Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hartley 2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Woody Feedstock 2022 State of Technology Report

The U.S. Department of Energy promotes production of advanced liquid transportation fuels from lignocellulosic biomass by funding fundamental and applied research that advances the state of technology (SOT). As part of its involvement in this mission, Idaho National Laboratory completes an annual SOT report for n th -plant and 1 st -plant woody biomass feedstock logistics. The purpose of the SOT is to provide the status of feedstock supply system technology development for woody biomass to biofuels relative to technical targets and cost goals from specific design cases, based on data and experimental results. Conventional feedstock supply systems need to be modified to meet the demands of conversion pathways, specifically to have the ability to adjust the quality of the raw biomass materials. Advanced systems incorporate innovative methods of material handling, preprocessing and supply chain configuration. In advanced designs, variability of the raw biomass can be reduced to produce feedstocks of a uniform format, moving toward biomass commoditization. Against this backdrop, the 2022 Woody SOT for low-ash woody feedstocks utilizes feedstock fractionation by incorporating technologies that can separate the biomass into its anatomical fractions (wood, bark, needle, and extrinsic ash) to reduce impurities and attempt to maximize the retention of usable fractions that satisfy downstream quality considerations. By using a series of air classification steps, this strategy can reduce the extrinsic ash in forest residues, separate out a majority of the incoming needles (which can be supplied to alternate markets), and maximize the retention of whitewood in the usable fraction. The fractionated forest residues are then mixed with clean-pine chips in a 50-50 blend to prepare the feedstock for the desired conversion pathway. The n th -plant analysis estimated the delivered cost for the feedstock at $\$$69.23/dry ton (2016$\$$) which represents a $\$$6.64/dry ton decrease compared to the cost estimate of the 2021 Woody SOT supply system for low-ash woody feedstocks. The quality requirements in the 2022 Woody SOT were identical to those of the 2021 Woody SOT at = 1.00 wt % ash and = 50.51 wt% carbon. The cost savings derive primarily from reductions in dry matter losses during air classification. The GHG emissions for the n th -plant analysis were estimated at 178.39 kg CO2e/dry ton compared to 178.71 kg CO 2 e/dry ton in the 2021 Woody SOT, a decrease of 0.32 kg CO2e/dry ton. The small change stems from an increase in emissions attributed to preprocessing and slightly larger savings in emissions from transportation. In the 1 st -plant analysis of the 2022 Woody SOT system, the average throughput was estimated to be approximately 2,128 dry tons/day or 96.51% of the name plate capacity. During the simulation the daily throughput ranged from 1,090 dry tons/day to 2,200 dry tons/day, or 49.43% to 99.75% of the daily nameplate capacity. After the year of operation 722,403 tons of processed feedstock were produced in total without regard to quality considerations (99.64% of the annual nameplate capacity). The variability in throughput was primarily caused by equipment failures in the system. Regular failures, downtime caused by routine maintenance per manufacturer guidelines, contributed to a majority 62.50% of failures and 62.60% of downtime. Failures due to wear were the other cause of disruption within the system, impacting the rotary shear and orbital screen and accounting for 37.50% of the failures and 37.40% of the total downtime. Ultimately the system was on stream for 87.84% during the simulation period, which is only 2.16 percentage points below the nth-plant assumption for on-stream time. The production cost of the system averaged $\$$71.66/dry ton. The costs ranged from a minimum of $\$$71.23/dry ton to a maximum of $\$$2,115.30/dry ton. When dry matter losses (disposed low-quality fractions as well as other losses such as in grinders) were considered the costs increased to an average of $\$$75.11/dry ton with a minimum of $\$$74.69/dry ton and a maximum of $\$$2,136.86/dry ton...

09 BIOMASS FUELS↗
DOE OSTI2021

Ex Situ Catalytic Fast Pyrolysis of Lignocellulosic Biomass to Hydrocarbon Fuels: 2020 State of Technology

