SEARCH · Search NASA

Results for “Human Health”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

DOE OSTI2013

Nitrite in feed: From Animal health to human health

Nitrite is widely consumed from the diet by animals and humans. However the largest contribution to exposure results from the in vivo conversion of exogenously derived nitrate to nitrite. Because of its potential to cause to methaemoglobin (MetHb) formation at excessive levels of intake, nitrite is regulated in feed and water as an undesirable substance. Forages and contaminated water have been shown to contain high levels of nitrate and represent the largest contributor to nitrite exposure for food-producing animals. Interspecies differences in sensitivity to nitrite intoxication principally result from physiological and anatomical differences in nitrite handling. In the case of livestock both pigs and cattle are relatively susceptible. With pigs this is due to a combination of low levels of bacterial nitrite reductase and hence potential to reduce nitrite to ammonia as well as reduced capacity to detoxify MetHb back to haemoglobin (Hb) due to intrinsically low levels of MetHb reductase. In cattle the sensitivity is due to the potential for high dietary intake and high levels of rumen conversion of nitrate to nitrite, and an adaptable gut flora which at normal loadings shunts nitrite to ammonia for biosynthesis. However when this escape mechanism gets overloaded, nitrite builds up and can enter the blood stream resulting in methemoglobinemia. Looking at livestock case histories reported in the literature no-observed-effect levels of 3.3 mg/kg body weight (b.w.) per day for nitrite in pigs and cattle were estimated and related to the total daily nitrite intake that would result from complete feed at the EU maximum permissible level. This resulted in margins of safety of 9-fold and 5-fold for pigs and cattle, respectively. Recognising that the bulkiness of animal feed limits their consumption, these margins in conjunction with good agricultural practise were considered satisfactory for the protection of livestock health. A human health risk assessment was also carried out taking into account all direct and indirect sources of nitrite from the human diet, including carry-over of nitrite in animal-based products such as milk, eggs and meat products. Human exposure was then compared with the acceptable daily intake (ADI) for nitrite of 0-0.07 mg/kg b.w. per day. Overall, the low levels of nitrite in fresh animal products represented only 2.9% of the total daily dietary exposure and thus were not considered to raise concerns for human health. It is concluded that the potential health risk to animals from the consumption of feed or to man from eating fresh animal products containing nitrite, is very low.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2016

Ecosystem Services Connect Environmental Change to Human Health Outcomes

Global environmental change, driven in large part by human activities, profoundly impacts the structure and functioning of Earth’s ecosystems (Millennium Ecosystem Assessment 2005). We are beginning to push beyond planetary boundaries (Steffan et al. 2015), and the consequences for human health remain largely unknown (Myers et al. 2013). Growing evidence suggests that ecological transformations can dramatically affect human health in ways that are both obvious and obscure (Myers and Patz 2009; Myers et al. 2013). The framework of ecosystem services, designed to evaluate the benefits that people derive from ecosystem products and processes, provides a compelling framework for integrating the many factors that influence the human health response to global change, as well as for integrating health impacts into broader analyses of the impacts of this change

Bayles, Brett R.↗

DOE OSTI2018

Comparative environmental and human health evaluations of thermolysis and solvolysis recycling technologies of carbon fiber reinforced polymer waste

