Search NASA⌕ Search

SEARCH · Search NASA

Results for “High NA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS1991

Further high-resolution Na I observations of the local interstellar medium

High-resolution absorption measurements of the interstellar Na I D lines at 5890 A observed toward 27 early-type stars in the local interstellar medium (LISM) are presented. These results are combined with other high-resolution sodium measurements to map the space distribution of neutral sodium column density for some 118 stars out to less than 200 pc. These measurements indicate an upper limit to the neutral sodium column density of log N(Na I) less than 10.0/sq cm can be inferred out to a distance of 50 pc in most directions in the LISM. Also, the rarefield region of the Local Bubble may extend beyond 60 pc in at least 35 percent of the directions sampled thus far. Evidence is shown for a ubiquitous, comoving vector for neutral NaI gas clouds in the LISM which is in a different direction to LISM vectors previously reported for more ionized local gas clouds. A comparison of the measured sodium columns with those of interstellar Ca II for a sample of 12 stars within 95 pc results in a ratio of Na I/Ca II less than 0.5 for most stars. This value implies that there could be warm, neutral gas with T of about 12,500 K beyond 50 pc in the LISM.

Welsh, B. Y.↗
NASA NTRS1975

Edge-defined film-fed growth of beta-alumina and Mg-substituted beta-alumina

High Na vapor pressure, peritectic decomposition, and high reactivity of the melt complicate the growth of beta-alumina crystals. These difficulties were overcome by using a high-pressure (300 psig) growth chamber, Na2O-rich melts, and Ir for all surfaces in contact with the melt. These procedures were combined with the edge-defined film-fed growth technique to produce single-crystal beta-alumina tubes and ribbons.

Morrison, A. D.↗
NASA NTRS1996

Collection of Light From an Optical Fiber With a Numerical Aperture Greater Than One

In an optical fiber having NA greater than 1, light may be internally reflected when it strikes the fiber end at a fiber-air interface. This problem may be overcome by modification of the fiber by reverse tapering the core. Light is redirected by the taper to strike the interface at an angle closer to normal. This allows light to exit the fiber end that would by internally reflected in an untapered fiber of NA greater than 1. The novelty of the present invention lies in the tapering of the fiber core for increased through transmission of light. Prior art devices have made use of fiber tapers to achieve mode control or fiber coupling. The problem of internal reflection has not been addressed as it is one that is not as important in fibers having NA less than 1, which are more common. In chemical sensing it is advantageous to make use of fibers having higher NA due to an increased sensitivity. However the advantages in sensitivity are diminished due to the loss of signal at the fiber-air interface. The present invention overcomes the problem of loss at the interface, thus facilitating the use of high NA fibers for chemical sensing.

Egalon, Claudio O.↗
NASA NTRS1977

Io's surface composition based on reflectance spectra of sulfur/salt mixtures and proton-irradiation experiments

Available full-disk reflectance spectra of Io in the range 0.3 to 2.5 microns have been used to determine a surface compositional model for Io that is consistent with Io's other known chemical and physical properties. Results indicate that the surface of Io contains abundant dehydrated salts of high Na, Mg, and Fe(3+) content such as bloedite and ferrous iron sulfate. Experiments were performed studying the irradiation damage effects from low-energy proton bombardment, since Io is immersed in Jupiter's magnetosphere.

Nash, D. B.↗
NASA NTRS1989

Double-peaked sodium layers at high latitudes

Na lidar observations indicate that at high latitudes in summer the neutral Na layer frequently attains a double-peaked structure. The main layer with a maximum near 90 km altitude is supplemented by a secondary, narrow layer near 95 km altitude. Results are presented concerning secondary sodium layers. It appears likely that the formation of secondary Na layers observed frequently above the lidar site is not solely a 'sodium phenomenon', but part of a more comprehensive layering process for metal atoms and ions. Na(+)/Na density ratios close to 0.5 near the peaks of both the main and secondary layers are derived.

