Search NASA⌕ Search

SEARCH · Search NASA

Results for “INTERSTITIAL HYDROGEN GENERATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 19 records

The discovery of cometary activity in near-Earth asteroid (3552) Don Quixote

The near-Earth object (NEO) population, which mainly consists of fragments from collisions between asteroids in the main asteroid belt, is thought to include contributions from short-period comets as well. One of the most promising NEO candidates for a cometary origin is near-Earth asteroid (3552) Don Quixote, which has never been reported to show activity. Here we present the discovery of cometary activity in Don Quixote based on thermal-infrared observations made with the Spitzer Space Telescope in its 3.6 and 4.5 μm bands. Our observations clearly show the presence of a coma and a tail in the 4.5 μm but not in the 3.6 μm band, which is consistent with molecular band emission from CO{sub 2}. Thermal modeling of the combined photometric data on Don Quixote reveals a diameter of 18.4{sub −0.4}{sup +0.3} km and an albedo of 0.03{sub −0.01}{sup +0.02}, which confirms Don Quixote to be the third-largest known NEO. We derive an upper limit on the dust production rate of 1.9 kg s{sup –1} and derive a CO{sub 2} gas production rate of (1.1 ± 0.1) × 10{sup 26} molecules s{sup –1}. Spitzer Infrared Spectrograph spectroscopic observations indicate the presence of fine-grained silicates, perhaps pyroxene rich, on the surface of Don Quixote. Our discovery suggests that CO{sub 2} can be present in near-Earth space over a long time. The presence of CO{sub 2} might also explain that Don Quixote's cometary nature remained hidden for nearly three decades.

79 ASTRONOMY AND ASTROPHYSICS↗

{sup 14}NH{sub 2}/{sup 15}NH{sub 2} RATIO IN COMET C/2012 S1 (ISON) OBSERVED DURING ITS OUTBURST IN 2013 NOVEMBER

We performed high-dispersion optical spectroscopic observations of comet C/2012 S1 (ISON) using the High Dispersion Spectrograph (R = 72,000) at the Subaru Telescope on UT 2013 November 15.6, during an outburst that started on UT 2013 November 14. Due to the high gas-production rate of NH{sub 2} during the outburst, we successfully detected weak emission lines of {sup 15}NH{sub 2} and many strong emission lines of {sup 14}NH{sub 2} in the optical wavelength region from 5500 to 8200 Å. The ratio of {sup 14}NH{sub 2}/{sup 15}NH{sub 2} is derived to be 139 ± 38 in comet C/2012 S1 (ISON). This ratio is close to that recently revealed based on the averaged spectrum of 12 comets, ∼130. This is also comparable to the typical cometary isotopic ratio of CN ({sup 12}C{sup 14}N/{sup 12}C{sup 15}N, observed in optical) and HCN (H{sup 12}C{sup 14}N/H{sup 12}C{sup 15}N, observed in radio), ∼150. However, these ratios are much smaller than the protosolar value, {sup 14}N/{sup 15}N = 441 ± 5. Because NH{sub 2} is considered to be a photodissociation product of NH{sub 3} in cometary coma, our result implies the occurrence of {sup 15}N fractionation of NH{sub 3} in the solar nebula or in the presolar molecular cloud.

