Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hydrogen coverage”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Critical Hydrogen Coverage Effect on the Hydrogenation of Ethylene Catalyzed by δ-MoC(001): An Ab Initio Thermodynamic and Kinetic Study

Highly selective oxidation of methane to methanol has long been challenging in catalysis. Here, we reveal key steps for the promotion by water when tuning the selectivity of a well-defined CeO 2 /Cu 2 O/Cu(111) catalyst from CO and CO 2 to methanol under a reaction environment with methane, oxygen, and water. Ambient-pressure x-ray photoelectron spectroscopy showed that water added to CH 4 and O 2 led to surface CH 3 O and accelerated methanol production. These results were consistent with density functional theory calculations and kinetic Monte Carlo simulations which showed that water preferentially dissociates over the active Ce ions at the CeO 2 -Cu 2 O/Cu(111) interface. The adsorbed OH blocked O-O bond cleavage that would dehydrogenate CH 3 O to CO and CO 2 , and it directly converted this species to methanol, while O 2 now reoxidized the reduced surface. Water adsorption also displaced the produced methanol into the gas phase.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High hydrogen coverage on graphene via low temperature plasma with applied magnetic field

The chemical functionalization of two-dimensional materials is an effective method for tailoring their chemical and electronic properties with encouraging applications in energy, catalysis, and electronics. One exemplary 2D material with remarkable properties, graphene, can be exploited for hydrogen storage and large on/off ratio devices by hydrogen termination. In this work, we describe a promising plasma-based method to provide high hydrogen coverage on graphene. A low pressure (~10 mtorr) discharge generates a fine-tunable low-temperature hydrogen-rich plasma in the applied radial electric and axial magnetic fields. Post-run characterization of these samples using Raman spectroscopy and X-ray photoelectron spectroscopy demonstrates a higher hydrogen coverage, 35.8%, than the previously reported results using plasmas. Plasma measurements indicate that with the applied magnetic field, the density of hydrogen atoms can be more than 10 times larger than the density without the magnetic field. With the applied electric field directed away from the graphene substrate, the flux of plasma ions towards this substrate and the ion energy are insufficient to cause measurable damage to the treated 2D material. As a result, the low damage allows a relatively long treatment time of the graphene samples that contributes to the high coverage obtained in these experiments.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Coverage, repulsion, and reactivity of hydrogen on High-Entropy alloys

Modeling hydrogen evolution reaction (HER) activity probability on IrPdPtRhRu(1 1 1) high-entropy alloys. Determining hydrogen coverages based on ligand effects and generalized hydrogen–hydrogen repulsion. The rate of H 2 formation is highly impacted by the level of hydrogen coverage on the catalyst surface. In search of optimal catalytic properties high-entropy alloys (HEA) are promising candidates that utilize the compositional space of multiple elements. Based on simulations of HEA model (1 1 1) surfaces with a range of hydrogen coverages, distributions of binding energies are used to construct a framework that approximates the probability that adsorbed hydrogen may lead to the formation of H 2 as a function of applied potential. By optimizing the alloy compositions for the highest activity probability at given potentials the best and most efficient catalyst candidates for HER can be identified. Treating hydrogen–hydrogen repulsion effects and binding energy separately, we find that the repulsion is larger for HEAs than for pure metals. Differing isotherm slopes in the mean adsorption and desorption energies demonstrate a possible hysteresis for hydrogen adsorption on HEAs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Ethylene Hydrogenation Molecular Mechanism on MoC y Nanoparticles

