Search NASA⌕ Search

SEARCH · Search NASA

Results for “IODINE 136”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Nuclear Data Sheets for A=136☆

Spectroscopic data for all nuclei with mass number A=136 have been evaluated and the corresponding level schemes from radioactive decay and reaction studies are presented. No excited states are known in {sup 136}In, {sup 136}Eu, or {sup 136}Gd and {sup 136}Tb remains unidentified. Discrepancies between experiments on isomeric decays in {sup 136}Sb and {sup 136}La suggest the need for futher experimental investigation. The decay of {sup 136}Eu has only been observed in a mixed source. The energy of the 17.5 s isomer in {sup 136}Cs was determined since the last evaluation, however, the branching ratio remains unknown. This work supersedes the earlier full evaluation of A=136 by A.A. Sonzogni (2002So05), and benefited tremendously from all previous evaluations of A=136.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

g-factor and spin-parity assignments of excited states in the N=83 isotones {sup 135}Te, {sup 136}I, {sup 137}Xe, and {sup 138}Cs

The g factor of the 15/2{sup -} state in {sup 137}Xe was measured for the first time by using a newly developed technique for measuring angular correlations with Gammasphere. Spins and parities were assigned to several levels in the N=83 isotones {sup 135}Te, {sup 136}I, {sup 137}Xe, and {sup 138}Cs. The calculated g factor in the shell-model frame is in good agreement with the measured one in the present work. Shell-model calculations also support our spin-parity assignments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Similarity of nuclear structure in the {sup 132}Sn and {sup 208}Pb regions: Proton-neutron multiplets

Starting from the striking similarity of proton-neutron multiplets in {sup 134}Sb and {sup 210}Bi, we perform a shell-model study of nuclei with two additional protons or neutrons to find out to what extent this analogy persists. We employ effective interactions derived from the CD-Bonn nucleon-nucleon potential renormalized by use of the V{sub low-k} approach. The calculated results for {sup 136}Sb, {sup 212}Bi, {sup 136}I, and {sup 212}At are in very good agreement with the available experimental data. The similarity between {sup 132}Sn and {sup 208}Pb regions is discussed in connection with the effective interaction, emphasizing the role of core polarization effects.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Identification of high spin states in {sup 134}I from {sup 252}Cf fission

High spin states in {sup 134}I were identified for the first time based on measurements of prompt {gamma} rays from the spontaneous fission of {sup 252}Cf at Gammasphere. Five excited levels with five deexciting transitions were observed. The mass number was assigned based on the intensity of transitions in the complementary Rh fragments. Angular correlations for the first two transitions in {sup 134}I and for high spin states in {sup 133,135,136}I were performed, but were not sufficient to firmly assign the spins and parities in {sup 134}I.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Multi-quasiparticle isomers in the vicinity of {sup 132}Sn

Nuclear isomers with multi-quasiparticle configurations near closed shells serve as valuable experimental probes which reveal the nature of residual nucleon-nucleon interactions. We have populated stable and neutron-rich odd-A antimony (Z = 51) and iodine (Z = 53) isotopes using multi-nucleon transfer and fusion-fission reactions with {sup 136}Xe beams and also using incomplete-fusion reactions with {sup 7}Li beams. The decay properties of high-spin isomers have been investigated by means of time-correlated gamma-ray and electron spectroscopy and the measurement of gamma-ray angular correlations.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measuring Radioactivity from Fukushima Daiichi in New Mexico

