Search NASA⌕ Search

SEARCH · Search NASA

Results for “I-N”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

High-sensitivity silicon ultraviolet p+-i-n avalanche photodiode using ultra-shallow boron gradient doping

Photo detection of ultraviolet (UV) light remains a challenge since the penetration depth of UV light is limited to the nanometer scale. Therefore, the doping profile and electric field in the top nanometer range of the photo detection devices become critical. Traditional UV photodetectors usually use a constant doping profile near the semiconductor surface, resulting in a negligible electric field, which limits the photo-generated carrier collection efficiency of the photodetector. Here, we demonstrate, via the use of an optimized gradient boron doping technique, that the carrier collection efficiency and photo responsivity under the UV wavelength region have been enhanced. Moreover, the ultrathin p+-i-n junction shows an avalanche gain of 2800 and an ultra-low junction capacitance (sub pico-farad), indicating potential applications in the low timing jitter single photon detection area.

36 MATERIALS SCIENCE↗

Post-breakdown bulk oscillations in gold-doped silicon p/+/-i-n/+/ double-injection diodes

Experimental results on postbreakdown bulk oscillations in n-type gold-doped phosphorus-compensated p(+)-i-n(+) double-injection diodes is presented. It is suggested that changes observed in the postbreakdown oscillation frequency and amplitude are due to changes in the prebreakdown characteristics. An empirical relationship for the frequency of oscillation is derived. It is concluded that the postbreakdown oscillations are drift-related, although their exact mechanism is not known.

Mantha, B.↗

In-situ hydrogen microstructural characterization of Si heterojunction passivation: Addressing V OC degradation and mitigation pathways

Si heterojunction (SHJ) solar cells have demonstrated record efficiency >27%, approaching the theoretical limit of ≈ 29%, primarily due to best surface/interface defect passivation provided by deposited thin layers of hydrogenated amorphous silicon (a-Si:H). Such excellent surface/interface passivation reduces recombination loss and result in >100 mV improvement of cell open circuit voltage (V OC ) to ≈ 750 mV, thus the cell efficiency. However, fielded SHJ modules exhibit loss of V OC and hence efficiency over time in years, presumably due to degradation related to a-Si:H layers. This adversely affects the technology’s market acceptance, and levelized cost of energy (LCOE). It is hypothesized that the origin of a-Si:H degradation is somehow related to the presence of weak Si–Si bonds and hydrogen in a-Si:H films. The objective of this project is to test this hypothesis by directly measuring chemical and structural changes occurring within SHJ component layers and solar cells. This is achieved by developing an innovative in-situ Fourier transform infrared (FTIR) spectrometry apparatus to monitor hydrogen microstructural changes occurring within amorphous silicon and decipher hydrogen evolution kinetics over time when samples are exposed to heat and/or light stress. These in-situ measured hydrogen microstructural changes are correlated to the changes in effective minority carrier lifetime (τ eff ), implied V OC (iV OC ), surface recombination velocity (S), and cell V OC . These mechanistic understandings will provide critical guidance to mitigate the V OC -driven degradation of SHJ solar cell performance. Passivation optimization and degradation analysis of individual SHJ component structures were achieved through systematic deposition of three symmetric structures and the completed SHJ solar cell structure. The three symmetric structures used were intrinsic a-Si:H [(i)a-Si:H] layers in a bilayer structure, intrinsic and p-type doped stacked layers [(i-p)a-Si:H] representing the front heterojunction in the SHJ cell, and intrinsic and n-typed doped stacked layers [(i-n)a-Si:H] representing the back-side back surface field (BSF) in the SHJ cell. State-of-the-art passivation qualities are demonstrated by a champion iV OC of 740 mV for the (i)a-Si:H layers, and the (i-n)a-Si:H symmetric structure. A 725 mV iV OC is observed for the (i-p)a-Si:H symmetric structure. These symmetric passivated SHJ component structures were subsequently subjected to different accelerated lifetime (ALT) stressors to identify which conditions contribute the most to iV OC degradation. Degradation of the thin (10 nm) (i)a-Si:H passivation layers without any additional overlying layers is minimal; complexity of this study arises due to unavoidable surface oxidation of (i)a-Si:H layer during most of the stress application, which is likely irrelevant for a full SHJ cell configuration with overlying protective layers. The iV OC degradation of symmetric structures is found to occur primarily at the (i-p)a-Si:H passivation stack under dark heat stress with associated hydrogen loss from the (p)a-Si:H layer. An activation energy for increase in S (defect creation) of 0.65 eV can be correlated to the activation energy of ≈ 0.4 eV for hydrogen loss from the (i-p)a-Si:H stack. This also suggests the presence of weakly bonded hydrogen in the (p)a-Si:H films, which effuses out of the film stack at such low activation energy. When light and heat stress are applied together, similar hydrogen loss from (i-p)a-Si:H stack is observed, however, does not appreciably degrade iV OC or increase S. This is an important result and departure from direct correlation between hydrogen loss and defect creation. This perhaps indicates additional defect chemistries or annealing that might be occurring in the presence of light requiring further detailed defect measurements. The full SHJ cell structure used for this project is depicted in Fig.1(d). SHJ cells with an initial V OC ≈ 700 mV were fabricated and subjected to similar ALT stress conditions. Cell V OC is found to degrade the most under dark heat stress and is confirmed by observed hydrogen migration out of the (i-p)a-Si:H stack. However, hydrogen cannot escape from the cell stack, it accumulates near the (p)a-Si:H/ITO contact interface, where ITO acts as a barrier preventing hydrogen loss. Furthermore, light-heat combined stress does not degrade V OC appreciably, confirming the occurrence of a defect annealing process.