79 ASTRONOMY AND ASTROPHYSICS↗

PRELIMINARY ANALYSIS OF SOHO/STEREO OBSERVATIONS OF SUNGRAZING COMET ISON (C/2012 S1) AROUND PERIHELION

We present photometric and morphological analysis of the behavior of sungrazing comet C/2012 S1 ISON in Solar and Heliospheric Observatory (SOHO) and Solar TErrestrial RElations Observatory (STEREO) images around its perihelion on 2013 November 28.779 UT. ISON brightened gradually November 20-26 with a superimposed outburst on November 21.3-23.5. The slope of brightening changed about November 26.7 and was significantly steeper in SOHO's orange and clear filter images until November 27.9 when it began to flatten out, reaching a peak about November 28.1 (r {sub H} ≈ 17 R {sub ☉}), then fading before brightening again from November 28.6 (r {sub H} ≈ 5 R {sub ☉}) until disappearing behind the occulting disk. ISON brightened continuously as it approached perihelion while visible in all other telescopes/filters. The central condensation disappeared about November 28.5 and the leading edge became progressively more elongated until perihelion. These photometric and morphological behaviors are reminiscent of the tens of meter-sized Kreutz comets regularly observed by SOHO and STEREO and strongly suggest that the nucleus of ISON was destroyed prior to perihelion. This is much too small to support published gas production rates and implies significant mass loss and/or disruption in the days and weeks leading up to perihelion. No central condensation was seen post-perihelion. The post-perihelion lightcurve was nearly identical in all telescopes/filters and fell slightly steeper than r{sub H}{sup −2}. This implies that the brightness was dominated by reflected solar continuum off of remnant dust in the coma/tail and that any remaining active nucleus was <10 m in radius.

79 ASTRONOMY AND ASTROPHYSICS↗

PREDICTION OF FORBIDDEN ULTRAVIOLET AND VISIBLE EMISSIONS IN COMET 67P/CHURYUMOV–GERASIMENKO

Remote observation of spectroscopic emissions is a potential tool for the identification and quantification of various species in comets. The CO Cameron band (to trace CO{sub 2}) and atomic oxygen emissions (to trace H{sub 2}O and/or CO{sub 2}, CO) have been used to probe neutral composition in the cometary coma. Using a coupled-chemistry-emission model, various excitation processes controlling the CO Cameron band and different atomic oxygen and atomic carbon emissions have been modeled in comet 67P/Churyumov–Gerasimenko at 1.29 AU (perihelion) and at 3 AU heliocentric distances, which is being explored by ESA's Rosetta mission. The intensities of the CO Cameron band, atomic oxygen, and atomic carbon emission lines as a function of projected distance are calculated for different CO and CO{sub 2} volume mixing ratios relative to water. Contributions of different excitation processes controlling these emissions are quantified. We assess how CO{sub 2} and/or CO volume mixing ratios with respect to H{sub 2}O can be derived based on the observed intensities of the CO Cameron band, atomic oxygen, and atomic carbon emission lines. The results presented in this work serve as baseline calculations to understand the behavior of low out-gassing cometary coma and compare them with the higher gas production rate cases (e.g., comet Halley). Quantitative analysis of different excitation processes governing the spectroscopic emissions is essential to study the chemistry of inner coma and to derive neutral gas composition.

79 ASTRONOMY AND ASTROPHYSICS↗

Thermomechanical simulation of the DIAMINO irradiation experiment using the LICOS fuel design code

Two separate-effect experiments in the HFR and OSIRIS Material Test Reactors (MTRs) are currently under Post- Irradiation Examinations (MARIOS) and under preparation (DIAMINO) respectively. The main goal of these experiments is to investigate gaseous release and swelling of Am-bearing UO2-x fuels as a function of temperature, fuel microstructure and gas production rate. First, a brief description of the MARIOS and DIAMINO irradiations is provided. Then, the innovative experimental in-pile device specifically developed for the DIAMINO experiment is described. Eventually, the thermo-mechanical computations performed using the LICOS code are presented. These simulations support the DIAMINO experimental design and highlight some of the capabilities of the code. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Gas retention and release from Hanford Site sludge waste tanks - 15491

