Search NASA⌕ Search

SEARCH · Search NASA

Results for “IN-SITU GASIFICATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

Investigation of Reactivities of Bimetallic Cu-Fe Oxygen Carriers with Coal in High Temperature In-situ Gasification Chemical-Looping Combustion (iG-CLC) and Chemical-Looping with Oxygen Uncoupling (CLOU) Using a Fixed Bed Reactor

This study investigated reduction reactivities and CO2 conversion efficiency of synthesized Fe-Cu-Si OCs for both in-situ gasification CLC (iG-CLC) and Chemical-Looping with Oxygen Uncoupling (CLOU) at high temperatures (950 to 1100°C) with varying ratios of OC to coal char (φ) using a fixed bed reactor-quadrupole mass spectrometer system.

Wang, Ping↗

Raman Spectroscopy for the On-Line Analysis of Oxidation States of Oxygen Carrier Particles (Final Report)

The need for cleaner energy systems, including CO 2 capture technologies, is driving the current development of chemical looping technologies such as chemical looping combustion (CLC) and chemical looping gasification (CLG). Specific processes that are under development for using solid fuels are in-situ Gasification Chemical-Looping Combustion (iG-CLC) and Chemical Looping with Oxygen Uncoupling (CLOU). Chemical looping is based on using oxygen carriers (e.g., iron oxides, copper oxides, calcium sulfates, etc.) to provide the oxygen for the reaction with the fuel. In order to optimize the overall process performance, it is critical that the properties of the oxygen carriers are well-defined and maintained for their specific purpose during the different stages of the CLC process. One of the critical properties of the oxygen carrier is its oxidation state (e.g., content of Fe 2 O 3 vs. Fe 3 O 4 ) as it affects the fundamental operation of the CLC process. Unfortunately, the ability to make on-line measurements of the oxidation state of oxygen carriers is lacking and new sensors need to be developed. The goal of this project was to evaluate the potential of Raman spectroscopy as a sensor for the on-line analysis of the oxidation state of oxygen carrier particles. Oxygen carrier particles (OCPs) of interest include iron oxides, copper oxides, calcium sulfite, and calcium sulfate, with particle sizes typically less than 0.5 mm diameter. The expected operating conditions of the sensor include OCP temperatures in the range of 800 °C to 1000 °C, and pressures of about 10 atm. We evaluated continuous wave (cw), Quasi cw, pulsed, and time-gated Raman spectroscopy at multiple wavelengths (355 nm, 360 nm, 532 nm, 633 nm, 785 nm). Samples included iron oxides, copper oxides, calcium sulfate, and a custom sample provided by NETL for temperatures beyond 1000 °C. Our findings can be summarized as follows: Calcium sulfate can be detected via cw and pulsed 532 nm Raman spectroscopy at temperatures above 1100 °C.; Hematite (Fe 2 O 3 ) Raman spectra can be detected at temperatures of 700 °C via cw 360 nm, 1089 °C with cw 532 nm, 400 °C with cw 633 and 600 °C with cw 785 nm lasers; Magnetite (Fe 3 O 4 ) can be detected via cw 532 nm Raman spectroscopy up to 600 °C; Mixtures of Fe2O3 and Fe 3 O 4 can be distinguished for temperatures up to 600 °C using 532 nm; Copper oxides did not yield suitable signals at elevated temperatures; The custom NETL samples did not yield suitable signals at elevated temperatures. Raman spectroscopy would be a suitable approach for calcium sulfate as this material provides a very strong Raman signal at high temperatures. Oxygen carrier particles of higher interest such as metal oxides, however, do not yield a strong-enough signal at elevated temperatures. As such, Raman spectroscopy is not suitable to differentiate the oxidation state of these materials at temperatures above 600 °C.

