Search NASA⌕ Search

SEARCH · Search NASA

Results for “INDIUM 105”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Nuclear Data Sheets for A=105☆

This work presents new evaluation of A=105 nuclear structure and decay data. It covers a range of nuclei from the very neutron-rich {sup 105}{sub 38}Sr to the extremely neutron-deficient {sup 105}{sub 52}Te, known also to be the doughter of the lightest alpha decaying nucleus {sup 109}I. The work is based on experimental studies performed in the last 73 years, where A=105 nuclei were produced in particle transfer, fusion/evaporation reactions, sponataneus and induced fission, fusion and fragmentation of relativistic beams, radioactive decay etc.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Solvothermal syntheses and structures of indium(III)-binaphthalenyl dicarboxylate complexes with yellow/blue luminescence

Two novel In(III) complexes, [In(bna)(Hbna)]{sub n} (1) and [In{sub 2}(bna){sub 2}(mu{sub 2}-OH){sub 2}]{sub n}.4nH{sub 2}O (2) (H{sub 2}bna=2,2'-dihydroxy-1,1'-binaphthyl-3,3'-dicarboxylate acid), have been reported. Complex 1 adopts a 2D layer structure, where each layer composed from homochiral ligands is chiral while the ligands in two neighboring layers are enantiomer. Complex 2 is constructed by individual -In-O-In- chains, which are further connected by bna{sup 2-} into a 3D honeycomb framework. As a derivative of H{sub 2}bna ligand, dmbna (3) was recrystallized for structurally comparison with 1-2 (dmbna=dimethyl 2,2'-dihydroxy-1,1'-binaphthyl-3,3'-dicarboxylate). X-ray powder diffractions (XRD) and thermogravimetric analyses (TGA) for 1-2 show that they are highly thermally stable in the solid state. Complexes 1 and 2 exhibit the intense yellow luminescence at 573 nm and blue luminescence at 459 nm at room temperature, respectively. And an astonishing blue shift of 105 nm is observed for complex 1 when it is measured at 10 K. - Graphical abstract: Two indium(III)-bna compounds were solvothermally synthesized. 1 adopts an unprecedented 2D chiral layer. 2 is constructed by -In-O-In- chains, which are further connected by bna{sup 2-} into a 3D honeycomb framework.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Penning trap mass measurements of {sup 99-109}Cd with the ISOLTRAP mass spectrometer, and implications for the rp process

Penning trap mass measurements of neutron-deficient Cd isotopes {sup 99-109}Cd have been performed with the ISOLTRAP mass spectrometer at ISOLDE/CERN, all with relative mass uncertainties below 3{center_dot}10{sup -8}. A new mass evaluation has been performed. The mass of {sup 99}Cd has been determined for the first time, which extends the region of accurately known mass values toward the doubly magic nucleus {sup 100}Sn. The implication of the results on the reaction path of the rp process in stellar x-ray bursts is discussed. In particular, the uncertainty of the abundance and the overproduction created by the rp-process for the mass A=99 are demonstrated by reducing the uncertainty of the proton-separation energy of {sup 100}InS{sub p}({sup 100}In) by a factor of 2.5.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Growth of TiO{sub 2} Thin Film on Various Substrates using RF Magnetron Sputtering

The conductivity of Titanium Dioxide (TiO{sub 2}) thin film fabricated using Radio Frequency (RF) Magnetron Sputtering on Silicon (Si), Indium doped--Tin Oxide (ITO) and microscope glass (M) substrates is presented in this paper. The dependant of thin film thickness and type of substrate been discussed. TiO{sub 2} was deposited using Ti target in Ar+O{sub 2}(45:10) mixture at 250 W for 45, 60, 75, 90, 105 and 120 minute. Resultant thickness varies from 295 nm to 724 nm with deposition rate 6.4 nm/min. On the other hand, resistivity, Rs value for ITO substrate is between 5.72x10{sup -7} to 1.54x10{sup -6{Omega}}.m, Si substrate range is between 3.52x10{sup -6} to 1.76x10{sup -5{Omega}}.m and M substrate range is between 99 to 332 {Omega}.m. The value of resistivity increases with the thickness of the thin film.