Radioactive wastes from nuclear fuel processing are stored in large underground storage tanks at the Hanford Site. Solid wastes can be divided into salt-cake (mostly precipitated soluble sodium nitrate and nitrite salts with some interstitial liquid consisting of concentrated salt solutions) and sludge (mostly low solubility aluminum and iron compounds with relatively dilute interstitial liquid). Waste generates hydrogen through the radiolysis of water and organic compounds, radio-thermolytic decomposition of organic compounds, and corrosion of a tank's carbon steel walls. Nonflammable gases, such as nitrous oxide and nitrogen, are also produced. Additional flammable gases (e.g., ammonia and methane) are generated by chemical reactions between various degradation products of organic chemicals present in the tanks. Six double-shell tanks (DSTs) containing salt-cake wastes began showing signs of gas accumulation and buoyant instability in the form of periodic waste level drops in the 1980's. Studies in the 1990's indicated that gas would accumulate in the settled solids layer until its bulk density was lower than the supernatant liquid. The resultant gas release caused by this instability was termed a Buoyant Displacement Gas Release Event (BDGRE). Criteria were developed to prevent forming additional waste tanks that exhibited BDGREs. Significant gas accumulation and BDGREs were never observed in tanks containing predominantly sludge wastes. Literature reviews, data from Hanford Site waste tanks, and experiments with waste simulants have led to new conclusions on gas retention and release in sludge waste. The data show similar overall behavior where initially the settled solids volume increases as gas bubbles form. Gas fraction in the settled solids increases to a peak concentration after which additional generated gas escapes through connected cracks and there is a balance between gas generation and gas release with little change in gas fraction. Experiments showed that this behavior does not change as sludge waste depth increases. Sufficient data now exist to differentiate between gas retention and release behavior in Hanford Site sludge waste tanks and salt-cake waste tanks. The salt-cake criteria do not need to be applied to sludge waste tanks that exhibit certain gas retention and release behavior. Criteria for waste characteristics and process behavior have been defined that identify specific wastes and tanks that, based on previous operating experience, will have low gas retention and will not exhibit large, spontaneous releases. The first criterion defines what waste is considered sludge and what waste is considered salt-cake. If the mass ratio of soluble to insoluble constituents is below 2.5, then the waste is sludge. The second criterion is a density difference criterion that prevents tanks being operated in a region where sludge buoyancy might occur. For large gas releases to occur, the settled solids must accumulate sufficient gas to become less dense than the overlying supernatant (i.e., the settled solids would become buoyant). Based on previous operating experience, the ratio of liquid density to degassed settled solids bulk density (ρl/ρB) should be maintained at ≤ 0.84. This ensures that retained gas content in the sludge would need to exceed 16% by volume for the settled solids to become buoyant in the overlying supernatant. Tank waste that satisfies the mass ratio criterion, the liquid to bulk solids density criterion, and has process data supporting typical Hanford waste sludge behavior does not pose a significant risk for a large spontaneous gas release event. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Density-Functional Theory Study of the Effects of Atomic Impurity on the Band Edges of Monoclinic WO3

The effects of impurities in room-temperature monoclinic WO3 were studied by using the local density approximation to density-functional theory. Our main focus is on nitrogen impurity in WO{sub 3}, where both substitutional and interstitial cases were considered. We have also considered transition-metal atom impurities and some codoping approaches in WO{sub 3}. We find that, in general, band gap reduction was a common result due to the formation of impurity bands in the band gap. Also, the changes of band-edge positions, valence-band maxima and conduction-band minima, were found to depend on the electronic properties of the foreign atom and their concentration. Our results therefore provide guidance for making WO3 a suitable candidate for photoelectrodes for hydrogen generation by water splitting.

08 HYDROGEN↗

Economic Analysis of a Nuclear Reactor Powered High-Temperature Electrolysis Hydrogen Production Plant