Von Zahn, U.↗
NASA NTRS1994

A high-resolution survey of interstellar Na I D1 lines

We present high-resolution (0.5 km/s) spectra, obtained with the McDonald Observatory 2.7 m coude echelle spectrograph, of interstellar Na I D1 absorption toward 38 bright stars. Numerous narrow, closely blended absorption components, showing resolved Na I hyperfine structure, are evident in these spectra; such narrow components appear in both low halo and quite local gas, as well as in gas toward more distant disk stars. We have used the method of profile fitting in an attempt to determine column densities, line widths, and velocities for the individual interstellar clouds contributing to the observed absorption lines. The resulting sample of 276 clouds is significantly larger, and likely more complete, than several previous samples of 'individual' interstellar clouds, and allows more precise investigation of various statistical properties. We find that the cloud column density (N) and line width parameter (b) are not correlated, for 0.3 km/s approximately less than b approximately less than 1.5 km/s and 10.0/sq cm approximately less than log (N(Na I)) approximately less than 11.6/sq cm. The median b is about 0.73 km/s, the median log N is about 11.09/sq cm, and the median separation between adjacent components is about 2.0 km/s. All these are overestimates of the true median values, however, due to our inability to completely resolve all the component structure present in some cases; even at a resolution of 0.5 km/s, we may have discerned only 60% of the full number of individual components actually present. The one-dimensional dispersion of component velocities, in the local standard of rest, is approximately 8.6 km/s; the distribution of velocities is broader and displaced to more negative velocities for the weaker components. If 80 K is a representative temperature for the interstellar clouds seen in Na I absorption, then at least 38% (and probably the majority) of the clouds have subsonic internal turbulent motions. The range in N(H I) observed at a given N(Na I) increases as N(Na I) decreases below about 10(exp 11)/sq cm, so that N(Na I) becomes a less reliable predictor of N(H I) at low column densities. These spectra will be quite useful in future detailed studies of these lines of sight with the Hubble Space Telescope (HST) Goddard High Resolution Spectrograph (GHRS) echelle -- to determine accurate velocities and to reveal the detailed interstellar component structures that cannot be discerned at the 3.5 km/s resolution available with the GHRS.

Welty, Daniel E.↗
NASA NTRS1992

NMR studies on Na+ transport in Synechococcus PCC 6311

The freshwater cyanobacterium Synechococcus PCC 6311 is able to adapt to grow after sudden exposure to salt (NaCl) stress. We have investigated the mechanism of Na+ transport in these cells during adaptation to high salinity. Na+ influx under dark aerobic conditions occurred independently of delta pH or delta psi across the cytoplasmic membrane, ATPase activity, and respiratory electron transport. These findings are consistent with the existence of Na+/monovalent anion cotransport or simultaneous Na+/H+ +anion/OH- exchange. Na+ influx was dependent on Cl-, Br-, NO3-, or NO2-. No Na+ uptake occurred after addition of NaI, NaHCO3, or Na2SO4. Na+ extrusion was absolutely dependent on delta pH and on an ATPase activity and/or on respiratory electron transport. This indicates that Na+ extrusion via Na+/H+ exchange is driven by primary H+ pumps in the cytoplasmic membrane. Cells grown for 4 days in 0.5 m NaCl medium, "salt-grown cells," differ from control cells by a lower maximum velocity of Na+ influx and by lower steady-state ratios of [Na+]in/[Na+]out. These results indicate that cells grown in high-salt medium increase their capacity to extrude Na+. During salt adaptation Na+ extrusion driven by respiratory electron transport increased from about 15 to 50%.

Non-NASA Center↗
NASA NTRS1975

Auger electron spectroscopy at high spatial resolution and nA primary beam currents

An experimental Auger microprobe system is described which incorporates a field-emission electron gun and total beam currents in the nanoampere range. The distinguishing characteristics of this system include a large multistation UHV specimen chamber, pulse counting and fully digital Auger signal-processing techniques, and digital referencing methods to eliminate the effects of beam instabilities. Some preliminary results obtained with this system are described, and it is concluded that field-emission electron sources can be used for high-resolution Auger electron spectroscopy with primary-beam spots of less than 100 nm and beam currents of the order of 1 nA.