Highlights: • Performed life cycle impact assessment (LCIA) of pyrolysis for CFRP waste recycling. • Performed LCIA of solvolysis using supercritical water (SCW) for CFRP recycling. • Performed comparative LCIA of pyrolysis vs SCW-based solvolysis for CFRP recycling. • Closed current knowledge gap about sustainability of SCW-based solvolysis. • Compared LCIA of pyrolyzer’s heating using natural gas in lieu of electricity. - Abstract: This quantitative research aims to compare environmental and human health impacts associated with two recycling technologies of CFRP waste. The ‘baseline’ recycling technology is the conventional thermolysis process via pyrolysis and the ‘alternative’ recycling technology is an emerging chemical treatment via solvolysis using supercritical water (SCW) to digest the thermoset matrix. Two Gate-to-Gate recycling models are developed using GaBi LCA platform. The selected functional unit (FU) is 1 kg CFRP waste and the geographical boundary of this comparative LCIA is defined to be within the U.S. The results of this comparative assessment brought to light new insights about the environmental and human health impacts of CFRP waste recycling via solvolysis using SCW and, therefore, helped close a gap in the current state of knowledge about sustainability of SCW-based solvolysis as compared to pyrolysis. Two research questions are posed to identify whether solvolysis recycling offers more environmental and human health gains relative to the conventional pyrolysis recycling. These research questions lay the basis for formulating two null hypotheses (H{sub 0,1} and H{sub 0,2}) and their associated research hypotheses (H{sub 1,1} and H{sub 1,2}). LCIA results interpretation included ‘base case’ scenarios, ‘sensitivity studies,’ and ‘scenarios analysis.’ The results revealed that: (a) recycling via solvolysis using SCW exhibits no gains in environmental and human health impacts relative to those impacts associated with recycling via pyrolysis and (b) use of natural gas in lieu of electricity for pyrolyzer’s heating reduces the environmental and human health impacts by 37% (lowest) and up to 95.7% (highest). It is recommended that on-going experimental efforts that focus only on identifying the best solvent for solvolysis-based recycling should also consider quantification of the energy intensity as well as environmental and human health impacts of the proposed solvents.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2016

Human Health and Environmental Risks Posed by Synthetic Biology R&D for Energy Applications: A Literature Analysis

What are the human health and environmental risks posed by synthetic biology research and development (R&D) for energy applications? In this study, we found it surprisingly difficult to answer this seemingly straightforward question in our review of the risk-related synthetic biology literature. To our knowledge, no entity to date has published a comprehensive review of this literature. Thus, this analysis aims to fill that void and, at a high level, answer the question that we pose. Risk-related synthetic biology literature addresses risk from different perspectives. Much of the literature that we reviewed treats the concept of risk in synthetic biology R&D broadly, enumerating few specific risks. Nevertheless, after reviewing >200 documents, we identified 44 discrete risk issues; 18 of those related to human health and 26 to the environment. We clustered these risk issues into categories that reflect and summarize their content. We categorized human health risk issues as follows: allergies, antibiotic resistance, carcinogens, and pathogenicity or toxicity. Environmental risk issues were categorized as follows: change or depletion of the environment, competition with native species, horizontal gene transfer, and pathogenicity or toxicity. Our efforts to understand what the synthetic biology R&D-related risk issues are stemmed from a larger research project in which we used risk issues identified in the literature as a point of departure in interviews with biosafety professionals and scientists engaged in synthetic biology R&D. Finally, we wrote this article after multiple biosafety professionals told us that accessing our risk-related literature analysis would aid them in their work.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Reducing nighttime light exposure in the urban environment to benefit human health and society

Nocturnal light pollution can have profound effects on humans and other organisms. Recent research indicates that nighttime outdoor lighting is increasing rapidly. Evidence from controlled laboratory studies demonstrates that nocturnal light exposure can strain the visual system, disrupt circadian physiology, suppress melatonin secretion, and impair sleep. There is a growing body of work pointing to adverse effects of outdoor lighting on human health, including the risk of chronic diseases, but this knowledge is in a more nascent stage. In this Review, we synthesize recent research on the context-specific factors and physiology relevant to nocturnal light exposure in relation to human health and society, identify critical areas for future research, and highlight recent policy steps and recommendations for mitigating light pollution in the urban environment.