A reference design for a commercial-scale high-temperature electrolysis (HTE) plant for hydrogen production was developed to provide a basis for comparing the HTE concept with other hydrogen production concepts. The reference plant design is driven by a high-temperature helium-cooled nuclear reactor coupled to a direct Brayton power cycle. The reference design reactor power is 600 MWt, with a primary system pressure of 7.0 MPa, and reactor inlet and outlet fluid temperatures of 540°C and 900°C, respectively. The electrolysis unit used to produce hydrogen includes 4,009,177 cells with a per-cell active area of 225 cm2. The optimized design for the reference hydrogen production plant operates at a system pressure of 5.0 MPa, and utilizes an air-sweep system to remove the excess oxygen that is evolved on the anode (oxygen) side of the electrolyzer. The inlet air for the air-sweep system is compressed to the system operating pressure of 5.0 MPa in a four-stage compressor with intercooling. The alternating-current, AC, to direct-current, DC, conversion efficiency is 96%. The overall system thermal-to-hydrogen production efficiency (based on the lower heating value of the produced hydrogen) is 47.12% at a hydrogen production rate of 2.356 kg/s. An economic analysis of this plant was performed using the standardized H2A Analysis Methodology developed by the Department of Energy (DOE) Hydrogen Program, and using realistic financial and cost estimating assumptions. The results of the economic analysis demonstrated that the HTE hydrogen production plant driven by a high-temperature helium-cooled nuclear power plant can deliver hydrogen at a competitive cost. A cost of $3.23/kg of hydrogen was calculated assuming an internal rate of return of 10%.

08 HYDROGEN↗

Fabrication and efficient photocatalytic activity of porous CdS-pillared tetratitanate nanohybrid

Highlights: • Heterostructured CdS–H{sub 2}Ti{sub 4}O{sub 9} nanohybrid exhibits a wide spectral response. • The nanohybrid gave a H{sub 2} evolution rate of 895 μmol h{sup –1} g{sup –1} in water splitting. • The electronic coupling was evidenced by XPS and photocurrent results. - Abstract: Heterostructured CdS-pillared tetratitanate nanohybrid was fabricated by electrostatically driven self-assembly of the exfoliated tetratitanate nanosheets and CdS nanosol particles. It was revealed that the present nanohybrid is porous with a specific surface area of 65 m{sup 2} g{sup −1} and that the tetratitanate nanosheets were restacked in a well-ordered arrangement with a gallery height of 2.3 nm. The formation of an electronic coupling between the titanate nanosheets and the encapsulated CdS pillars was supported by XPS and photocurrent measurements. The nanohybrid exhibits a highly photocatalytic activity of 895 μmol h{sup −1} g{sup −1} in H{sub 2} evolution from water splitting under 300 W Xe lamp irradiation, which is about 11 and 7 times higher than its parents H{sub 2}Ti{sub 4}O{sub 9}·H{sub 2}O and CdS, respectively. Loading 3 wt% Pt resulted in that its activity was further improved to 1897 μmol h{sup −1} g{sup −1}. It was showed that the as-prepared nanohybrid has an excellent stability and recurrence performance in hydrogen generation.

36 MATERIALS SCIENCE↗

Hydrogen Generation through Indirect Biophotolysis in Batch Cultures of the Non-Heterocystous Nitrogen-Fixing Cyanobacterium Plectonema boryanum

The nitrogen-fixing non-heterocystous cyanobacterium Plectonema boryanum was used as a model organism to study hydrogen generation by indirect biophotolysis in nitrogen-limited batch cultures that were continuously illuminated and sparged with argon/CO2 to maintain anaerobiosis. The highest hydrogen production rate (i.e., 0.18 mL/mg∙day or 7.3 μmol/mg∙day) ) was observed in cultures with an initial medium nitrate concentration of 1 mM at a light intensity of 100 μmol/m2∙sec. The addition of photosystem II inhibitor DCMU did not reduce hydrogen production rates relative to unchallenged controls for 50 to 150 hours, and intracellular glycogen concentrations decreased significantly during the hydrogen generation period. The insensitivity of the hydrogen production process to DCMU is indicative of the fact that hydrogen was not derived from water splitting at photosystem II (i.e., direct biophotolysis) but rather from electrons provided by intracellular glycogen reserves (i.e., indirect biophotolysis). It was shown that hydrogen generation could be sustained for long time periods by subjecting the cultures to alternating cycles of aerobic, nitrogen-limited growth and anaerobic hydrogen production.