01 COAL, LIGNITE, AND PEAT↗

Raman Spectroscopy for the On-Line Analysis of Oxidation States of Oxygen Carrier Particles

The need for cleaner energy systems, including CO 2 capture technologies, is driving the current development of chemical looping technologies such as chemical looping combustion (CLC) and chemical looping gasification (CLG). Specific processes that are under development for using solid fuels are in-situ Gasification Chemical-Looping Combustion (iG-CLC) and Chemical Looping with Oxygen Uncoupling (CLOU). Chemical looping is based on using oxygen carriers (e.g., iron oxides, copper oxides, calcium sulfates, etc.) to provide the oxygen for the reaction with the fuel. In order to optimize the overall process performance, it is critical that the properties of the oxygen carriers are well-defined and maintained for their specific purpose during the different stages of the CLC process. One of the critical properties of the oxygen carrier is its oxidation state (e.g., content of Fe 2 O 3 vs. Fe 3 O 4 ) as it affects the fundamental operation of the CLC process. Unfortunately, the ability to make on-line measurements of the oxidation state of oxygen carriers is lacking and new sensors need to be developed. The goal of this project was to evaluate the potential of Raman spectroscopy as a sensor for the on-line analysis of the oxidation state of oxygen carrier particles. Oxygen carrier particles (OCPs) of interest include iron oxides, copper oxides, calcium sulfite, and calcium sulfate, with particle sizes typically less than 0.5 mm diameter. The expected operating conditions of the sensor include OCP temperatures in the range of 800 °C to 1000 °C, and pressures of about 10 atm. We evaluated continuous wave (cw), Quasi cw, pulsed, and time-gated Raman spectroscopy at multiple wavelengths (355 nm, 360 nm, 532 nm, 633 nm, 785 nm). Samples included iron oxides, copper oxides, calcium sulfate, and a custom sample provided by NETL for temperatures beyond 1000 °C. Our findings can be summarized as follows: Calcium sulfate can be detected via cw and pulsed 532 nm Raman spectroscopy at temperatures above 1100 °C. Hematite (Fe 2 O 3 ) Raman spectra can be detected at temperatures of 700 °C via cw 360 nm, 1089 °C with cw 532 nm, 400 °C with cw 633 and 600 °C with cw 785 nm lasers. Magnetite (Fe 3 O 4 ) can be detected via cw 532 nm Raman spectroscopy up to 600 °C. Mixtures of Fe 2 O 3 and Fe 3 O 4 can be distinguished for temperatures up to 600 °C using 532 nm. Copper oxides did not yield suitable signals at elevated temperatures. The custom NETL samples did not yield suitable signals at elevated temperatures. Raman spectroscopy would be a suitable approach for calcium sulfate as this material provides a very strong Raman signal at high temperatures. Oxygen carrier particles of higher interest such as metal oxides, however, do not yield a strong-enough signal at elevated temperatures. As such, Raman spectroscopy is not suitable to differentiate the oxidation state of these materials at temperatures above 600 °C.

01 COAL, LIGNITE, AND PEAT↗

Coal conversion in a fluidized bed chemical looping reactor using a copper-based oxygen carrier

Chemical looping combustion (CLC) of coal presents interesting challenges, particularly with regard to conversion of the solid char that remains after devolatilization. Reaction of solid char with solid oxygen carriers is inefficient, so conventional chemical looping oxygen carriers rely on in-situ gasification of char in the fuel reactor to produce combustible gas. Chemical looping with oxygen uncoupling (CLOU) is a variant of CLC that uses an oxygen carrier that releases gaseous O2 in the fuel reactor, allowing for a rapid reaction with solid fuels. However, even with CLOU, there is competition between consumption of available gaseous and metal bound oxygen by volatiles versus char. This study aims to better understand the mechanisms of coal conversion in a 10 kWth bench-scale fluidized bed reactor system using a copper-based CLOU carrier. Both coal and coal char were evaluated when fuel was fed in small batches. The effect of coal particle size and temperature on the pathway of carbon conversion was evaluated. Smaller coal particles are more effectively converted through the CLOU pathway; however, more particles were entrained with the fluidizing gas and exited the reactor before being fully converted. Larger particles rely primarily on conversion of volatiles and gasification products because the large solid char particles are ineffectively converted by both gaseous oxygen and solid oxygen carrier contact. The advantage of larger coal particles is the decrease in elutriated fuel particles. This paper summarizes the experimental results and discusses the mechanisms of carbon conversion for a CLOU system.

