Search NASA⌕ Search

SEARCH · Search NASA

Results for “Hydrogenated materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Hydrogen from Carbonaceous Waste Material - Hydrogen Fuel Cells Prize Phase 2 Voucher: Cooperative Research and Development (Final Report)

NLR conducted a conceptual design study for scaling up biomass conversion technology from Green Fortress Engineering (GFE). GFE has proprietary technology where cellulosic biomass is thermally converted to a tar-free syngas. A ceramic membrane separation unit (MSU) previously developed with NLR can extract high-purity hydrogen from the syngas. The energy content of the retentate stream is sufficient to power the process with a gas-powered genset. Design details including mass and energy balances, process and instrumentation diagrams (P&ID), and major equipment schedules were delivered.

08 HYDROGEN↗

Identification of Hydrogen Material Risk Research Areas

This report presents a research framework for the application of quantitative risk assessment to hydrogen materials, based on the identification of potential areas of research, a literature review, and a plan for future work in the area of hydrogen materials risk. After outlining basics on hydrogen infrastructure, with a focus on pressure vessels, a number of materials risk topics are identified and discussed. Of these, four important areas of risk application to hydrogen materials are highlighted and discussed in further detail. The four topics are initial crack distribution in metals, damage and stress rupture in composites, and polymer behavior in high pressure hydrogen. These topics vary in scope, specificity, level of anticipated resources required, and potential impact to the field. Finally, recommendations are made for future research on the highest priority topics.

08 HYDROGEN↗

Hydrogen Materials - Advanced Research Consortium (HyMARC) Core National Laboratory Team

The Hydrogen Materials—Advanced Research Consortium (HyMARC) is the core storage material research team of the DOE/EERE Fuel Cell Technologies Office (FCTO) and is comprised of Sandia National Laboratories (Livermore, CA; SNL), Lawrence Livermore National Laboratory (LLNL), and Lawrence Berkeley Laboratory (LBNL). Its objective is to overcome critical scientific barriers limiting the use of solid-state materials for vehicular hydrogen storage, thereby enabling design and discovery of breakthrough storage materials. Over the three-year lifetime of the project, HyMARC "moved the bar" relative to compressed gas storage by identifying the most promising material improvement strategies, obtaining thermodynamic data that was either missing or inaccurate in the literature, and filling major gaps in the toolkit of computational models. The HyMARC team also developed many new capabilities in the areas of material synthesis and characterization that address specific roadblocks to discovery of successful storage materials.

08 HYDROGEN↗

Detection of dynamical transitions in hydrogenous materials using transmission measurements with very cold neutrons

We have tested the transmission of very cold neutrons as a method to measure dynamical transitions in hydrogenous materials. Transmitted intensities vs. temperature at 30 A neutron wavelength were measured for four materials that undergo phase transformations associated with changes in dynamics: ammonium iodide, sodium borohydride, hexamethylbenzene, and dicesium dodecahydro-closo-dodecaborate. In some cases, neutron vibrational spectra above and below the transformation temperatures are compared to the transmission results. The measurements show changes in transmission at or near the transition for all these compounds, reflecting dynamical changes. The results demonstrate that the transmission method is sensitive to motional changes due to a wide range of structural transitions, from first-order to much more subtle order-disorder effects and for both small molecular species and larger molecules. The technique is valuable for rapid (ca. hours) scans of new materials to guide neutron inelastic scattering experiments or to complement the results of other techniques. - Graphical abstract: The transmission of very long wavelength neutrons is a highly sensitive probe of dynamical transitions in hydrogenous materials. Highlights: > Transmission of very long wavelength neutrons can probe dynamical transitions. > The technique is sensitive for both first-order and order-disorder transformations. > Changes in dynamical behavior of small and large molecular species can be detected. > This method can be a valuable guide for complex neutron scattering experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High Pressure Hydrogen Materials Compatibility of Piezoelectric Films

Abstract: Hydrogen is being considered as a next-generation clean burning fuel. However, hydrogen has well known materials issues, including blistering and embrittlement in metals. Piezoelectric materials are used as actuators in hydrogen fuel technology. We present studies of materials compatibility of piezoelectric films in a high pressure hydrogen environment. Absorption of high pressure hydrogen was studied with Elastic Recoil Detection Analysis (ERDA) and Rutherford Back Scattering (RBS) in lead zirconate titanate (PZT) and barium titanate (BTO) thin films. Hydrogen surface degradation in the form of blistering and Pb mixing was also observed.

