Search NASA⌕ Search

SEARCH · Search NASA

Results for “High-density liquid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Computational investigation of water glasses using machine-learning potentials

The molecular origins of water’s anomalous properties have long been a subject of scientific inquiry. The liquid–liquid phase transition hypothesis, which posits the existence of distinct low-density and high-density liquid states separated by a first-order phase transition terminating at a critical point, has gained increasing experimental and computational support and offers a thermodynamically consistent framework for many of water’s anomalies. However, experimental challenges in avoiding crystallization near the postulated liquid–liquid critical point have focused attention to water’s canonical glassy states: low-density and high-density amorphous ice. Here, we use two Deep Potential machine-learning models, trained on the Strongly Constrained and Appropriately Normed density functional and the highly accurate Many-Body Polarizable potential, to conduct an investigation of water’s glassy phenomenology based on quantum mechanical calculations. Despite not being explicitly trained on amorphous ices, both models accurately capture the structure and transformation of the water glasses, including their interconversion along different thermodynamic paths. Isobaric quenching of liquid water at various pressures generates a continuum of intermediate amorphous ices and density fluctuations increase near the liquid–liquid critical pressure. The glass transition temperatures of the amorphous ices produced at different pressures exhibit two distinct branches, corresponding to low-density and high-density amorphous ice behaviors, consistent with experiment and the liquid–liquid transition hypothesis. Extrapolating transformation pressures from isothermal compressions to experimental compression rates brings our simulations into excellent agreement with data. Our findings demonstrate that machine-learning potentials trained on equilibrium phases can effectively model nonequilibrium glassy behavior and pave the way for studying long-timescale, out-of-equilibrium processes with quantum mechanical accuracy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1974

Conduction in fully ionized liquid metals

Electron transport is considered in high-density fully ionized liquid metals. Ionic structure is described in terms of hard-sphere-correlation functions and the scattering is determined from self-consistently screened point ions. Applications to the physical properties of the deep interior of Jupiter are briefly considered.

Stevenson, D. J.↗
NASA NTRS2025

High-density Boron Nitride Nanotube Composites via Surfactant-stabilized Lyotropic Liquid Crystals for Enhanced Space Radiation Shielding

Despite significant technological advancements in space exploration, human space travel and colonization remain limited by the health risks associated with space radiation. Boron nitride nanotubes (BNNTs) have been proposed as an advanced material for space applications due to their high specific strength and efficient radiation shielding capabilities. However, the practical implementation of BNNTs has been slow, primarily due to technological challenges in fabricating structural materials incorporating BNNTs. In this study, a method is presented for fabricating high-density BNNT films that are mechanically robust, exhibit high thermal conductivity, and effectively attenuate space radiation. The key advancement enabling high-density BNNT films is the successful preparation of BNNT liquid crystals (LCs), achieved through the strategic use of a commercial dodecylbenzenesulfonic acid surfactant. This surfactant ensures exceptional BNNT stability in aqueous dispersion, even at concentrations exceeding the LC phase transition threshold. Simulations, estimating the equivalent radiation dose to the human body in space, indicate that a high-density BNNT film with a surface density of 50 g cm−2 reduces the total dose equivalent rate by 56% compared to zero shielding. This enhancement would allow astronauts to extend their mission duration on the lunar surface by a factor of two.

Young-Kyeong Kim↗
NASA NTRS1990

Shock induced polymorphic transition in quartz, carbon, and boron nitride

The model proposed by Ahrens (1988) to explain the mechanism of the polymorphism in silicates is revised, and the revised model is applied to the quartz/stishovite, graphite/diamond, and graphite-boron nitride (g-BN) phase transformations. In this model, a key assumption is that transformation to a high-density amorphous or possibly liquid phase which rapidly crystallized to the high-pressure phase is triggered by the high temperatures in the shear band and upon crossing the metastable extension of a melting curve. Good agreement between the calcualted results and published data is obtained. The present theory predicts the standard entropy for cubic BN to be 0.4-0.5 J/g K.