Merrett, Kirsten M.↗

In-situ study of the carbon gasification reaction of highly oriented pyrolytic graphite promoted by cobalt oxides and the novel nanostructures appeared after reaction

Cobalt interaction and its effects on carbon-based systems at the nanoscale have recently attracted much attention in different fields, such as catalysis of carbon nanotubes or graphene and graphite nano-patterning taking advantage of its ferromagnetic behavior. Experiments performed in our laboratories show how the re-oxidation process of two equivalent monolayers of CoO deposited on highly oriented pyrolytic graphite at 400 °C leads to the formation of nanochannels at lower temperature than using other methods. Here we present the in-situ characterization of the carbon gasification reaction that drives this process by means of near ambient pressure X-ray photoelectron spectroscopy performed at the ALBA synchrotron facility. The reason why this reaction takes place at such low temperature compared to other methods is due to the weakening of the carbon σ bonds by the initial CoO wetting layer formed at the early stages of growth on the graphite surface. Besides nanochannels, ex-situ atomic force microscopy measurements also show the appearance of two more kinds of nanostructures: nano-strips and nano-rings. The appearance of these nanostructures reveals the impressive modification of the surface after the re-oxidation process mediated by the cobalt oxide.

36 MATERIALS SCIENCE↗

A Scaling Study of Microbially-Enhanced Methane Production From Coal (Mecbm): Optimizing Nutrient Delivery For Maximized Methane Production

Microbially-enhanced coalbed methane (MECBM) recovery is a novel method to stimulate gas production in CBM reservoirs. We first develop suitable nutrient recipes for native coals from sites each in the Illinois Basin and in the San Juan Basin. The optimal concentrations for statistically significant parameters are identified and the methane yields at laboratory scale are obtained (Part I & II). We then demonstrate the importance of replicating truly in-situ conditions for bio- gasification studies by investigating methane productivity in a core holder simulating in-situ conditions. Based on the experimental results, the resulting gas production correlates positively with the permeability of the samples. We examine the deliverability of engineered microbial solutions to promote coal bioconversion in coals and demonstrate that greater than milli-darcy permeability is required under in-situ stress conditions (Part III). This constraint is supplemented by imaging and a fractal-based characterization approach to evaluate changes in the physical properties of coal due to bio-gasification. High resolution SEM imaging is used to observe swelling of the coal matrix with sub-micron wide continuous pores observed to persist even after microbial treatment (IV). We explore the potential of generating, propping-open and sustaining the functionality of hydraulic fractures in coal using different fracturing fluids (Part V). The alteration of the nano-pore structure due to MECBM treatment is examined by using small angle X-ray scattering (SAXS) to define the in-situ porosity evolution as a proxy to infer permeability evolution (Part VI). Coupled hydro-mechanical and bio-gasification modeling is applied to determine the effectiveness of nutrient delivery by hydraulic fracturing and its field implementation. Compared with both the unstimulated and hydro-shear-dilated cases of the natural fracture network, hydraulic fracturing demonstrates a significant improvement to enhance nutrient delivery. A preliminary analysis of field-scale methane yield is completed with consideration of the combined influence of permeability evolution, solute transport and microbial growth (Part VII). Developing nutrient solutions for Illinois Basin and San Juan Basin (Task 2): To enhance methane release from coal through bio-gasification, suitable nutrient solutions are needed to stimulate microbial activities toward coal depolymerization and conversion to biogas. Specific for bituminous coal in the Illinois basin, a nutrient recipe that can be used to enhance coal bio- gasification in situ is developed. Based on our previous experience working with Illinois coal and the characteristics of the formation water and the indigenous microbial community, four parameters, Fe powder, methanol, ethanol, and trace minerals are optimized through using a Box-Behnken design. The optimal condition predicted by the models is: Fe-powder at 74 mM, methanol at 97.91 mM, ethanol at 100 mM, and trace minerals at 100%. Under these conditions, the predicted methane yield and content is 1,417.35 ft 3 /ton and 80.7%, respectively. These results are then validated by experimental studies. In addition, each added component is evaluated in terms of its contribution to methane generated. Specifically, the role of coal in the bio-gasification process is studied against two other solid materials. Experimental data from different solid matrices prove that coal is indeed degraded by the studied microbial community.