Todd, G.↗
NASA NTRS2001

Effects of noradrenaline on human vagal baroreflexes

BACKGROUND: Baroreflex sensitivity (BRS) is depressed in conditions associated with high sympathetic nerve activity in proportion to circulating noradrenaline (NA) levels. Despite the prognostic importance of measurements of BRS in patients, there is little information on how high NA levels affect arterial baroreflex function. AIM: To understand better the role of NA in cardiovascular homeostasis. METHODS: We gave incremental intravenous NA infusions (at 50 and 100 ng/kg/min) to 12 healthy young men. We measured RR intervals and photoplethysmographic arterial pressures and estimated BRS with cross-spectral and sequence methods during metronome-guided respiration at 0.25 Hz. RESULTS: The high NA infusion rate significantly increased respiratory-frequency (0.15-0.40 Hz) RR interval spectral power and decreased low-frequency (0.04-0.15 Hz) systolic pressure spectral power compared with baseline levels (P < 0.05 for both). Cross-spectral BRS increased from an average (+/- SD) baseline level of 17.3+/-6.6 to 34.1+/-20.8 ms/mmHg at the high NA infusion rate (P < 0.05). Sequence BRS values did not increase significantly during NA infusions. The percentage of sequences with parallel changes in systolic pressures and RR intervals decreased progressively from a baseline level of 16.0+/-12.9 to 10.1+/-7.4 during the low NA infusion rate and to 6.2+/-6.2% during the high rate (P < 0.05 and 0.01, respectively). CONCLUSIONS: Increases in circulating NA to high physiological levels do not depress BRS but interfere with the close baroreflex-mediated coupling that is usually present between arterial pressure and heart rate.

Non-NASA Center↗
NASA NTRS1990

Geochemistry and genesis of the angrites

The major and trace elements were analyzed in samples of LEW86010, LEW87051, and Angra dos Reis angrites were analyzed using INAA and fused-bead EMP techniques. Results suggest that all three angrites originated on a volatile-depleted (Na-poor) but oxidized parent body or on several bodies. The combination of low Na and high FeO/MnO found in these samples suggests that the extreme Na depletion was caused by parent-body outgassing during differentiation, rather than by nebular processes. It was also found that the refractory-element abundances observed in LEW86010 and LEW87051 are related via olivine control; it is suggested that LEW86010 may be a residual melt from a LEW87051-like precursor or that LEW87051 formed from a LEW86010-like precursor via olivine accumulation. On the other hand, the Angra dos Reis displayed an unusual refractory element pattern suggesting that either the angrite parent body was heterogeneous or that Angra dos Reis was formed on a parent body different from that of the other two angrites.

Mittlefehldt, David W.↗
NASA NTRS1994

Optical studies of interstellar material in low density regions of the Galaxy

We analyze high-resolution Na I and Ca II interstellar absorption line data obtained in an earlier spectroscopic survey of 57 stars along extended sight lines through the Galactic disk and halo. We find that the Na I lines trace a diffuse cloudy medium and the CA II lines trace both the cloudy medium and a more extended (intercloud) medium. High latitude and interarm sight lines that do not cross spiral arms have clouds that are more diffuse on average than those along sight lines that cross spiral arms. Spiral structure may play an important role in determinating the average absorption properties along extended sight lines and/or interesting physical differences may exist between sight lines that cross spiral arms and those that do not. These might include a harder radiation field and/or higher electron tempertures along the high latitude and 'clean' interarm sight lines. On average, 10% of the Ca II column density occurs at velocities forbidden by the Galactic rotation law by more than 10 km/s. In contrast, only a small precentage of the Na I column density occurs at these velocites. The Ca II to Na I ratio increases by a factor of 15 over forbidden velocities from 0 to 50 km/s and rises rapidly thereafter. A two component model of the Ca II column density per unit velocity over the range l = 325 deg to 360 deg indicates that two distinct distributions exists, one with sigma = 8 km/s and one with sigma = 21 km/s. As much as 60% of the Ca II column density at forbidden velocities may be associated with the faster distribution, which we attribute to warm intercloud material. We estimate expontential scale heights of 0.4-0.5 kpc for the neutral gas traced by the E(B-V), Na I, and H I distributions along the low density sight lines, and we find that Ca II has a larger scale height of 0.8 kpc.

