Search NASA⌕ Search

SEARCH · Search NASA

Results for “IMPACT SHOCK”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

OXIDIZING PROTO-ATMOSPHERE ON TITAN: CONSTRAINT FROM N{sub 2} FORMATION BY IMPACT SHOCK

Titan is the only satellite that possesses a thick atmosphere, composed mainly of N{sub 2} and CH{sub 4}. However, its origin and evolution remain largely unknown. Knowledge of the acquirement of a N{sub 2} atmosphere on Titan would provide insights into nitrogen evolution in planetary atmospheres as well as the formation of satellite systems around gas giants. Previous studies have proposed that the atmospheric N{sub 2} would have been converted from NH{sub 3} via shock heating by accreting satellitesimals in the highly reducing proto-atmosphere composed of NH{sub 3} and CH{sub 4}. Nevertheless, the validity of this mechanism strongly depends on both the composition of the proto-atmosphere and kinetics of shock chemistry. Here, we show that a CO{sub 2}-rich oxidizing proto-atmosphere is necessary to form N{sub 2} from NH{sub 3} efficiently by atmospheric shock heating. Efficient shock production of N{sub 2} is inhibited in a reducing proto-atmosphere composed of NH{sub 3} and CH{sub 4}, because CH{sub 4} plays as the coolant gas owing to its large heat capacity. Our calculations show that the amount of N{sub 2} produced in a CO{sub 2}-rich proto-atmosphere could have reached {approx}20 times that on the present Titan. Although further quantitative analysis are required (especially, the occurrence of catalytic reactions), our results imply that the chemical composition of satellitesimals that formed the Saturnian system is required to be oxidizing if the current atmospheric N{sub 2} is derived from the shock heating in the proto-atmosphere during accretion. This supports the formation of regular satellites in an actively supplied circumplanetary disk using CO{sub 2}-rich materials originated from the solar nebula at the final stage of gas giant formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Interpreting Experimental Results from Shock Impacts on Single Crystal PETN in the Context of Continuum Models

Here we interpret previous experimental measurements of impacts on single crystal PETN in the context of a simple continuum model. Hugoniot calculations using the simple model framework under various limiting assumptions envelope measured Hugoniot states reasonably well and suggest that non-negligible deviatoric elastic strains may exist in the shock compressed state for weak impacts. An accompanying simple kinematic model for lattice deformation was used to estimate the expected shifts in X-ray diffraction peaks for the (211) plane under impacts normal to (110) planes. The results suggest that negligible relaxation of the deviatoric lattice deformation occurs on the short (10–20 ns) time and wave propagation (40–80 m) scales of laser-driven shock experiments, and that the corresponding elastic strains may be large. Because of the potentially large deviatoric elastic strains, the specific finite deformation strain measure used within thermomechanical single crystal models is of significant consequence, which is explored numerically by the comparison of isothermal purely elastic responses under uniaxial and simple shear deformations.

36 MATERIALS SCIENCE↗

Bayesian calibration of strength parameters using hydrocode simulations of symmetric impact shock experiments of Al-5083

We report that predictive modeling of materials requires accurately parameterized constitutive models. Parameterizing models that describe dynamic strength and plasticity require experimentally probing materials in a variety of strain rate regimes. Some experimental protocols (e.g., plate impact) probe the constitutive response of a material using indirect measures such as free surface velocimetry. Manual efforts to parameterize constitutive models using indirect experimental measures often lead to non-unique optimizations without quantification of parameter uncertainty. This study uses a Bayesian statistical approach to find model parameters and to quantify the uncertainty of the resulting parameters. The technique is demonstrated by parameterizing the Johnson-Cook strength model for aluminum alloy 5083 by coupling hydrocode simulations and velocimetry measurements of a series of plate impact experiments. Simulation inputs and outputs are used to calibrate an emulator that mimics the outputs of the computationally intensive simulations. Varying the amount of experimental data available for emulator calibration showed clear differences in the degree of uncertainty and uniqueness of the resulting optimized Johnson-Cook parameters for Al-5083. The results of the optimization provided a numerical evaluation of the degree of confidence in model parameters and model performance. Lastly, given an understanding of the physical effects of certain model parameters, individual parameter uncertainty can be leveraged to quickly identify gaps in the physical domains covered by completed experiments.

