Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hydrofluoric acid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Batch and column studies of radium, actinium, thorium and protactinium on CL resin in nitric acid, hydrochloric acid and hydrofluoric acid

CL resin (TrisKem International) was characterized for separations of radium, actinium, thorium and protactinium. Batch studies are presented for radium, actinium and thorium in HCl and HNO3 as well as for radium, thorium and protactinium in HF. The uptake of thorium from dilute HNO3 (≤ 10 -4 M) and dilute HCl (≤ 10 -4 M) was found to be very high (D w > 100 in HNO 3 and > 1000 in HCl). Kinetics studies on thorium were performed in HCl and HNO 3 to determine suitably for column separations. Six column separation studies are presented including the separation of trace thorium from radium and actinium in dilute HCl and HNO 3 , the separation of radium from 1 mg 232 Th in dilute HCl, the separation of thorium and radium in the presence of HCl and excess Cl-, the separation of radium, protactinium and thorium by retention of protactinium and the separation of protactinium and thorium by retention of thorium.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Balloon-borne observations of mid-latitude hydrofluoric acid

Measurements of stratospheric hydrofluoric acid (HF) have been made by the JPL MkIV interferometer during high-altitude balloon flights. Infrared solar absorption spectra were acquired near 35 deg N at altitudes between local tropopause and 38 km. Volume mixing ratio profiles of HF derived from 4 flights (1990-93), in conjunction with simultaneously observed N2O profiles, indicate an average rate of HF increase of (5.5 +/- 0.3)% per year, in agreement with time-dependent, two-dimensional model simulations (6% per year) and ATMOS measurements.

Sen, B.↗

Intra-Arterial Calcium Gluconate Treatment After Hydrofluoric Acid Burn of the Hand

Hydrofluoric acid (HF) is a colorless corrosive acid used in different industrial branches. Exposure to HF typically results from spills, and most often the hand or fingers are involved. Tissue damage through cutaneous HF exposure occurs through corrosive burns due to the free hydrogen ions and through skin penetration of the fluoride ions, causing a depletion of calcium in the deep tissue layers, ultimately leading to cell death and tissue necrosis. Treatment of HF burns consists of thoroughly flushing the exposed area with water and applying calcium gluconate gel to the skin. If topical treatment does not suffice, subcutaneous injections, as well as intravascular-both intravenous and intra-arterial-calcium gluconate therapy, have been advocated. We report for the first time a case of HF burn of the hand and digits associated with vasospasm. Pain and vasospasm were successfully treated by repeated intra-arterial calcium gluconate injection. We conclude that intra-arterial calcium gluconate injection is a successful and well-tolerated therapy for HF burn associated with Raynaud's syndrome. Intra-arterial injection allows for well-controlled delivery of therapy as well as assessment of the vascular status.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

EXAFS Study of the Speciation of Protactinium(V) in Aqueous Hydrofluoric Acid Solutions

The speciation of protactinium(V) in hydrofluoric acid (HF) solutions was studied using X-ray absorption spectroscopy. Extended X-ray absorption fine structure measurements were performed on an aqueous solution of 0.05 M protactinium(V) with various HF concentrations ranging from 0.5 to 27 M in order to probe the protactinium coordination sphere with respect to the identity and number of coordinating ligands. The resulting fits to the spectra suggest the presence of an eight-coordinate homoleptic fluoro complex in highly concentrated fluoride solutions (27 M), with equilibrium between seven- and eight-coordinate fluoro complexes at moderate acidities, and in more dilute solutions, results indicate that one water molecule is likely to replace a fluoride in the first coordination sphere, at a distance of 2.54-2.57 angstrom. Comparisons of this chemistry with group V metals, niobium and tantalum, are presented, and the potential implications for these results on the hydrolytic behavior of protactinium in aqueous systems are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A non-aqueous sodium hexafluorophosphate-based electrolyte degradation study: Formation and mitigation of hydrofluoric acid

Fundamental characterization of battery electrolyte is crucial for rechargeable batteries. This work reports the chemical stability of sodium hexafluorophosphate (NaPF6)-based non-aqueous electrolytes containing different solvent mixtures (e.g., cyclic and acyclic carbonates) in the presence of water for Na-ion batteries. A degradation study is conducted using NaPF 6 -based electrolytes, highlighting the effect of two electrolyte additives, 2,2,2-trifluoroethoxy-2,2,2-ethoxy phosphazene (FM2) and fluoroethylene carbonate (FEC), on degradation and cell performance of full-cell Na-ion batteries. Hydrolysis of this salt in acidic condition is particularly prone to form hydrofluoric acid (HF), and can be observed in electrolytes made with battery grade carbonate solvents (<20 ppm of water). Here, degradation mechanisms of NaPF 6 -based electrolytes are studied using liquid nuclear magnetic resonance (NMR). Noticeable degradation takes place in high purity electrolytes with the presence of moisture to form HF and organophosphates in timeframes below the current shelf-life of the Na electrolytes. FEC is not efficient to protect the electrodes from being exposed to HF. On the other hand, FM2 is revealed as a “scavenger” of HF, which helps stabilize the shelf life of electrolytes that might contain or become exposed to water. Our study underscores the importance to understanding the degradation of electrolyte and improving stability toward better shelf life for sodium ion batteries.