01 COAL, LIGNITE, AND PEAT↗

Best Practices in Underground Coal Gasification

Underground coal gasification (UCG) converts coal in-situ into a gaseous product, commonly known as synthesis gas or syngas through the same chemical reactions that occur in surface gasifiers. Gasification converts hydrocarbons into a synthesis gas (syngas) at elevated pressures and temperatures and can be used to create many products (electric power, chemical feedstock, liquid fuels, hydrogen, synthetic gas). Gasification provides numerous opportunities for pollution control, especially with respect to emissions of sulfur, nitrous oxides, and mercury. UCG could increase the coal resource available for utilization enormously by gasifying otherwise unmineable deep or thin coals under many different geological settings. A 300-400% increase in recoverable coal reserves in the U.S. is possible. For developing countries undergoing rapid economic expansion, including India and China, UCG also may be a particularly compelling technology. UCG has been tested in many different experimental tests in many countries. The U.S. carried out over 30 pilots between 1975 and 1996, testing bituminous, sub-bituminous, and lignite coals. Before that, the Former Soviet Union executed over 50 years of research on UCG, field tests and several commercial projects, including an electric power plant in Angren, Uzbekistan that is still in operation today after 47 years. Since 1991, China has executed at least 16 tests, and has several commercial UCG projects for chemical and fertilizer feedstocks. In 2000, Australia began a large pilot (Chinchilla) which produced syngas for 3 years before a controlled shut-down and controlled restart. As present, multiple commercial projects are in various stages of development in the U.S., Canada, South Africa, India, Australia, New Zealand, and China to produce power, liquid fuels, and synthetic natural gas.

01 COAL, LIGNITE, AND PEAT↗

Microwave-Assisted Co-Gasification of Mixed Plastics and Corn Stover to Produce Clean Hydrogen Using Fe-Based Catalyst

Microwave-assisted gasification is an energy-efficient alternative to conventional gasification in which known feedstocks can be converted into syngas, char, and other byproducts to produce clean hydrogen at lower temperatures (~550 °C) through selective heating. Fe oxides are well-known gasification catalysts that can reduce in-situ to activate the methyl radicals by supplying surface oxygen and promoting H2 formation. This study introduces Fe2O3 as a microwave-active catalyst to enhance H2 production and tar reduction for plastic-corn stover co-gasification. The results found that the microwave reaction at 800 °C produced 24 times more mmol of hydrogen per kWh energy as compared to the conventional run at 900 °C. The X-ray diffraction results show the presence of Fe3O4 and FeO peaks indicating reduction of Fe2O3 to help devolatize reaction intermediates; while the appearance of metallic Fe in the microwave run at 800 °C indicates that Fe2O3 achieves full reduction at the microwave gasification temperature yielding maximum hydrogen production.