Tan, Hua↗
DOE OSTI2025

Molecular Design Considerations for Azobenzene Anolytes

Realization of high-density batteries requires the development of anolytes that display highly negative reduction potentials, solubility, and persistence in the charged state. Azobenzenes have garnered interest as potential anolytes for redox flow batteries. Here, we report the synthesis of a family of substituted azobenzene derivatives and evaluation of their solution-phase electrochemical properties. Systematic synthetic derivatization of this scaffold allows (1) access to anolytes of varying solubility, including intrinsically liquid derivatives that represent potential high-density charge carriers; (2) systematic variation of the reduction potential, and in some cases redox inventory, that provides azobenzenes with highly negative reduction potentials; and (3) control of the lifetime of the azobenzene radical anions that result from one-electron reduction. Electrokinetic experiments demonstrated that fast electron transfer occurs for all derivatives examined. Spectroscopic characterization of monoreduced azobenzene derivatives establishes that decomposition of the azobenzene radical anion proceeds via bimolecular disproportionation. Together, these results provide an experimental basis for the optimization of azobenzene anolytes for electrochemical storage applications, including redox flow batteries.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

LC-Opt: Benchmarking Reinforcement Learning and Agentic AI for End-to-End Liquid Cooling Optimization in Data Centers

Liquid cooling is critical for thermal management in high-density data centers with the rising AI workloads. However, machine learning-based controllers are essential to unlock greater energy efficiency and reliability, promoting sustainability. We present LC-Opt, a Sustainable Liquid Cooling (LC) benchmark environment, for reinforcement learning (RL) control strategies in energy-efficient liquid cooling of high-performance computing (HPC) systems. Built on the baseline of a high-fidelity digital twin of Oak Ridge National Lab's Frontier Supercomputer cooling system, LC-Opt provides detailed Modelica-based end-to-end models spanning site-level cooling towers to data center cabinets and server blade groups. RL agents optimize critical thermal controls like liquid supply temperature, flow rate, and granular valve actuation at the IT cabinet level, as well as cooling tower (CT) setpoints through a Gymnasium interface, with dynamic changes in workloads. This environment creates a multi-objective real-time optimization challenge balancing local thermal regulation and global energy efficiency, and also supports additional components like a heat recovery unit (HRU). We benchmark centralized and decentralized multi-agent RL approaches, demonstrate policy distillation into decision and regression trees for interpretable control, and explore LLM-based methods that explain control actions in natural language through an agentic mesh architecture designed to foster user trust and simplify system management. LC-Opt democratizes access to detailed, customizable liquid cooling models, enabling the ML community, operators, and vendors to develop sustainable data center liquid cooling control solutions.

Naug, Avisek [Hewlett Packard Enterprise]↗
NASA NTRS1980

Simulation studies of a model of high-density metallic hydrogen

Upper bounds for the ground-state energies of liquid and solid phases of metallic hydrogen and metallic deuterium have been calculated with variational methods and Monte Carlo techniques. At four densities (0.8, 1.2, 1.36, and 1.488) crystalline phases are clearly preferred in the sense that the energy difference, when compared to the liquid, is in excess of the errors inherent in the numerical procedures. At a fifth density (1.6), the energy differences between solid and liquid phases are smaller than these errors.

Mon, K. K.↗
DOE OSTI2026

Seasonal Precipitation Classification during Surface Atmosphere Integrated Field Laboratory Campaign