25 ENERGY STORAGE↗

NOVEL CHARACTERIZATION OF THE ELECTROPOLISHING OF NIOBIUM WITH SULFURIC AND HYDROFLUORIC ACID MIXTURES

Niobium surfaces are commonly electropolished in an effort to obtain optimally smooth surfaces for high-field SRF cavity applications. We report the first use of controlled electrochemical analysis techniques to characterize electropolishing of Nb in a sulfuric and hydrofluoric acid electrolyte. Through the use of a reference electrode we are able to clearly distinguish the anode, cathode polarization potentials as well as the electrolyte voltage drop that sum to the applied power supply voltage. We then separate the temperature and HF concentration dependence of each. We also report the first use of Electrochemical Impedance Spectroscopy (EIS) on this system. EIS results are consistent with a presence of a compact salt film at the Nb/electrolyte interface that is responsible for the limiting current. Microscopic understanding of the basic Nb EP mechanism is expected to provide an appropriate foundation with which to optimize the preparation of high-field niobium cavity surfaces. The implication of EIS for monitoring Nb surface during electropolishing shows this technology could be potentially used as a source of on-line feedback.

36 MATERIALS SCIENCE↗

Effect of Conductivity Type and Doping Level of Silicon Crystals on the Size of Formed Pore Channels during Anodic Etching in Hydrofluoric Acid Solutions

In this paper, we discuss causes of the multidirectional effect of changes in the concentrations of free charge carriers in silicon crystals of p- and n-type conductivity on the transverse dimensions of pores formed as a result of anodic etching in hydrofluoric acid solutions, as well as the effect of anodic current density on pore size. The observed dependences are explained based on the concepts of electrochemical pore formation in semiconductor crystals as self-organizing cooperative processes accompanied by the injection of electrons from the chemical reaction region at the pore advancement front. Differences in the size of pores forming at the same current density in crystals differing in type and concentration of free charge carriers are associated with the effective temperature of the front of the cooperative chemical reaction at the bottom of germinating pores. This temperature, in turn, correlates with the power density of thermal energy released in the near-surface region of the etching crystal, either due to recombination processes for a p-type semiconductor or direct or indirect energy transfer from hot electrons to lattice vibrations in the case of a n-type semiconductor. The characteristic relaxation times of injected nonequilibrium electrons were calculated depending on the concentrations of the majority charge carriers in silicon crystals of both types of conductivity and the corresponding thicknesses of the regions of relaxation energy release. The revealed patterns of concentration changes in the power density of heat release in the near-frontal region of etching silicon crystals of p- and n-type conductivity are in good agreement with observed changes in the size of germinating pores.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis of anatase titanium dioxide nanocaps via hydrofluoric acid etching towards enhanced photocatalysis

Graphical abstract: Anatase TiO{sub 2} nanocaps prepared by HF-assisted chemical etching method exhibit enhanced photocatalytic activity compared with commercial P25 because of HF served as an etching agent to remove doped impurities. - Highlights: • Anatase TiO{sub 2} nanocaps were synthesized by HF etching process. • The optimal conditions of experiment are 700 °C calcination and 0.2 mL HF solution. • The photocatalytic properties was studied upon UV and Visible irradiation. • The unique TiO{sub 2} nanocaps structure shows excellent photocatalytic activity. - Abstract: Anatase titanium dioxide (TiO{sub 2}) nanocaps were created via a four-step process including the preparation of SiO{sub 2} spheres, the deposition of a TiO{sub 2} layer to fabricate SiO{sub 2}@TiO{sub 2} composite spheres, the calcination for obtaining the crystal structure of anatase phase, and hydrofluoric acid (HF) etching to dissolve SiO{sub 2} cores. The SiO{sub 2}@TiO{sub 2} spheres calcined at 700 °C revealed fine photocatalytic activity. Interestingly, most of samples transformed into TiO{sub 2} nanocaps via HF etching, and TiO{sub 2} nanocaps prepared using optimal conditions exhibited quick degradation (k is 0.052 min{sup −1}) compared with commercial P25 (k is 0.030 min{sup −1}) and the TiO{sub 2} nanostructures etched by a NaOH solution. The excellent photocatalytic performance is attributed to its unique hollow hemispherical nanocaps structure, which is in favor of making full use of incident light. The photocatalysis phenomenon in visible light was also observed after depositing Au nanoparticles on anantase TiO{sub 2} nanocaps.