14 SOLAR ENERGY↗

The j and k dependencies of the line coupling and line mixing effects: Theoretical studies of the relaxation matrices of N 2 -broadened CH 3 D

Line coupling and line mixing effects in parallel and perpendicular bands of CH 3 D perturbed by N 2 have been studied. The work focuses on exhibiting the j and k dependencies of these two processes. The calculations were based on a previously reported anisotropic intermolecular potential including both the long-range multipole, induction, and dispersion forces and a short-range atom-atom model. Throughout this work, it is shown that components with L 1 = 3 of the atom-atom model are dominant contributions to the diffusion operator. As a consequence, in comparison with other molecular systems such as the CH 3 Cl-N 2 and CH 3 I-N 2 , theoretically predicted line coupling and line mixing effects exhibit completely new j and k dependencies. In general, the theoretically calculated halfwidths and intra-doublets’ off-diagonal elements of the relaxation matrix are in reasonable agreement with measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Speed-dependent collision effects on radar back-scattering from the ionosphere

A computer code to accurately compute the fluctuation spectrum for linearly speed dependent collision frequencies was developed. The effect of ignoring the speed dependence on the estimates of ionospheric parameters was determined. It is shown that disagreements between the rocket and the incoherent scatter estimates could be partially resolved if the correct speed dependence of the i-n collision frequency is not ignored. This problem is also relevant to the study of ionospheric irregularities in the auroral E-region and their effects on the radio communication with satellites.

Theimer, O.↗

Electrolysis Propulsion for Spacecraft Applications

Electrolysis propulsion has been recognized over the last several decades as a viable option to meet many satellite and spacecraft propulsion requirements. This technology, however, was never used for in-space missions. In the same time frame, water based fuel cells have flown in a number of missions. These systems have many components similar to electrolysis propulsion systems. Recent advances in component technology include: lightweight tankage, water vapor feed electrolysis, fuel cell technology, and thrust chamber materials for propulsion. Taken together, these developments make propulsion and/or power using electrolysis/fuel cell technology very attractive as separate or integrated systems. A water electrolysis propulsion testbed was constructed and tested in a joint NASA/Hamilton Standard/Lawrence Livermore National Laboratories program to demonstrate these technology developments for propulsion. The results from these testbed experiments using a I-N thruster are presented. A concept to integrate a propulsion system and a fuel cell system into a unitized spacecraft propulsion and power system is outlined.