Ethylene hydrogenation catalyzed by MoC y nanoparticles has been studied by means of density functional theory methods and several models. These include MetCar (Mo 8 C 12 ), Nanocube (Mo 14 C 13 ), and Mo 12 C 12 nanoparticles as representatives of experimental MoC y nanostructures. The effect of hydrogen coverage has been studied in detail by considering low-, intermediate-, and high-hydrogen regimes. The calculated enthalpy and energy barriers show that ethylene hydrogenation is feasible on the MetCar, Mo 12 C 12 , and Nanocube but at low, medium, and high hydrogen coverages, respectively. An additional step, related to the H* migration from a Mo to a C site in the nanoparticle, has been found to be the key to establishing the best hydrogenation system. In most cases, the reactions are exothermic, featuring low hydrogenation energy barriers, especially for the Nanocube at high hydrogen coverage. In addition, the calculated adsorption Gibbs free energy shows that, for this system, the C 2 H 4 adsorption is feasible in the 300–400 K temperature range and pressures from 10 –10 to 2 atm. For the hydrogenation steps, calculated transition state theory rates show that the overall process is limited by the first hydrogenation step (C 2 H 4 → C 2 H 5 ) at temperatures of 330–400 K. However, at the lower temperatures of 300–320 K, the reaction rates are comparable for the two steps. The present results indicate that the Mo 14 C 13 Nanocube models of MoC y nanoparticles exhibit appropriate thermodynamic and kinetic features to catalyze ethylene hydrogenation at a high-hydrogen-coverage regime. The present findings provide a basis for understanding the chemistry of active MoC y catalysts, suggest appropriate working conditions for the reaction to proceed, and provide a basis for future experimental studies.

03 NATURAL GAS↗
DOE OSTI2021

A first-principles study of hydrogen surface coverage on δ-Pu (100), (111), and (110) surfaces

Hydriding corrosion of plutonium leads to surface cracking, pitting, and ultimately structural failure. Laboratory experiments demonstrate that hydriding begins on the surface or near the subsurface of plutonium. However, there has not yet been a systematic evaluation of hydrogen surface coverage on plutonium. In this work, we compute the surface energies of the low facet surfaces of face-centered cubic δ-Pu. The adsorption free energies of expected hydrogen structures at low and high coverage are presented along with the likely progression for filling sites as the H 2 partial pressure increases. Implications for near-equilibrium pressure hydride nucleation and non-equilibrium millibar pressure hydriding are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Synergic Effects of Surface Chemistry and Applied Potentials on the Kinetics of the Electrocatalytic Oxygen Evolution Reaction in IrO 2

Improving the efficacy of the oxygen evolution reaction (OER) through water oxidation is critical for advancing photoelectrochemical water splitting. Among the catalysts, IrO 2 exhibits a high OER catalytic activity and stability under acidic conditions. The OER mechanism in this system has been a topic of intense research; however, many mechanistic understandings are lacking. In this work, we carried out first-principles calculations with an implicit solvation model at a constant potential to study the OER behavior on the IrO 2 (110) surface. We find that the surface hydrogen coverage has a significant effect on OER kinetics and transition states. We then develop a microkinetics model that accounts for the continuous evolution of both OER activation energy and hydrogen coverage as a function of an applied potential. We show that this inclusion leads to significant improvement in the simulated Tafel plot compared to available experiments. In conclusion, our results point to a complex interplay between surface chemistry and the applied potential on OER kinetics.

08 HYDROGEN↗
DOE OSTI2024

Fine-tuning catalytic selectivity by modulating catalyst-environment interactions: CO 2 hydrogenation over Pd-based catalysts

Capturing catalytic behaviors under operational conditions is pivotal to gaining a mechanistic understanding and promoting the design of robust catalysts. The challenge lies in the difficulty of monitoring real-time surface dynamics driven by catalyst-environment interactions. Here, in this work, we introduce a framework based on density functional calculations and kinetic modeling. This framework significantly improves the accuracy of theoretical models’ descriptions of experimental observations by quantifying environmental impacts on surface phases and active sites. CO 2 hydrogenation over Pd-based catalysts is taken as a showcase. The observed selectivity variations of Pd and Pd-M bimetallic catalysts strongly correlate with hydrogen coverage maintained under typical CO 2 hydrogenation conditions. By reducing the amount of surface hydrogen, the selectivity tuned effectively from formic acid toward CO and methanol. This study not only deepens the comprehension of dynamics of active sites under active chemical conditions but also introduces an alternative opportunity for catalytic tuning by modulating catalyst-environment interactions.