08 HYDROGEN↗

Multiphysics Thermal-Fluid Design Analysis of a Non-Nuclear Tester for Hot-Hydrogen Materials and Component Development

The objective of this effort is to perform design analyses for a non-nuclear hot-hydrogen materials tester, as a first step towards developing efficient and accurate multiphysics, thermo-fluid computational methodology to predict environments for hypothetical solid-core, nuclear thermal engine thrust chamber design and analysis. The computational methodology is based on a multidimensional, finite-volume, turbulent, chemically reacting, thermally radiating, unstructured-grid, and pressure-based formulation. The multiphysics invoked in this study include hydrogen dissociation kinetics and thermodynamics, turbulent flow, convective, and thermal radiative heat transfers. The goals of the design analyses are to maintain maximum hot-hydrogen jet impingement energy and to minimize chamber wall heating. The results of analyses on three test fixture configurations and the rationale for final selection are presented. The interrogation of physics revealed that reactions of hydrogen dissociation and recombination are highly correlated with local temperature and are necessary for accurate prediction of the hot-hydrogen jet temperature.

Wang, Ten-See↗

Edge-Functionalized Graphene Nanoribbon Encapsulation To Enhance Stability and Control Kinetics of Hydrogen Storage Materials

Hydrogen is a long-term clean energy carrier that enables completely carbon-free energy production. However, practical implementation of hydrogen fuel technologies is restricted because of lack of safe and high-performing storage materials. Here, we report Mg nanocrystals encapsulated by narrow, bottom-up synthesized graphene nanoribbons (GNRs) as environmentally stable and high-capacity hydrogen storage materials. As an encapsulation medium, GNRs offer similar functionalities as reduced graphene oxide to protect the encapsulated Mg nanocrystals from extensive oxidation, while allowing penetrations of hydrogen. In addition, the GNRs can be edge functionalized to tune the (de-)hydrogenation kinetics, in particular for the processes occurred at the GNR–Mg interfaces. In this work, four different types of edge-functional groups were introduced into GNRs with the goal of comparing their cycling performances because of edge functionalization. On the basis of detailed kinetic analysis coupled with first-principles calculations, we propose that edge-functional groups can contribute to the reduction of kinetic barriers for surface hydrogen reactions at the interface with the GNR by stabilizing surface defects. Furthermore, the GNR–Mg composite exhibited higher hydrogen storage capacity (7.1 wt % of hydrogen based on the total composite) compared with the current literature while demonstrating long-term air stability. This work suggests that the rational design of edge-functional groups in graphene derivatives can provide a general and novel paradigm for simultaneous encapsulation and hydrogen storage catalysis in simple metal or complex metal nanocrystals.

08 HYDROGEN↗

Gas storage materials, including hydrogen storage materials

A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material, such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

08 HYDROGEN↗

High Throughput Screening of Nanostructured Hydrogen Storage Materials

Hydrogen storage is the most challenging task for the hydrogen economy. We established a multidisciplinary research program for high throughput combinatorial synthesis and characterization of novel nanoporous and metastable complex hydrides, coupled to fundamental material studies including electronic, structural and kinetic transport modeling, and pump-probe experiments. Our research is based the concept of hybrid nanostructures that store hydrogen by a combination of chemi- and physorption: atomic hydrogen is stored in metastable hydrides while molecule hydrogen is stored in the nanometer pores of the hydrides. Metastable nanostructured hydride has been achieved by introducing structural and compositional disorders through high throughput elemental substitution/doping, catalyst addition, and nonequilibrium processing. Fast screening compatible with the combinatorial synthesis was achieved by combining X-ray structural characterization with the development of a laser-based microbalance. Manufacturing of nanoporous metahydrides that are identified as promising by the combinatorial synthesis has been explored along with the materials search.

36 MATERIALS SCIENCE↗

Gas storage materials, including hydrogen storage materials

A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

36 MATERIALS SCIENCE↗

Hydrogen Materials Advanced Research Consortium (HyMARC): Sandia Technical Effort

A trilateral agreement has been finalized involving research institutions in Korea, Japan, and the U.S. The project partners are Sandia, LLNL, KIST, KAIST, and AIST. The project title is “Structure-Property Relationships in Metal Alloys for Hydrogen Storage and Processing.” Funding for the U.S. portion of the effort is through NNSA; the PI is Vitalie Stavila. The overall objective of this project is to identify detailed structure-property relationships governing hydrogen separation, purification, storage, and compression in compositionally complex metal alloys.

08 HYDROGEN↗

Multiphysics Thermal-Fluid Analysis of a Non-Nuclear Tester for Hot-Hydrogen Materials Development

The objective of this effort is to analyze the thermal field of a non-nuclear tester, as a first step towards developing efficient and accurate multiphysics, thermo-fluid computational methodology to predict environments for hypothetical solid-core, nuclear thermal engine thrust chamber design and analysis. The computational methodology is based on a multidimensional, finite-volume, turbulent, chemically reacting, radiating, unstructured-grid, and pressure-based formulation. The multiphysics invoked in this study include hydrogen dissociation kinetics and thermodynamics, turbulent flow, convective, radiative and conjugate heat transfers.

Wang, Ten-See↗