36 MATERIALS SCIENCE↗

Alternate method of source preparation for alpha spectrometry: No electrodeposition, no hydrofluoric acid

An alternate method of preparing actinide alpha counting sources was developed in place of electrodeposition or lanthanide fluoride micro-precipitation. The method uses lanthanide hydroxide micro-precipitation to avoid the use of hazardous hydrofluoric acid. Lastly, it provides a quicker, simpler, and safer way of preparing actinide alpha counting sources in routine, production-type laboratories that process many samples daily.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Sulfuric acid-methanol electrolytes as an alternative to sulfuric-hydrofluoric acid mixtures for electropolishing of niobium

Attainment of the greatest possible interior surface smoothness is critical to meeting the performance demands placed upon niobium superconducting radiofrequency (SRF) accelerator cavities by next generation projects. Electropolishing with HF-H{sub 2}SO{sub 4} electrolytes yields cavities that meet SRF performance goals, but a less-hazardous, more environmentally-friendly process is desirable. Reported studies of EP on chemically-similar tantalum describe the use of sulfuric acid-methanol electrolytes as an HF-free alternative. Reported here are the results of experiments on niobium samples with this electrolyte. Voltammetry experiments indicate a current plateau whose voltage range expands with increasing acid concentration and decreasing temperature. Impedance spectroscopy indicates that a compact salt film is responsible for the current plateau. Equivalent findings in electropolishing chemically-similar tantalum with this electrolyte were interpreted due to as mass transfer limitation by diffusion of Ta ions away from the anode surface. We infer that a similar mechanism is at work here. Conditions were found that yield leveling and brightening comparable to that obtained with HF-H{sub 2}SO{sub 4} mixtures.

36 MATERIALS SCIENCE↗

Correlation of film density and wet etch rate in hydrofluoric acid of plasma enhanced atomic layer deposited silicon nitride

The continued scaling in transistors and memory elements has necessitated the development of atomic layer deposition (ALD) of silicon nitride (SiN{sub x}), particularly for use a low k dielectric spacer. One of the key material properties needed for SiN{sub x} films is a low wet etch rate (WER) in hydrofluoric (HF) acid. In this work, we report on the evaluation of multiple precursors for plasma enhanced atomic layer deposition (PEALD) of SiN{sub x} and evaluate the film’s WER in 100:1 dilutions of HF in H{sub 2}O. The remote plasma capability available in PEALD, enabled controlling the density of the SiN{sub x} film. Namely, prolonged plasma exposure made films denser which corresponded to lower WER in a systematic fashion. We determined that there is a strong correlation between WER and the density of the film that extends across multiple precursors, PEALD reactors, and a variety of process conditions. Limiting all steps in the deposition to a maximum temperature of 350 °C, it was shown to be possible to achieve a WER in PEALD SiN{sub x} of 6.1 Å/min, which is similar to WER of SiN{sub x} from LPCVD reactions at 850 °C.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

HYDROFLUORIC ACID SCRUBBER SYSTEMS

Each year over a million gallons of water are used to scrub hydrogen fluoride (HP) vapors from waste off-gas streams. Use of other potential scrubber solutions such as potassium hydroxide (KOH), aluminum nitrate nonahydrate (ANN), and monobasic aluminum nitrate (monoban) would result in significant volume reductions. A laboratory study was initiated to (1) demonstrate the effectiveness of these scrubber solutions to sorb HF, (2) determine if unexpected reactions occurred at flowsheet conditions, and (3) determine the consequences of deviation from flowsheet conditions. Caustic or aluminum scrubber solutions remove hydrogen fluoride from off-gas streams. Solids which appear with aluminum could be avoided by heating the scrubber solution.

99 GENERAL AND MISCELLANEOUS↗

Corrosion Behavior of Plasma-Nitrided 904L Austenitic Stainless Steel in Hydrofluoric Acid

A new type of high-chromium nickel molybdenum super austenitic stainless steel, 904L, has excellent corrosion resistance in acidic environments. However, the service life of 904L decreases significantly in a mixed acid system that includes hydrogen fluoride and sulfuric acid. In this article, different plasma nitriding processes were used to modify the surface of 904L stainless steel. X-ray diffraction was used to analyze the phase composition after nitriding; scanning electron microscopy and atomic force microscopy were used to examine the surface morphology after nitriding; electrochemical noise and electrochemical methods were used to study the localized corrosion behavior and the damage mechanism of the ion nitride layer; and the effect of the plasma nitride layer on the corrosion resistance was explored. The results show that with increasing nitriding time, the thickness of the nitride layer increased. Ion nitriding resulted in the coarsening of the 904L austenitic stainless steel surface. A long nitriding treatment time resulted in the precipitation of CrN in the modified layer, depleting the chromium from the matrix and remarkably reducing the corrosion resistance.