Biomass catalytic fast pyrolysis (CFP) research was funded by the Bioenergy Technologies Office (BETO) of the U.S. Department of Energy (DOE) to enable technical breakthroughs to help reduce the cost of conversion of biomass to liquid hydrocarbon fuels. The key goals were to achieve a mature plant modeled Minimum Fuel Selling Price of $3/GGE, with greater than 60% greenhouse gas (GHG) reduction over petroleum derived gasoline by 2022. Experimental results at NREL and PNNL, along with lifecycle analysis by ANL show that we achieved these goals based on performance at the bench scale. A Pt/TiO2 catalyst was used in a fixed bed reactor for upgrading pyrolysis vapors from an upstream fast pyrolysis reactor (ex-situ configuration) to produce CFP oil with 16.5% oxygen content. Subsequent co-hydrotreating of 10 vol% of CFP oil with 90 vol% straight run diesel (SRD) at the bench scale yielded greater than 95% carbon efficiency for the CFP oil portion of the feed. Light oxygenated coproducts were recovered from the off gases from the CFP process via adsorption and subsequent desorption. Aspen Plus modeling of purification of the desorbed stream using the UNIFAC property method showed that acetone and methyl-ethyl-ketone can be purified to chemicals grade and sold as coproducts to benefit the economics and reduce GHG emissions attributed to the fuel product. Some of the key risks and uncertainties associated with this process, and potential future work are mentioned in this report.

09 BIOMASS FUELS↗
DOE OSTI2023

Improving knife milling performance for biomass preprocessing by using advanced blade materials

Mechanical preprocessing of biomass, including size reduction, is a crucial step in converting biomass into biofuel. However, feedstock inevitably contains abrasive intrinsic and extrinsic inorganics that may cause excessive tool wear in preprocessing. Here, this work demonstrates that performance of a knife mill can be significantly improved by applying a more wear-resistant blade material. A series of full-scale knife mill tests were performed for size reduction of forest residue using blades of tungsten carbide (WC–Co), iron-borided tool steel, and diamond-like carbon (DLC) coated tool steel. Blade material loss was quantified in correlation to the amount of feedstock processed and wear mechanisms were investigated via worn surface characterization. While the thin DLC coating was removed quickly, the WC-Co and iron-borided blades improved the tool life by 8X and 3X compared with the M2 tool steel blades (baseline), respectively. The in-situ throughput and power consumption measurements provided additional insights. The WC-Co and iron-borided blades had ~3X higher throughput than the baseline blades by the end of the test with lower normalized power consumption. The experimental results were then used as input for a techno-economic analysis, which suggested that the more wear resistant blades could cut the knife milling cost by $2–3 per ton of biomass processed with downtime reduced by 65–85%.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A multi-criteria land suitability assessment of field allocation decisions for switchgrass

With the goal of evaluating biomass resource availability in certain regions in the United States, the Department of Energy, Department of Agriculture, Environmental Protection Agency, national laboratories, and Forest Service research laboratories, together with academic and industry collaborators, performed a resource analysis study, 2016 Billion-Ton Report: Advancing Domestic Resources for a Thriving Bioeconomy, Volume 1: Economic Availability of Feedstocks, using POLYSYS model to estimate biomass potential. The study provided county- and state-level biomass potential projections, with biomass feedstock production estimates and suitability assessment of lands acreage likely to transition to energy crops. For this analysis, we estimate biomass supply by year 2028, more specifically, lands acreage transition to switchgrass in the Midwest of the United States, across 50 counties in 3 states (Nebraska, Kansas, and Colorado). We propose a multi-criteria site suitability framework, to determine the potential acreage and production for switchgrass, at the field level. Site selection criteria span agronomic and ecosystem services such as previous land cover, crop rotation, soil water holding capacity, crop productivity, field efficiency, topography, soil organic matter, soil leaching propensity, distance to surface water bodies, and soil erosivity. Efficient agricultural field selection for dedicated energy crops field allocation is critical to evaluate biomass resource availability, and it is our position that estimation at the field level would provide a more accurate and useful estimation to support an emerging bioeconomy. Using field suitability scores and county-level assessments, we model land allocation decision for energy crop in the future, estimating the spatial distribution of dynamics of energy crop adoption with priority to fields scoring the highest. Additionally, compared with POLYSYS results from the report mentioned above, our method shows good performance overall, with about 2% and 1.2% of difference in switchgrass acreage allocation and crop production, respectively.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Determination of the spins and parities for the 0$^{+}_{4}$ and 0$^{+}_{5}$ states in 100 Zr

Here, two 0 + states at 1294.5 and 1774.0 keV, together with three 2 + and one 4 + levels, were identified or unambiguously spin-parity assigned for the first time in 100 Zr utilizing γ-ray spectroscopy and γ–γ angular correlation techniques with the Gammasphere spectrometer, following the β – decay of neutron-rich, mass-separated 100,100m Y isotopes. Comparisons with recent Monte Carlo shell-model calculations indicate that these two states are candidates for the bandhead of a sequence in a shape-coexisting spherical minimum predicted to be located around ≈1500 keV. According to the measured relative B(E2) relative transition probabilities, the 0$^+_5$ state exhibits decay properties which more closely align with those predicted for a spherical shape, while the 0$^+_4$ level is suggested to be associated with a weakly deformed shape similar to one related to the 0$^+_2$ state.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Determination of the spins and parities for the $0^+_4$ and $0^+_5$ states in $^{100}Zr$

