SEARCH · Search NASA

Results for “Hydrodeoxygenation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Kinetics and Reaction Mechanisms of Acetic Acid Hydrodeoxygenation over Pt and Pt–Mo Catalysts

In this work, kinetic measurements for silica-supported Pt and Pt-Mo catalysts were collected in vapor-phase acetic acid hydrodeoxygenation by varying the hydrogen partial pressure between 18 and 72 kPa and acetic acid partial pressure between 7 and 18 kPa at 423-473 K. At all testing conditions, the Pt-Mo catalyst was more active and selective. In addition, the apparent activation energy for Pt-Mo of 76±3 kJ/mol was lower than that of 84±4 kJ/mol for Pt. The apparent reaction orders were also different. The order in hydrogen of 0.8±0.1 for Pt-Mo changed to zero at higher hydrogen partial pressures while that for Pt remained constant at 0.6±0.1. A near-zero order in acetic acid for Pt-Mo changed to -2.1 at higher acetic acid pressures while that for Pt remained constant at -2.9±0.3. These differences in reaction kinetics as well as in selectivity trends with changes in temperature and feed composition indicated a change in the reaction mechanism for Pt-Mo. The catalysts were characterized with hydrogen temperature programmed desorption, oxygen temperature programmed oxidation and transmission electron microscopy with energy-dispersed X-ray spectroscopy elemental mapping. Mo was present in the form of subnanometer-size clusters on the surface of Pt nanoparticles. Both Pt and Pt-Mo catalysts were stable under the reaction conditions for 10 h, and the size and structure of Pt and Pt-Mo particles remained mostly unchanged, without coke accumulation. Density functional theory calculations show that surface acetate is not a major reaction intermediate on both Pt and Pt-Mo and, instead, C-OH bond splitting with the formation of acetyl is the first reaction step in hydrodeoxygenation. The activation energy for this step is dramatically lower on Pt-Mo. Furthermore, the activity of acetyl on Pt-Mo is different. Unlike on pure Pt, the reaction of C-O bond splitting becomes exothermic with a lower activation energy on Pt-Mo, and the reaction of C-C bond splitting, in contrast, becomes endothermic with a higher activation energy, explaining the experimentally observed higher activities and selectivities of Pt-Mo. In addition, the calculations demonstrate that a pair of Pt-Mo surface atoms acts as a single active site where Mo serves as a preferential binding anchor for O atoms. The presence of Mo atoms changes the structure and energy of adsorbed and reacting surface species.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Computational Investigation of the Catalytic Hydrodeoxygenation of Propanoic Acid over a Cu(111) Surface

Cu-based alloy catalysts have recently been investigated experimentally for the hydrodeoxygenation (HDO) of biomass-derived organic acids. Here, the HDO of propanoic acid (PAc) has been studied over Cu(111) by mean-field microkinetic modeling based on parameters obtained from first-principles calculations. Models were developed for the gas- and liquid-phase HDO in condensed water and 1,4-dioxane. In agreement with experimental observations, the gas-phase PAc conversion rate is low at 573 K and increases in liquid water by 1 order of magnitude. In all reaction environments, the decarboxylation mechanism is dominant at low hydrogen partial pressures less than 0.1 bar, and the C–COO bond dissociation is the rate-controlling elementary step. This observation contrasts with the rate-controlling step identified over most group VIII metal surfaces, which is the C–OH bond dissociation in the decarbonylation mechanism. At high hydrogen (H 2 ) partial pressures greater than 10 bar, the HDO of PAc produces propionaldehyde that can readsorb and further react through decarbonylation to produce C 2 alkane products, which is conceptually different from the low H 2 partial pressure scenario. At high H 2 partial pressures, the initial hydrogenation at the carbonyl carbon of PAc becomes the rate-controlling elementary step.

