Search NASA⌕ Search

SEARCH · Search NASA

Results for “INDIUM 102”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Nuclear Data Sheets for A = 102

The 1998 evaluation on mass A = 102 (1998De15) has been revised, taking into account all data available before december 2008. Detailed experimental information is presented from the neutron rich nucleus {sup 102}Rb to the neutron deficient {sup 102}Sn nucleus. No information on excited states of {sup 102}Rb is available and very scarce for {sup 102}Sr Especially new (HI,xn{gamma}) data sets for several nuclides have been evaluated and new and more accurate data for {gamma} intensities and multipolarities obtained. For {sup 102}Ru very precise new data of the Budapest (n,{gamma}) collaboration have been included.A new and very elaborated decay scheme for {sup 102}In is obtained. Isomerism in {sup 102}Y and {sup 102}Nb needs further investigation due to conflicting results.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Low-cost electrochemical treatment of indium tin oxide anodes for high-efficiency organic light-emitting diodes

We demonstrate a simple low-cost approach as an alternative to conventional O{sub 2} plasma treatment to modify the surface of indium tin oxide (ITO) anodes for use in organic light-emitting diodes. ITO is functionalized with F{sup −} ions by electrochemical treatment in dilute hydrofluoric acid. An electrode with a work function of 5.2 eV is achieved following fluorination. Using this electrode, a maximum external quantum efficiency of 26.0% (91 cd/A, 102 lm/W) is obtained, which is 12% higher than that of a device using the O{sub 2} plasma-treated ITO. Fluorination also increases the transparency in the near-infrared region.

36 MATERIALS SCIENCE↗

Penning trap mass measurements of {sup 99-109}Cd with the ISOLTRAP mass spectrometer, and implications for the rp process

Penning trap mass measurements of neutron-deficient Cd isotopes {sup 99-109}Cd have been performed with the ISOLTRAP mass spectrometer at ISOLDE/CERN, all with relative mass uncertainties below 3{center_dot}10{sup -8}. A new mass evaluation has been performed. The mass of {sup 99}Cd has been determined for the first time, which extends the region of accurately known mass values toward the doubly magic nucleus {sup 100}Sn. The implication of the results on the reaction path of the rp process in stellar x-ray bursts is discussed. In particular, the uncertainty of the abundance and the overproduction created by the rp-process for the mass A=99 are demonstrated by reducing the uncertainty of the proton-separation energy of {sup 100}InS{sub p}({sup 100}In) by a factor of 2.5.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Comparison of structural and electrical properties of Lu{sub 2}O{sub 3} and Lu{sub 2}TiO{sub 5} gate dielectrics for α-InGaZnO thin-film transistors

We compared the structural properties and electrical characteristics of high-κ Lu{sub 2}O{sub 3} and Lu{sub 2}TiO{sub 5} gate dielectrics for amorphous indium-gallium-zinc oxide (α-InGaZnO) thin-film transistor (TFT) applications. The Lu{sub 2}O{sub 3} film has a strong Lu{sub 2}O{sub 3} (400) peak in the X-ray diffraction pattern, while the Lu{sub 2}TiO{sub 5} sample shows a relatively weak Lu{sub 2}TiO{sub 5} (102) peak. Atomic force microscopy reveals that the Lu{sub 2}O{sub 3} dielectric exhibits a rougher surface (about three times) than Lu{sub 2}TiO{sub 5} one. In X-ray photoelectron spectroscopy analysis, we found that the intensity of the O 1s peak corresponding to Lu(OH){sub x} for Lu{sub 2}O{sub 3} film was higher than that of Lu{sub 2}TiO{sub 5} film. Furthermore, compared with the Lu{sub 2}O{sub 3} dielectric, the α-InGaZnO TFT using the Lu{sub 2}TiO{sub 5} gate dielectric exhibited a lower threshold voltage (from 0.43 to 0.25 V), a higher I{sub on}/I{sub off} current ratio (from 3.5 × 10{sup 6} to 1.3 × 10{sup 8}), a smaller subthreshold swing (from 276 to 130 mV/decade), and a larger field-effect mobility (from 14.5 to 24.4 cm{sup 2}/V s). These results are probably due to the incorporation of TiO{sub x} into the Lu{sub 2}O{sub 3} film to form a Lu{sub 2}TiO{sub 5} structure featuring a smooth surface, a low moisture absorption, a high dielectric constant, and a low interface state density at the oxide/channel interface. Furthermore, the stability of Lu{sub 2}O{sub 3} and Lu{sub 2}TiO{sub 5} α-InGaZnO TFTs was investigated under positive gate-bias stress (PGBS) and negative gate-bias stress (NGBS). The threshold voltage of the TFT performed under NGBS is more degradation than that under PGBS. This behavior may be attributed to the electron charge trapping at the dielectric–channel interface under PGBS, whereas the oxygen vacancies occurred in the InGaZnO under NGBS.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controlling Nucleation and Crystal Growth of Ge in a Liquid Metal Solvent