On March 11, 2011, the Fukushima Daiichi nuclear power plant was damaged by the tsunami that followed the 'Great East Japan Earthquake,' and the reactor subsequently leaked radioactive material. In response, LANL augmented the routine ambient (AIRNET) and stack (Rad-NESHAP) measurements with three high-volume samplers: No.167 at the Old White Rock Fire Station; No.173 at the TA-49 gate, and No.211 at the Los Alamos Medical Center. Previous accidents, such as the Three-Mile-Island accident in 1979 and the Chernobyl accident in 1986, indicated that the most likely releases were (a) the noble gases: krypton and xenon; and (b) the volatile elements: cesium, tellurium, and iodine. At the latitude of Fukushima, the predominant winds across the Pacific Ocean are from west to east, and models predicted that the plume would arrive in the western US on about March 18. By this time the shorter-lived isotopes would have decayed. Therefore, the expected radionuclides were xenon-133, cesium-134, cesium-136, cesium-137, tellurium-132, iodine-131, and iodine-132. As expected, cesium-134, cesium-136, cesium-137, tellurium-132, iodine-131, and iodine-132 were all detected by all three high-volume samplers during March 17-21. The concentrations peaked during the March 24-28 period. After this, concentrations of all nuclides declined. In general, the concentrations were consistent with those measured by the EPA RadNet system and many other monitoring systems throughout the world. At the time of writing, preliminary results from the AIRNET and Rad-NESHAP systems are being reported. More detailed results are described in LA-UR-11-10304 and will be reported in full in the annual environmental report for 2011. All previous releases from nuclear reactors have been dominated by noble gases, primarily krypton and xenon, which are not measured by the high-volume samplers or the AIRNET system. However, in sufficient concentrations these and other fission products would be detected by NEWNET. Consistent with this possibility, all NEWNET detectors recorded an increase of 0.2 {micro}R/h from March 19-1, followed by an additional increase of 0.1 {micro}R/h on March 24 (Figure 1). The consistency of the NEWNET stations is indicated by the error bars, which represent the standard error of the mean of the individual stations. Over the next 10 days, the NEWNET readings declined with approximately the 5-day half life of xenon-133, returning to near normal levels on April 2. After this, any further decrease was masked by high radon concentrations on April 3, by a weather system that moved into New Mexico on April 4, and by rainfall on April 6-9. Furthermore, it is likely that all NEWNET detectors responded to a gradually increasing trend in terrestrial radiation during the month of March as the ground dried out. It is difficult to distinguish the hypothetical effects of xenon-133 from the fluctuations of radon decay products. However, at present we do not have an alternative hypothesis for the sharp increase that was observed in all NEWNET stations from March 19-21. Perhaps some of the increase was caused by radon or terrestrial radiation, in which case the observed increase is an upper limit to that caused by releases from Fukushima. LANL data are consistent with those of the EPA RadNet monitoring system. The EPA has repeatedly stated that 'The levels detected are far below levels of concern.'

CESIUM 134↗

Multi-quasiparticle isomers involving proton-particle and neutron-hole configurations in {sup 131}I and {sup 133}I

The nuclei {sup 131}I and {sup 133}I have been populated in multinucleon transfer reactions between {sup 136}Xe ions and various targets, and their structure has been investigated by time-correlated {gamma}-ray coincidence spectroscopy and the measurement of {gamma}-ray angular correlations. A 19/2{sup -} isomer at 1918 keV, with a half-life of 24(1) {mu}s, has been identified in {sup 131}I, as well as nanosecond isomers with J{sup {pi}}=23/2{sup +} in both isotopes. A T{sub 1/2}=25(3) ns isomer at 4308 keV in {sup 131}I is suggested to have J{sup {pi}}=(31/2{sup -},33/2{sup -}) and is primarily attributed to the coupling of an odd proton in the d{sub 5/2} or g{sub 7/2} orbit with the ({pi}{sup 2}){sub 0{sup +}}({nu}h{sub 11/2}{sup -3}d{sub 3/2}{sup -1}){sub 15{sup -}} configuration in {sup 130}Te responsible for the 15{sup -} isomer in that nucleus. The observed level properties are compared with predictions of a shell-model calculation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Adsorption and Transport Properties of Zeolite SAPO-34 for Krypton/Xenon Separations