36 MATERIALS SCIENCE↗

±Characterization of Group V Dubnium Homologs on DGA Extraction Chromatography Resin from Nitric and Hydrofluoric Acid Matrices and Initial Investigation of Element 114 Homolog Ge

Studies of the chemical properties of superheavy elements (SHE) pose interesting challenges due to their short half-lives and low production rates. Chemical systems must have extremely fast kinetics, fast enough kinetics to be able to examine the chemical properties of interest before the SHE decays to another nuclide. To achieve chemistry on such time scales, the chemical system must also be easily automated. Most importantly however, a chemical system must be developed which provides suitable separation and kinetics before an on-line study of a SHE can be performed. Relativistic effects make studying the chemical properties of SHEs interesting due to the impact these effects could have on the SHEs chemical properties. Relativistic effects arise when the velocity of the s orbital electrons approach the speed of light. As this velocity increases, the Bohr radius of the inner electron orbitals decreases and there is an increase in the particles mass. This contraction results in a destabilization of the energy of the outer d and f electron orbitals (5f and 6d in the case of SHE), which can cause these to expand due to their increased shielding from the nuclear charge. Another relativistic effect is the spin-orbit splitting for p, d, and f orbitals into j = 1 1/2 states. This can lead most interestingly to a possible increased stability of element 114, which due to large spin-orbit splitting of the 7p orbital and the relativistically stabilized 7p 1/2 and 7s orbital gives rise to a closed shell ground state of 7s 2 7p 1/2 2 . The homologs of element 105, dubnium (Db), Ta and Nb and the pseudo-homolog Pa, are well known to hydrolyze and form both neutral and non-neutral monoatomic and polyatomic species that may cause issues with extraction from a given chemical system. Early ion-exchange and solvent-extraction studies show mixed results for the behavior of Db. Some studies show Db behaving most similar to Ta, while others show it behaving somewhere between Nb and Pa. Much more recent studies have examined the properties of Db from HNO 3 /HF matrices, and suggest Db forms complexes similar to those of Pa. Very little experimental work into the behavior of element 114 has been performed. Thermochromatography experiments of three atoms of element 114 indicate that the element 114 is at least as volatile as Hg, At, and element 112. Lead was shown to deposit on gold at temperatures about 1000 C higher than the atoms of element 114. Results indicate a substantially increased stability of element 114. No liquid phase studies of element 114 or its homologs (Pb, Sn, Ge) or pseudo-homologs (Hg, Cd) have been performed. Theoretical predictions indicate that element 114 is should have a much more stable +2 oxidation state and neutral state than Pb, which would result in element 114 being less reactive and less metallic than Pb. The relativistic effects on the 7p 1/2 electrons are predicted to cause a diagonal relationship to be introduced into the periodic table. Therefore, 114 2+ is expected to behave as if it were somewhere between Hg 2+ , Cd 2+ , and Pb 2+ . In this work two commercially available extraction chromatography resins are evaluated, one for the separation of Db homologs and pseudo?homologs from each other as well as from potential interfering elements such as Group IV Rf homologs and actinides, and the other for separation of element 114 homologs. One resin, Eichrom's DGA resin, contains a N,N,N',N'-tetra-n-octyldiglycolamide extractant, which separates analytes based on both size and charge characteristics of the solvated metal species, coated on an inert support. The DGA resin was examined for Db chemical systems, and shows a high degree of selectivity for tri-, tetra-, and hexavalent metal ions in multiple acid matrices with fast kinetics. The other resin, Eichrom's Pb resin, contains a di-t-butylcyclohexano 18-crown-6 extractant with isodecanol solvent, which separates analytes based on steric interactions between the cavity of the crown ether and electrostatic interactions between the oxygen's of the ether and cations in the mobile phase. This particular resin has been shown to have an extremely high uptake affinity for Pb, a direct homolog of element 114, and is thus a good initial extractant to examine for a potential element 114 chemical system. Figure 1.1 shows the respective extractant molecules from the DGA and Pb resins. Batch uptake experiments were conducted to examine the uptake behavior of Ta on the DGA resin. Batch uptake experiments were also conducted to examine the uptake behavior of Ge on the Pb resin. Column experiments were designed based on batch uptake experiments of Ta, Am, Pa, Np, Zr, and Nb to establish a sequential extraction of Group IV/V homologs as well as Am for potential use as a Db chemical system.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