Abedin, Ashraf↗

Application of Chemical Looping with Spouting Fluidized Bed for Hydrogen-Rich Syngas Production from Catalytic Coal Gasification

The goal of this final project report is to comprehensively summarize the work conducted in project DE-FE0024000. In accordance with the Statement of Project Objectives (SOPO), the University of Kentucky Center for Applied Energy Research (UKy-CAER) developed a multifaceted particle as a catalyst-oxygen carrier (catalyst-OC) for chemical looping gasification. The project also included the design, fabrication, commissioning and performance evaluation of a novel spouted bed approach to gasifiers in conjunction with chemical looping concepts to significantly reduce the capital cost associated with typical gasification technologies. Specifically, UKy-CAER investigated red mud (RM) with and without Cu additives for catalytic and stability benefits in a bench scale reactor, provided the detailed front-end design of a 50 kWth chemical looping gasification (CLG) plant and completed a 70+ hour long experimental campaign to evaluate the coal feed system and the performance and flexibility of the 50 kWth facility with various coal and OCs. Project results verified UKy-CAER’s proposed approach to catalytic coal gasification technology using a chemical looping process with three reaction zones to provide in-situ separated oxygen for coal partial-combustion (e.g. gasification) with water-gas shift reaction. Central to the project was kinetically facile red mud OC and a spouted bed gasifier configuration that enabled the success of the following operation, performance and economic objectives: (1) Low-temperature gasifier operation (as low as 600°C); (2) Avoidance of ash and OCs aggolmeration; (3) Elimination of methane formation; and (4) Promotion of water-gas shift (WGS) reactions and syngas reforming. The red mud OC is economical and the novel spouted bed reducer shows promise, as summarized in this report, as an effective means for improved plant efficiency with reduced process complexity.

01 COAL, LIGNITE, AND PEAT↗

Final Report: Process Intensification of Hydrogen Production through Sorption-Enhanced Gasification of Biomass

The University of Utah, in partnership with Idaho National Laboratory (INL), evaluated Sorption-Enhanced Gasification (SEG) as a transformative pathway for producing hydrogen with the potential for negative CO 2 emissions. SEG integrates gasification, water-gas shift, and in-situ carbon capture within a dual fluidized bed reactor to enable efficient clean hydrogen production. Key challenges related to biomass variability and process complexity were addressed through feedstock engineering, reaction optimization, and process validation. A co-pelletized biomass–limestone feedstock was developed to simplify feeding and introduction of makeup limestone. Kinetic and sorbent studies identified optimal operating conditions and confirmed the suitability of low-cost limestone, while catalysts were developed to reduce tar formation. Reactor modeling and techno-economic analysis indicated that SEG can achieve competitive hydrogen production costs, particularly when combined with carbon incentives, supporting its potential for scale-up and carbon-negative operation.

08 HYDROGEN↗

Distributed Sensors for Waste Plastics Gasification and Clean Hydrogen Productions

This project developed distributed fiber sensors for plastics gasification reactor for clean hydrogen production. These sensors can be directly inserted into gasification reactors to perform real-time, in-situ hydrogen and temperature profile measurements with 5-cm spatial resolution across the entire reactor chamber. Our research team will use this new sensor capability to study how feedstock mixtures, feedstock preparations, and air/steam flows impact feedstock consumption, hydrogen production, and harmful chemical production emissions.

08 HYDROGEN↗

Microwave-Assisted dry reforming of toluene as a model tar compound using low-cost iron catalyst for syngas clean-up