Two 0 + states at 1294.5 and 1774.0 keV, together with three 2 + and one 4 + levels, were identified or unambiguously spin-parity assigned for the first time in 100 Zr utilizing γ-ray spectroscopy and γ-γ angular correlation techniques with the Gammasphere spectrometer, following the β - decay of neutron-rich, mass separated 100,100m Y isotopes. Comparisons with recent Monte Carlo Shell-Model (MCSM) calculations indicate that these two states are candidates for the bandhead of a sequence in a shape-coexisting spherical minimum predicted to be located around ≈1500 keV. According to the measured relative B(E2) relative transition probabilities, the 0+ 5 state exhibits decay properties which more closely align with those predicted for a spherical shape, while the $0^+_4$ level is suggested to be associated with a weakly-deformed shape similar to one related to the $0^+_2$ state.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Determination of the spins and parities for the $0$$^{+}_{4}$ and $0$$^{+}_{5}$ states in 100 Zr

Two 0 + states at 1294.5 and 1774.0 keV, together with three 2 + and one 4 + levels, were identified or unambiguously spin-parity assigned for the first time in 100 Zr utilizing γ-ray spectroscopy and γ-γ angular correlation techniques with the Gammasphere spectrometer, following the β¯ decay of neutron-rich, mass separated 100,100m Y isotopes. Comparisons with recent Monte Carlo Shell-Model (MCSM) calculations indicate that these two states are candidates for the bandhead of a sequence in a shape-coexisting spherical minimum predicted to be located around ≈1500 keV. According to the measured relative B(E2) relative transition probabilities, the $0$$^{+}_{5}$ state exhibits decay properties which more closely align with those predicted for a spherical shape, while the $0$$^{+}_{4}$ level is suggested to be associated with a weakly-deformed shape similar to one related to the $0$$^{+}_{2}$ state.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Supply Chain Sustainability Analysis of Renewable Hydrocarbon Fuels via Indirect Liquefaction, Ex Situ Catalytic Fast Pyrolysis, Hydrothermal Liquefaction, Combined Algal Processing, and Biochemical Conversion: Update of the 2020 State-of-Technology Cases

The Department of Energy’s (DOE) Bioenergy Technologies Office (BETO) aims to develop and deploy technologies to transform renewable biomass resources into commercially viable, high-performance biofuels, bioproducts, and biopower through public and private partnerships (U.S. Department of Energy, 2016). BETO and its national laboratory teams conduct in-depth techno-economic assessments (TEA) of biomass feedstock supply and logistics and conversion technologies to produce biofuels. There are two general types of TEAs: A design case outlines a target case (future projection) for a particular biofuel pathway. It enables identification of data gaps and research and development needs and provides goals and benchmarks against which technology progress is assessed. A state of technology (SOT) analysis assesses progress within and across relevant technology areas based on actual results at current experimental scales relative to technical targets and cost goals from design cases, and includes technical, economic, and environmental criteria as available. In addition to developing a TEA for a pathway of interest, BETO also performs a supply chain sustainability analysis (SCSA). The SCSA takes the life-cycle analysis approach that BETO has been supporting for about 20 years. It enables BETO to identify energy consumption, environmental, and sustainability issues that may be associated with biofuel production. Approaches to mitigate these issues can then be developed. Additionally, the SCSA allows for comparison of energy and environmental impacts across biofuel pathways in BETO’s research and development portfolio. This technical report describes the SCSAs for the production of renewable hydrocarbon transportation fuels via a range of conversion technologies in the 2020 SOTs: (1) renewable high octane gasoline (HOG) via indirect liquefaction (IDL) of woody lignocellulosic biomass (note that the IDL pathway in this SCSA represents the syngas conversion design [Harris et al. 2021]); (2) renewable gasoline (RG) and diesel (RD) blendstocks via ex situ catalytic fast pyrolysis of woody lignocellulosic biomass [Abhijit et al. 2021]; (3) RD via hydrothermal liquefaction (HTL) of wet sludge from a wastewater treatment plant; (4) renewable hydrocarbon fuels via biochemical conversion of herbaceous lignocellulosic biomass (Davis et al. 2021; Lin et al. 2021); (5) renewable diesel via HTL of a blend of algae (Davis and Klein, 2021) and woody biomass (Hartley et al. 2020); and (6) renewable diesel via combined algae processing (CAP) (Wiatrowski and Davis, 2021). This technical report focuses on the environmental performance of these six biofuel production pathways in their 2020 SOT cases. The results of these renewable hydrocarbon fuel pathways in these SCSA analyses update those for the respective 2019 SOT cases (Cai et al. 2020). They also provide an opportunity to examine the impact of technology improvements in both biomass feedstock production and biofuel production that have been achieved in 2020 SOTs on the sustainability performance of these renewable transportation fuels. The SCSA results also reflect updates to Argonne National Laboratory’s Greenhouse gases, Regulated Emissions, and Energy use in Technologies (GREET®) model, which was released in October 2020 (Wang et al. 2020). These GREET updates include the production of natural gas, electricity, and petroleum-based fuels that can influence biofuels’ supply chain greenhouse gas (GHG) (CO 2 , CH 4 , and N 2 O) emissions, water consumption, and air pollutant emissions. GHG emissions, water consumption, and nitrogen oxides (NO x ) emissions are the main sustainability metrics assessed in this analysis. In this analysis, we define water consumption as the amount of water withdrawn from a freshwater source that is not returned (or returnable) to a freshwater source at the same level of quality. Life-cycle fossil energy consumption and net energy balance, which is the life-cycle fossil energy consumption deducted from the renewable biofuel energy produced, are also assessed.