Catalysts↗

DOE OSTI2024

Machine Learning Accelerated First-Principles Study of the Hydrodeoxygenation of Propanoic Acid

The complex reaction network of catalytic biomass conversions often involves hundreds of surface intermediates and thousands of reaction steps, greatly hindering the rational design of metal catalysts for these conversions. Here, we present a framework of machine learning (ML)-accelerated first-principles studies for the hydrodeoxygenation (HDO) of propanoic acid over transition metal surfaces. The microkinetic model (MKM) is initially parametrized by ML-predicted energies and iteratively improved by identifying the rate-determining species and steps (RDS), computing their energies by density functional theory (DFT), and reparameterizing the MKM until all the RDS are computed by DFT. The Gaussian process (GP) model performs significantly better than the linear ridge regression model for predicting both the adsorption free energies and transition state free energies. Parameterized with energies from the GP model, only 5–20% of the full reaction network has to be computed by DFT for the MKM to possess DFT-level accuracy for the TOF and dominant reaction pathway. While the linear ridge regression model performs worse than the GP model, its performance is greatly improved when only transition states are predicted by the regression model and adsorption energies are computed by DFT. Overall, we find that a high accuracy in adsorption free energies is more important for a reliable MKM than a high accuracy in TS free energies. Lastly, based on the GP model with GOH and GCHCHCO as catalyst descriptors, we build two-dimensional volcano plots in activity and selectivity that can help design promising alloy catalysts for HDO reactions of organic acids.

adsorption↗

DOE OSTI2022

Continuous hydrodeoxygenation of lignin to jet-range aromatic hydrocarbons

Sustainable aviation fuel (SAF) is essential to decrease the carbon footprint of the aviation industry. Although many strategies have been developed to provide the branched, aliphatic components of SAF, few viable strategies have been demonstrated to supply the aromatic and cycloalkane fraction of SAF at the necessary scale from bio-based feedstocks. Lignin is the largest natural source of renewable aromatic compounds, yet major challenges in deoxygenation have prevented its use as a feedstock for SAF. Here we report a continuous, two-stage catalytic process using molybdenum carbide to deoxygenate lignin from poplar into aromatic hydrocarbons with 87.5% selectivity towards aromatic hydrocarbons at 86% of the theoretical carbon recovery. This work demonstrates an effective approach to convert lignin into aromatic SAF blendstocks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Integrated hydropyrolysis and vapor-phase hydrodeoxygenation process with Pd/Al 2 O 3 for production of advanced oxygen-containing biofuels from cellulosic wastes

This study focuses on developing advanced oxygen-containing biofuels with high furan, cyclic ketone, and ethanol content from holocellulose and cellulosic wastes. To achieve this, we employed an integrated process that combined hydropyrolysis and vapor-phase hydrodeoxygenation using Pd/Al 2 O 3 as a catalyst. In the first stage, the non-catalytic hydropyrolysis of hemicellulose resulted in furfural and acetic acid fractions that were effectively converted into furans, cyclic ketones, and ethanol in the second-stage reactor over Pd/Al 2 O 3 under 0.3 MPa H 2 . We found that a hydropyrolysis temperature of 440 °C in the first stage reactor resulted in the highest yield of oxygen-containing biofuels (171.1 mg/g) with 89.2% hemicellulose conversion. However, increasing the hydrodeoxygenation temperature in the second stage reactor reduced the yield of oxygen-containing biofuels, and at 400 °C, excess deoxygenation led to hydrocarbon production. The Pd/Al 2 O 3 catalyst demonstrated high stability during the vapor-phase hydrodeoxygenation of primary furfural and acetic acid intermediates, with only 2.1% coke formation after three reaction cycles. This scalable process enables the conversion of various cellulosic wastes into advanced oxygen-containing biofuels, with considerable total yields. Our findings suggest that this integrated process holds great promise for converting biomass waste into advanced oxygen-containing biofuels.

09 BIOMASS FUELS↗

DOE OSTI2020

Theoretical Investigation of Solvent Effects on the Hydrodeoxygenation of Propionic Acid over a Ni(111) Catalyst Model