36 MATERIALS SCIENCE↗

Structural response of α-quartz under plate-impact shock compression

Because of its far-reaching applications in geophysics and materials science, quartz has been one of the most extensively examined materials under dynamic compression. Despite 50 years of active research, questions remain concerning the structure and transformation of SiO 2 under shock compression. Continuum gas-gun studies have established that under shock loading quartz transforms through an assumed mixed-phase region to a dense high-pressure phase. While it has often been assumed that this high-pressure phase corresponds to the stishovite structure observed in static experiments, there have been no crystal structure data confirming this. In this study, we use gas-gun shock compression coupled with in situ synchrotron x-ray diffraction to interrogate the crystal structure of shock-compressed α-quartz up to 65 GPa. Our results reveal that α-quartz undergoes a phase transformation to a disordered metastable phase as opposed to crystalline stishovite or an amorphous structure, challenging long-standing assumptions about the dynamic response of this fundamental material.

58 GEOSCIENCES↗

Experimental Measurement and Analysis of Stress/Shock Wave Propagation Speed through Pre-strained Silicone Foam Pads under Lateral Confinement

Foam materials are increasingly utilized in aerospace, military, and transportation applications to mitigate blast or shock impact. When foam materials are subjected to an external high-speed impact, shock, or blast loading, an elastic wave or shock wave will form and propagate through the thickness of the foam materials. Here, silicone foam pads, which were confined laterally and pre-strained to different levels, were experimentally characterized and theoretically analyzed to understand their effects on wave propagation characteristics under impact loading. Depending on impact velocity, either an elastic strain wave or a shock wave would be generated in the silicone foam pad with different pre-strains. Above a certain impact velocity, a shock wave will be generated whereas, below this threshold impact velocity, an elastic strain wave will be generated. This threshold impact velocity depends on the pre-strain applied to the silicone foam pad. Equations are provided to estimate the wave propagation speed for either an elastic or a shock wave from the amount of pre-strain in the silicone foam pads and the impact velocity. These equations are expected to help improve silicone foam design and assembly processes for shock or blast mitigation applications.

36 MATERIALS SCIENCE↗

Numerical Study of Erosion, Heating, and Acceleration of the Magnetic Cloud as Impacted by Fast Shock

The impact of an overtaking fast shock on a magnetic cloud (MC) is a pivotal process in CME–CME (CME: coronal mass ejection) interactions and CME–SIR (SIR: stream interaction region) interactions. MC with a strong and rotating magnetic field is usually deemed a crucial part of CMEs. To study the impact of a fast shock on an MC, we perform a 2.5 dimensional numerical magnetohydrodynamic simulation. Two cases are run in this study: without and with impact by fast shock. In the former case, the MC expands gradually from its initial state and drives a relatively slow magnetic reconnection with the ambient magnetic field. Analyses of forces near the core of the MC as a whole body indicates that the solar gravity is quite small compared to the Lorentz force and the pressure gradient force. In the second run, a fast shock propagates, relative to the background plasma, at a speed twice that of the perpendicular fast magnetosonic speed, catches up with and takes over the MC. Due to the penetration of the fast shock, the MC is highly compressed and heated, with the temperature growth rate enhanced by a factor of about 10 and the velocity increased to about half of the shock speed. The magnetic reconnection with ambient magnetic field is also sped up by a factor of two to four in reconnection rate as a result of the enhanced density of the current sheet, which is squeezed by the forward motion of the shocked MC.