Science & Technology - Other Topics↗

DOE OSTI2021

Utilizing Plant Synthetic Biology to Improve Human Health and Wellness

Plants offer a vast source of bioactive chemicals with the potential to improve human health through the prevention and treatment of disease. However, many potential therapeutics are produced in small amounts or in species that are difficult to cultivate. The rapidly evolving field of plant synthetic biology provides tools to capitalize on the inventive chemistry of plants by transferring metabolic pathways for therapeutics into far more tenable plants, increasing our ability to produce complex pharmaceuticals in well-studied plant systems. Plant synthetic biology also provides methods to enhance the ability to fortify crops with nutrients and nutraceuticals. In this review, we discuss (1) the potential of plant synthetic biology to improve human health by generating plants that produce pharmaceuticals, nutrients, and nutraceuticals and (2) the technological challenges hindering our ability to generate plants producing health-promoting small molecules.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2018

Land use and air quality in urban environments: Human health risk assessment due to inhalation of airborne particles

Highlights: • Biomonitors showed intraurban differences in particles bound metals. • The PM{sub 10} limit (150 µg/m{sup 3}) was exceeded in almost all land uses categories. • Industrial sites had an unacceptable carcinogenic risk (> 1 × 10{sup −4}). • Adults and elder are the most susceptible age groups. • Land use influence health risk due to particle inhalation. Particle matter (PM) and its associated compounds are a serious problem for urban air quality and a threat to human health. In the present study, we assessed the intraurban variation of PM, and characterized the human health risk associated to the inhalation of particles measured on PM filters, considering different land use areas in the urban area of Cordoba city (Argentina) and different age groups. To assess the intraurban variation of PM, a biomonitoring network of T. capillaris was established in 15 sampling sites with different land use and the bioaccumulation of Co, Cu, Fe, Mn, Ni, Pb and Zn was quantified. After that, particles were collected by instrumental monitors placed at the most representative sampling sites of each land use category and an inhalation risk was calculated. A remarkable intraurban difference in the heavy metals content measured in the biomonitors was observed, in relation with the sampling site land use. The higher content was detected at industrial areas as well as in sites with intense vehicular traffic. Mean PM{sub 10} levels exceeded the standard suggested by the U.S. EPA in all land use areas, except for the downtown. Hazard Index values were below EPA's safe limit in all land use areas and in the different age groups. In contrast, the carcinogenic risk analysis showed that all urban areas exceeded the acceptable limit (1 × 10{sup −6}), while the industrial sampling sites and the elder group presented a carcinogenic risk higher that the unacceptable limit. These findings validate the use of T. capillaris to assess intraurban air quality and also show there is an important intraurban variation in human health risk associated to different land use.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2013

A tiered approach for the human health risk assessment for consumption of vegetables from with cadmium-contaminated land in urban areas

Consumption of vegetables that are grown in urban areas takes place worldwide. In developing countries, vegetables are traditionally grown in urban areas for cheap food supply. In developing and developed countries, urban gardening is gaining momentum. A problem that arises with urban gardening is the presence of contaminants in soil, which can be taken up by vegetables. In this study, a scientifically-based and practical procedure has been developed for assessing the human health risks from the consumption of vegetables from cadmium-contaminated land. Starting from a contaminated site, the procedure follows a tiered approach which is laid out as follows. In Tier 0, the plausibility of growing vegetables is investigated. In Tier 1 soil concentrations are compared with the human health-based Critical soil concentration. Tier 2 offers the possibility for a detailed site-specific human health risk assessment in which calculated exposure is compared to the toxicological reference dose. In Tier 3, vegetable concentrations are measured and tested following a standardized measurement protocol. To underpin the derivation of the Critical soil concentrations and to develop a tool for site-specific assessment the determination of the representative concentration in vegetables has been evaluated for a range of vegetables. The core of the procedure is based on Freundlich-type plant–soil relations, with the total soil concentration and the soil properties as variables. When a significant plant–soil relation is lacking for a specific vegetable a geometric mean of BioConcentrationFactors (BCF) is used, which is normalized according to soil properties. Subsequently, a ‘conservative’ vegetable-group-consumption-rate-weighted BioConcentrationFactor is calculated as basis for the Critical soil concentration (Tier 1). The tool to perform site-specific human health risk assessment (Tier 2) includes the calculation of a ‘realistic worst case’ site-specific vegetable-group-consumption-rate-weighted BioConcentrationFactor. -- Highlights: • A scientifically-based and practical procedure has been developed for assessing the human health risks from the consumption of vegetables. • Uptake characteristics of cadmium in a series of vegetables is represented by a vegetable-group-consumption-rate-weighted BioConcentrationFactor. • Calculations and measurement steps are combined.