03 NATURAL GAS↗
DOE OSTI2023

Understanding hydrogen pressure control of furfural hydrogenation selectivity on a Pd(1 1 1) model catalyst

We investigate the postulate that hydrogen pressure influences the furfural hydrogenation selectivity on palladium to form decarbonylation products at low hydrogen pressures, but 2-methyl furan at higher pressures. This change is caused by co-adsorbed hydrogen changing the orientation of adsorbed furfural; low hydrogen coverages favor flat-lying furfural, higher coverages form tilted species. This was tested for hydrogenation of furfural on a Pd(1 1 1) single crystal. The product distribution agreed with the postulate, with 100% selectivity to furan and tetrahydrofuran for low hydrogen pressures, with 2-methyl furan increasing with hydrogen pressure. The origin of the effect is explored using reflection–absorption infrared spectroscopy. This showed that co-adsorbed hydrogen influenced the orientation in a way predicted by theory. It was also found that other co-adsorbates displayed similar effects implying that a range of molecules in the reaction mixture could have significant effects on the furfural selectivity.

09 BIOMASS FUELS↗
DOE OSTI2020

Excited states in hydrogenated single-layer MoS 2

Abstract Our calculations of the excitation spectrum of single-layer MoS 2 at several hydrogen coverages, using a density-matrix based time-dependent density-functional theory (TDDFT) show that the fully hydrogenated system is metallic, while at lower coverages the spectrum consists of spin-polarized partially filled localized mid-gap states. The calculated absorption spectrum of the system reveals standard excitonic peaks corresponding to the bound valence-band hole and conduction-band electron, as well as excitonic peaks that involve the mid-gap states. Binding energies of the excitons of the hydrogenated system are found to be relatively large (few tens of meV), making their experimental detection facile and suggesting hydrogenation as a knob for tuning the optical properties of single-layer MoS 2 . Importantly, we find hydrogenation to suppress visible light photoluminescence, in agreement with experimental observations. In contrast, both Li and Na atoms transform the system into an n-doped non-magnetic semiconductor that does not allow excitonic states.

Physics↗
DOE OSTI2026

Hydrogen Adsorption over Transition Metals in Water

The adsorption free energy of atomic hydrogen on Pt(111), Pd(111), Ni(111), Ru(0001), Cu(111), and Rh(111) in liquid water was computed using a quantum mechanical/molecular mechanical free-energy perturbation scheme. The Pt(111) computations indicate that the solvent effect on H adsorption on atop sites (+0.20 eV) is almost twice that on fcc (+0.12 eV), showing it is less likely to find adsorbed hydrogen in atop position in the presence of water than in the gas phase. The solvent effect for the fcc site, which is the most favorable site for adsorbed H on Pt(111), agrees qualitatively with experimental work by Lercher et al., who reported an effect of +0.2 eV. Overall, an endergonic solvent effect for hydrogen adsorption is observed for all metals, indicating a lower hydrogen coverage relative to free site coverage at metal-water interfaces compared to metal-gas interfaces, even when hydrogen transport effects through the fluid phase are negligible; a result with important implications for (de)hydrogenation catalysis.

Zare, Mehdi↗
DOE OSTI2022

Electronic modulation of metal-support interactions improves polypropylene hydrogenolysis over ruthenium catalysts

Abstract Ruthenium (Ru) is the one of the most promising catalysts for polyolefin hydrogenolysis. Its performance varies widely with the support, but the reasons remain unknown. Here, we introduce a simple synthetic strategy (using ammonia as a modulator) to tune metal-support interactions and apply it to Ru deposited on titania (TiO 2 ). We demonstrate that combining deuterium nuclear magnetic resonance spectroscopy with temperature variation and density functional theory can reveal the complex nature, binding strength, and H amount. H 2 activation occurs heterolytically, leading to a hydride on Ru, an H + on the nearest oxygen, and a partially positively charged Ru. This leads to partial reduction of TiO 2 and high coverages of H for spillover, showcasing a threefold increase in hydrogenolysis rates. This result points to the key role of the surface hydrogen coverage in improving hydrogenolysis catalyst performance.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Uncovering the True Active Sites in Ni–N–C Catalysts for CO 2 Electroreduction