The effect of two solvents, liquid water and 1,4-dioxane, has been studied from first principles on the hydrodeoxygenation of propionic acid over a Ni (111) catalyst surface model. A mean-field microkinetic model was developed to investigate these effects at a temperature of 473 K. Under all reaction conditions, a decarbonylation mechanism is favored significantly over a decarboxylation pathway. Although no significant solvent effects were observed on the decarbonylation rate, a substantial solvent stabilization of two key surface intermediates in the decarboxylation mechanism, CH 3 CCOO and CH 3 CHCOO, lead to a notable increase of the decarboxylation rate by two orders of magnitude in liquid water and by one order of magnitude in liquid 1,4-dioxane. Furthermore, a significant solvent stabilization of the transition state of C-H bond cleavage of the α-carbon of CH 3 CHCO, relative to the stabilization of the C-C bond cleavage of the α-carbon of CH 3 CHCO, leads to a change in dominant pathway in the liquid phase environments. Finally, a sensitivity analysis shows that the C-OH bond cleavage of propionic acid and C-C bond cleavage of the α-carbon of CH 3 CHCO are the most rate controlling states in the gas phase. In contrast, in solvents the dehydrogenation of CH 3 CHCO becomes the most influential step. This shift in rate controlling state is attributed to the solvent effect on the dehydrogenation of CH 3 CHCO, which is facilitated in aqueous phase. Altogether, it is likely that the investigated (111) facet of Ni is not active for the hydrodeoxygenation of propionic acid in neither the gas nor liquid phase and other Ni facets or phases must be responsible for the experimentally observed kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Interaction of Anisole on Alumina-Supported Ni and Mo Oxide Hydrodeoxygenation Catalysts

The conversion of biomass to transportation fuels and value-added chemicals is a promising method to reduce reliance on fossil fuels. Mo-based catalysts have been shown to be highly active in the hydrodeoxygenation of biomass-derived phenolic compounds. The catalyst active phase, surface species, and the effect of adding additional metals is not comprehensively understood. Here we compare the temperature-dependent adsorption behavior of the model compound anisole 2 on an alumina-supported mixed nickel molybdenum oxide catalyst with two reference catalysts of molybdenum oxide and nickel oxide. Raman spectroscopy showed that the catalysts contain significant amounts of molybdates and molybdoaluminates, in addition to NiMoO 4 in the nickel molybdenum catalyst and MoO 3 in the molybdenum-only catalyst. Using transmission infrared spectroscopy under a controlled environment, we find that anisole chemisorbed largely through the oxygen in the methoxy group to form surface-bound phenoxy and methoxy species on all the catalysts. Ambient pressure X-ray photoelectrons spectroscopy measurements of the catalysts in anisole vapor showed reduced Mo atoms are the binding sites. The surface interaction and removal temperature of these species varied with the metal composition. The MoO x component dominated the adsorption behavior in both MoO x and NiMoO x catalysts. The formation of new aromatics, including methylated rings, depended on Ni composition. Upon adding hydrogen to induce the hydrodeoxygenation of anisole, undesirable polynuclear aromatic species were quickly formed on the Mo-based catalysts. In conclusion, these results suggest that the molybdenum oxide controls the adsorption and reactivity of the surface species, with a cooperative effect by Ni.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Engineering the Composition of Bimetallic Nanocrystals to Improve Hydrodeoxygenation Selectivity for 2-Acetylfuran

Hydrodeoxygenation (HDO) of 2-acetylfuran (2-AF) was examined at 473 K and 33 bar over carbon-supported, bimetallic catalysts. Monodispersed, Pt-based (PtNi, PtCo, and PtCu) and Ni-based (NiCu) nanocrystals (NCs) with well-defined sizes and compositions were prepared via colloidal synthesis. Steady-state, flow-reactor measurements demonstrate that selectivities for the HDO reaction to 2-ethylfuran (2-EF) are strongly dependent on the alloy compositions. The HDO of 2-AF is shown to be sequential, where 2-EF can react further to form over-hydrogenated products. The NiCu 3 /C nanocatalyst was superior to the other bimetallics; with the optimal residence time, it was possible to achieve a selectivity of 75% 2-EF with 80% conversion of 2-AF, with good stability for up to at least 5 hours time-on-stream. Deactivation due to coking became an issue when the NCs were deposited on oxide supports with weak acidity (SiO 2 and γ-Al 2 O 3 ). Furthermore, this work provides insights into which bimetallic catalytic systems might be useful for HDO of 2-AF reaction.