In this work, the electrochemical liquid–liquid–solid (ec-LLS) deposition of crystalline germanium (Ge) in a eutectic mixture of liquid gallium (Ga) and indium (In) was analyzed as a function of liquid metal thickness, process temperature, and flux. Through control of reaction parameters, conditions were identified that allow selective nucleation and growth of crystalline Ge at the interface between e-GaIn and a crystalline Si substrate. The crystal growth rates of Ge by ec-LLS as a function of process temperatures were obtained from time-dependent powder X-ray diffraction measurements of crystalline Ge. The driving force, Δμ, for crystal formation in ec-LLS was estimated through analyses of the experimental data in conjunction with predictions from a finite-difference model. The required Δμ for Ge nucleation was tantamount to a supersaturation approximately 102 larger than the equilibrium concentration of Ge in e-GaIn at the investigated temperatures. These points are discussed both in the context of advancing new, low-temperature synthetic methodologies for crystalline semiconductor films and on understanding semiconductor crystal growth more deeply.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-accuracy coupled cluster calculations of atomic properties

The four-component Fock-space coupled cluster and intermediate Hamiltonian methods are implemented to evaluate atomic properties. The latter include the spectra of nobelium and lawrencium (elements 102 and 103) in the range 20000-30000 cm{sup −1}, the polarizabilities of elements 112-114 and 118, required for estimating their adsorption enthalpies on surfaces used to separate them in accelerators, and the nuclear quadrupole moments of some heavy atoms. The calculations on superheavy elements are supported by the very good agreement with experiment obtained for the lighter homologues.

74 ATOMIC AND MOLECULAR PHYSICS↗

Time-dependent of characteristics of Cu/CuS/n-GaAs/In structure produced by SILAR method

Highlights: • The CuS thin film used at Cu/n-GaAs structure is grown by SILAR method. • There has been no report on ageing of characteristics of this junction in the literature. • The properties of Cu/CuS/n-GaAs/In structure are examined with different methods. • It has been shown that Cu/CuS/n-GaAs/In structure has a stable interface. - Abstract: The aim of this study is to explain effects of the ageing on the electrical properties of Cu/n-GaAs Shottky barrier diode with Copper Sulphide (CuS) interfacial layer. CuS thin films are deposited on n-type GaAs substrate by Successive Ionic Layer Adsorption and Reaction (SILAR) method at room temperature. The structural and the morphological properties of the films have been carried out by Scanning Electron Microscopy (SEM) and X-Ray Diffraction (XRD) techniques. The XRD analysis of as-grown films showed the single-phase covellite, with hexagonal crystal structure built around two preferred orientations corresponding to (102) and (108) atomic planes. The ageing effects on the electrical properties of Cu/CuS/n-GaAs/In structure have been investigated. The current–voltage (I–V) measurements at room temperature have been carried out to study the change in electrical characteristics of the devices as a function of ageing time. The main electrical parameters, such as ideality factor (n), barrier height (Φ{sub b}), series resistance (R{sub s}), leakage current (I{sub 0}), and interface states (N{sub ss}) for this structure have been calculated. The results show that the main electrical parameters of device remained virtually unchanged.