deGroot, Wim A.↗

Exploring Damped Ly Alpha System Host Galaxies Using Gamma-Ray Bursts

We present a sample of 45 Damped Ly-Alpha system [DLA; H I-N is greater than or equal to 2 x 10(exp. 20) cm(exp. -2)] counterparts (33 detections, 12 upper limits) which host gamma-ray bursts (GRB-DLAs) in order to investigate star formation and metallicity within galaxies hosting DLAs. Our sample spans z is approx. 2 - 6 and is nearly three times larger than any previously detected DLA counterparts survey based on quasar line-of-sight searches (QSO-DLAs). We report star formation rates (SFRs) from rest-frame UV photometry and spectral energy distribution modeling. We find that DLA counterpart SFRs are not correlated with either redshift or H I column density. Thanks to the combination of Hubble Space Telescope and ground-based observations, we also investigate DLA host star formation efficiency. Our GRB-DLA counterpart sample spans both higher efficiency and low efficiency star formation regions compared to the local Kennicutt-Schmidt relation, local star formation laws, and z is approximately 3 cosmological simulations. We also compare the depletion times of our DLA hosts sample to other objects in the local universe; our sample appears to deviate from the star formation efficiencies measured in local spiral and dwarf galaxies. Furthermore, we find similar efficiencies as local inner disks, SMC, and Lyman-break galaxy outskirts. Finally, our enrichment time measurements show a spread of systems with under- and over-abundance of metals, which may suggest that these systems had episodic star formation and a metal enrichment/depletion as a result of strong stellar feedback and/or metal inflow/outflow.

galaxies: high-redshift – galaxies: ISM – gala↗

The J and K Dependencies of the Line Coupling and Line Mixing Effects: Theoretical Studies of the Relaxation Matrices of N 2 -Broadened Ch 3 D

Line coupling and line mixing effects in parallel and perpendicular bands of CH 3 D perturbed by N 2 have been studied. The work focuses on exhibiting the j and k dependencies of these two processes. The calculations were based on a previously reported anisotropic intermolecular potential including both the long-range multipole, induction, and dispersion forces and a short-range atom-atom model. It is shown that components with L 1 = 3 of the atom-atom model are dominant contributions to the diffusion operator. As a consequence, in comparison with other molecular systems such as the CH 3 Cl-N 2 and CH 3 I-N 2 , theoretically predicted line coupling and line mixing effects exhibit completely new j and k dependencies. In general, the theoretically calculated halfwidths and intra-doublets’ off-diagonal elements of the relaxation matrix are in reasonable agreement with measurements.

Methane-d↗

Materials Data on IN3 by Materials Project

IN3 crystallizes in the triclinic P1 space group. The structure is one-dimensional and consists of two IN3 clusters. there are five inequivalent N+0.33+ sites. In the first N+0.33+ site, N+0.33+ is bonded in a 1-coordinate geometry to one N+0.33+ atom. The N–N bond length is 1.26 Å. In the second N+0.33+ site, N+0.33+ is bonded in a distorted bent 120 degrees geometry to two N+0.33+ atoms. There is one shorter (1.30 Å) and one longer (1.31 Å) N–N bond length. In the third N+0.33+ site, N+0.33+ is bonded in a distorted trigonal planar geometry to two N+0.33+ and one I1- atom. The N–N bond length is 1.27 Å. The N–I bond length is 2.91 Å. In the fourth N+0.33+ site, N+0.33+ is bonded in a distorted bent 120 degrees geometry to two N+0.33+ atoms. The N–N bond length is 1.31 Å. In the fifth N+0.33+ site, N+0.33+ is bonded in a distorted trigonal planar geometry to two N+0.33+ and one I1- atom. The N–I bond length is 2.91 Å. There are two inequivalent I1- sites. In the first I1- site, I1- is bonded in a 1-coordinate geometry to one N+0.33+ atom. In the second I1- site, I1- is bonded in a 1-coordinate geometry to one N+0.33+ atom.

36 MATERIALS SCIENCE↗

Materials Data on I3N by Materials Project

I3(N) crystallizes in the orthorhombic Pnma space group. The structure is one-dimensional and consists of four jodamin molecules and two I ribbons oriented in the (0, 1, 0) direction. In each I ribbon, there are two inequivalent I1- sites. In the first I1- site, I1- is bonded in a linear geometry to two equivalent I1- atoms. There are one shorter (2.91 Å) and one longer (2.97 Å) I–I bond lengths. In the second I1- site, I1- is bonded in a distorted water-like geometry to two equivalent I1- atoms.

