SEARCH · Search NASA
Results for “ION EMISSION”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Evidence of high-n hollow-ion emission from Si ions pumped by ultraintense x-rays from relativistic laser plasma
We report on the first observation of high- n hollow ions (ions having no electrons in the K or L shells) produced in Si targets via pumping by ultra-intense x-ray radiation produced in intense laser-plasma interactions reaching the radiation dominant kinetics regime (RDKR). The existence of these new types of hollow ions in high-energy density plasma has been found via observation of highly resolved x-ray emission spectra of silicon plasma. This has been confirmed by plasma kinetics calculations, underscoring the ability of powerful radiation sources to fully strip electrons from the innermost shells of light atoms. Hollow-ions spectral diagnostics provide a unique opportunity to characterize powerful x-ray radiation of laboratory and astrophysical plasmas. With the use of this technique we provide evidence for the existence of the RDKR via observation of asymmetry in the observed radiation of hollow ions from the front and rear sides of the target.
Investigation of intermittent enhancement of ion emission from a tungsten surface using the field-ion microscope.
The blinking effect, or the intermittent enhancement of ion emission, which is observed when a few parts per million neon are added to the imaging gas in a helium-tungsten field-ion microscope, has been investigated. Measurements of the characteristic quantities involved - i.e., blinking rate, voltage limits, etc. - and their variation with temperature, field, and gas pressure, are described.
EXPERIMENTS ON ATOM AND ION EMISSION FROM POROUS TUNGSTEN
Cesium atom and ion emission from porous tungsten
Electron and ion emission from polycrystalline surfaces of Nb, Mo, Ta, W, Re, Os, and Ir in cesium vapor.
Full temperature range electron and ion emission from polycrystalline surfaces of Nb, Mo, Ta, W, Re, Os and Ir in cesium vapor
Future beam experiments in the magnetosphere with plasma contactors: The electron collection and ion emission routes
Experiments where a high-voltage electron beam emitted by a spacecraft in the low-density magnetosphere is used to probe the magnetospheric configuration could greatly enhance our understanding of the near-Earth environment. Their challenge, however, resides in the fact that the background magnetospheric plasma cannot provide a return current that balances the electron beam current without charging the spacecraft to such high potential that in practice prevents beam emission. In order to overcome this problem, a possible solution is based on the emission of a high-density contactor plasma by the spacecraft prior to and after the beam. In this paper, we perform particle-in-cell simulations to investigate the conditions under which a high-voltage electron beam can be emitted from a magnetospheric spacecraft, comparing two possible routes that rely on the high-density contactor plasma. The first is an “electron collection” route, where the contactor has lower current than the electron beam and is used with the goal of connecting to the background plasma and collecting magnetospheric electrons over a much larger area than that allowed by the spacecraft alone. The second is an “ion emission” route, where the contactor has higher current than the electron beam. Ion emission is then enabled over the large quasi-spherical area of the contactor cloud, thus overcoming the space charge limits typical of ion beam emission. Finally, our results indicate that the ion emission route offers a pathway for performing beam experiments in the low-density magnetosphere, while the electron collection route is not viable because the contactor fails to draw a large neutralizing current from the background.
Evolution of ion emission yield of alloys with the nature of the solute. 2: Interpretation
Solid solutions of transition elements in copper, nickel, cobalt, iron, and aluminum matrices were analyzed by observing secondary ion emissions under bombardment with 6.2-keV argon ions. Enchancement of the production of solute-element ions was observed. An ion emission model is proposed according to which the ion yield is governed by the probability of an atom leaving the metal in a preionized state. The energy distribution of the valence electrons of the solute atoms is the bases of the probability calculation.
Cesium vapor thermionic converter anomalies arising from negative ion emission
Compelling experimental evidence is given that a longstanding limit encountered on cesium vapor thermionic energy converter performance improvement and other anomalies arise from thermionic emission of cesium negative ions. It is shown that the energy that characterizes thermionic emission of cesium negative ions is 1.38 eV and, understandably, is not the electron affinity 0.47 eV determined for the photodetachment threshold of the cesium negative ion. The experimental evidence includes measurements of collector work functions and volt-ampere characteristics in quasi-vacuum cesium vapor thermionic diodes, along with reinterpretation of the classic Taylor-Langmuir S-curve data on electron emission in cesium vapor. The quantitative effects of negative ion emission on performance in the ignited, unignited, and quasi-vacuum modes of cesium vapor thermionic converter operation are estimated.
FEASIBILITY OF APPLYING FIELD-ION EMISSION TO ELECTROSTATIC ROCKET ENGINES
Application of field-ion emission to electrostatic rocket engines - ionization lifetimes of hydrogen, lithium, sodium, rubidium, cesium, and xenon
Electron and ion emission from polycrystalline surfaces of Be, Ti, Cr, Ni, Cu, Pt, and type-304 stainless steel in cesium vapor.