09 BIOMASS FUELS↗
DOE OSTI2021

High-Octane Gasoline from Lignocellulosic Biomass via Syngas and Methanol/Dimethyl Ether Intermediates: 2020 State of Technology

The 2020 state of technology (SOT) serves as an update to the 2019 SOT report and details the techno-economic analysis (TEA) results for producing high-octane gasoline (HOG) via indirect liquefaction (IDL). This report only describes changes to the experimental and analysis results from previous SOTs; more details regarding the full process design can be found in the 2015 design report. The conversion pathway presented in this report includes the gasification of biomass, steam reforming and cleanup of the syngas, followed by the conversion of the syngas to HOG via methanol and dimethyl-ether (DME) intermediates. Research efforts in 2020 included the collection of experimental results over a variety of isobutane (iC4) to DME ratios in the feed of the DME-to-HOG reactor, enabling the TEA to identify the effect on modeled product yield and cost. Additionally, a significant re-build of the Aspen Plus model allowed for better integration of new research, however underlying conceptual and economic assumptions remain the same as those detailed in the 2015 deign report. The 2020 SOT also considers the potential for federal carbon tax credits from CO 2 capture in the acid-gas removal step and the impact on the final minimum fuel selling price.

09 BIOMASS FUELS↗
DOE OSTI2021

Towards Validation of Advanced Accelerated Stress Testing Protocols through Failure Analysis and Materials Characterization

As the lifetime of photovoltaic modules increases toward the goal of 50 years, accelerated stress testing is critical to assessing the viability of newer, improved, and often cheaper materials in the field. However, the validation of accelerated testing to reproduce field failure has remained elusive. The recent developments of more advanced stress testing protocols utilizing sequential and combined stressors have provided another opportunity for validation. Using a suite of mechanical, chemical, and structural characterization methods we report the development of our approach using a known bad backsheet “AAA.” We then apply this approach to PVDF-based backsheets to further confirm the generalizability of this approach. The outcome of this work is two-fold: (1) validation of advanced accelerated testing protocols which will enable the prediction of field failures in new materials, and (2) deeper insights into the degradation mechanisms observed through the extensive characterization allowing for improved materials engineering and development.

accelerated aging↗
DOE OSTI2021

Scattering by whistler-mode waves during a quiet period perturbed by substorm activity