The Surface Atmosphere Integrated Field Laboratory (SAIL) campaign, conducted from September 2021 to June 2023 in Crested Butte, Colorado, aimed to characterize precipitation processes in the Upper Colorado River Basin (UCRB). This increased observations of snowfall accumulation in this hydrologically significant watershed would be useful for quantitative precipitation estimates (QPE). Therefore, the Surface Quantitative Precipitation Estimate (SQUIRE) product was developed using the ARM-supported Colorado State University (CSU) X-band Precipitation Radar. Although SQUIRE will be only released for snowfall, by categorizing precipitation types, users can effectively utilize relevant datasets under diverse meteorological conditions. Moreover, the dataset facilitates validation of the QPE product and the analysis of seasonal variations in precipitation types at the surface. Hydrometeors classes are organized based on their phase and physical characteristics mapping the CSU (both winter Summer) and Py-ART classifications into four groups. 1. Liquid Precipitation: includs drizzle, rain, and large raindrops. 2. Frozen Snow and Ice : Pure Snow, combining ice crystals, aggregates, and vertically oriented ice structures. 3. Dense and Large frozen hydrometeors: including low- and high-density graupel and dry hail. 4.Melting: Wet Snow and Melting Hail, hydrometeors exhibiting both liquid and frozen characteristics.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1992

Comparison of immersed liquid and air cooling of NASA's Airborne Information Management System

The Airborne Information Management System (AIMS) is currently under development at NASA Dryden Flight Research Facility. The AIMS is designed as a modular system utilizing surface mounted integrated circuits in a high-density configuration. To maintain the temperature of the integrated circuits within manufacturer's specifications, the modules are to be filled with Fluorinert FC-72. Unlike ground based liquid cooled computers, the extreme range of the ambient pressures experienced by the AIMS requires the FC-72 be contained in a closed system. This forces the latent heat absorbed during the boiling to be released during the condensation that must take within the closed module system. Natural convection and/or pumping carries the heat to the outer surface of the AIMS module where the heat transfers to the ambient air. This paper will present an evaluation of the relative effectiveness of immersed liquid cooling and air cooling of the Airborne Information Management System.

Hoadley, A. W.↗
NASA NTRS1995

Ablative material testing for low-pressure, low-cost rocket engines

The results of an experimental evaluation of ablative materials suitable for the production of light weight, low cost rocket engine combustion chambers and nozzles are presented. Ten individual specimens of four different compositions of silica cloth-reinforced phenolic resin materials were evaluated for comparative erosion in a subscale rocket engine combustion chamber. Gaseous hydrogen and gaseous oxygen were used as propellants, operating at a nominal chamber pressure of 1138 kPa (165 psi) and a nominal mixture ratio (O/F) of 3.3. These conditions were used to thermally simulate operation with RP-1 and liquid oxygen, and achieved a specimen throat gas temperature of approximately 2456 K (4420 R). Two high-density composition materials exhibited high erosion resistance, while two low-density compositions exhibited approximately 6-75 times lower average erosion resistance. The results compare favorably with previous testing by NASA and provide adequate data for selection of ablatives for low pressure, low cost rocket engines.

Richter, G. Paul↗
DOE OSTI2025

Dynamic compression effects of H 2 ⁡O in a dynamic diamond anvil cell: Origin of metastable ice VII and its crystal growth kinetics

We report on the structural verification of metastable ice VII solidifying in the phase space of ice VI at 1.80 GPa at room temperature. Using time-resolved (TR) x-ray diffraction and TR ruby luminescence paired with high-speed microphotography utilizing a dynamic diamond anvil cell, an initial compression rate range from 0.12 to 95.84 GPa/s was explored. The solidification pressure of metastable ice VII has a potential sigmoidal dependence upon compression rate with a turnover compression rate of ∼80 GPa/s. The preferred crystallization of ice VII in the stability field of ice VI is due to the increased nucleation rate of ice VII over ice VI at 1.77 GPa that is driven by the surface energy difference between the liquid and solid phases along with the change in Gibbs free energy of solidification. The dynamic pressure-volume–compression behaviors of ice phases (VI and VII) show a lattice stiffening in both phases, especially during the compression loading. It is also found that the compression rate greatly affects the solid-solid phase transition between ice VI and VII but does not affect the liquid-solid transition between water and ice VI as much. Lastly, a third phase transition was found to occur after metastable ice VII transforms into high-density amorphous (HDA) ice, which could be a disordered hydrogen-bonded network configuration of ice VII forming out of HDA ice facilitated by the decoupling of the oxygen movement and reorientation of the H 2⁡ O molecule. These results demonstrate the complexity of a seemingly simple molecule H 2⁡ O, how it can readily change its static properties with the modification of (de)compression rate, and highlight the need to use multiple TR structural and spectroscopic probes at higher time resolutions to realize the most comprehensive understanding.