08 HYDROGEN↗

First-principles study of water on copper and noble metal (110) surfaces

Water structure and dissociation kinetics on a model open metal surface: Cu(110), has been investigated in detail based on first-principles electronic structure calculations. We revealed that in both monomer and overlayer forms, water adsorbs molecularly, with a high tendency for diffusion and/or desorption rather than dissociation on clean surfaces at low temperature. Studying water on other noble metal (110) surfaces confirms that Cu(110) is the borderline between intact and dissociative water adsorption, differing in energy by only 0.08 eV. This may lead to promising applications in hydrogen generation and fuel cells.

36 MATERIALS SCIENCE↗

Atomic layer deposited cobalt oxide: An efficient catalyst for NaBH{sub 4} hydrolysis

Thin films of cobalt oxide are deposited by atomic layer deposition using dicobalt octacarbonyl [Co{sub 2}(CO){sub 8}] and ozone (O{sub 3}) at 50 °C on microscope glass substrates and polished Si(111) wafers. Self-saturated growth mechanism is verified by x-ray reflectivity measurements. As-deposited films consist of both the crystalline phases; CoO and Co{sub 3}O{sub 4} that gets converted to pure cubic-Co{sub 3}O{sub 4} phase upon annealing at 500 °C under ambient condition. Elemental composition and uniformity of the films is examined by x-ray photoelectron spectroscopy and secondary ion-mass spectroscopy. Both as-deposited and the annealed films have been successfully tested as a catalyst for hydrogen evolution from sodium borohydride hydrolysis. The activation energy of the hydrolysis reaction in the presence of the as-grown catalyst is found to be ca. 38 kJ mol{sup −1}. Further implementation of multiwalled carbon nanotube, as a scaffold layer, improves the hydrogen generation rate by providing higher surface area of the deposited catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effective hydrogen generation and resource circulation based on sulfur cycle system

For the effective hydrogen generation from H{sub 2}S, it should be compatible that the increscent of the photocatalytic (or electrochemical) activities and the development of effective utilization method of by-products (poly sulfide ion). In this study, “system integration” to construct the sulfur cycle system, which is compatible with the increscent of the hydrogen and or electron energy generation ratio and resource circulation, is investigated. Photocatalytic hydrogen generation rate can be enhanced by using stratified photocatalysts. Photo excited electron can be transpired to electrode to convert the electron energy to hydrogen energy. Poly sulfide ion as the by-products can be transferred into elemental sulfur and/or industrial materials such as rubber. Moreover, elemental sulfur can be transferred into H{sub 2}S which is the original materials for hydrogen generation. By using this “system integration”, the sulfur cycle system for the new energy generation can be constructed.

36 MATERIALS SCIENCE↗

Impact of Salt Waste Processing Facility Streams on the Nitric-Glycolic Flowsheet in the Chemical Processing Cell

An evaluation of the previous Chemical Processing Cell (CPC) testing was performed to determine whether the planned concurrent operation, or “coupled” operations, of the Defense Waste Processing Facility (DWPF) with the Salt Waste Processing Facility (SWPF) has been adequately covered. Tests with the nitricglycolic acid flowsheet, which were both coupled and uncoupled with salt waste streams, included several tests that required extended boiling times. This report provides the evaluation of previous testing and the testing recommendation requested by Savannah River Remediation. The focus of the evaluation was impact on flammability in CPC vessels (i.e., hydrogen generation rate, SWPF solvent components, antifoam degradation products) and processing impacts (i.e., acid window, melter feed target, rheological properties, antifoam requirements, and chemical composition).

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Dye-sensitized MIL-101 metal organic frameworks loaded with Ni/NiO{sub x} nanoparticles for efficient visible-light-driven hydrogen generation

The Ni/NiO{sub x} particles were in situ photodeposited on MIL-101 metal organic frameworks as catalysts for boosting H{sub 2} generation from Erythrosin B dye sensitization under visible-light irradiation. The highest H{sub 2} production rate of 125 μmol h{sup −1} was achieved from the system containing 5 wt. % Ni-loaded MIL-101 (20 mg) and 30 mg Erythrosin B dye. Moreover, the Ni/NiO{sub x} catalysts show excellent stability for long-term photocatalytic reaction. The enhancement on H{sub 2} generation is attributed to the efficient charge transfer from photoexcited dye to the Ni catalyst via MIL-101. Our results demonstrate that the economical Ni/NiO{sub x} particles are durable and active catalysts for photocatalytic H{sub 2} generation.