Understanding and designing active sites in single-atom catalysts (SACs) requires going beyond static models to capture their dynamic evolution under realistic electrochemical conditions. Here, in this work, we develop an integrated theoretical framework that accounts for operational conditions, by combining grand canonical density functional theory (GC-DFT) with machine-learning-accelerated sampling, to uncover structure–activity–stability relationships in Ni–N–C SACs for the CO 2 reduction reaction (CO 2 RR). A library of NiN x C 4–x (x = 0–4) motifs─representing coordination defects likely formed during high-temperature synthesis─was systematically evaluated. Under working conditions, these sites were found to undergo hydrogenation, and NiN 3 C 1_ H 1 was identified as the most probable active site. At reducing potentials, hydrogen adsorbs spontaneously at C–Ni bridge sites rather than Ni top sites, while subsurface hydrogen facilitates bent CO 2 adsorption crucial for activation. High CO 2 RR selectivity toward CO arises from site separation: Ni centers drive CO2RR, while the hydrogen evolution reaction (HER) occurs at the C–Ni bridge or N sites and from thermodynamic suppression of HER at moderate hydrogen coverage. At more negative potentials, a shift in the CO 2 RR rate-determining process (RDP) and Ni out-of-surface displacement induced by coadsorption of H and H 2 O jointly reduce activity and selectivity. Thus, both the high CO2RR selectivity of Ni–N–C catalysts and its reversal with more negative potentials can be rationalized by accounting for hydrogenated surfaces. This highlights the necessity of modeling realistic; in situ conditions. This framework provides generalizable insights into the dynamic behavior of active sites in SACs, offering guidance for the rational design of active and robust catalysts for a wide range of electrochemical reactions.

25 ENERGY STORAGE↗
DOE OSTI2021

Pushing Cu uphill of the volcano curve: Impact of a WC support on the catalytic activity of copper toward the hydrogen evolution reaction

Here, the adsorption of atomic H and H 2 on copper mono- and submonolayers supported on hexagonal WC(0001) surfaces has been investigated using density functional theory with the Perdew–Burke–Ernzerhof exchange correlation functional and D2 van der Waals corrections. Results evidence the impact of the termination of the carbide substrate on fundamental properties of Cu adatoms, and, hence, on the stability of molecular and atomic hydrogen, defining copper's catalytic activity for hydrogen evolution reaction. Using H adsorption energy as a descriptor, catalytic activity of Cu adlayers for hydrogen evolution reaction was estimated using traditional volcano curves and a curve, obtained at low hydrogen coverage. Obtained results evidence that copper adlayers supported on the WC may present a viable low-cost alternative to noble metal-based catalysts, with improved catalytic activity compared to that of copper. This, potentially, can be a useful basis for designing and developing novel functional materials with predetermined catalytic properties.

08 HYDROGEN↗
DOE OSTI2024

Atomic-Scale Visualization of Surface Segregation and Ordering of Pt in a Dilute Cu(Pt) Alloy under a Hydrogen Atmosphere

Surface segregation is a common phenomenon in alloys exposed to reactive atmospheres, yet the atomic mechanisms underlying surface structure and composition dynamics remain largely unexplored. Using a combination of environmental transmission electron microscopy observations and atomistic modeling, here we report the surface segregation process of Pt atoms in a dilute Pt(Cu) alloy and determine the distribution of Pt atoms at both atomically flat and stepped surfaces of the Pt(Cu) alloy at elevated temperatures and in a hydrogen gas atmosphere. Through directly probing Pt segregation, we find that Pt atoms segregated on the (100) surface exhibit a p(2 × 2) ordering, with ~25% Pt occupancy. In contrast, on the stepped (410) surface, hydrogen adsorption induces Pt segregation, initially occurring at the step edges, which then expands to the terrace sites upon increased hydrogen coverage, resulting in an ordered distribution of segregated Pt atoms with ~22% occupancy. Finally, these observations offer mechanistic insights into the structure and composition dynamics of the topmost atomic layer of the alloy in response to environmental stimuli and hold practical implications for the design and optimization of catalysts based on Pt group metals.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Unravelling the origin of reaction-driven aggregation and fragmentation of atomically dispersed Pt catalyst on ceria support