Sembach, K. R.↗
NASA NTRS2008

Carbon Nanotube Vacuum Gauges Utilizing Long, Dissipative Tubes

CNT Vacuum Gauges: a) have a broad range of pressure response from 760 - 10(exp -6) Torr. b) have current changes approx. 100's nA in high vacuum regime (10(exp -6) Torr) and sensitivity increases with power and substrate removal. c) have a negative dR/dT (TCR negative) where a thermal hopping energy E(sub a) was determined to be approx. 40 meV. d) have compatible fabrication requirements for their integration with micromachined structures. e) can be operated at low power (nW - micro-W). f) have an active device region footprint of < 10 sq microns. g) are non-intrusive due to small size and passive operation.

nanotube sensors↗
NASA NTRS2016

Fluids During Diagenesis and Sulfate Vein Formation in Sediments at Gale Crater, Mars

We model the fluids involved in the alteration processes recorded in the Sheep bed Member mudstones of Yellowknife Bay (YKB), Gale crater, Mars, as revealed by the Mars Science Laboratory Curiosity rover investigations. We compare the Gale crater waters with fluids modeled for shergottites, nakhlites, and the ancient meteorite ALH 84001, as well as rocks analyzed by the Mars Exploration rovers, and with terrestrial ground and surface waters. The aqueous solution present during sediment alteration associated with phyllosilicate formation at Gale was high in Na, K, and Si; had low Mg, Fe, and Al concentrations relative to terrestrial ground waters such as the Deccan Traps and other modeled Mars fluids; and had near neutral to alkaline pH. Ca and S species were present in the 10(exp -3) to 10(exp -2) concentration range. A fluid local to Gale crater strata produced the alteration products observed by Curiosity and subsequent evaporation of this ground water- type fluid formed impure sulfate- and silica-rich deposits veins or horizons. In a second, separate stage of alteration, partial dissolution of this sulfate-rich layer in Yellowknife Bay,or beyond, led to the pure sulfate veins observed in YKB. This scenario is analogous to similar processes identified at a terrestrial site in Triassic sediments with gypsum veins of the Mercia Mudstone Group in Watchet Bay, UK.

Gale Crater↗
NASA NTRS1993

Component Selection, Accelerated Testing, and Improved Modeling of AMTEC Systems for Space Power

Alkali metal thermal to electric converter (AMTEC) designs for space power are numerous, but the selection of materials for construction of long-lived AMTEC devices has been limited to electrodes, current collectors, and the solid electrolyte. AMTEC devices with lifetimes greater than 5 years require careful selection and life testing of all hot-side components. The likely selection of a remote condensed design for initial flight test and probable use with a radioisotope heat source in AMTEC powered planet probes requires the device to be constructed to tolerate operating T greater than 1150K, as well as exposure to Na (g) , and Na (liq) on the high pressure side. The temperatures involved make the characterization of high strength and chemical resistance to Na containing Na 2 O critical. Selection among materials which can be worked should not be driven by ease of fabricablity, as high temperature stability is the critical issue. These concepts drive the selecton of Mo alloys for Na (liq) containment in AMTEC cells for T to 1150K operation, as they are significantly stronger than comparable Nb or Ta alloys, are less soluble in Na (liq) containing dissolved Na 2 O, are workable compared with W alloys (which might be used for certain components), and are ductile at the T greater than 500K of proposed AMTEC modules in space applications.

AMTEC↗