discharge
Increased production of atomic hydrogen ion in low pressure radiofrequency discharge by two step process
Surface blistering of metals due to low energy hydrogen ion bombardment.
Surface blistering of metals due to low energy hydrogen ion bombardment, determining solar absorptance change in gold-plated specimens
Dissociative electron recombination and rotational cooling of the deuterated triatomic hydrogen ions H 2 D + and D 2 H +
We have measured the dissociative recombination (DR) of the deuterated triatomic hydrogen ions H 2 D + and D 2 H + as a function of storage time at the Cryogenic Storage Ring (CSR). Both molecular ions were stored for up to 1000 s inside the cryogenic vacuum of the CSR prior to the electron recombination measurements, allowing them to cool to their lowest rotational states. We implement a comprehensive model for all relevant processes to predict the internal state evolution of the ions during storage inside the CSR, employing calculated radiative transition strengths and state-selective rate coefficients for electron collisions. Our DR rate coefficient measurements with deuterated triatomic hydrogen ions in defined quantum states allow for meaningful comparisons with state-of-the-art theoretical calculations, paving the way for a better understanding of the complex DR process for polyatomic molecular ions.
Benchmarking and validation of global model code for negative hydrogen ion sources
Benchmarking and validation are prerequisites for using simulation codes as predictive tools. In this work, we have developed a Global Model for Negative Hydrogen Ion Source (GMNHIS) and performed benchmarking of the GMNHIS against another independently developed code, Global Enhanced Vibrational Kinetic Model (GEVKM). This is the first study to propose a quite comprehensive benchmarking test of this kind for models of negative hydrogen ion sources (NHIS), and excellent agreements have been achieved for collisional energy loss per electron-ion pair created, electron number density, electron temperature, densities of H$^{+}_{3}$ and H$^{+}_{2}$ ions, and densities of H(n = 1–3) atoms. Very small discrepancies in number densities of H - ions and H + ions, as well as the vibrational distribution function of hydrogen molecules, can be attributed to the differences in the chemical reactions datasets. The GEVKM includes additional chemical reactions that are more important at high pressures. Moreover, we validated the GMNHIS against experimental data obtained in an electron cyclotron resonance discharge used for H - production. The model qualitatively (and even quantitatively for certain conditions) reproduces the experimental H - number density. The H - number density as a function of pressure first increases at pressures below 1.6 Pa and then saturates for higher pressures. This dependence was analyzed by evaluating contributions from different reaction pathways to the creation and loss of the H - ions. The developed codes can be used for predicting the H - production, improving the performance of NHIS, and ultimately optimizing the parameters of negative ion beams for fusion reactors.
Sequential excitation scheme for laser stripping of hydrogen ion beams
A novel laser stripping scheme based on sequential ex-citation has been proposed for foil-less charge-exchange injection of hydrogen ion (H-) beams. Our analysis indi-cates that the new scheme can save the laser power by an order of magnitude for certain particle beam energies. An application to 1.3-GeV hydrogen ion beams is described.
Determination of hydrogen ion concentration, electron density and proton gyrofrequency from the dispersion of proton whistlers
Hydrogen ion concentration, electron density, and proton gyrofrequency near satellites from asymptotic frequency-time profile of proton whistler near proton gyrofrequency