Search NASA⌕ Search

SEARCH · Search NASA

Results for “INFRARED RADIANCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

A cloud detection algorithm using the downwelling infrared radiance measured by an infrared pyrometer of the ground-based microwave radiometer

For better utilization of the ground-based microwave radiometer, it is important to detect the cloud presence in the measured data. Here, we introduce a simple and fast cloud detection algorithm by using the optical characteristics of the clouds in the infrared atmospheric window region. The new algorithm utilizes the brightness temperature (Tb) measured by an infrared radiometer installed on top of a microwave radiometer. The two-step algorithm consists of a spectral test followed by a temporal test. The measured Tb is first compared with a predicted clear-sky Tb obtained by an empirical formula as a function of surface air temperature and water vapor pressure. For the temporal test, the temporal variability of the measured Tb during one minute compares with a dynamic threshold value, representing the variability of clear-sky conditions. It is designated as cloud-free data only when both the spectral and temporal tests confirm cloud-free data. Overall, most of the thick and uniform clouds are successfully detected by the spectral test, while the broken and fast-varying clouds are detected by the temporal test. The algorithm is validated by comparison with the collocated ceilometer data for six months, from January to June 2013. The overall proportion of correctness is about 88.3% and the probability of detection is 90.8%, which are comparable with or better than those of previous similar approaches. Two thirds of discrepancies occur when the new algorithm detects clouds while the ceilometer does not, resulting in different values of the probability of detection with different cloud-base altitude, 93.8, 90.3, and 82.8% for low, mid, and high clouds, respectively. Finally, due to the characteristics of the spectral range, the new algorithm is found to be insensitive to the presence of inversion layers.

14 SOLAR ENERGY↗

The angular distribution of infrared radiances emerging from broken fields of cumulus clouds

Infrared radiances were simultaneously measured from broken cloud fields over the eastern Pacific Ocean by means of the eastern and western geostationary satellites. The measurements were compared with the results of models that characterized the clouds as black circular cylinders disposed randomly on a plane and as black cuboids disposed in regular and in shifted periodic arrays. The data were also compared with the results obtained from a radiative transfer model that considered emission and scattering by a regular array of periodic cuboidal clouds. It was found that the radiances did not depend significantly on the azimuth angle; this suggested that the observed cloud fields were not regular periodic arrays. However, the dependence on zenith angle suggested that the clouds were not disposed randomly either. The implication of these measurements on the understanding of the transfer of infrared radiances through broken cloud fields is considered.

Naber, P. S.↗

Process of preparing metal parts to be heated by means of infrared radiance

A method for preparing metal for heating by infrared radiance to enable uniform and consistent heating. The surface of one or more metal parts, such as aluminum or aluminum alloy parts, is treated to alter the surface finish to affect the reflectivity of the surface. The surface reflectivity is evaluated, such as by taking measurements at one or more points on the surface, to determine if a desired reflectivity has been achieved. The treating and measuring are performed until the measuring indicates that the desired reflectivity has been achieved. Once the treating has altered the surface finish to achieve the desired reflectivity, the metal part may then be exposed to infrared radiance to heat the metal part to a desired temperature, and that heating will be substantially consistent throughout by virtue of the desired reflectivity.

36 MATERIALS SCIENCE↗

Assimilation of Hyperspectral Infrared Radiances from the Cloud-Clearing Methodology: Results from the 2017 Atlantic Tropical Cyclone Season

Assimilation of cloud-affected radiances has the potential to dramatically improve numerical weather prediction systems, as has already been widely shown by use of all-sky microwave radiances. Assimilation of cloudy infrared (IR) radiances, however, lags far behind and only clear-sky radiances are used operationally, leaving data voids in dynamically sensitive areas, such as around tropical cyclones. This team has previously shown the positive benefit of assimilating cloud-cleared IR radiances from hyperspectral sensors (CCRs) and in this work applies the cloud-clearing methodology to generate fully customizable CCRs using an algorithm designed to be portable and reduce latency. These data are successfully assimilated in the Goddard Earth Observing System (GEOS) data assimilation system (DAS) for the 2017 Atlantic Hurricane season.