36 MATERIALS SCIENCE↗

Materials Data on IN2 by Materials Project

IN2 is High Pressure Cadmuum Telluride structured and crystallizes in the tetragonal I4/mcm space group. The structure is two-dimensional and consists of four nitrogen molecules and two I sheets oriented in the (0, 0, 1) direction. In each I sheet, I1- is bonded in a square co-planar geometry to four equivalent I1- atoms. All I–I bond lengths are 3.45 Å.

36 MATERIALS SCIENCE↗

Materials Data on I5N2 by Materials Project

I3(N)IN1I is Ammonia-like structured and crystallizes in the hexagonal P6_3mc space group. The structure is zero-dimensional and consists of two hydriodic acid molecules, two jodamin molecules, and two nitrogen triiodide molecules.

36 MATERIALS SCIENCE↗

Materials Data on IN by Materials Project

IN1 is Halite, Rock Salt structured and crystallizes in the cubic Fm-3m space group. The structure is three-dimensional. N1+ is bonded to six equivalent I1- atoms to form a mixture of corner and edge-sharing NI6 octahedra. The corner-sharing octahedral tilt angles are 0°. All N–I bond lengths are 2.60 Å. I1- is bonded to six equivalent N1+ atoms to form a mixture of corner and edge-sharing IN6 octahedra. The corner-sharing octahedral tilt angles are 0°.

36 MATERIALS SCIENCE↗

Materials Data on IN2 by Materials Project

IN2 is Khatyrkite structured and crystallizes in the orthorhombic Ibam space group. The structure is one-dimensional and consists of eight ammonia molecules and two I ribbons oriented in the (1, 0, 0) direction. In each I ribbon, I1- is bonded in a linear geometry to two equivalent I1- atoms. Both I–I bond lengths are 2.88 Å.

36 MATERIALS SCIENCE↗

Materials Data on I2N3 by Materials Project

N2I2(N) crystallizes in the tetragonal P4/n space group. The structure is zero-dimensional and consists of eight ammonia molecules and four diiodoamine molecules.

36 MATERIALS SCIENCE↗

Materials Data on IN4 by Materials Project

IN4 crystallizes in the orthorhombic P2_12_12_1 space group. The structure is one-dimensional and consists of four IN4 ribbons oriented in the (1, 0, 0) direction. there are four inequivalent N+0.25+ sites. In the first N+0.25+ site, N+0.25+ is bonded in a 3-coordinate geometry to one N+0.25+ and two equivalent I1- atoms. The N–N bond length is 1.30 Å. There are one shorter (2.26 Å) and one longer (2.82 Å) N–I bond lengths. In the second N+0.25+ site, N+0.25+ is bonded in a 3-coordinate geometry to three N+0.25+ atoms. There is one shorter (1.33 Å) and one longer (1.37 Å) N–N bond length. In the third N+0.25+ site, N+0.25+ is bonded in a distorted single-bond geometry to one N+0.25+ and one I1- atom. The N–I bond length is 2.05 Å. In the fourth N+0.25+ site, N+0.25+ is bonded in a distorted water-like geometry to one N+0.25+ and one I1- atom. The N–I bond length is 2.13 Å. I1- is bonded in a 3-coordinate geometry to four N+0.25+ atoms.

36 MATERIALS SCIENCE↗

Materials Data on IN4 by Materials Project

IN4 crystallizes in the orthorhombic Pna2_1 space group. The structure is one-dimensional and consists of eight nitrogen molecules and two I ribbons oriented in the (1, 0, 0) direction. In each I ribbon, I1- is bonded in a bent 150 degrees geometry to two equivalent I1- atoms. Both I–I bond lengths are 3.04 Å.

36 MATERIALS SCIENCE↗

Materials Data on IN5 by Materials Project

IN5 is lead oxide-like structured and crystallizes in the tetragonal P4/n space group. The structure is zero-dimensional and consists of two ammonia molecules and two IN4 clusters. In each IN4 cluster, N+0.20+ is bonded in a single-bond geometry to one I1- atom. The N–I bond length is 2.13 Å. I1- is bonded in a distorted square co-planar geometry to four equivalent N+0.20+ atoms.

36 MATERIALS SCIENCE↗