36 MATERIALS SCIENCE↗

Amphoteric Indium Enables Carrier Engineering to Enhance the Power Factor and Thermoelectric Performance in n -Type Ag n Pb 100 In n Te 100+2 n (LIST)

The Ag and In co-doped PbTe, Ag n Pb 100 In n Te 100+2n (LIST), exhibits n-type behavior and features unique inherent electronic levels that induce self-tuning carrier density. Results show that In is amphoteric in the LIST, forming both In 3+ and In 1+ centers. Through unique interplay of valence fluctuations in the In centers and conduction band filling, the electron carrier density can be increased from ≈3.1 × 10 18 cm -3 at 323 K to ≈2.4 × 10 19 cm -3 at 820 K, leading to large power factors peaking at ≈16.0 μWcm -1 K -2 at 873 K. The lone pair of electrons from In + can be thermally continuously promoted into the conduction band forming In 3+ , consistent with the amphoteric character of In. Moreover, with rising temperature, the Fermi level shifts into the conduction band, which enlarges the optical band gap based on the Moss–Burstein effect, and reduces bipolar diffusion and thermal conductivity. Adding extra Ag in LIST improves the electrical transport properties and meanwhile lowers the lattice thermal conductivity to ≈0.40 Wm -1 K -1 . Here, the addition of Ag creates spindle-shaped Ag 2 Te nanoprecipitates and atomic-scale interstitials that scatter a broader set of phonons. As a result, a maximum ZT value ≈1.5 at 873 K is achieved in Ag 6 Pb 100 InTe 102 (LIST).

36 MATERIALS SCIENCE↗

Comparative Studies of AlGaAs/InGaAs Enhancement/Depletion-Mode High Electron Mobility Transistors with Virtual Channel Layers by Hybrid Gate Recesses Approaches

Unlike the conventional GaAs- and InP-based enhancement/depletion-mode (E/D-mode) transistors, the improved gate characteristics of the AlGaAs/InGaAs E-mode high electron mobility transistors (HEMTs) by way of hybrid gate recesses to remove the n-AlAs/i-GaAs/n-AlGaAs virtual channel layers upon 2DEG channels are demonstrated. As compared to the D-mode device (sample A), the gate reverse currents are effectively reduced by 45 and 102 times for the E-mode devices with additional gate recess time of 24 s (sample B) and 30 s (sample C) to remove part of the virtual channel layers, respectively. Under gate forward bias, the hybrid gate recesses also enable the gate turn-on voltages to increase. Furthermore, the threshold voltages of –1.25, 0.09, and 0.22 V are observed in the samples A, B, and C, respectively. The maximum transconductances of 187.3, 209.2, and 243.4 mS/mm and saturation current density of 482.8, 410.6, and 347.4 mA/mm are obtained in the samples A, B, and C, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nano-crystallization in ZnO-doped In{sub 2}O{sub 3} thin films via excimer laser annealing for thin-film transistors

In a previous work, we reported the high field effect mobility of ZnO-doped In{sub 2}O{sub 3} (IZO) thin film transistors (TFTs) irradiated by excimer laser annealing (ELA) [M. Fujii et al., Appl. Phys. Lett. 102, 122107 (2013)]. However, a deeper understanding of the effect of ELA on the IZO film characteristics based on crystallinity, carrier concentrations, and optical properties is needed to control localized carrier concentrations for fabricating self-aligned structures in the same oxide film and to adequately explain the physical characteristics. In the case of as-deposited IZO film used as the channel, a high carrier concentration due to a high density of oxygen vacancies was observed; such a film does not show the required TFT characteristics but can act as a conductive film. We achieved a decrease in the carrier concentration of IZO films by crystallization using ELA. This means that ELA can form localized conductive or semi-conductive areas on the IZO film. We confirmed that the reason for the carrier concentration decrease was the decrease of oxygen-deficient regions and film crystallization. The annealed IZO films showed nano-crystalline phase, and the temperature at the substrate was substantially less than the temperature limit for flexible films such as plastic, which is 50°C. This paves the way for the formation of self-aligned structures and separately formed conductive and semi-conductive regions in the same oxide film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