Gasification of waste feedstock such as biomass, waste plastics suffers from high tar yields during hydrogen-rich syngas production. The presence of tars result in lower quality syngas, lower syngas yields, reactor blockage, reactor down time, and costly maintenance. Therefore, removal of tar from syngas during gasification is essential. Catalytic reforming of tars via in-situ syngas cleanup is an effective way of mitigating tars. This work explores the possibility of microwave-assisted catalytic dry reforming of tars for syngas production. Further, due to its chemical complexity, toluene, which is one of the main tar constituents, could be used as a model tar compound. Toluene dry reforming was studied using the Fe/Al 2 O 3 catalyst under CO 2 under the temperature range of 400–700 °C. The toluene reforming reaction was conducted using microwave and conventional thermal reactors. Under microwave irradiation, CO 2 and toluene conversions are boosted to 80% at 500 °C. Hydrogen and carbon monoxide yields were approximately five times and ten times higher in the microwave reactor at 500 °C, respectively, compared to the productions obtained in the conventional fixed-bed reactor at 700 °C. Filamentous carbon was also produced as a valuable side product to improve the economy of this process and such value-added carbon was only observed in the microwave reactor. Three reaction pathways were observed during microwave reaction: the toluene decomposition produces an initial hydrogen and carbon deposit on the catalyst; the formation of methane and benzene suggests toluene hydrodemethylation as a secondary reaction; and toluene hydrogenolysis forms light alkanes such as methane, and through reforming reaction under CO 2 to syngas.

10 SYNTHETIC FUELS↗

Experimental study on particle formation in a pressurized oxy-fuel combustor using a novel in-situ optical instrument

Particle formation in pressurized oxy-fuel combustion can be fundamentally different from oxy-fuel combustion at atmospheric pressure. Under high pressures, the rate of char gasification with CO2 and H2O increases significantly and dominates the char reactions particularly at high temperatures. Also, the extent of fragmentation varies. This could result in a very different particle size distribution from that of air-fired combustion. To accurately obtain the particle size distribution in a pressurized oxy-fuel combustor without sampling bias, the particle measurement should be made at the system pressure. Very few published studies have accomplished this, and never under the conditions reported herein. In this work, we fire PRB coal in a 100 kWth staged pressurized oxy-fuel combustor (SPOC) under two pressures, 15 and 2 bara. A sampling probe (oil-cooled) is installed at the combustor outlet and the aerosol flow are sampled isokinetically. We utilize a state-of-the-art optical analyzer (Malvern Insitec) with a novel high-pressure and high-temperature flow cell to measure the particle size distribution and concentration in-situ in a sampled flow, which contains moist/corrosive flue gas under the process pressure and a controlled temperature that is kept above the dew point. The results show that the pressure can significantly influence the particle size distribution and concentration from the oxy-fuel combustor.

Cheng, Mao↗

Space Rated High Voltage Plasma Generating Supply

The use of plasma for in-situ resource utilization (ISRU) applications (such as water treatment, acid production, plant seed activation, biofilm sanitization, or waste gasification) is an active area of research at the KSC Applied Chemistry Lab (ACL). The generation of plasma for experimentation has thus far been done with lab-rated power supplies which are unsuitable for space applications, and no suitable supply is readily available for purchase. This project tackled the development of a low TRL prototype 500 W power supply intended for generating plasma in space. The design was based on similar power electronic circuits used for electric propulsion systems and was adapted for use in ISRU applications. This technology will enable KSC’s plasma-based ISRU related technologies to be demonstrated in the space environment.

Nathaniel Cain↗

In-Situ Acoustic Measurements of Temperature Profile in Extreme Environments

A gasifier’s temperature is the primary characteristic that must be monitored to ensure its performance and the longevity of its refractory. One of the key technological challenges impacting the reliability and economics of coal and biomass gasification is the lack of temperature sensors that are capable of providing accurate, reliable, and long-life performance in an extreme gasification environment. This research has proposed, demonstrated, and validated a novel approach that uses a noninvasive ultrasound method that provides real-time temperature distribution monitoring across the refractory, especially the hot face temperature of the refractory. The essential idea of the ultrasound measurements of segmental temperature distribution is to use an ultrasound propagation waveguide across a refractory that has been engineered to contain multiple internal partial reflectors at known locations. When an ultrasound excitation pulse is introduced on the cold side of the refractory, it will be partially reflected from each scatterer in the US propagation path in the refractory wall and returned to the receiver as a train of partial echoes. The temperature in the corresponding segment can be determined based on recorded ultrasonic waveform and experimentally defined relationship between the speed of sound and temperature. The ultrasound measurement method offers a powerful solution to provide continuous real time temperature monitoring for the occasions that conventional thermal, optical and other sensors are infeasible, such as the impossibility of insertion of temperature sensor, harsh environment, unavailable optical path, and more. Our developed ultrasound system consists of an ultrasound engineered waveguide, ultrasound transducer/receiver, and data acquisition, logging, interpretation, and online display system, which is simple to install on the existing units with minimal modification on the gasifier or use with new units. This system has been successfully tested with a 100 kW pilot scale down flow oxyfuel combustor, capturing in real time temperature changes during all relevant combustion process changes. The ultrasound measurements have excellent agreement with thermo- couple measurements, and appear to be more sensitive to temperature changes before the thermocouples response, which is believed to be the first demonstration of ultrasound measurements segmental temperature distribution across refractories.

