Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hydroformylation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Aliphatic Amines from Waste Polyolefins by Tandem Pyrolysis, Hydroformylation, and Reductive Amination

Pyrolysis of waste plastics can produce a product mixture with a high concentration of olefins (>50 wt%). The olefins, as building blocks in the petroleum industry, are potential precursors for valuable commodity chemicals with higher values (>$2000 per ton). In this work, we produce aldehydes by hydroformylation of the olefins present in pyrolysis oil from colored post-consumer recycled high-density polyethylene (PCR-HDPE). The obtained aldehydes in the oil are then converted into aliphatic amines via reductive amination with a Ru/C catalyst. The aminated oil was characterized by multiple analytical chemistry techniques including elemental analysis, nuclear magnetic resonance spectroscopy, high-resolution liquid chromatography-mass spectrometry, and gas chromatography-mass spectrometry with a Polyarc flame ionization detector. The concentration of metals in the PCR-HDPE and oil changes during the tandem processes, showing limited effects of these elements (e.g., Al, Ca, Fe, Mg, Ti, Zn) on hydroformylation and reductive amination. Additionally, we demonstrated that reductive amination of aldehydes with varied carbon numbers and branching properties can be achieved in the presence of a complex mixture, including paraffins and aromatics. The results indicate that waste plastics have the potential to serve as a renewable source for mono and di aliphatic amines, thereby diminishing reliance on fossil feedstocks as the current primary amine source.

aliphatic amines↗
DOE OSTI2022

Heterogeneous hydroformylation of alkenes by Rh-based catalysts

Heterogeneously catalyzed hydroformylation reactions avert the problems of separation in homogeneous reactions, reduce the discharge of phosphorus-containing wastes, and prevent the loss of precious metals. This review summarizes the developments of catalysts for heterogeneous hydroformylation in the last decade and proposes potential modification methods for future improvements. The hydroformylation properties of different reactants are compared in order to emphasize the fact that various olefins face unique challenges. The hydroformylation of ethylene requires the enhancement of catalytic activity and chemoselectivity, whereas that of propylene needs improvements in both chemoselectivity and regioselectivity. The hydroformylation of longer-chain olefins and styrene seeks further improvement in regioselectivity. The catalytic properties of activity, selectivity, and stability can be tuned through electronic effects (bimetallic effects, phosphine ligands, and single-atom catalysts), steric hindrance (encapsulation structures, diphosphine ligands, and local functional groups), and reaction condition optimization (temperature, pressure, and solvents). Furthermore, the understanding of these effects is critical in future catalyst design for heterogeneous hydroformylation reactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Reusable Catalysts for Hydroformylation‐Based Reactions

Abstract Catalytic hydroformylation is an important reaction, widely studied by academics and applied in the chemical industry, and it is a paradigmatic example of a chemical reaction that is aligned with most of the Green Chemistry principles. In the last years, the global requirement for more sustainable chemical processes has boosted the development of more active, selective, and reusable hydroformylation catalysts. In this review, we highlight the most recent advances regarding the creation and expansion of reusable catalysts for hydroformylation and sequential processes that use hydroformylation as central reaction. The most relevant strategies for immobilization of hydroformylation catalysts are discussed, along with a critical analysis of their application in synthesis, based on catalytic activity, selectivity, and reusability.

Rodrigues, Fábio M. S.↗
DOE OSTI2025

Support modification by phosphonic acid ligands controls ethylene hydroformylation on single-atom rhodium sites

To investigate the ability of surface-bound ligands to control activity toward ethylene hydroformylation, we modified site-isolated Rh 1 /TiO 2 with a series of substituted benzyl phosphonic acids. We found that modification of the support by phosphonic acids reduced break-in times for hydroformylation by 4× and increased absolute hydroformylation activity by up to 18× compared to unmodified catalyst at 150 °C. All functionalized catalysts improved hydroformylation activity by at least 9× and improved selectivity by between 7× and 60× relative to the unmodified catalyst. Carbon monoxide probe–molecule spectroscopy indicated that the enhancements in activity among modified samples were due to changes in the local environment of the active Rh site. Specifically, the bite angle of adsorbed carbon monoxide, as determined from infrared spectra, correlated with hydroformylation activity. These findings demonstrate that Rh 1 active sites are highly sensitive to modification of the support with organic ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Influence of support on Rh-Co bimetallic catalysts for ethylene hydroformylation