E L Mcgrath-Spangler↗

Evaluation of upwelling infrared radiance in a nonequilibrium nonhomogeneous atmosphere

The influence of vibrational nonequilibrium upon upwelling infrared radiance from the earth's atmosphere is investigated. By employing the line-by-line model for spectral absorption, heating rates and upwelling radiances are calculated for equilibrium and nonequilibrium conditions in the spectral range of 4.7 micron CO and 3.3 micron CH4 bands. Heating rates are calculated also for the 15 micron CO2 band and are compared with other available results in the literature. For the spectral range of the CO fundamental band, the influence of different parameters on the upwelling radiance is investigated. It is found that for CO the assumption of local thermodynamic equilibrium (LTE) is not justified at tropospheric temperatures and pressures. If the resonance effects of CO-N2 collisions are considered, then the assumption of LTE is justified up to 60 kilometers. This information is very useful for measurement of atmospheric pollutants, earth radiation budget studies and climate modeling, and infrared signature works.

Tiwari, S. N.↗

A comparative study of infrared radiance measurements by an ER-2 based radiometer and the LANDSAT 5 Thematic Mapper (TM-6)

Infrared radiance measurements were acquired from a radiometer on the NASA ER-2 during a coincident LANDSAT 5 overpass on 28 Oct. 1986 as part of the FIRE Cirrus IFO in the vicinity of Lake Michigan. A comparative study is made to infer microphysical properties of the cirrus cloud field. Radiances are derived from the image by convolving the ER-2 radiometer's effective field of view along the flight path. A multistream radiative transfer model is used to account for the differences in spectral bandwidths, 10.40 to 12.50 microns for the LANDSAT band and 9.90 to 10.87 microns for the radiometer.

Hammer, Philip D.↗

Advances Towards Ingestion of Multi-Instrument Cloud-Cleared Infrared Radiances in a Global Data Assimilation and Forecast Framework

The progress towards the assimilation of hyperspectral infrared radiances affected by clouds in the NASA GEOS system is presented. After positive published results describing the assimilation of adaptively thinned AIRS cloud-cleared radiances in the 3DVAR GEOS, this team has then successfully tested adaptively thinned CrIS and IASI data as well, and then moved to assimilation in a hybrid 4DEnVAR configuration. The latest effort is focused on the creation of a portable, customizable version of the cloud-clearing algorithm that is being tailored for the hybrid 4DEnVAR system.

Reale, Oreste↗

Time-cumulated visible and infrared radiance histograms used as descriptors of surface and cloud variations

The spatial and temporal stability of the distributions of satellite-measured visible and infrared radiances, caused by variations in clouds and surfaces, are investigated using bidimensional and monodimensional histograms and time-composite images. Similar analysis of the histograms of the original and time-composite images provides separation of the contributions of the space and time variations to the total variations. The variability of both the surfaces and clouds is found to be larger at scales much larger than the minimum resolved by satellite imagery. This study shows that the shapes of these histograms are distinctive characteristics of the different climate regimes and that particular attributes of these histograms can be related to several general, though not universal, properties of clouds and surface variations at regional and synoptic scales. There are also significant exceptions to these relationships in particular climate regimes. The characteristics of these radiance histograms provide a stable well defined descriptor of the cloud and surface properties.

Seze, Genevieve↗

Physical Retrieval of Surface Emissivity Spectrum from Hyperspectral Infrared Radiances

Retrieval of temperature, moisture profiles and surface skin temperature from hyperspectral infrared (IR) radiances requires spectral information about the surface emissivity. Using constant or inaccurate surface emissivities typically results in large retrieval errors, particularly over semi-arid or arid areas where the variation in emissivity spectrum is large both spectrally and spatially. In this study, a physically based algorithm has been developed to retrieve a hyperspectral IR emissivity spectrum simultaneously with the temperature and moisture profiles, as well as the surface skin temperature. To make the solution stable and efficient, the hyperspectral emissivity spectrum is represented by eigenvectors, derived from the laboratory measured hyperspectral emissivity database, in the retrieval process. Experience with AIRS (Atmospheric InfraRed Sounder) radiances shows that a simultaneous retrieval of the emissivity spectrum and the sounding improves the surface skin temperature as well as temperature and moisture profiles, particularly in the near surface layer.