Nuclear power is an economical means of providing carbon-free energy, but requires effective ways to deal with the radioactive waste products. As part of the overall process for recycling used nuclear fuel (UNF), it is necessary to develop technologies to separate the off-gases formed during the fission of uranium and plutonium in nuclear power reactors. The off-gas contains {sup 129}I (radioisotope), NO, NO{sub 2}, CO{sub 2} containing {sup 14}C (radioisotope), {sup 3}H{sub 2}O (radioactive tritium oxide), {sup 85}Kr (radioisotope), and {sup 136}Xe. Separating and capturing each gas is essential to reduce the volume of radioactive waste for storage. Currently there exist economical technologies to separate {sup 129}I and {sup 14}CO{sub 2}. However, Kr and Xe separation is challenging because they are chemically inert and physically very similar. The Kr/Xe mixture is approximately 10/90 by volume and hence the separation of Kr would reduce the volume of radioactive {sup 85}Kr waste by a factor of 10. One way of separating them is by cryogenic distillation wherein they are condensed out as pure streams at very low temperature (Kr boiling point: -153 deg. C, Xe: -108 deg. C). Cryogenic distillation has intensive power requirements and a large system volume, resulting in high capital, operating, and disposal costs. Membrane-based separation using radiation-stable materials such as nanoporous zeolites is an attractive alternative, if membranes with sufficient Kr flux and selectivity can be fabricated. An ideal membrane process would permeate a stream of pure Kr for storage and also produce a retentate of pure Xe which has commercial value (> $8/g at 99+% purity from Airgas{sup R}). Zeolites are nanoporous crystalline aluminosilicate materials with pores that are capable of separating molecules by shape and size. SAPO-34 is a silicoaluminophosphate zeolite with pore size of 0.38 nm. The SAPO-34 is a molecular sieve composed of 3D networks with CHA frame structure containing uniform micropores. Since this pore size is intermediate between the kinetic diameters of krypton (0.36 nm) and xenon (0.396 nm), it was hypothesized that SAPO-34 membranes can separate krypton and xenon by diffusivity differences. Previously we fabricated SAPO-34 membranes and showed that they are capable of separating Kr from Xe. Here we describe a more detailed study of the fundamental adsorption and transport properties of SAPO34. In particular, the permeabilities of Kr and Xe in SAPO-34 are dependent on both their adsorption and diffusion characteristics in the nanoporous zeolite. Typically, nanoporous materials show stronger adsorption of Xe than Kr (due to stronger van der Waals forces) but faster diffusion of Kr (due to smaller kinetic diameter). Therefore the overall membrane selectivity towards Kr will be determined by competition between these two effects. A main objective of this study is to quantify and understand adsorption, diffusion, and permeation in detail and thereby obtain: (1) fundamental parameters useful for design calculations of a Kr/Xe separation membrane process, and (2) an experimental and modeling framework that can provide guidance on the expected limits of performance of SAPO-34 and other zeolite materials. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Mechanism of Hydrocarbon Functionalization by an Iodate/Chloride System: The Role of Ester Protection

Mixtures of chloride and iodate salts for light alkane oxidation achieve > 20% yield of methyl trifluoroacetate (TFA) from methane with > 85% selectivity (J. Am. Chem. Soc. 2014, 136, 8393-8401). The mechanism of this C–H oxygenation has been probed by examining adamantane as a model substrate. These recent results lend support to the involvement of free radicals. Comparative studies between radical chlorination and iodate/chloride functionalization of adamantane afford statistically identical 3°:2° selectivities (~5.2:1) and kinetic isotope effects for C–H/C–D functionalization {kH/kD = 1.52(3) and 1.6(3)}. Alkane functionalization by iodate/chloride in HTFA is proposed to occur through H-atom abstraction by free radical species including Cl· to give alkyl radicals. Iodine, which forms by in situ reduction of iodate, traps the alkyl radicals as alkyl radicals that are subsequently converted to alkyl esters in HTFA solvent. Importantly, the alkyl ester products (RTFA) are quite stable to further oxidation under the oxidizing conditions due to the protecting nature of the ester moiety.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Exploring {sup 57}Co as a new isotope for brachytherapy applications

Purpose: The characteristics of the radionuclide {sup 57}Co make it interesting for use as a brachytherapy source. {sup 57}Co combines a possible high specific activity with the emission of relatively low-energy photons and a half-life (272 days) suitable for regular source exchanges in an afterloader. {sup 57}Co decays by electron capture to the stable {sup 57}Fe with emission of 136 and 122 keV photons. Methods: A hypothetical {sup 57}Co source based on the Flexisource brachytherapy encapsulation with the active core set as a pure cobalt cylinder (length 3.5 mm and diameter 0.6 mm) covered with a cylindrical stainless-steel capsule (length 5 mm and thickness 0.125 mm) was simulated using Geant4 Monte Carlo (MC) code version 9.4. The radial dose function, g(r), and anisotropy function F(r,{theta}), for the line source approximation were calculated following the TG-43U1 formalism. The results were compared to well-known {sup 192}Ir and {sup 125}I radionuclides, representing the higher and the lower energy end of brachytherapy, respectively. Results: The mean energy of photons in water, after passing through the core and the encapsulation material was 123 keV. This hypothetical {sup 57}Co source has an increasing g(r) due to multiple scatter of low-energy photons, which results in a more uniform dose distribution than {sup 192}Ir. Conclusions: {sup 57}Co has many advantages compared to {sup 192}Ir due to its low-energy gamma emissions without any electron contamination. {sup 57}Co has an increasing g(r) that results in a more uniform dose distribution than {sup 192}Ir due to its multiple scattered photons. The anisotropy of the {sup 57}Co source is comparable to that of {sup 192}Ir. Furthermore, {sup 57}Co has lower shielding requirements than {sup 192}Ir.

07 ISOTOPE AND RADIATION SOURCES↗