60 APPLIED LIFE SCIENCES↗

DOE OSTI2025

Long‐Term Impacts of Global Solid Biofuel Emissions on Ambient Air Quality and Human Health for 2000–2019

Globally, solid biofuels (SB) have been widely used for household cooking and energy production for decades due to electricity shortages and socio-economic barriers to adopting renewable energy alternatives. This has detrimental effects on air quality, human health, and climate through trace gas and aerosol emissions. Despite numerous studies, the long-term consequences of SB emissions remain poorly understood. Here, we use the Community Earth System Model and the Community Emissions Data System emission inventory to investigate the SB emission impacts on air quality and human health for 2000–2019. Global SB emission increased the ambient PM 2.5 (particulate matter with aerodynamic diameters ≤2.5 μm) and ozone (O 3 ) concentrations up to 23.61 μg/m 3 and 13.69 ppbv, with significant effects found in India, China, and the Rest of Asia (ROA). Our study estimates total annual premature deaths (APDs) associated with global SB-attributable PM 2.5 and O 3 exposure as 1.11 million [95% confidence interval (95% CI): 1.00–1.22 million] in 2000 up to 1.43 million (95% CI: 1.30–1.56 million) in 2019. China's SB emissions and associated APDs have reduced substantially, whereas India and ROA had a major leap in both estimates in 2019 compared to 2000. China's progress in cutting residential SB emissions accounts for its improvements. Our study urges the reduction of SB usage and emissions to potentially improve overall air quality and human health conditions, especially in highly populated, low- and middle-income countries, where the poor air quality and associated health burden attributable to SB emissions are estimated to be higher.

O 3↗

DOE OSTI2016

Using In Vitro High‐Throughput Screening Data for Predicting Benzo[k]Fluoranthene Human Health Hazards

Today there are more than 80,000 chemicals in commerce and the environment. The potential human health risks are unknown for the vast majority of these chemicals as they lack human health risk assessments, toxicity reference values, and risk screening values. We aim to use computational toxicology and quantitative high‐throughput screening (qHTS) technologies to fill these data gaps, and begin to prioritize these chemicals for additional assessment. In this pilot, we demonstrate how we were able to identify that benzo[k]fluoranthene may induce DNA damage and steatosis using qHTS data and two separate adverse outcome pathways (AOPs). We also demonstrate how bootstrap natural spline‐based meta‐regression can be used to integrate data across multiple assay replicates to generate a concentration–response curve. We used this analysis to calculate an in vitro point of departure of 0.751 μM and risk‐specific in vitro concentrations of 0.29 μM and 0.28 μM for 1:1,000 and 1:10,000 risk, respectively, for DNA damage. Based on the available evidence, and considering that only a single HSD17B4 assay is available, we have low overall confidence in the steatosis hazard identification. This case study suggests that coupling qHTS assays with AOPs and ontologies will facilitate hazard identification. Combining this with quantitative evidence integration methods, such as bootstrap meta‐regression, may allow risk assessors to identify points of departure and risk‐specific internal/ in vitro concentrations. These results are sufficient to prioritize the chemicals; however, in the longer term we will need to estimate external doses for risk screening purposes, such as through margin of exposure methods.

