SEARCH · Search NASA
Results for “ION INJECTION”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Two Azimuthally Separated Regions of Cusp Ion Injection Observed via Energetic Neutral Atoms
The low-energy neutral atom (LENA) imager on the IMAGE spacecraft can detect energetic neutral atoms produced by ion injection into the cusp through a charge exchange with the Earth's hydrogen exosphere. We examined the occurrence of the LENA cusp signal during positive IMF B(sub z) in terms of the arrival direction and the IMF clock angle theta(sub CA). Results of statistical analyses show that the occurrence frequency is high on the postnoon side when theta(sub CA) is between approximately 20 degrees and approximately 50 degrees. This is ascribed to ion injection caused by cusp reconnection typical of positive IMF B(sub z). Our results also show that there is another situation of high occurrence frequency, which can be identified with theta(sub CA) of approximately 30 degrees to approximately 80 degrees. When theta(sub CA) is relatively large (60 degrees - 80 degrees), occurrence frequencies are high at relatively low latitudes over a wide extent spanning both prenoon and postnoon sectors. This feature suggests that the ion injection is caused by reconnection at the dayside magnetopause. Its postnoon side boundary shifts toward the prenoon as theta(sub CA) decreases. When theta(sub CA) is less than approximately 50 degrees, the high occurrence frequency exists well inside the prenoon sector, which is azimuthally separated from the postnoon region ascribed to cusp reconnection. The prenoon region, which is thought due to ion injection caused by dayside reconnection, may explain the recent report that proton aurora brightening occurs in the unanticipated prenoon sector of the northern high-latitude ionosphere for IMF B(sub y) greater than 0 and B(sub z) greater than 0.
Retention coefficients and thermal release profiles of ion-injected argon from silicates and iron
Thermal release profiles and retention coefficients of injected argon ions for silicates and iron simulating meteoritic materials
Ion Injection Triggered EMIC Waves in the Earth's Magnetosphere
We present Van Allen Probe observations of electromagnetic ion cyclotron (EMIC) waves triggered solely due to individual substorm-injected ions in the absence of storms or compressions of the magnetosphere during 9 August 2015. The time at which the injected ions are observed directly corresponds to the onset of EMIC waves at the location of Van Allen Probe A (L = 5.5 and 18:06 magnetic local time). The injection was also seen at geosynchronous orbit by the Geostationary Operational Environmental Satellite and Los Alamos National Laboratory spacecraft, and the westward(eastward) drift of ions(electrons) was monitored by Los Alamos National Laboratory spacecraft at different local times. The azimuthal location of the injection was determined by tracing the injection signatures backward intime to their origin assuming a dipolar magnetic field of Earth. The center of this injection location wasdetermined to be close to 20:00 magnetic local time. Geostationary Operational Environmental Satelliteand ground magnetometer responses confirm substorm onset at approximately the same local time.The observed EMIC wave onsets at Van Allen Probe were also associated with a magnetic field decrease.The arrival of anisotropic ions along with the decrease in the magnetic field favors the growth of the EMICwave instability based on linear theory analysis.
The Role of Three-dimensional Effects on Ion Injection and Acceleration in Perpendicular Shocks
Understanding the conditions that enable particle acceleration at nonrelativistic collisionless shocks is essential to unveil the origin of cosmic rays. We employ 2D and 3D hybrid simulations (with kinetic ions and fluid electrons) to explore particle acceleration and magnetic field amplification in nonrelativistic perpendicular shocks, focusing on the role of shock drift acceleration and its dependence on the shock Mach number. We perform an analysis of the ion injection process and demonstrate why efficient acceleration is only observed in 3D. In particular, we show that ion injection critically depends on the “porosity” of the magnetic turbulence in the downstream region near the shock, a property describing how easily the postshock region allows particles to traverse it and return upstream without being trapped. This effect can only be properly captured in 3D. Additionally, we explore the impact of numerical resolution on ion energization, highlighting how resolving small-scale turbulence—on scales below the thermal ion gyroradius—is essential for accurately modeling particle injection. Overall, our results emphasize the necessity of high-resolution 3D simulations to capture the fundamental microphysics driving particle acceleration at perpendicular shocks.
Ion injection and acceleration at quasi-perpendicular shocks
We present and discuss results of a new model for ion injections and acceleration at quasi-perpendicular collisionless shocks. We use the one-dimensional hybrid simulation (kinetic ions/fluid electrons) and impose an assumption on the ion motion so that diffusion across the magnetic field (normal to the shock front) is possible. These motions are otherwise suppressed by both one- and two-dimensional simulations. We find that, even in strictly perpendicular shocks, when scattering normal to the field is included, a fraction of the incident ions are accelerated to suprathermal energies. When reasonable scattering times are considered, only pickup ions are injected, whereas thermal solar wind ions are not. The acceleration of these ions is very rapid. We have found that a few of the initially low-energy pickup ions can reach many tens to a few hundred times the plasma ramming energy in less than 100 gyroperiods. Furthermore, highly field aligned energetic ions are found to exist upstream of the slightly oblique shock. The most direct applications of this study is toward the interpretation of observations of both solar wind and interstellar pickup ion distributions in the vicinity of interplanetary shocks which are most often quasi-perpendicular. This work also directly addresses a fundamental issue with regard to our current understanding of the anomalous component of cosmic rays.