Bimetallic Rh- and Co-based catalysts are promising materials for the heterogenous ethylene hydroformylation reaction. Here, in this study, the influence of a mesoporous silica (SBA-15) support on Rh and Co bimetallic interactions was investigated through a comparison with silica gel and alumina supports. The bimetallic catalyst supported on mesoporous silica (RhCo 3 /SBA-15) showed the best C 3 oxygenate yield among the three bimetallic catalysts. In-situ vibrational studies suggested moderate binding of the gem-dicarbonyl and Rh(CO)(C 2 H 4 ) intermediates due to this bimetallic interaction that led to improved hydroformylation performance. Kinetic studies revealed a lower hydroformylation barrier for the bimetallic compared to a Rh monometallic catalyst, and in-situ X-ray absorption spectroscopy investigations showed clear Rh-Co alloy formation on RhCo 3 /SBA-15. The bimetallic enhancement effect from the interaction with the mesoporous silica support shown here can be further optimized to design olefin hydroformylation catalysts.

58 GEOSCIENCES↗
DOE OSTI2021

Comparison of Heterogeneous Hydroformylation of Ethylene and Propylene over RhCo 3 /MCM-41 Catalysts

The reaction mechanisms of heterogenous hydroformylation of ethylene and propylene were compared at 413-453 K using RhCo 3 /MCM-41 as catalysts. The reaction rates of propylene for both hydroformylation and the undesired side reaction of hydrogenation were found to be about one order of magnitude lower than those for ethylene in flow reactor studies. The difference in the kinetic behavior between ethylene and propylene was investigated by measuring the reaction orders and apparent activation energies, and these macro-kinetic observables were analyzed using the degree of rate control (DRC) method. In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) experiments were performed to characterize the surface intermediates formed during the reactions. When the reactant was changed from ethylene to propylene, the IR peak corresponding to adsorbed CO exhibited a significant increase, while the IR peaks of alkyl group decreased in magnitude. Combined with the DRIFTS results, DRC analysis indicates that the first step of olefin hydroformylation, the formation of an alkyl group on the catalyst surface, plays a key role in the difference between ethylene and propylene. This step is kinetically non-relevant when ethylene is the reactant, but it is one of the rate-controlling steps for propylene. Furthermore, the low concentration of the adsorbed propyl group, which is a common intermediate shared by both hydroformylation and hydrogenation of propylene, decreases the rates of both reaction pathways as compared to ethylene.

10 SYNTHETIC FUELS↗
DOE OSTI2022

Catalytic Tandem CO 2 –Ethane Reactions and Hydroformylation for C3 Oxygenate Production

The strategy of tandem hydroformylation reaction for C3 oxygenate production from CO 2 and ethane represents an opportunity of simultaneously upgrading greenhouse gas CO 2 and the large-reserved shale gas into value-added liquid products. One of the challenges is how to tune and achieve the appropriate ethylene/CO/H 2 ratios for the downstream hydroformylation. Herein, the desired ethylene/CO/H 2 ratios were analyzed and identified by considering different combinations of main and side-reactions of CO 2 and ethane, based on which the PtSn 3 /γ-Al 2 O 3 catalyst was identified as promising to enable the catalytic tandem hydroformylation reaction. Further, the combined studies of reactor evaluation, in situ and ex situ characterization and theoretical calculations revealed that the Pt cluster/SnO x interfacial structures dominated the simultaneous dehydrogenation and dry reforming of ethane, thereby allowing the co-formation of ethylene, CO and H 2 that were subsequently converted to C3 oxygenates in the tandem hydroformylation reactor. The current work not only demonstrates the design principles of suitable catalysts for the tandem-reactor strategy, but also highlights the utilization of CO 2 and shale gas to produce value-added oxygenate products.

03 NATURAL GAS↗
DOE OSTI2025

Controlling Reaction Pathways of Ethylene Hydroformylation Using Isolated Bimetallic Rhodium–Cobalt Sites

Designing efficient ligand-free heterogeneous catalysts for ethylene hydroformylation to produce C 3 oxygenates is of importance for both fundamental research and practical applications, but it is often hindered by insufficient catalytic activity and selectivity. Here, this work designs isolated rhodium–cobalt (Rh–Co) sites confined within a ZSM-5 zeolite to enhance ethylene hydroformylation rates and selectivity while maintaining catalyst stability. By adjusting the Co/Al ratio in Co-ZSM-5, different sizes of Co are formed; subsequent Rh introduction produces isolated Rh 1 Co x clusters with different Rh–Co coordination numbers (CNs). In-situ characterizations and density functional theory calculations reveal that a Rh–Co CN of 3, corresponding to an isolated Rh 1 Co 3 site, provides optimal bindings to reaction intermediates and thus achieves the highest hydroformylation rates among supported Rh-based catalysts. This study demonstrates the role of coordination-tuning via a secondary metal in effectively controlling the reaction pathway over single Rh atom catalysts.