47 OTHER INSTRUMENTATION↗

In-Situ Resource Utilization for Space Exploration: Resource Processing, Mission-Enabling Technologies, and Lessons for Sustainability on Earth and Beyond

As humanity begins to reach out into the solar system, it has become apparent that supporting a human or robotic presence in transit andor on station requires significant expendable resources including consumables (to support people), fuel, and convenient reliable power. Transporting all necessary expendables is inefficient, inconvenient, costly, and, in the final analysis, a complicating factor for mission planners and a significant source of potential failure modes. Over the past twenty-five years, beginning with the Space Exploration Initiative, researchers at the NASA Glenn Research Center (GRC), academic collaborators, and industrial partners have analyzed, researched, and developed successful solutions for the challenges posed by surviving and even thriving in the resource limited environment(s) presented by near-Earth space and non-terrestrial surface operations. In this retrospective paper, we highlight the efforts of the co-authors in resource simulation and utilization, materials processing and consumable(s) production, power systems and analysis, fuel storage and handling, propulsion systems, and mission operations. As we move forward in our quest to explore space using a resource-optimized approach, it is worthwhile to consider lessons learned relative to efficient utilization of the (comparatively) abundant natural resources and improving the sustainability (and environment) for life on Earth. We reconsider Lunar (and briefly Martian) resource utilization for potential colonization, and discuss next steps moving away from Earth.

Specific impulse↗

Environmental performances of different configurations of a material recovery facility in a life cycle perspective

Highlights: • An attributional LCA assessed the environmental performances of an integrated MRF. • Different configurations of the MRF technological evolution have been analysed. • Reliable data provide a large LCI table for all the configurations and each sub-units. • A biological treatment in-situ improves the potentials of land occupation and global warming. • The inclusion of a small-scale gasifier could improve almost all the environmental potentials. - Abstract: The study evaluated the environmental performances of an integrated material recovery facility (MRF) able to treat 32 kt/y of unsorted mixed waste, made of residuals from household source separation and separate collection. The facility includes a mechanical sorting platform for the production of a solid recovered fuel (SRF) utilized in an external waste-to-energy plant, bio-cells for tunnel composting of organic fraction, and a sanitary landfill for the safe disposal of ultimate waste. All the MRF sub-units have been analysed in depth in order to acquire reliable data for a life cycle assessment study, focused on the environmental performances of different configurations of the facility. The study investigated a “past” configuration, including just mechanical sorting, landfilling and biogas combustion in a gas engine, and the “present” one, which includes also a composting unit. Two possible “future” configurations, having a gasifier inside the MRF battery limits, have been also analysed, assessing the performances of two fluidized bed reactors of different size, able to gasify only the residues generated by the sorting platform or the whole amount of produced SRF, respectively. The analysis evaluated the contributions of each unit in the different configurations and allowed a reliable assessment of the technological evolution of the facility. The results quantified the positive effect of the inclusion of an aerobic treatment of the waste organic fraction. The SRF gasification in situ appears to improve the MRF environmental performances in all the impact categories, with the exclusion of that of global warming.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