Burgoon, Lyle D.↗

DOE OSTI2020

A global analysis on the systemic effects of antibiotics in cultured fish and their potential human health risk: a review

Abstract The rearing of fish in intensive systems reduces their immunity leading to eruption of diseases, consequently prompting the use of antibiotics. Antibiotics are currently used in cultured fish globally to treat/prevent diseases. On the one hand, antibiotics used in aquaculture help to improve fish health by killing or inhibiting pathogenic bacteria proliferation. However, on the other hand, they cause multiple side effects. To date, information on systemic effects of antibiotics in cultured fish is scattered and their potential human health risk remains elusive. This review critically analyses and discusses the available information in the literature on the positive and negative effects of antibiotics in cultured fish and their potential human health risk via fish consumption. The review found 44 different antibiotics dominated by oxytetracycline were studied in various fish species worldwide. Antibiotics used in global aquaculture either decrease or increase fish growth and survival rates. They induce oxidative stress, which affect antioxidant and detoxification responses and cause host–microbiota dysbiosis. These changes compromise the fish immunity system, which ultimately lead to cellular damage. The toxicities generated inhibit the fish aerobic glycolysis, suppress lipogenesis and fatty acid β‐oxidation while increase energy demand by initiating gluconeogenesis and anaerobic glycolysis. Consumption of fish treated with antibiotics causes human health risk. Future studies are required on agents to restore dysfunctions induced by antibiotics in cultured fish, while attempts to limit their utilisation in aquaculture production are underway. [Correction added on 21 November 2020, after first online publication: The abstract has been amended to clarify the scope of the review.]

Limbu, Samwel Mchele↗

DOE OSTI2023

Human Health Risk Assessment for Improper Landfill Disposal of End-of-Life CdTe PV

The present work is a continuation of the 2020 IEA PVPS Task 12 Human Health Risk Assessment Methods for PV Part 3: Module Disposal Risks. The 2020 report performed a human health risk assessment (HHRA) for disposal of a cadmium telluride (CdTe) PV module in an unlined landfill, focusing solely on risks from cadmium. This study extends the 2020 HHRA on CdTe PV, analyzing eleven constituent elements: Cd, Se, Te, Cu, Si, Cr(III), Mo, Sn, Zn, Ni, and Al. The present HHRA was performed through two methods: utilization of the U.S. Environmental Protection Agency's (USEPA) Delisting Risk Assessment Software (DRAS V.4.0) on eight exposure pathways for cancer risk and non-cancer hazards; and comparison of exposure point concentrations to federal standards for groundwater, surface water, air, and soil exposure pathways. Cancer risks and non-cancer hazards posed by elemental leaching through all evaluated exposure pathways, using both methods, were found to be several orders of magnitude below USEPA health-protective thresholds. Cadmium exhibited both the highest risks and lowest uncertainty considering data availability on chemical content, leachate, and federal screening levels.

chemicals↗

DOE OSTI2024

Human Health Risk Assessment for Improper Landfill Disposal of End-of-Life CdTe Modules

CdTe↗

DOE OSTI2017

Co-benefits of global, domestic, and sectoral greenhouse gas mitigation for US air quality and human health in 2050

Policies to reduce greenhouse gas (GHG) emissions can bring ancillary benefits of improved air quality and reduced premature mortality, in addition to slowing climate change. Here we study the co-benefits of global and domestic GHG mitigation on US air quality and human health in 2050 at fine resolution using dynamical downscaling, and quantify for the first time the co-benefits from foreign GHG mitigation. Relative to a reference scenario, global GHG reductions in RCP4.5 avoid 16000 PM2.5-related all-cause deaths yr-1 (90% confidence interval, 11700-20300), and 8000 (3600-12400) O3-related respiratory deaths yr-1 in the US in 2050. Foreign GHG mitigation avoids 15% and 62% of PM2.5- and O3-related total avoided deaths, highlighting the importance of foreign GHG mitigation on US human health benefits. GHG mitigation in the US residential sector brings the largest co-benefits for PM2.5-related deaths (21% of total domestic co-benefits), and industry for O3 (17%). Monetized benefits, for avoided deaths from ozone, PM2.5, and heat stress from a related study, are $148 ($96-201) per ton CO2 at high valuation and $49 ($32-67) at low valuation, of which 36% are from foreign GHG reductions. These benefits likely exceed the marginal cost of GHG reductions in 2050. The US gains significantly greater co-benefits when coordinating GHG reductions with foreign countries. Similarly, previous studies estimating co-benefits locally or regionally may greatly underestimate the full co-benefits of coordinated global actions.