03 NATURAL GAS↗
DOE OSTI2022

Force-Modulated Selectivity of the Rhodium-Catalyzed Hydroformylation of 1-Alkenes

Here we quantify the regio- chemo-, and enantioselectivity of the hydroformylation of 1-alkenes catalyzed by Rh(I) complexes containing chiral macrocyclic biaryl bis(phosphine) ligands as a function of mechanical force applied to the biaryl backbone of these ligands. Extension forces increase the regioselectivity of the hydroformylation of 1-octene from l:b = 1.2 to 1.9 and decrease the chemoselectivity for C 9 aldehyde relative to 2-octene from 96% to 20% across a ~230 pN change in applied force. Extension forces decrease the enantioselectivity of the hydroformylation of styrene from 28% to 18% ee across a similar force range. Variable temperature 1 H and 31 P NMR analysis of five-coordinate rhodium complexes of the form (P–P)Rh(CO) 2 H established structures in which the bisphosphine ligand occupies one equatorial and one apical position in the trigonal bipyramid with rapid interconversion of the equatorial and apical phosphorus atoms ($ΔG^‡_{223 \text{K}}$ = 9.6–9.9 kcal/mol). Neither the isomeric composition nor fluxional behavior of these complexes was detectably perturbed across a ~300 pN change in applied force.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Unraveling the Structural Sensitivity of Metal Catalysts in Ethylene Hydroformylation: Insights from Theory and Experiments

Here, in this study, we combined experimental and theoretical methods to investigate the structural sensitivity of metal catalysts in the ethylene hydroformylation reaction. Among Rh, Pt, Ir, Ni, Au, Ag, Pd, and Cu catalysts studied using experimental and theoretical methods, Rh showed the highest selectivity toward the C-C coupling product from CO and C 2 H 5 (i.e., C 2 H 5 CHO). The results from DFT and microkinetic simulations revealed that the activation energy barrier for C-C coupling is lowest on the Rh nanocluster, which explains the experimentally observed highest C 2 H 5 CHO selectivity on the Rh catalyst. Furthermore, DFT results demonstrated that the sites located on the flat surfaces of nanoparticles primarily promote the hydrogenation reaction, leading to the formation of undesired C 2 H 6 . In contrast, undercoordinated edge and corner sites of the nanocluster promote the C-C coupling reaction. Thus, our results illustrate that the selectivity toward C 3 oxygenates in ethylene hydroformylation reaction can be steered by tuning the size of Rh nanoparticles (the best-performing catalyst) to optimize the active (edge and corner) sites that preferentially promote the C-C coupling reaction.

58 GEOSCIENCES↗
DOE OSTI2023

Low-temperature hydroformylation of ethylene by phosphorous stabilized Rh sites in a one-pot synthesized Rh-(O)-P-MFI zeolite

Zeolites containing Rh single sites stabilized by phosphorous were prepared through a one-pot synthesis method and are shown to have superior activity and selectivity for ethylene hydroformylation at low temperature (50°C). Catalytic activity is ascribed to confined Rh 2 O 3 clusters in the zeolite which evolve under reaction conditions into single Rh 3+ sites. These Rh 3+ sites are effectively stabilized in a Rh-(O)-P structure by using tetraethylphosphonium hydroxide as a template, which generates in situ phosphate species after H 2 activation. In contrast to Rh 2 O 3 , confined Rh0 clusters appear less active in propanal production and ultimately transform into Rh(I)(CO) 2 under similar reaction conditions. As a result, we show that it is possible to reduce the temperature of ethylene hydroformylation with a solid catalyst down to 50°C, with good activity and high selectivity, by controlling the electronic and morphological properties of Rh species and the reaction conditions.