A Reversible Structural Phase Transition by Electrochemically-Driven Ion Injection into a Conjugated Polymer
We nd that conjugated polymers can undergo reversible structural phase transitions during electrochemical oxidation and ion injection. We study poly[2,5-bis(thiophenyl)-1,4-bis(2-(2-(2- methoxyethoxy)ethoxy)ethoxy)benzene] (PB2T-TEG), a conjugated polymer with glycolated side chains. Using grazing incidence wide angle X-ray scattering (GIWAXS), we show that, in contrast to previously known polymers, this polymer switches between two structurally distinct crystalline phases associated with electrochemical oxidation/reduction in an aqueous electrolyte. Importantly, we show that this unique phase change behavior has important physical consequences for ion transport. Notably, using moving front experi- ments visualized by both optical microscopy and super-resolution photoinduced force microscopy (PiFM), we show that a propagating ion front in PB2T-TEG exhibits non-Fickian transport, retaining a sharp step-edge prole, in stark contrast to the Fickian diusion more commonly observed. This structural phase transition is reminiscent of those accompanying ion uptake in inorganic materials like LiFePO4. We propose that engineering similar properties in future conjugated polymers may enable the realization of new materials with superior performance in electrochemical energy storage or neuromorphic memory applications.
Transport of ions in presence of induced electric field and electrostatic turbulence - Source of ions injected into ring current
The transport of ions from the polar ionosphere to the inner magnetosphere during stormtime conditions has been computed using a Monte Carlo diffusion code. The effect of the electrostatic turbulence assumed to be present during the substorm expansion phase was simulated by a process that accelerated the ions stochastically perpendicular to the magnetic field with a diffusion coefficient proportional to the energization rate of the ions by the induced electric field. This diffusion process was continued as the ions were convected from the plasma sheet boundary layer to the double-spiral injection boundary. Inward of the injection boundary, the ions were convected adiabatically. By using as input an O(+) flux of 2.8 x 10 to the 8th per sq cm per s (w greater than 10 eV) and an H(+) flux of 5.5 x 10 to the 8th per sq cm per s (w greater than 0.63 eV), the computed distribution functions of the ions in the ring current were found to be in good agreement, over a wide range in L (4 to 8), with measurements made with the ISEE-1 satellite during a storm. This O(+) flux and a large part of the H(+) flux are consistent with the DE satellite measurements of the polar ionospheric outflow during disturbed times.
Ion injection simulations of quasi-parallel shock re-formation
One-dimensional hybrid simulations are used to investigate the process of quasi-parallel shock reformation and to examine the coupling of a beam of ions reflected at the shock to the incoming solar wind. A simple simulation configuration is constructed that makes it possible to control the properties of the background plasma and of the reflected ions. The length and time scales for the coupling of the reflected ions to the background plasma are investigated as functions of the upstream magnetic field direction, beam density, and beam temperature. The coupling length and time scales are found to vary systematically with the upstream magnetic field direction. The coupling occurs at roughly the time and location where the injected ions become deflected transverse to the shock normal direction.
Solar wind ion injections in the morning auroral oval
Energy versus time dispersion of precipitating ion bursts was observed during two rocket flights in the morning auroral oval. Individual bursts lasted about 20 seconds and repeated on a time scale of 100 seconds. The dispersion is interpreted as energy-dependent time-of-flight delay which provides identification of ion charge-to-mass ratio as well as injection source distance. The data are consistent with injections of magnetosheath ions with injection distances ranging from 7 to 19 earth radii. Individual events extended over a regin of at least several degrees of magnetic longitude and 0.3 degrees of invariant latitude. It is suggested that these events are associated with turbulent plasma entry into the magnetospheric entry layer.
Effects of argon ion injections in the plasmasphere
In lifting massive space power system payloads from low Earth orbit to geosynchronous Earth orbit, Cargo Orbit Transfer (COTV) using ion propulsion will inject energetic beams of argon ions into the plasmasphere. The relationship of the beam velocity to Alfven and thermal velocities as a function of radial distance in the plasmasphere is given for positions near the Earth's equatorial plane. A beam sheath loss model is used which results in a deposition of argon ions and hence energy in the plasmasphere which is much less than that in models calling for clouds or plasma instabilities to rapidly stop the beam. A comparison is given of the cumulative fractional mass loss of an ion beam injected at 1.5 R for the ion cloud and the ion beam sheath loss process. The integrated difference of these two deposition models is shown for the construction of one SPS.