Zhang, Yuqiang (ORCID:0000000291617086)↗

DOE OSTI2022

200-IA-1 Operable Unit Human Health Risk and Kd Screen

The purpose of this environmental calculation file (ECF) is to provide the following: Document the data processing and data reduction steps taken to prepare the 200-IA-1 Operable Unit (OU) data set that will be used to calculate the sample-specific screening level human health risk evaluation; Document the data processing and data reduction steps taken to prepare the 200-IA-1 OU data set that will be used to identify analytes that could potentially impact groundwater in the future beneath the 200-IA-1 OU representative waste sites; Document the assumptions, equations, and methodologies used to calculate the screening levels for human health cancer risks and noncancer hazards for each representative waste site assigned to the 200-IA-1 OU. Individual measured soil concentrations from 0 to 4.6 m (15 ft) below ground surface (bgs) (shallow vadose zone) are used to calculate the total excess lifetime cancer risk (ELCR) and hazard index (HI) for the outdoor worker scenario to determine if there is a basis for remedial action. Individual measured soil concentrations from the ground surface to the groundwater table are used for the distribution coefficient (Kd) screen to identify analytes that could potentially impact groundwater in the future beneath the 200-IA-1 OU representative waste sites. This ECF supports DOE/RL-2020-51, 200-IA-1 OU Focused Feasibility Study, under the Comprehensive Environmental Response, Compensation, and Liability Act of 1980 (CERCLA). A risk characterization based upon the evaluation of the health risk estimates developed in this ECF will be presented in the focused feasibility study report.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗

DOE OSTI2020

Task 12 PV Sustainability - Human Health Risk Assessment Methods for PV, Part 3: Module Disposal Risks

End-of-life management is important for addressing large future photovoltaic (PV) waste volumes and conserving raw materials for use in new PV modules. In regions without regulatory mandates for PV recycling, end-of-life PV modules can be disposed in accordance with general waste laws. Given the use of various metals as raw materials in semiconductor compounds and electrical contacts in commercial PV modules, some stakeholders have raised concerns regarding potential environmental impacts if PV modules are subject to improper disposal instead of being recycled or disposed in sanitary landfills, as is required in most world regions. To evaluate these concerns, screening-level risk assessment methods are developed herein that evaluate potential human health risks from groundwater and surface (air, soil, surface water) exposure pathways. The methods estimate potential impacts from disposal of end-of-life (EOL) PV modules in non-sanitary landfills under the following worst-case conditions: no leachate collection or groundwater monitoring, no liner for preventing leachate migration, uncovered waste, and lack of stormwater management. Examining worst-case conditions allows the exploration of maximum potential risk to attempt to ensure disposal does not increase health risk above regulatory thresholds. Specifically, this report presents an analysis of potential human health risks associated with non-sanitary landfill disposal for three PV technologies, focusing on release of the highest-prioritized chemical element for each: lead (Pb) in crystalline-silicon (c-Si) PV modules, cadmium (Cd) in thin film cadmium telluride (CdTe) PV modules, and selenium (Se) in thin film copper indium selenide (CIS) PV modules. The prioritization of these chemical elements for analysis is based on stakeholder interest. Because the methodology is chemical-specific, the risk assessment results for these chemicals cannot be directly generalized to other chemicals, although the risk assessment methodology can be applied to other chemicals. If the chemicals chosen are indeed the ones presenting greatest risk, then the results herein should represent the upper bound of health risk from exposure to a single constituent.

