Search NASA⌕ Search

SEARCH · Search NASA

Results for “IRIDIUM 170”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

Nuclear Data Sheets for A=170☆

Nuclear structure data pertaining to all nuclei with mass number A=170 have been evaluated, and incorporated into the ENSDF data file. This evaluation supersedes the previous evaluation (Coral M. Baglin), Nuclear Data Sheets 96, 611 (2002), (cutoff date 15 August 2002) and subsequent updates of the ENSDF file for Yb to Dy (cutoff 15 April 2010), Lu (cutoff 8 October 1998), Pt (cutoff 17 February 1999) and Ta, Os (cutoff 7 April 1998). Since the previous evaluation, {sup 170}Gd has been observed and the ground state T{sub 1/2} measured. New excited states have also been observed in the neutron rich {sup 170}Dy. The ground state T{sub 1/2} of {sup 170}Tb has been determined, however, there are currently still no excited states observed in this nucleus. There remains some uncertainty in the ground state and longer-lived isomer in {sup 170}Ir which could warrent further experimental investigation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Rational Design of a Catalyst for the Selective Monoborylation of Methane

Combined computational and experimental studies elucidate the mechanism and suggest rational design and optimization strategies of a bis(phosphine)-supported iridium-catalyst for methane monoborylation. The activation of the C–H bond in methane via oxidative addition using tris(boryl) iridium(III) complexes bearing bis-chelating supporting ligands is modeled computationally. This model shows that the use of the soft Lewis base ligand such as 1,2-bis(dimethylphosphino)ethane (dmpe) lowers the activation barrier of the rate-determining step as it facilitates polarization of the metal-center, lowering the barrier of the oxidative addition to afford a seven-coordinate iridium(V) intermediate. The experimental optimization of this reaction using high-throughput methods shows that up to 170 turnovers can be achieved at 150 °C (500 psi) within 16 h using bis(pinacolato)diboron, a well-defined homogeneous and monomeric catalyst (dmpe)Ir(COD)Cl that is readily available from commercial precursors, with selectivity for the monoborylation product. High-boiling cyclic aliphatic solvents decalin and cyclooctane also prove suitable for this reaction, while being inert toward borylation. In accordance with the lower calculated activation barrier, catalytic turnover is also observed at 120 °C with up to 50 turnovers over the course of 4 days in cyclohexane solvent. Here, it was found that the borylation of methane is only achieved via one catalytic cycle, and buildup of pinacolborane, a side-product from methane borylation with bis(pinacolato)diboron, inhibits catalytic activity.

computational molecular modeling↗

Study of encapsulated {sup 170}Tm sources for their potential use in brachytherapy

Purpose: High dose-rate (HDR) brachytherapy is currently performed with {sup 192}Ir sources, and {sup 60}Co has returned recently into clinical use as a source for this kind of cancer treatment. Both radionuclides have mean photon energies high enough to require specific shielded treatment rooms. In recent years, {sup 169}Yb has been explored as an alternative for HDR-brachytherapy implants. Although it has mean photon energy lower than {sup 192}Ir, it still requires extensive shielding to deliver treatment. An alternative radionuclide for brachytherapy is {sup 170}Tm (Z=69) because it has three physical properties adequate for clinical practice: (a) 128.6 day half-life, (b) high specific activity, and (c) mean photon energy of 66.39 keV. The main drawback of this radionuclide is the low photon yield (six photons per 100 electrons emitted). The purpose of this work is to study the dosimetric characteristics of this radionuclide for potential use in HDR-brachytherapy. Methods: The authors have assumed a theoretical {sup 170}Tm cylindrical source encapsulated with stainless steel and typical dimensions taken from the currently available HDR {sup 192}Ir brachytherapy sources. The dose-rate distribution was calculated for this source using the GEANT4 Monte Carlo (MC) code considering both photon and electron {sup 170}Tm spectra. The AAPM TG-43 U1 brachytherapy dosimetry parameters were derived. To study general properties of {sup 170}Tm encapsulated sources, spherical sources encapsulated with stainless steel and platinum were also studied. Moreover, the influence of small variations in the active core and capsule dimensions on the dosimetric characteristics was assessed. Treatment times required for a {sup 170}Tm source were compared to those for {sup 192}Ir and {sup 169}Yb for the same contained activity. Results: Due to the energetic beta spectrum and the large electron yield, the bremsstrahlung contribution to the dose was of the same order of magnitude as from the emitted gammas and characteristic x rays. Moreover, the electron spectrum contribution to the dose was significant up to 4 mm from the source center compared to the photon contribution. The dose-rate constant {Lambda} of the cylindrical source was 1.23 cGy h{sup -1} U{sup -1}. The behavior of the radial dose function showed promise for applications in brachytherapy. Due to the electron spectrum, the anisotropy was large for r<6 mm. Variations in manufacturing tolerances did not significantly influence the final dosimetry data when expressed in cGy h{sup -1} U{sup -1}. For typical capsule dimensions, maximum reference dose rates of about 0.2, 10, and 2 Gy min{sup -1} would then be obtained for {sup 170}Tm, {sup 192}Ir, and {sup 169}Yb, respectively, resulting in treatment times greater than those for HDR {sup 192}Ir brachytherapy. Conclusions: The dosimetric characteristics of source designs exploiting the low photon energy of {sup 170}Tm were studied for potential application in HDR-brachytherapy. Dose-rate distributions were obtained for cylindrical and simplified spherical {sup 170}Tm source designs (stainless steel and platinum capsule materials) using MC calculations. Despite the high activity of {sup 170}Tm, calculated treatment times were much longer than for {sup 192}Ir.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Radiation transmission data for radionuclides and materials relevant to brachytherapy facility shielding