We study the dynamics of radiation belt electrons during a 10-day quiet period perturbed by substorm activity and preceding a high-speed stream (HSS), aiming at a global description of the radiation belts in L-shell, L in [2, 6], and energy [0.1, 10] MeV. We combine Van Allen Probes observations and Fokker-Planck numerical simulations of pitch-angle diffusion. The Fokker-Planck model uses event-driven pitch angle diffusion coefficients from whistler-mode waves, built from the wave properties and the ambient plasma density measurements from the Van Allen Probes. We first find this event has some similar characteristics to regular quiet times previously studied; a widely extended plasmasphere within which we observe strong and varying whistler-mode waves. These ambient conditions lead to strong pitch-angle scattering, which contributes to the creation of a wide slot region as well as a significant decay of the outer radiation belts, which are observed and qualitatively well simulated. In addition, we find the substorm activity causes short duration (within ± 4h) decay of the plasma density and a lowering amplitude of the whistler-mode waves within the plasmasphere, both causing opposite effects in terms of pitch angle diffusion. This leads to a diminution of pitch-angle diffusion at the time of the main substorm activity. Conversely, whistler-mode waves become enhanced in the time periods between the substorm injections. All effects cumulated, we find an enhancement of pitch angle diffusion by whistler-mode waves above L~4.7 during the 10-day period. This directly relates to the combination of quietness and substorm activity which allows pitch angle diffusing of up to 1 MeV electrons in the outer belt. Relativistic electrons of 1–2 MeV remain trapped in the outer belt, from L~4.7 to L~5.2, forming, in both the observations and the simulations, a distinct pocket of remnant electrons.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

Isomeric states in the neutron-rich 𝑁 = 108 nuclei 178 Yb and 179 Lu

A multinucleon transfer reaction with a 136 Xe beam and a gold-backed 176 Yb target populated isomers in N = 108 178 Yb and 179 Lu. The single decay from the t 1/2 = 203(16) ns isomer in 178 Yb to the I π = 4 + level in the ground-state band suggests a I π = 4 − assignment, and multiquasiparticle calculations associate this state with the K π = 4 − , ν 2 (1/2[510], 9/2[624]) configuration. At least two isomers were observed in 179 Lu. One likely couples the K π = 4 − configuration found in 178 Yb to the 9/2[514] quasiproton orbital to form a K π = 17/2 + level (t 1/2 = 1.0(4) µs) which primarily decays into the rotational band based on the 9/2[514] state. A second isomer was observed to decay into this same band, but at higher energy and spin. Based on its feeding pattern, its similarity to an isomer found in 181 Ta, and a multiquasiparticle calculation, it is proposed to correspond to a K π = 29/2 − state based on the π9/2[514]ν 2 (9/2[624], 11/2[615]) configuration. As a result, an analysis of the reduced hindrance factors for negative-parity, two-quasineutron isomers in the rare-earth region is presented as well.

150 ≤ A ≤ 189↗
DOE OSTI2022

High-Octane Gasoline from Lignocellulosic Biomass via Syngas and Methanol/Dimethyl Ether Intermediates (2021 State of Technology)

The 2021 state of technology (SOT) assessment for the indirect liquefaction (IDL) of lignocellulosic biomass to high-octane gasoline (HOG) via methanol and dimethyl ether (DME) intermediates details the techno-economic analysis (TEA) results and technical progress of the pathway since the 2020 SOT report. A detailed process description and collection of underlying assumptions is given the 2015 design report. In 2021, research efforts rigorously quantified the selectivity of DME to aromatic compounds. As a result, the overall carbon selectivity to hydrocarbon products was updated based upon new findings. Additionally, research conducted over the past few years resulted in successful lower temperature regeneration of NREL's Cu/BEA catalyst with favorable implications on catalyst longevity. Discussions with an engineering firm resulted in an update to the excess air requirement for process combustors (including the char combustor, tar reformer combustor, and catalyst regenerator) in which excess air was reduced from 20% excess to 10%. The cumulative effect of the above efforts was used to calculate a minimum fuel selling price for the modeled pathway. Sensitivity cases examining federal carbon tax credits from CO 2 capture, product selectivity and yield, catalyst lifetime, and other key financial and process parameters were also considered in this assessment.

09 BIOMASS FUELS↗
DOE OSTI2024

Nuclear structure of 157 Sm via β – decay of 157 Pm

Excited states of the neutron-rich nucleus 157 Sm were populated through the β – decay of 157 Pm, which has a tentatively assigned ground-state spin and parity of J π = (5/2 – ). Over 30 levels have been observed, 16 of which are new, and over 45 new γ-ray transitions have been placed in the level scheme. An evolution in the ground-state configurations for N = 95 nuclei from 5/2 – [523] (Er/Yb), to 5/2 + [642] (Dy), to 3/2 – [521] (Sm/Gd) can be explained based on increasing deformation from Z = 70 to Z = 62 and the fact that these three orbitals are energetically close to each other at deformations near β 2 ≈ 0.25 – 0.3. Tentative spin and parity assignments are made for most of the states below 1500 keV based on the decay properties of the levels and using excitation-energy systematics of the various orbitals observed in N = 95 nuclei.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Calibration and characterization of the line-VISAR diagnostic at the HED-HIBEF instrument at the European XFEL