Initial assessment of the effects of energetic ion injections in the magnetosphere due to the transport of satellite power system components from low earth orbit to geosynchronous earth orbit
Potentially serious environmental effects exist when cargo orbital transfer vehicle (COTV) ion propulsion is used on the scale proposed in the preliminary definition studies of the Satellite Power System. These effects of the large scale injections of ion propulsion exhaust in the plasmasphere and in the outer magnetosphere were shown to be highly model dependent with major differences existing in the predicted effects of two models, the ion cloud model and the ion sheath model. The expected total number density deposition of the propellant Ar(+) in the plasmasphere, the energy spectra of the deposited Ar(+) and time dependent behavior of the Ar(+) injected into the plasmasphere by a fleet of COTV vehicles differ drastically between the two models. The ion sheath model was demonstrated to be applicable to the proposed Ar(+) beam physics if the beam was divergent and turbulent whereas the ion cloud model was not a realistic approximation for such a beam because the "frozen-field" assumption on which it is based is not valid.
Impulsive ion injection into the polar cusp
Impulsive bursts of positive ions were observed in the polar cusp during the rocket flights. Dispersion of arrival time with energy implies a modulation or acceleration region at a distance of 11 to 13 earth radii, presumably in the magnetosheath. The ion energy spectra closely match typical magnetosheath spectra. The bursts had a duration of about 20 s and repetition period on the order of 100 s. These results suggest that ions have intermittent rather than continuous entry at the polar cusps. At times, the ion and electron precipitations were anticorrelated in a manner consistent with a parallel electric field.
Transport of ions injected by AMPTE magnetotail releases
The BA and Li ions released in the magnetotail by the AMPTE IRM satellite were not observed in the inner magnetosphere with the AMPTE CCE satellite. In an effort to understand these results, Cladis and Francis (1988) modeled the expansion and ionization of the released atoms and computed several hundred guiding-center trajectories of the ions to sample the motion of each ion cloud. Here, the transport calculations are improved, principally by computing the full gyration motion of the ions in a more realistic model of the geomagnetic tail. The results indicate that the Ba(+) ions were convected inward along a narrow corridor, which was at least 2 earth radii away from the satellite in the case of the first Ba release and at least 3 earth radii away in the case of the second Ba release. Even if the ions had reached the satellite, their energies would have been too low to be detected. The Li(+) ions from both releases drifted inward over broad regions which overlapped the satellite in space and time. However, their fluxes at the satellite were somewhat too low to be detected.
Argon ions injected parallel and perpendicular to the magnetic field
Preliminary results are reported of measurements obtained with the 0-10-kHz electric-field plasma-wave receivers and single-particle ion detectors of the ARCS-3 sounding-rocket payload over the auroral oval on February 10, 1985, after downward/field-parallel or transverse-spiral injection of Ar ions from the accelerator subpayload (separating itself at 2.3 m/s). The data are presented graphically and briefly characterized. The waves induced by the parallel injections are found to be much weaker than those induced by the perpendicular injections. In addition to the expected response to the Ar beam, an ion flux at pitch angle 90 deg was detected during the second parallel injection.
Impulsive ion injections in the morning auroral region
Low altitude (less than 1000 km) measurements of ions precipitating into the morning auroral region are presented and analyzed. The ion fluxes exhibited time-energy signatures consistent with impulsive injection onto high-altitude field lines, followed by time-of-flight dispersion. The origin of these ions is investigated through the detailed examination of these signatures in conjunction with simultaneous measurements of precipitating electrons and a magnetic field model. A model is developed which indicates that the source for these particles was located in or near the magnetopause boundary layer, with the position deduced to be in the midlatitude flank region about 20-30 R(sub E) tailward of the Earth. The model explains the existence of multiple injections on a given field line as due to a quasi-periodic source, with the periodicity being about 100-200 s at the source. Several mechanisms are examined in an attempt to explain the injections, with a mechanism related to the propagation of waves on the surface of the boundary layer found to be the most plausible. The observations and results are compared to those of similar experiments and some unifying ideas are discussed.
Ion injection and acceleration in the polar cusp
This paper discusses cusp ion observations and their relationship to the morphology and dynamics of the polar cusp. Ion mass spectrometer data are used to illustrate the mixing of solar wind, ionospheric, and magnetospheric plasmas that occurs in the cusp.
Simulations of active ion injection experiments on ARCS 3
The ARCS 3 sounding rocket experiment used two argon guns oriented parallel and perpendicular to the geomagnetic field. The parameters of this experiment have been used in a series of particle simulations in order to interpret ion beam interaction with the multispecies ionospheric plasma. Along with the lower hybrid mode between the electron and the hydrogen gyrofrequencies, ion-ion hybrid modes between the hydrogen and helium gyrofrequencies and between the helium and oxygen gyrofrequencies are identified in the simulations. Besides these cold plasma modes, warm Bernstein modes of the respective ion species are identified. The parallel argon beam injections excite lower hybrid waves perpendicular to the magnetic field because of the finite thermal spread of the parallel beam. Perpendicular ion heating of background hydrogen, helium, and oxygen is comparable in the simulations. Comparisons are made with the wave and particle data from the ARCS 3 rocket experiment.