Chemical bonding↗
DOE OSTI2025

High Energy Density Physics of Inertial Confinement Fusion Ablator Materials (Final Technical Report)

The goal of this project was to conduct dynamic compression experiments and predictive simulations to reveal the fundamental high-energy-density (HED) physics of amorphous carbon. These results are essential for assessing amorphous carbon as a potential ablator material for next generation of inertial confinement fusion (ICF) capsules. We made significant progress in exploring the HED properties of amorphous carbon through experiments at Omega EP Laser and the European XFEL, in addition to billion-atom, quantum-accurate molecular dynamics (MD) simulations. Through our joint experimental and simulation program, we mapped the phase diagram of amorphous carbon, uncovering its range of metastability and identifying phase transitions to diamond and liquid carbon along the Hugoniot and at higher pressures using double shock compression pathways. Our findings indicate that amorphous carbon melts at significantly lower shock pressures than high-density carbon (diamond). However, nanocrystalline diamond nucleates across a broad range of pressures and temperatures. This emergence of the nanocrystalline microstructure during compression can negatively impact the planarity of the shock front and potentially trigger ablator/fuel mixing during Inertial Fusion Energy (IFE) applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS1976

Quantum principles and free particles

The quantum principles that establish the energy levels and degeneracies needed to evaluate the partition functions are explored. The uncertainty principle is associated with the dual wave-particle nature of the model used to describe quantized gas particles. The Schroedinger wave equation is presented as a generalization of Maxwell's wave equation; the former applies to all particles while the Maxwell equation applies to the special case of photon particles. The size of the quantum cell in phase space and the representation of momentum as a space derivative operator follow from the uncertainty principle. A consequence of this is that steady-state problems that are space-time dependent for the classical model become only space dependent for the quantum model and are often easier to solve. The partition function is derived for quantized free particles and, at normal conditions, the result is the same as that given by the classical phase integral. The quantum corrections that occur at very low temperatures or high densities are derived. These corrections for the Einstein-Bose gas qualitatively describe the condensation effects that occur in liquid helium, but are unimportant for most practical purposes otherwise. However, the corrections for the Fermi-Dirac gas are important because they quantitatively describe the behavior of high-density conduction electron gases in metals and explain the zero point energy and low specific heat exhibited in this case.

Source record↗
DOE OSTI2024

Cyanobacteria newly isolated from marine volcanic seeps display rapid sinking and robust, high-density growth

Cyanobacteria are photosynthetic organisms that play important roles in carbon cycling and are promising bioproduction chassis. Here, we isolate two novel cyanobacteria with 4.6Mbp genomes, UTEX 3221 and UTEX 3222, from a unique marine environment with naturally elevated CO₂. We describe complete genome sequences for both isolates and, focusing on UTEX 3222 due to its planktonic growth in liquid, characterize biotechnologically relevant growth and biomass characteristics. UTEX 3222 outpaces other fast-growing model strains on a solid medium. It can double every 2.35 hours in a liquid medium and grows to high density (>31 g/L biomass dry weight) in batch culture, nearly double that of Synechococcus sp. PCC 11901, whose high-density growth was recently reported. In addition, UTEX 3222 sinks readily, settling more quickly than other fast-growing strains, suggesting favorable economics of harvesting UTEX 3222 biomass. These traits may make UTEX 3222 a compelling choice for marine carbon dioxide removal (CDR) and photosynthetic bioproduction from CO₂. Overall, we find that bio-prospecting in environments with naturally elevated CO₂ may uncover novel CO₂-metabolizing organisms with unique characteristics.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Medium-density amorphous ice unveils shear rate as a new dimension in water’s phase diagram