In dynamic-compression experiments, the line-imaging Velocity Interferometer System for Any Reflector (VISAR) is a well-established diagnostic used to probe the velocity history, including wave profiles derived from dynamically compressed interfaces and wavefronts, depending on material optical properties. Knowledge of the velocity history allows for the determination of the pressure achieved during compression. Such a VISAR analysis is often based on Fourier transform techniques and assumes that the recorded interferograms are free from image distortions. In this paper, we describe the VISAR diagnostic installed at the HED-HIBEF instrument located at the European XFEL along with its calibration and characterization. It comprises a two-color (532, 1064 nm), three-arm (with three velocity sensitivities) line imaging system. We provide a procedure to correct VISAR images for geometric distortions and evaluate the performance of the system using Fourier analysis. We finally discuss the spatial and temporal calibrations of the diagnostic. As an example, we compare the pressure extracted from the VISAR analysis of shock-compressed polyimide and silicon.

47 OTHER INSTRUMENTATION↗
DOE OSTI2024

Nuclear structure of 157 Sm via 𝛽−decay of 157 Pm

Excited states of the neutron-rich nucleus 157 Sm were populated through the 𝛽−decay of 157 Pm , which has a tentatively assigned ground-state spin and parity of 𝐽 𝜋 =(5/2 − ). Over 30 levels have been observed, 16 of which are new, and over 45 new 𝛾-ray transitions have been placed in the level scheme. An evolution in the ground-state configurations for 𝑁 = 95 nuclei from 5/2 − ⁢[523] (Er/Yb), to 5/2 + ⁢[642] (Dy), to 3/2 − ⁢[521] (Sm/Gd) can be explained based on increasing deformation from 𝑍 = 70 to 𝑍 = 62 and the fact that these three orbitals are energetically close to each other at deformations near 𝛽 2 ≈ 0.25–0.3. Finally, tentative spin and parity assignments are made for most of the states below 1500 keV based on the decay properties of the levels and using excitation-energy systematics of the various orbitals observed in 𝑁 = 95 nuclei.

beta decay↗
DOE OSTI2023

Supply Chain Sustainability Analysis of Renewable Hydrocarbon Fuels via Hydrothermal Liquefaction, Combined Algal Processing, and Biochemical Conversion: Update of the 2022 State-of-Technology Cases

The Department of Energy's (DOE) Bioenergy Technologies Office (BETO) aims to develop and deploy technologies to transform renewable biomass resources into commercially viable, high-performance biofuels, bioproducts, and biopower through public and private partnerships. BETO and its national laboratory teams conduct in-depth techno-economic assessments (TEA) of biomass feedstock supply and logistics and conversion technologies to produce biofuels. There are two general types of TEAs: A design case outlines a target case (future projection) for a particular biofuel pathway. It informs R&D priorities by identifying areas in need of improvement, tracks sustainability impact of R&D, and provides goals and benchmarks against which technology progress is assessed. A state of technology (SOT) analysis assesses progress within and across relevant technology areas based on actual results at current experimental scales relative to technical targets and cost goals from design cases, and includes technical, economic, and environmental criteria as available. In addition to developing a TEA for a pathway of interest, BETO also performs a supply chain sustainability analysis (SCSA). The SCSA takes the life-cycle analysis approach that BETO has been supporting for over 20 years. It enables BETO to identify energy consumption, environmental, and sustainability issues that may be associated with biofuel production. Approaches to mitigating these issues can then be developed. Additionally, the SCSA allows for comparison of energy and environmental impacts across biofuel pathways in BETO's research and development portfolio. This technical report describes the SCSAs for the production of renewable hydrocarbon transportation fuels via a range of conversion technologies in the 2022 SOTs: (1) renewable hydrocarbon fuels via hydrothermal liquefaction (HTL) of wet sludge from a wastewater treatment plant; (2) renewable hydrocarbon fuels via biochemical conversion of herbaceous lignocellulosic biomass; (3) renewable hydrocarbon fuels via HTL of an algae/woody biomass blend; and (4) renewable hydrocarbon fuels via combined algae processing (CAP).

09 BIOMASS FUELS↗