Li, Jun↗

Measurement of evapotranspiration with combined reflective and thermal infrared radiance observations

The broad goal of the research summarized in this report was 'To facilitate the evaluation of regional evapotranspiration (ET) through the combined use of solar reflective and thermal infrared radiance observations.' The specific objectives stated by Goward and Hope (1986) were to: (1) investigate the nature of the relationship between surface temperature (T(sub S)) and the normalized difference vegetation index (NDVI) and develop an understanding of this relationship in terms of energy exchange processes, particularly latent flux heat (LE); (2) develop procedures to estimate large area LE using combined T(sub S) and NDVI observations obtained from AVHRR data; and (3) determine whether measurements derived from satellite observations relate directly to measurements made at the surface or from aircraft platforms. Both empirical and modeling studies were used to develop an understanding of the T(sub S)-NDVI relationship. Most of the modeling was based on the Tergra model as originally proposed by Goward. This model, and modified versions developed in this project, simulates the flows of water and energy in the soil-plant-atmosphere system using meteorological, soil and vegetation inputs. Model outputs are the diurnal course of soil moisture, T(sub S), LE and the other individual components of the surface energy balance.

Hope, Allen S.↗

Using Multi-Sensor Aerosol Optical Depth Retrievals to Improve Infrared Radiance Assimilation

Coarse dust aerosols absorb terrestrial radiation leading to significant longwave heating/cooling rates. Modules accounting for aerosol impacts on radiation have been implemented into CRTM framework, but operational centers continue to assume aerosol-free conditions when assimilating infrared radiances into NWP models. This assumption can introduce significant biases in analysis fields (temp, moisture, etc.), which can reduce forecast skill.

Naeger, Aaron↗

The Potential Benefits of Handling Mixture Statistics via a Bi-Gaussian EnKF: Tests With All-Sky Satellite Infrared Radiances

The meteorological characteristics of cloudy atmospheric columns can be very different from their clear counterparts. Thus, when a forecast ensemble is uncertain about the presence/absence of clouds at a specific atmospheric column (i.e., some members are clear while others are cloudy), that column's ensemble statistics will contain a mixture of clear and cloudy statistics. Such mixtures are inconsistent with the ensemble data assimilation algorithms currently used in numerical weather prediction. Hence, ensemble data assimilation algorithms that can handle such mixtures can potentially outperform currently used algorithms. In this study, we demonstrate the potential benefits of addressing such mixtures through a bi-Gaussian extension of the ensemble Kalman filter (BGEnKF). The BGEnKF is compared against the commonly used ensemble Kalman filter (EnKF) using perfect model observing system simulated experiments (OSSEs) with a realistic weather model (the Weather Research and Forecast model). Synthetic all-sky infrared radiance observations are assimilated in this study. In these OSSEs, the BGEnKF outperforms the EnKF in terms of the horizontal wind components, temperature, specific humidity, and simulated upper tropospheric water vapor channel infrared brightness temperatures. This study is one of the first to demonstrate the potential of a Gaussian mixture model EnKF with a realistic weather model. Our results thus motivate future research toward improving numerical Earth system predictions though explicitly handling mixture statistics.

54 ENVIRONMENTAL SCIENCES↗

The Impact of All-Sky Hyperspectral Infrared Radiance Assimilation on the Simulation and Forecast of Hurricane Sally in GEOS

Hyperspectral infrared (IR) radiance observations have been one of the major data sources assimilated in the data assimilation system over the last 20 years. However, observations peaking in the lower and mid-troposphere are underutilized in clear-sky radiance data assimilation as the quality control procedure removes a significant portion of cloud-affected observations from the assimilation. To include these cloud-affected observations, one approach is to assimilate them directly under all-sky conditions. The framework for all-sky assimilation of hyperspectral IR radiance observations has been developed in GEOS. The preliminary evaluation of simulated cloud-affected IR observations has been conducted, along with the corresponding sensitivities with respect to all hydrometeors. The symmetric cloud effect has been used as a cloud proxy in the observation error modeling, providing a balanced representation that mitigates the discrepancies between observations and model simulations for IR all-sky assimilation. The observation errors vary for different cloud conditions and have been modeled as cloud amount dependent and inter-channel correlated. Preliminary evaluation of model simulations for IR all-sky assimilation indicates that the simulated brightness temperature tends to have broader structures and lacks small-scale details. Excessive clouds generated by the model are also observed. To address this issue, Hurricane Sally (2020), which formed near the Bahamas, is used as a case study. Several cloud overlap schemes and cloud lookup tables (LUTs), along with other important aspects of all-sky IR radiance assimilation, will be evaluated and tested, aiming to improve the impact on Hurricane Sally's simulation and forecast.