79 ASTRONOMY AND ASTROPHYSICS↗

An added-mass partition algorithm for fluid–structure interactions of compressible fluids and nonlinear solids

We describe an added-mass partitioned (AMP) algorithm for solving fluid–structure interaction (FSI) problems involving inviscid compressible fluids interacting with nonlinear solids that undergo large rotations and displacements. The computational approach is a mixed Eulerian–Lagrangian scheme that makes use of deforming composite grids (DCG) to treat large changes in the geometry in an accurate, flexible, and robust manner. The current work extends the AMP algorithm developed in Banks et al. [1] for linearly elasticity to the case of nonlinear solids. To ensure stability for the case of light solids, the new AMP algorithm embeds an approximate solution of a nonlinear fluid–solid Riemann (FSR) problem into the interface treatment. The solution to the FSR problem is derived and shown to be of a similar form to that derived for linear solids: the state on the interface being fundamentally an impedance-weighted average of the fluid and solid states. Numerical simulations demonstrate that the AMP algorithm is stable even for light solids when added-mass effects are large. The accuracy and stability of the AMP scheme is verified by comparison to an exact solution using the method of analytical solutions and to a semi-analytical solution that is obtained for a rotating solid disk immersed in a fluid. The scheme is applied to the simulation of a planar shock impacting a light elliptical-shaped solid, and comparisons are made between solutions of the FSI problem for a neo-Hookean solid, a linearly elastic solid, and a rigid solid. The ability of the approach to handle large deformations is demonstrated for a problem of a high-speed flow past a light, thin, and flexible solid beam.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

CO–0.30–0.07: A peculiar molecular clump with an extremely broad velocity width in the central molecular zone of the Milky Way

The high velocity dispersion compact cloud CO–0.30–0.07 is a peculiar molecular clump discovered in the central molecular zone of the Milky Way, which is characterized by its extremely broad velocity emissions (∼145 km s{sup −1}) despite the absence of internal energy sources. We present new interferometric maps of the cloud in multiple molecular lines in frequency ranges of 265–269 GHz and 276–280 GHz obtained using the Submillimeter Array, along with the single-dish images previously obtained with the ASTE 10 m telescope. The data show that the characteristic broad velocity emissions are predominantly confined in two parallel ridges running through the cloud center. The central ridges are tightly anticorrelated with each other in both space and velocity, thereby sharply dividing the entire cloud into two distinct velocity components (+15 and +55 km s{sup −1}). This morphology is consistent with a model in which the two velocity components collide with a relative velocity of 40 km s{sup −1} at the interface defined by the central ridges, although an alternative explanation with a highly inclined expanding-ring model is yet to be fully invalidated. We have also unexpectedly detected several compact clumps (≲0.1 pc in radius) likely formed by shock compression. The clumps have several features in common with typical star-forming clouds: high densities (10{sup 6.5−−7.5} cm{sup −3}), rich abundances of hot-core-type molecular species, and relatively narrow velocity widths apparently decoupled from the furious turbulence dominating the cloud. The cloud CO–0.30–0.07 is possibly at an early phase of star formation activity triggered by the shock impact.

79 ASTRONOMY AND ASTROPHYSICS↗

The Spall Strength and Dynamic Yield Stress of Hafnium

The spall strength and dynamic yield stress of polycrystalline hafnium have been measured in a series of plane-wave shock loading experiments using flat sample–transparent window composite targets, with the transparent windows representing polymethyl methacrylate or lithium fluoride plates arranged on the rear side of a hafnium sample. The front side of the target was subjected to shock impact of a copper striker, the rear surface velocity was measured, and the sample was recovered for subsequent metallographic examination. The results were also used for evaluation of the accuracy of spall strength measurements and the analysis of features of high-rate deformation of hafnium.

36 MATERIALS SCIENCE↗

High-Fidelity Analysis of ULF Wave Mode Structure Following Interplanetary Shock Compression of the Dayside Magnetopause Using MMS Multi-Point Observations