Metal–support interaction plays a crucial role in governing the stability and activity of atomically dispersed platinum catalysts on ceria support. The migration and aggregation of platinum atoms during the catalytic reaction leads to the redistribution of active sites. In this study, by utilizing a multimodal characterization scheme, we observed the aggregation of platinum atoms at high temperatures under reverse water gas shift reaction conditions and the subsequent fragmentation of platinum clusters, forming “single atoms” upon cooling. Theoretical simulations of both effects uncovered the roles of carbon monoxide binding on perimeter Pt sites in the clusters and hydrogen coverage in the aggregation and fragmentation mechanisms. Finally, this study highlights the complex effects of adsorbate and supports interactions with metal sites in Pt/ceria catalysts that govern their structural transformations under in situ conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Not all platinum surfaces are the same: Effect of the support on fundamental properties of platinum adlayer and its implications for the activity toward hydrogen evolution reaction

The adsorption of atomic hydrogen on a platinum monolayer supported on orthorhombic Mo 2 C(100) surface has been investigated, considering different hydrogen surface coverages. Calculations have been performed using density functional theory with the Perdew-Burke-Ernzerhof exchange correlation functional and a D3 Van der Waals corrections. The theoretical insight has been gained into atomic hydrogen interaction with Pt monolayer, supported on both molybdenum and well-studied tungsten carbide, and considering hydrogen surface coverage. Fundamental properties of Pt adlayer depend on the support, affecting hydrogen evolution activity of the resulting systems. At low hydrogen coverage all systems, with the exception of Pt supported on the molybdenum-terminated Mo 2 C, adsorb H comparably to a pristine Pt(111) surface and their high activity for the hydrogen evolution reaction is predicted. Additionally, at higher coverages supported Pt monolayers interact with atomic hydrogen unlike the Pt(111), suggesting that the activity of the supported and unsupported platinum toward hydrogen evolution reaction have different origins. Furthermore, the position of the supported platinum monolayers on the volcano curve is a function of the surface coverage, more so than for extended metal surfaces. Therefore, hydrogen surface coverage is a key variable to understand the catalytic potential, approaching towards an improved model for screening of electrocatalytic systems.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Thermodynamic and Kinetic Roles of H2 in Structure Evolution of Urchin-like Co: A density functional theory study

Small gas molecules working as good capping agents play important roles in controlling the morphologies and surface structures of the metal nanocrystals. In present work, the thermodynamic and kinetic roles of H2 molecule played on the morphology of Co nanocrystal were systematically studied based on density functional theory (DFT). The Gibbs surface free energies (?) of Co(100), Co(110) and Co(111) under different hydrogen surface coverages were investigated by ab initio thermodynamics, based on which i) the phase diagrams of stable H coverage on each plane were obtained; ii) the morphology evolutions of the Co nanocrystals with various surface hydrogen coverages were further predicted by Wulff construction. It was revealed that addition of H2 could change the facet stability generating diverse morphological Co nucleus. The kinetic role of H2 was further explored by DFT during adatom Co surface diffusions under different H coverages (?H), which suggested that except for Co(100) at ?H of 0.56 ML, the surface H would hinder Co surface diffusions. The projected density of state (PDOS) gave a deeper insight that the electronic structures of the Co adatom could be alerted by addition of the surface H, which thereby affected its surface diffusion ability. X. Wang, N. Liu, Q. Zhang, X. Liang, and B. Chen were financially supported by the National Natural Science Foundation of China (No. 21476012, 21571012, and 91534201). D. Mei was supported by the US Department of Energy (DOE), Office of Science, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. Pacific Northwest National Laboratory (PNNL) is a multiprogram national laboratory operated for DOE by Battelle. Computing time was granted by the facility user proposal grand challenge of computational catalysis of the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL). EMSL is a national scientific user facility located at Pacific Northwest National Laboratory (PNNL) and sponsored by DOE’s Office of Biological and Environmental Research.

Nanocrystal Co, Surface free energy, Surface diffu↗