Wei Gu↗

Simulations of Infrared Radiances Over a Deep Convective Cloud System Observed During TC4- Potential for Enhancing Nocturnal Ice Cloud Retrievals

Retrievals of ice cloud properties using infrared measurements at 3.7, 6.7, 7.3, 8.5, 10.8, and 12.0 microns can provide consistent results regardless of solar illumination, but are limited to cloud optical thicknesses tau < approx.6. This paper investigates the variations in radiances at these wavelengths over a deep convective cloud system for their potential to extend retrievals of tau and ice particle size D(sub e) to optically thick clouds. Measurements from the Moderate Resolution Imaging Spectroradiometer Airborne Simulator--ASTER, the Scanning High-resolution Interferometer Sounder, the Cloud Physics Lidar (CPL), and the Cloud Radar System (CRS) aboard the NASA ER-2 aircraft during the NASA TC4 (Tropical Composition, Cloud and Climate Coupling) experiment flight during 5 August 2007, are used to examine the retrieval capabilities of infrared radiances over optically thick ice clouds. Simulations based on coincident in-situ measurements and combined cloud tau from CRS and CPL measurements are comparable to the observations. They reveal that brightness temperatures at these bands and their differences (BTD) are sensitive to tau up to approx.20 and that for ice clouds having tau > 20, the 3.7 - 10.8 microns and 3.7 - 6.7 microns BTDs are the most sensitive to D(sub e). Satellite imagery appears consistent with these results. Keywords: clouds; optical depth; particle size; satellite; TC4; multispectral thermal infrared

CRS and CPL↗

Simulations of Infrared Radiances Over a Deep Convective Cloud System Observed During TC4: Potential for Enhancing Nocturnal Ice Cloud Retrievals

Retrievals of ice cloud properties using infrared measurements at 3.7, 6.7, 7.3, 8.5, 10.8, and 12.0 microns can provide consistent results regardless of solar illumination, but are limited to cloud optical thicknesses tau < approx.6. This paper investigates the variations in radiances at these wavelengths over a deep convective cloud system for their potential to extend retrievals of tau and ice particle size D(sub e) to optically thick clouds. Measurements from the Moderate Resolution Imaging Spectroradiometer Airborne Simulator--ASTER, the Scanning High-resolution Interferometer Sounder, the Cloud Physics Lidar (CPL), and the Cloud Radar System (CRS) aboard the NASA ER-2 aircraft during the NASA TC4 (Tropical Composition, Cloud and Climate Coupling) experiment flight during 5 August 2007, are used to examine the retrieval capabilities of infrared radiances over optically thick ice clouds. Simulations based on coincident in-situ measurements and combined cloud tau from CRS and CPL measurements are comparable to the observations. They reveal that brightness temperatures at these bands and their differences (BTD) are sensitive to tau up to approx.20 and that for ice clouds having tau > 20, the 3.7 - 10.8 microns and 3.7 - 6.7 microns BTDs are the most sensitive to D(sub e). Satellite imagery appears consistent with these results. Keywords: clouds; optical depth; particle size; satellite; TC4; multispectral thermal infrared

Minnis, Patrick↗

The effect of local advection on the inference of soil moisture from thermal infrared radiances

The degree to which the GOES-VISSR infrared data can be used to infer area-averaged soil moisture is explored for a five-day case study period. Chosen variables are transformed and incorporated into a multiple linear regression. The actual observations, rather than a simplified model, are used to determine the relationship between soil moisture and GOES-IR radiance. It is shown that a depletion coefficient of 0.92 produces an index of ground truth which is best correlated with soil moisture as inferred from GOES thermal infrared data. When all individual daily soil estimates during the case study period are averaged at each point and compared to the average observed soil moisture, the data correlate at 0.85. This implies that the algorithm can distinguish at least four categories of soil moisture.

Wetzel, Peter J.↗