2-acetylfuran↗

DOE OSTI2024

Engineered $\mathrm{Ru}$ on $\mathrm{HY}$ zeolite catalyst for continuous and selective hydrodeoxygenation of lignin phenolics to cycloalkanes under moderate conditions

Here we report a continuous selective hydrodeoxygenation (HDO) process of guaiacol conversion to cycloalkanes under 180 °C/1 MPa, which results in improved HDO chemistry for lignin-based jet fuel production. The incipient wetness impregnation method was modified to prepare an HY zeolite-supported Ru catalyst with better metal dispersion and acid site uniformity, which overcomes the low conversion and selectivity of previous literature. The modified catalyst (Ru-HY-60-MI) was tested in a continuous fixed bed reactor, resulting in increased HDO conversion of guaiacol to cycloalkanes compared to the unmodified catalyst. Pressure, temperature, and weight hourly space velocity-dependent tests validate guaiacol HDO over Ru-HY-60-MI catalyzed ring hydrogenation of guaiacol to 2-methoxycyclohexanol, acid-catalyzed demethoxylation and dehydration to cyclohexene, and further hydrogenation of cyclohexene to cyclohexane. These experiments enable exploring a continuous HDO process, demonstrate effectiveness for other ß-ß and a-O-4 lignin representatives and real lignin bio-oil, and pave the way towards commercialization of lignin-based jet fuel

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Towards improved conversion of wet waste to jet fuel with atomic layer deposition-coated hydrodeoxygenation catalysts

The conversion of wet waste-derived volatile fatty acids into jet fuel-range hydrocarbons is a promising route for increasing the production of sustainable aviation fuel; however, the cost and moderate alkane selectivity of Pt-based hydrodeoxygenation catalysts present challenges for commercialization. Here, to address this, we used atomic layer deposition to apply TiO 2 overcoats to Pt/Al 2 O 3 catalysts and create new interface sites that exhibited 8 times higher site time yield of the desirable n-alkane product than uncoated catalyst. Through TPR/TPD, XPS, CO DRIFTS, and DFT calculations, we found that the increased selectivity of the ALD-coated catalyst was due to the creation of O vacancies at the Pt-TiO 2 interface under reducing conditions, resulting in new Ti 3+ acid sites near the active metal. Maximum conversion and alkane selectivity during HDO was achieved with an ALD-coated 0.5% wt Pt catalyst, indicating that TiO 2 ALD can be used to maximize the utility of precious-metal catalysts.

09 BIOMASS FUELS↗

DOE OSTI2020

Applicability of the Delplot method for the determination of catalytic reaction sequences: Hydrodeoxygenation of $\gamma$-valerolactone on Ni 2 P/MCM-41

Contact-time measurements based on sites are used to investigate the reaction sequence of the hydrodeoxygenation of γ-valerolactone (GVL) on Ni 2 P/MCM-41. Here the study is carried out at 300 °C and 0.5 MPa with site times of 0.29–6.1 s. A reaction network is proposed in which pentanoic acid and 2-methyltetrahydrofuran (2-MTHF) are formed in parallel initially and pentanal, butane and pentane are formed subsequently. A first-rank Delplot analysis (selectivity) gives a good fit, but higher-rank Delplots do not. The lack of applicability is explained by the magnitude of the rate constants, in which the rate constant for one of the later steps (the consumption of pentanal) is substantially larger than those for the preceding steps. For this reason, pentanal demonstrated the characteristics of a primary product and consequently affected the discrimination of higher rank products. A simulation of a model sequence with assumed rate constants confirms the reason why the Delplot method does not work for this reaction. Since the rate constants cannot be determined a priori to be of close magnitude, the Delplot method cannot be generally used to ascertain reaction sequences.

42 ENGINEERING↗

DOE OSTI2020

Investigation of the reaction mechanism of the hydrodeoxygenation of propionic acid over a Rh(1 1 1) surface: A first principles study

Microkinetic models based on first principles calculations have been used to study the vapor and liquid phase hydrodeoxygenation of propionic acid on a Rh(111) surface. Calculations suggest that both decarboxylation and decarbonylation do not occur at an appreciable rate under all reaction environments. Propanol and propionaldehyde are the main products on this surface and they are produced at similar rates in both vapor and liquid phase environments. While a condensed phase can shift the reaction rate, the dominant pathways and selectivity towards the various products are hardly affected. At 473 K, the turnover frequency is increased by about a factor of 1.5 in liquid water relative to the gas phase. In liquid 1,4-dioxane, the turnover frequency is also slightly increased relative to the gas phase. Here, given the uncertainty in Rh cavity radius in the liquid phase calculations, computations with different cavity radii have been performed. With larger Rh cavity radius, the promotional effect of the solvents on the turnover frequency becomes more significant, while practically no changes are observed for a smaller cavity radius.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