Catalysis↗
DOE OSTI2022

Trends and descriptors of heterogeneous hydroformylation activity and selectivity of RhM 3 (M = Fe, Co, Ni, Cu and Zn) catalysts

Here monometallic Rh/MCM-41 and bimetallic RhM 3 /MCM-41 (M = Fe, Co, Ni, Cu, or Zn) catalysts are synthesized and tested for vapor-phase ethylene hydroformylation reaction. Co is found to exhibit a significant promotion effect on the selectivity of hydroformylation to C 3 oxygenates, followed by Fe and Cu, with Ni and Zn showing a negative effect. DFT calculations reveal that the addition of a secondary metal can provide a new type of site, being able to selectively tune the binding energies of reaction intermediates, and thus lead to different catalytic performances.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2025

Multimetallic Metal-Organic Frameworks as Heterogeneous Catalysts for Gas Phase Hydroformylation and Hydrogenation Reactions

This project focused on the development bimetallic metal-organic frameworks (MOFs) as gas phase heterogeneous catalysts for hydrogenation and hydroformylation reactions. MOFs are a new class of hybrid inorganic/organic materials that are highly crystalline, with structures consisting of metal nodes of specific geometries connected by organic linkers. Although there have been a number of studies of catalysis at MOF nodes in solution, there is little experimental data in the literature for gas phase reactions despite the fact that industrial heterogeneous catalysis on MOFs is more economically viable than homogeneous catalysis. The use of MOFs as heterogeneous catalysts presents the unique opportunity to carefully control the composition, geometry and ensemble sizes of the active sites, which are all critical factors for the rational design of new catalysts. Specific objectives of the project are as follows: (1) to tailor the geometry, composition and ensemble size of the active sites; (2) to understand how the adsorption of molecules at metal sites can be modified by interactions with a neighboring metal site; (3) to determine how oxidation states of the metal change during reaction and how these states can be modified by metal-metal electronic interactions; and (4) to elucidate reaction mechanisms and intermediates. For these studies, we have chosen to investigate selective hydrogenation of hydrocarbons and hydroformylation, which are industrially relevant reactions. Our interdisciplinary team of Chen, Shustova and Vogiatzis/Henkelman provides critical expertise in novel MOF synthesis (Shustova), atomic-scale surface science and catalysis (Chen) and computational studies of reaction mechanisms (Vogiatzis/Henkelman) that are necessary for the development of these catalysts. We believe that this work will lead directly to the rational design of new catalysts that are versatile, highly active/selective and suitable for industrial processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Cationic Cobalt(II) Bisphosphine Hydroformylation Catalysis: In Situ Spectroscopic and Reaction Studies

[HCo(CO) x (bisphosphine)](BF 4 ), x = 1–3, is a highly active hydroformylation catalyst system, especially for internal branched alkenes. In situ infrared spectroscopy (IR), electron paramagnetic resonance (EPR), and nuclear magnetic resonance studies support the proposed catalyst formulation. IR studies reveal the formation of a dicationic Co(I) paramagnetic CO-bridged dimer, [Co 2 (μ-CO) 2 (CO)(bisphosphine) 2 ] 2+ , at lower temperatures formed from the reaction of two catalyst complexes via the elimination of H 2 . Here, DFT studies indicate a dimer structure with square-pyramidal and tetrahedral cobalt centers. This monomer–dimer equilibrium is analogous to that seen for HCo(CO) 4 , reacting to eliminate H 2 and form Co 2 (CO) 8 . EPR studies on the catalyst show a high-spin (S = 3/2) Co(II) complex. Reaction studies are presented that support the cationic Co(II) bisphosphine catalyst as the catalyst species present in this system and minimize the possible role of neutral Co(I) species, HCo(CO) 4 or HCo(CO) 3 (phosphine), as catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Hydroformylation of pyrolysis oils to aldehydes and alcohols from polyolefin waste

Waste plastics are an abundant feedstock for the production of renewable chemicals. Pyrolysis of waste plastics produces pyrolysis oils with high concentrations of olefins (>50 weight %). The traditional petrochemical industry uses several energy-intensive steps to produce olefins from fossil feedstocks such as naphtha, natural gas, and crude oil. In this work, we demonstrate that pyrolysis oil can be used to produce aldehydes through hydroformylation, taking advantage of the olefin functionality. These aldehydes can then be reduced to mono- and dialcohols, oxidized to mono- and dicarboxylic acids, or aminated to mono- and diamines by using homogeneous and heterogeneous catalysis. This route produces high-value oxygenated chemicals from low-value postconsumer recycled polyethylene. Here, we project that the chemicals produced by this route could lower greenhouse gas emissions ~60% compared with their production through petroleum feedstocks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