Electron and ion emission from polycrystalline surface of Be, Ti, Cr, Ni, Cu, Pt and type-304 stainless steel in cesium vapor
Influence of laser pulse duration on extreme ultraviolet and ion emission features from tin plasmas
We investigated the role of laser pulse duration and intensity on extreme ultraviolet (EUV) generation and ion emission from a laser produced Sn plasma. For producing plasmas, planar slabs of pure Sn were irradiated with 1064 nm Nd:YAG laser pulses with varying pulse duration (5–20 ns) and intensity. Experimental results performed at CMUXE indicate that the conversion efficiency (CE) of the EUV radiation strongly depend on laser pulse width and intensity, with a maximum CE of ∼2.0% measured for the shortest laser pulse width used (5 ns). Faraday Cup ion analysis of Sn plasma showed that the ion flux kinetic profiles are shifted to higher energy side with the reduction in laser pulse duration and narrower ion kinetic profiles are obtained for the longest pulse width used. However, our initial results showed that at a constant laser energy, the ion flux is more or less constant regardless of the excitation laser pulse width. The enhanced EUV emission obtained at shortest laser pulse duration studied is related to efficient laser-plasma reheating supported by presence of higher energy ions at these pulse durations.
Investigation of intermittent enhancement of ion emission from a tungsten surface using the field ion microscope
Measuring intermittent enhancement of blinking effect upon addition of neon to imaging gas in helium-tungsten field-ion microscope
Cesium neutral and ion emission from carburized and oxygenated porous tungsten.
Performance of porous tungsten cesium ion emitters compared for clean oxygenated and carburized surfaces
Quantifying Fusion Born Ion Populations in Magnetically Confined Plasmas using Ion Cyclotron Emission
Ion cyclotron emission (ICE) offers unique promise as a diagnostic of the fusion born alpha-particle population in magnetically confined plasmas. Pioneering observations from JET and TFTR found that ICE intensity P ICE scales approximately linearly with the measured neutron flux from fusion reactions, and with the inferred concentration, n /n i , of fusion-born alpha-particles confined within the plasma. We present fully nonlinear self-consistent kinetic simulations that reproduce this scaling for the first time. This resolves a longstanding question in the physics of fusion alpha particle confinement and stability in MCF plasmas. It confirms the MCI as the likely emission mechanism and greatly strengthens the basis for diagnostic exploitation of ICE in future burning plasmas.
Reaction nanoscopy of ion emission from sub-wavelength propanediol droplets
Abstract Droplets provide unique opportunities for the investigation of laser-induced surface chemistry. Chemical reactions on the surface of charged droplets are ubiquitous in nature and can provide critical insight into more efficient processes for industrial chemical production. Here, we demonstrate the application of the reaction nanoscopy technique to strong-field ionized nanodroplets of propanediol (PDO). The technique’s sensitivity to the near-field around the droplet allows for the in-situ characterization of the average droplet size and charge. The use of ultrashort laser pulses enables control of the amount of surface charge by the laser intensity. Moreover, we demonstrate the surface chemical sensitivity of reaction nanoscopy by comparing droplets of the isomers 1,2-PDO and 1,3-PDO in their ion emission and fragmentation channels. Referencing the ion yields to gas-phase data, we find an enhanced production of methyl cations from droplets of the 1,2-PDO isomer. Density functional theory simulations support that this enhancement is due to the alignment of 1,2-PDO molecules on the surface. The results pave the way towards spatio-temporal observations of charge dynamics and surface reactions on droplets.
Electron and ion emission from surfaces originally of TaB sub 2, ZrC, Mo sub 2 C, MoSi sub 2, TaSi sub 2, and WSi sub 2 in cesium vapor.
Surface electron and ion emission from refractory metal compounds in cesium vapor, showing electron emission S curves and surface ionization critical temperature envelopes
Controlling single rare earth ion emission in an electro-optical nanocavity
Abstract Rare earth emitters enable critical quantum resources including spin qubits, single photon sources, and quantum memories. Yet, probing of single ions remains challenging due to low emission rate of their intra-4 f optical transitions. One feasible approach is through Purcell-enhanced emission in optical cavities. The ability to modulate cavity-ion coupling in real-time will further elevate the capacity of such systems. Here, we demonstrate direct control of single ion emission by embedding erbium dopants in an electro-optically active photonic crystal cavity patterned from thin-film lithium niobate. Purcell factor over 170 enables single ion detection, which is verified by second-order autocorrelation measurement. Dynamic control of emission rate is realized by leveraging electro-optic tuning of resonance frequency. Using this feature, storage, and retrieval of single ion excitation is further demonstrated, without perturbing the emission characteristics. These results promise new opportunities for controllable single-photon sources and efficient spin-photon interfaces.
Electron and ion emission from a copper surface in the presence of oxygen, cesium, and oxygen plus cesium.
Thermionic work functions and electron emission S curves for contaminated copper surface in oxygen and cesium vapors, separate and mixed