The effects of SMSI on m-Cresol Hydrodeoxygenation over Pt/Nb 2 O 5 and Pt/TiO 2

The hydrodeoxygenation (HDO) of m-cresol was studied on Pt/Nb 2 O 5 /MgAl 2 O 4 and Pt/TiO 2 /MgAl 2 O 4 catalysts to understand the effects of Strong Metal Support Interactions (SMSI). The Nb 2 O 5 and TiO 2 supports were prepared as 0.7-nm films on MgAl 2 O 4 by Atomic Layer Deposition (ALD) to ensure that the structures of the catalyst were the same. When reduced at 773 K to place Pt in the encapsulated state, Pt/Nb 2 O 5 /MgAl 2 O 4 was much less active than Pt/MgAl 2 O 4 at 573 K but much more active at 623 K. While Pt/MgAl 2 O 4 deactivated rapidly due to coking, Pt/Nb 2 O 5 /MgAl 2 O 4 showed significantly better coke tolerance and was almost 100% selective towards toluene production. Pt/Nb 2 O 5 /MgAl 2 O 4 reduced at lower temperatures exhibited intermediate catalytic properties. The effect of reduction temperature on Pt/TiO 2 /MgAl 2 O 4 was much less and this catalyst was more similar to Pt/MgAl 2 O 4 than its Nb 2 O 5 counterpart. Lastly, the implications of these results for understanding the nature of oxide promoters on HDO of m-cresol are discussed.

09 BIOMASS FUELS↗

DOE OSTI2021

The Delplot kinetic method applied to systems with adsorbates: Hydrodeoxygenation of benzofuran on a bimetallic CoPd phosphide catalyst supported on KUSY

The Delplot method provides a means of analyzing conversion and selectivity data to derive a reaction sequence and has been applied so far to gas-phase or liquid-phase species. This study analyses the applicability of the method for catalytic reactions and considers for the first time adsorbed intermediates. The method is applied to a contact time study of the hydrodeoxygenation (HDO) of benzofuran at 0.5 MPa and 350 °C over a catalyst consisting of bimetallic CoPd phosphide supported on a potassium ion-exchanged ultra-stable Y (KUSY) zeolite. Both simple and detailed reaction networks were derived. The simple networks considered only gas-phase species and were modeled by a first-order sequence of steps, whereas the detailed network took into account adsorbed intermediates and was simulated using a rake mechanism. The networks were compared using F-statistics, which accounted for the differences in the number of fitting parameters. The detailed network gave a better fit to the experimental data because it represented a more realistic description of the transformation. A suggested sequence from the Delplot method was consistent with the simple network but not with the detailed network. The lack of applicability of the Delplot analysis to the network with adsorbates was linked to overly large equilibrium constants, a determination supported by Delplot fitting for a model sequence. Further, this study indicated the inapplicability of the Delplot method in determining reaction sequences that involve adsorbed species with large equilibrium constants for formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Understanding the influence of solvents on the Pt-catalyzed hydrodeoxygenation of guaiacol

Bio-oil derived from fast pyrolysis of lignocellulosic biomass needs to be deoxygenated to become a substitute for petroleum fuels. Here, we study the hydrodeoxygenation mechanism of guaiacol, a bio-oil model compound derived from the lignin fraction of biomass, on Pt(1 1 1) terrace sites in the presence of water, diethyl ether, 1-butanol, and n-hexane as solvent. Using first-principles periodic density functional theory (DFT) calculations and mean-field microkinetic reactor modeling, a detailed reaction mechanism is investigated targeting various products such as catechol, phenol, anisole, benzene, cyclohexanone, and cyclohexanol. Solvent phase DFT outcomes are mostly similar to that of the vapor phase; however, microkinetic modeling results suggest that rate controlling species and transition states differ somewhat in the various reaction environments. Catechol was found to be the major aromatic product across all reaction environments. Over Pt(1 1 1), unsaturated monooxygenate production from catechol is unlikely.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Identification of Active Metal Carbide and Nitride Catalytic Facets for Hydrodeoxygenation Reactions