36 MATERIALS SCIENCE↗

Composition-optimized TiO{sub 2}/CdS{sub x}Se{sub 1-x} core/shell nanowire arrays for photoelectrochemical hydrogen generation

Core/shell heterostructured TiO{sub 2}/CdS{sub x}Se{sub 1-x} nanowire arrays (NWAs) were prepared via physical vapor deposition of CdS{sub x}Se{sub 1-x} layer onto the hydrothermal pre-grown TiO{sub 2} NWAs with FTO as conductive substrate. By change the sulfur content (x) in the TiO{sub 2}/CdS{sub x}Se{sub 1-x} nano-composites, it was observed that the light absorption edge can be gradually tuned within a broad wavelength from 540 to 710 nm. When used as photoanodes for hydrogen generation, the as-prepared TiO{sub 2}/CdS{sub x}Se{sub 1-x} NWAs show much higher photoelectroncatalytic activity than the pristine TiO{sub 2} NWAs. Moreover, the TiO{sub 2}/CdS{sub x}Se{sub 1-x} photoelectrode with x = 0.52 exhibited the highest photocurrent level and outstanding stability, which is more suitable for long-time hydrogen generation. This study may be useful in the design of alloy hetrostructure photoelectrodes with optimal chemical composition toward the more efficient solar conversion devices.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Progress on ATF development of SiC for LWR

Since 2011, Toshiba has been participating in a study whose objective is the commercial utilization of SiC instead of Zircaloy as LWR fuel material. During the period (Phase-1) from 2012 to 2015, feasibility studies on material design and fabrication were performed. This paper reports the principal results of a comprehensive feasibility study on SiC involving experiments and trial fabrication in terms of material properties, core and fuel design, and analytical simulation for safety analysis. The principal results are summarized as follows. First, the fabrication trials for the reduced scales of channel box and cladding have been successfully performed. Secondly, with regard to fuel rod performance analysis, hoop stress during normal operation may be a potential issue in fuel mechanical design as it is relatively high. Thirdly, with regard to safety analysis, the hydrogen generation of SiC fuel tends to decrease significantly compared with that of Zircaloy fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Radiological Consequences of Hydrogen Explosions in Vessels and Piping at the WTP

Hydrogen (along with other gases) is generated in process vessels and other components at the Hanford Waste Treatment and Immobilization Plant (WTP) due to the radiolysis of water and to the radiolysis and thermolysis of organics in WTP radioactive process wastes. In the absence of controls, the hydrogen may accumulate until a flammable or explosive concentration is reached. Once a buildup has occurred, ignition of the hydrogen causes an explosion that creates radioactive aerosols that could escape the confinement boundary and be released to the environment. Such a release could cause significant radiological exposures to a public receptor at the site boundary and to a co-located worker (CLW/) in the yard areas outside the physical facilities. Hydrogen explosion events therefore require evaluation as to the potential magnitude of their consequences. The WTP methodology for the evaluation of the potential radiological consequences due to hydrogen explosions in vessels and piping is a conservative approach that is defensible from a regulatory standpoint yet only results in the need for Safety controls for the most highly radioactive process vessels (generally those containing waste with significant quantities of solids). For WTP vessels with waste not containing significant quantities of solids, radiological dose consequences are sufficiently low such that neither Safety Class controls for the public receptor nor Safety Significant controls for the CLW are required. Similarly, the dose consequences for hydrogen explosions in piping and ancillary vessels are all very low to both receptors, again indicating that no Safety Class or Safety Significant controls are required. The WTP vessel and piping hydrogen explosion calculations are dependent on vessel and pipe sizes, hydrogen generation rates, operational requirements, and waste stream properties such as solids content, radioisotope concentration, and slurry density. Consequently, the WTP-specific results discussed above cannot be extrapolated directly to other facilities. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