36 MATERIALS SCIENCE↗

Temperature characteristics of epitaxially grown InAs quantum dot micro-disk lasers on silicon for on-chip light sources

Temperature characteristics of optically pumped micro-disk lasers (MDLs) incorporating InAs quantum dot active regions are investigated for on-chip light sources. The InAs quantum dot MDLs were grown on V-groove patterned (001) silicon, fully compatible with the prevailing complementary metal oxide-semiconductor technology. By combining the high-quality whispering gallery modes and 3D confinement of injected carriers in quantum dot micro-disk structures, we achieved lasing operation from 10 K up to room temperature under continuous optical pumping. Temperature dependences of the threshold, lasing wavelength, slope efficiency, and mode linewidth are examined. An excellent characteristic temperature T{sub o} of 105 K has been extracted.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bulk and surface characterization of In2O3(001) single crystal

A comprehensive bulk and surface investigation of high-quality In2O3(001) single crystals is reported. The transparent-yellow, cube-shaped single crystals were grown using the flux method. ICP-MS measurements reveal small residues of Pb, Mg and Pt in the crystals. Four-point-probe measurements show a resistivity of 2 0.5 105 cm, which translates into a carrier concentration of 1012 cm-3. The results from X-ray diffraction (XRD) measurements revise the lattice constant to 10.1150(5) from the previously accepted value of 10.117 . Scanning Tunneling Microscopy (STM) images of a reduced (sputtered/annealed) surface show a step height of 5 , which indicates a preference for one type of surface termination. A combination of low-energy ion scattering (LEIS) and atomically resolved STM indicates an indium-terminated surface with small islands of 2.5 height, which corresponds to a strongly distorted indium lattice. Scanning Tunneling Spectroscopy (STS) reveals a pronounced surface state at the Fermi Level (EF). Photoelectron Spectroscopy (PES) shows additional, deep-lying band gap states, which can be removed by exposure of the surface to activated oxygen. Oxidation also results in a shoulder at the O 1s core level at a higher binding energy, possibly indicative of a surface peroxide species. A downward band bending of 0.4 eV and an upward band bending of ~0.1 eV is observed for the reduced and oxidized surfaces, respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Transparent Conductors from Carbon Nanotubes LBL-Assembled with Polymer Dopant with π-π Electron Transfer

Single-walled carbon nanotube (SWNT) and other carbon-based coatings are being considered as replacements for indium tin oxide (ITO). The problems of transparent conductors (TCs) coatings from SWNT and similar materials include poor mechanical properties, high roughness, low temperature resilience, and fast loss of conductivity. The simultaneous realization of these desirable characteristics can be achieved using high structural control of layer-by-layer (LBL) deposition, which is demonstrated by the assembly of hydroethyl cellulose (HOCS) and sulfonated polyetheretherketone (SPEEK)-SWNTs. A new type of SWNT doping based on electron transfer from valence bands of nanotubes to unoccupied levels of SPEEK through π-π interactions was identified for this system. It leads to a conductivity of 1.1 × 105 S/m at 66 wt % loadings of SWNT. This is better than other polymer/SWNT composites and translates into surface conductivity of 920 Ω/⟂ and transmittance of 86.7% at 550 nm. The prepared LBL films also revealed unusually high temperature resilience up to 500 °C, and low roughness of 3.5 nm (ITO glass -2.4 nm). Tensile modulus, ultimate strength, and toughness of such coatings are 13 ± 2 GPa, 366 ± 35 MPa, and 8 ± 3 kJ/m3, respectively, and exceed corresponding parameters of all similar TCs. The cumulative figure of merit, ΠTC, which included the critical failure strain relevant for flexible electronics, was ΠTC = 0.022 and should be compared to ΠTC = 0.006 for commercial ITO. Further optimization is possible using stratified nanoscale coatings and improved doping from the macromolecular LBL components.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High performance tunnel injection quantum dot comb laser

A high-speed multiwavelength quantum dot comb laser, grown by molecular beam epitaxy, is demonstrated. The device is characterized with a 75.9 nm (full width at half maximum) and a 91.4 nm (DELTA{sub -15dB}) wide lasing spectrum. There are 105 and 185 simultaneously emitted longitudinal modes with a maximum channel intensity nonuniformity of less than 3 dB in the spectral range of 1231-1252 nm and 1274-1311 nm, respectively, for a laser with 1040 mum cavity length. The channel spacing can be tuned with cavity length and remains invariant in the temperature range of 300-323 K. The small signal modulation bandwidth is 7.5 GHz.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Experimental study of {Delta}I=1 bands in {sup 111}In

The two {Delta}I=1 bands in {sup 111}In, built upon the 3461.0 and 4931.8 keV states, have been studied. The bands were populated in the reaction {sup 100}Mo({sup 19}F, {alpha}4n{gamma}) at a beam energy of 105 MeV. Mean lifetimes of nine states, four in the first and five in the second band, have been determined for the first time from Doppler shift attenuation data. The deduced B(M1) rates and their behavior as a function of level spin support the interpretation of these bands within the framework of the shears mechanism. The geometrical model of Machiavelli et al. has been used to derive the effective gyromagnetic ratios for the two bands.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