The catalytic hydrodeoxygenation (HDO) reaction is of considerable interest for biomass conversion to valuable chemicals and fuels, where one of the critical bottlenecks is the lack of cost-effective and efficient catalysts. To discover cost-efficient catalysts for the HDO reaction, we employed a density functional theory-based hierarchical catalyst design strategy based on catalytic descriptors, reaction energy profiles, and microkinetic modeling (MKM). We focused on the carbide and nitride catalyst space, for which we calculated 121 catalyst surfaces of Mo 2 C, MoC, Mo 2 N, W 2 C, NbC, VC, VN, and NbN catalysts. Based on the computed surface energies, reaction energies of oxygen removal, carbon binding strength, and the surface area of nanoparticles, the likely active facets are the Mo 2 C(111), MoC(011), VN(100), Mo 2 N(001), Mo 2 N(011), and Mo 2 N(100) surfaces. Further, detailed energy profiles were obtained, and MKM was performed for a model reaction (glycolaldehyde + 2H 2 . ethylene + 2H 2 O) on the Mo 2 C(111), VN(100), and MoC(100) surfaces. Based on the computed volcano map obtained from MKM, the predicted active facets for this HDO reaction are the Mo 2 C(111), MoC(011), VN(011), Mo 2 N(001), Mo 2 N(011), and Mo 2 N(100) surfaces. Additionally, none of the carbide and nitride catalyst surfaces are located in the optimal catalytic activity part. Therefore, it is essential to modify the catalyst via adding dopants or alloying to improve the catalytic activity. Catalytic modifications that can destabilize the surface adsorption of O*/H 2 O* and decrease the energy barriers of O-H bond formation are recommended to facilitate the HDO on the carbide and nitride catalysts. These a priori investigations provide guidelines for future low-cost HDO catalyst development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Establishing the Role of Metal, Interface, and Vacancy Sites in Pt/TiO 2 -Catalyzed Acetic Acid Hydrodeoxygenation

Catalytic hydrodeoxygenation (HDO) following catalytic fast pyrolysis (CFP) offers an approach to convert the vapor-phase product of biomass pyrolysis to a stable bio-oil product by reducing the oxygen content. Fundamental insights into the HDO of carboxylic acids, which are a corrosive and acidic CFP product, on promising catalyst materials, such as Pt/TiO 2 , are needed to inform the design of multifunctional HDO catalysts with improved carbon efficiency. In this contribution, density functional theory (DFT) calculations were used to assess the role of Pt-metal and Pt-TiO 2 -interface sites on acetic acid HDO (AA-HDO), and to determine the effect of interfacial oxygen vacancies at the Pt-TiO 2 interface, by calculating the reaction energetics for key AA-HDO surface intermediates and elementary steps on each site type. Pt-metal sites, modeled via Pt(111), preferred to form undesired decarboxylation products (CH 4 and CO 2 ), whereas Pt-TiO 2 -interface sites, modeled via an anatase-supported Pt nanowire, favored the formation of desired deoxygenation products (acetaldehyde and ethane). Interfacial-vacancy sites lowered the activation energy barrier for the first C-O bond-scission step in AA-HDO, predicted to be the rate-limiting step for AA-HDO at the Pt-TiO 2 interface in the absence of a vacancy. These atomistic insights reveal the importance of metal-metal oxide interface sites in AA-HDO selectivity and can be used to inform the rational design of improved HDO catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Basal Plane Doping to Activate Colloidal MoS 2 Nanosheets for Catalytic Hydrodeoxygenation of para- Cresol

The valorization of biomass into biofuels is a critical process for producing renewable fuels. Hydrodeoxygenation (HDO), particularly over doped molybdenum disulfide (MoS 2 ), a transition metal dichalcogenide (TMD) material, is a common representative catalytic reaction system for converting biomass-derived materials into useful hydrocarbons. However, the location and role of dopants, such as Co, in HDO is not fully understood. The effects of dopant location and oxidation state are often precluded by inhomogeneity in the ensemble properties of nanosheet size and dopant dispersion, as well as difficulty in observing the behavior of atomic site behavior directly. Using a colloidal approach to synthesize cobalt-doped MoS 2 nanosheets with controlled dopant concentration, combined with X-ray absorption spectroscopy (XAS) and density functional theory (DFT) calculations, we determine that basal plane doped Co (25% Co:Mo mole ratio) shows peak catalytic activity in HDO of para-cresol, a model biomass-derived compound, and that basal Co sites are demonstrably more active than edge sites. By observing these doping effects in MoS 2 catalysts for HDO, we can further optimize not only the production of carbon-neutral fuels but also direct the tailoring of doped TMD catalysts toward their intended applications.

36 MATERIALS SCIENCE↗