14 SOLAR ENERGY↗

DOE OSTI2022

Quantifying Impacts of Renewable Electricity Deployment on Air Quality and Human Health in Southeast Asia Based on Aims III Scenarios

Exposure to outdoor air pollution is the largest environmental risk factor for death and disease worldwide, associated with millions of cases of excess deaths (mortality) each year. Although there are many pollutants in the air that affect our health, the most important class of pollutants is fine particulate matter, PM 2.5 , which are airborne particles of diameter ≤2.5 micrometers (µm). These particles are small enough to deposit deep in the respiratory system where they can then enter the bloodstream, traveling and causing damage to other bodily systems. Exposure to outdoor (ambient) PM 2.5 has been found to be the most important environmental risk factor for mortality in Southeast Asia, associated with 130,000 - 320,000 excess deaths in Association of Southeast Asian Nations (ASEAN) member countries in 2019. Southeast Asia, especially its mega-cities, but also other areas, has some of the worst air quality in the world. Almost all human activity emits air pollutants. Fine particulate matter is both directly emitted and formed in the atmosphere through chemical reactions, the latter of which requires modeling to predict. Power generation is one of the major sources of air pollutants that lead to elevated concentrations of fine particulate matter, including in Southeast Asia. Fossil fuel combustion for power generation, especially coal but also diesel, is the main source of air pollutant emissions from power generation. While natural gas burns cleaner than coal or diesel, in the quantities combusted for power generation in Southeast Asia, it is also a significant emitter. This study augments the ASEAN Interconnection Masterplan Study III (AIMS III) by quantifying changes to air quality and human health that result from its renewable integration and transmission interconnection scenarios. Performing this analysis requires translation of the changes in projected generation from different power sector fuel sources in the AIMS III scenarios to changes in air pollutant emissions, developing what's known as an emissions inventory for each scenario and year evaluated. We then use for the first time a new global, reduced-complexity air quality model to transform the changes in emissions to changes in air pollutant concentration of the deadliest air pollutant for human health, fine particulate matter (or PM 2.5 ). The air quality model, Global InMAP, then utilizes the location of human population in ASEAN countries to calculate exposure to PM 2.5 concentration changes and translates that to estimates of excess mortality attributable to the AIMS III scenarios.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

DOE OSTI2018

Improving human health outcomes with a low-cost intervention to reduce exposures from lead acid battery recycling: Dong Mai, Vietnam

Highlights: • A low-cost soil lead mitigation project in Vietnam is detailed and assessed. • The effort resulted in substantial declines in biological and environmental lead levels. • The approach could be replicated elsewhere to address a commonly occurring issue. This study details the first comprehensive evaluation of the efficacy of a soil lead mitigation project in Dong Mai village, Vietnam. The village's population had been subject to severe lead poisoning for at least a decade as a result of informal Used Lead Acid Battery (ULAB) recycling. Between July 2013 to February 2015, Pure Earth and the Centre for Environment and Community Development (Hanoi, Vietnam) implemented a multi-faceted environmental and human health intervention. The intervention consisted of a series of institutional and low-cost engineering controls including the capping of lead contaminated surface soils, cleaning of home interiors, an education campaign and the construction of a work-clothes changing and bathing facility. The mitigation project resulted in substantial declines in human and environmental lead levels. Remediated home yard and garden areas decreased from an average surface soil concentration of 3940 mg/kg to <100 mg/kg. One year after the intervention, blood lead levels in children (<6 years old) were reduced by an average of 67%—from a median of 40.4 μg/dL to 13.3 μg/dL. The Dong Mai project resulted in significantly decreased environmental and biological lead levels demonstrating that low-cost, rapid and well-coordinated interventions could be readily applied elsewhere to significantly reduce preventable human health harm.

54 ENVIRONMENTAL SCIENCES↗