During the 9 March 2018 event with two consecutive interplanetary shocks compressing the dayside magnetosphere, the azimuthal mode structure and frequency spectrum of ultra low frequency magnetic pulsations are resolved using a cross-spectral analysis based on high-fidelity multi-probe Magnetospheric Multiscale Mission (MMS) magnetometer data. The results based on the MMS 4 and MMS 3 pair of measurements show that shock arrival leads to low mode (|m| ≤ 3) magnetic fluctuations in the Pc4-5 regimes, and smaller spatial scale fluctuations implied by the dominant high mode numbers are observed after both shock signatures hit and passed the magnetosphere. Detailed evolution of the mode structure is also shown for the first shock to reveal the development of high mode structure from a bump-on-tail distribution at m≈20 to a dominant peak at m≈50 in about 10 min. In addition, an interesting change of sign in m from negative to positive is observed as MMS crosses ~11 MLT pre-noon, which is consistent with the picture of wave generation by dayside magnetopause compression and then anti-sunward propagation. Finally, for both shocks, the contribution of higher frequency waves (Pc-4 range compared with Pc-5) to the total wave power is found to be negligible before and after the shock impact, but it becomes more significant during the shock impact.

79 ASTRONOMY AND ASTROPHYSICS↗

ON THE ACTIVE REGION BRIGHT GRAINS OBSERVED IN THE TRANSITION REGION IMAGING CHANNELS OF IRIS

The Interface Region Imaging Spectrograph (IRIS) provides spectroscopy and narrow band slit-jaw (SJI) imaging of the solar chromosphere and transition region at unprecedented spatial and temporal resolutions. Combined with high-resolution context spectral imaging of the photosphere and chromosphere as provided by the Swedish 1 m Solar Telescope (SST), we can now effectively trace dynamic phenomena through large parts of the solar atmosphere in both space and time. IRIS SJI 1400 images from active regions, which primarily sample the transition region with the Si iv 1394 and 1403 Å lines, reveal ubiquitous bright “grains” which are short-lived (two to five minute) bright roundish small patches of sizes 0.″5–1.″7 that generally move limbward with velocities up to about 30 km s{sup −1}. In this paper, we show that many bright grains are the result of chromospheric shocks impacting the transition region. These shocks are associated with dynamic fibrils (DFs), most commonly observed in Hα. We find that the grains show the strongest emission in the ascending phase of the DF, that the emission is strongest toward the top of the DF, and that the grains correspond to a blueshift and broadening of the Si iv lines. We note that the SJI 1400 grains can also be observed in the SJI 1330 channel which is dominated by C ii lines. Our observations show that a significant part of the active region transition region dynamics is driven from the chromosphere below rather than from coronal activity above. We conclude that the shocks that drive DFs also play an important role in the heating of the upper chromosphere and lower transition region.

79 ASTRONOMY AND ASTROPHYSICS↗

Shock response and phase transitions of MgO at planetary impact conditions

The moon-forming impact and the subsequent evolution of the proto-Earth is strongly dependent on the properties of materials at the extreme conditions generated by this violent collision. We examine the high pressure behavior of MgO, one of the dominant constituents in Earth’s mantle, using high-precision, plate impact shock compression experiments performed on Sandia National Laboratories’ Z Machine and extensive quantum calculations using density functional theory (DFT) and quantum Monte Carlo (QMC) methods. The combined data span from ambient conditions to 1.2 TPa and 42,000 K, showing solid-solid and solid-liquid phase boundaries. Furthermore our results indicate that under impact the solid and liquid phases coexist for more than 100 GPa, pushing complete melting to pressures in excess of 600 GPa. Furthermore, the high pressure required for complete shock melting has implications for a broad range of planetary collision events.

36 MATERIALS SCIENCE↗

Generalizing the compressible pairwise interaction extended point-particle model

Ejecta physics plays an important role in material interfaces that are impacted by a strong shock wave. When a shock impacts a rough surface of solid material and melts it, the Richtmyer–Meshkov instability grows perturbations on the surface, which can eject particles. After release, the ejecta travel through the post-shock compressible flow. To accurately simulate a large number of ejecta particles, an Euler–Lagrange approach is preferred, which requires modeling the subgrid-scale physics involved with fluid–particle interactions. We generalize the previous work from Hsiao et al. (2023) to consider systems of moving particles subject to any loading shock. The following improvements were made: (1) Particles are allowed to move relative to each other (2) Non-planar shocks are accounted for along with allowing for variable shock speeds. As a result, the generalized algorithm was tested with particle-resolved simulations for canonical test cases. The results of these tests are discussed and analyzed.

97 MATHEMATICS AND COMPUTING↗