Recent experiments revealed a new amorphous ice phase, medium-density amorphous ice (MDA), formed by ball-milling ice I h at 77 K [Rosu-Finsen et al., Science 379, 474–478 (2023)]. MDA has density between that of low-density amorphous (LDA) and high-density amorphous (HDA) ices, adding to the complexity of water’s phase diagram, known for its glass polyamorphism and two-state thermodynamics. The nature of MDA and its relation to other amorphous ices and liquid water remain unsolved. Here, we use molecular simulations under controlled pressure and shear rate at 77 K to produce and investigate MDA. Here. we find that MDA formed at constant shear rate is a steady-state nonequilibrium shear-driven amorphous ice (SDA), that can be produced by shearing ice I h , LDA, or HDA. Our results suggest that MDA could be obtained by ball-milling water glasses without crystallization interference. Increasing the shear rate at ambient pressure produces SDAs with densities ranging from LDA to HDA, revealing shear rate as a new thermodynamic variable in the nonequilibrium phase diagram of water. Indeed, shearing provides access to amorphous states inaccessible by controlling pressure and temperature alone. SDAs produced with shearing rates as high as 10 6 s −1 sample the same region of the potential energy landscape than hyperquenched glasses with identical density, pressure, and temperature. Intriguingly, SDAs obtained by shearing at ~10 8 s −1 have density, enthalpy, and structure indistinguishable from those of water “instantaneously” quenched from room temperature to 77 K over 10 ps, making them good approximants for the “true glass” of ambient liquid water.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Pressure-driven density match nucleates metastable r8 phases from amorphous Si and Ge

The pressure–temperature phase behavior of covalent disordered solids such as amorphous silicon and germanium is complex. Questions remain on possible glass transitions, on polyamorphism via amorphous–amorphous transitions, on connections with liquid–liquid transitions, on structure-behavior relationships, and on their potential as precursor for novel methods for material discovery. Here we demonstrate experimentally the nucleation of a metastable, four-fold coordinated rhombohedral r8 phase from pure amorphous silicon and germanium upon room temperature compression at pressures below 10 GPa. Accompanying theory reveals a strong pressure-driven distortion of the bond angle transforming the starting tetrahedral low-density amorphous network to a distorted four-fold coordinated medium-density state. This state is of lower density than metallic high-density networks, resembles the crystalline r8 phase and initiates its nucleation. Our finding shows that polyamorphism is not the only possible transformation mode for these amorphous solids and that instead nucleation of interesting functional phases at potentially useful pressures is possible. Such novel access modes to metastable structures are critical for future exploitability and could be useful for other tetrahedral materials including carbon, where the related (bc8) post-diamond phase remains elusive. Our observed density match between an amorphous and a metastable crystalline phase clearly allows for a new phase transition pathway, while corresponding theory demonstrates how carefully validated atomistic simulations can guide prediction, discovery and synthesis of novel material structures.

Materials discovery↗
DOE OSTI2024

The Effects of Polyolefin Structure and Source on Pyrolysis-Derived Plastic Oil Composition

Seven types of plastics were pyrolyzed in a fluidized bed reactor: post-consumer recycled (PCR) high-density polyethylene (HDPE), PCR polypropylene (PP), virgin resins of varying molecular weights of HDPE, virgin resins of low-density polyethylene (LDPE), linear low-density polyethylene (LLDPE), and (PP). Pyrolysis produced non-condensable gases (C1-C3), liquid phase products (C4-C40), and solids (C40+ and chars), with alkane, alkene, alkadiene, aromatic, and multi-cycloaromatics as the predominant compounds. Polymer structure had the greatest impact on product distribution, with minimal influence from molecular weight. Branches in polyethylene (PE) acted as thermal defects initiating degradation. Higher branch density in PE led to increased concentrations of aromatics, branched alkanes, and internal alkenes. PP and PE exhibited distinct degradation mechanisms, with PP requiring less energy for decomposition and yielding more oil. Here, pyrolysis oil from PCR HDPE and PCR PP contained a higher proportion of branched compounds. Additives in PCR plastics may promote isomerization during pyrolysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