To address the limited availability of radiation shielding data for brachytherapy as well as some disparity in existing data, Monte Carlo simulation was used to generate radiation transmission data for {sup 60}Co, {sup 137}Cs, {sup 198}Au, {sup 192}Ir, {sup 169}Yb, {sup 170}Tm, {sup 131}Cs, {sup 125}I, and {sup 103}Pd photons through concrete, stainless steel, lead, as well as lead glass and baryte concrete. Results accounting for the oblique incidence of radiation to the barrier, spectral variation with barrier thickness, and broad beam conditions in a realistic geometry are compared to corresponding data in the literature in terms of the half value layer (HVL) and tenth value layer (TVL) indices. It is also shown that radiation shielding calculations using HVL or TVL values could overestimate or underestimate the barrier thickness required to achieve a certain reduction in radiation transmission. This questions the use of HVL or TVL indices instead of the actual transmission data. Therefore, a three-parameter model is fitted to results of this work to facilitate accurate and simple radiation shielding calculations.

61 RADIATION PROTECTION AND DOSIMETRY↗

Synthesis and Exploratory Catalysis of 3d Metals: Atom and Group-Transfer Reactions and the Activation and Functionalization of Small Molecules Including Greenhouse Gases

Determining ways to convert natural gas, with zero emissions, and to more value-added materials such as olefins is one of the main goals in my research group. Over this funding period, we explored the chemistry of early-transition metals with metal-nitrogen multiple bonds, specifically titanium and zirconium nitrides, and explored their redox properties, basicity and reactivity with small molecules including greenhouses gases such as carbon dioxide. Some of these work serve as inspiration for the chemistry of important materials such as uranium nitride along with its unprecedented basicity and ability to activate C-H bonds. Using robust chelating templates we also examined rare examples of trivalent group 4 transition metal ions, and studied these spectroscopically. Using early transition metal ions we also explored synthetic routes to new phosphide based products using the phosphaethynolate salt. In addition, we also explored the chemistry of ferrous systems, and redox active ligand that can allow us to reversibly break and make C-S as well as N-N bonds, activate dinitrogen forming unusual MNNM topologies. Our final component describes how we activate methane and dehydrocouple if with a carbene source to form ethylene. Using this information, we also discovered a simple to make iridium catalyst that activate and functionalize methane with 9:1 selectivity for mono-functionalization. We have established a pathway that leads to poisoning of the catalyst and have found optimal conditions for higher selectivity and with over 170 Turnovers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Nuclear Data Sheets for A = 168

Nuclear structure data pertaining to all nuclei with mass A=168 (Tb, Dy, Ho, Er, Tm, Yb, Lu, Hf, Ta, W, Re, Os, Ir, Pt) have been evaluated and incorporated into the ENSDF data file. This evaluation supersedes the previous publication (V.S. Shirley, Nuclear Data Sheets 71, 261 (1994) (literature cutoff date July 1993)) and subsequent ENSDF file revisions for Tb and Dy (C. Baglin, literature cutoff date of 15 June 1999) and Hf (B. Singh, literature cutoff date of 30 April 2001), and includes literature available by 15 June 2010. Since the above evaluations, the first excited states in {sup 168}Pt have been identified (1998Ki20, 2009Go16) and {alpha} decay from {sup 172}Hg has been observed (2009Sa27, 2004Ke06, 1999Se14). New levels in {sup 168}Dy have been excited using the {sup 170}Er({sup 82}Se,{sup 84}Kr{gamma}) reaction (2010So03). (HI,xn{gamma}) studies have significantly expanded our knowledge of level structure in {sup 168}Lu (1999Ka17, 2002Ha33), {sup 168}Ta (2008QiZZ), {sup 168}Yb (1995Fi01), {sup 168}Tm (2007CaZW), {sup 168}Hf (2009Ya21), {sup 168}Os (2001Jo11, 2009Od02) and, for {sup 168}Tm, important information has come also from (d,2n{gamma}) and ({alpha},n{gamma}) reactions (1995Si20). Revised decay schemes are available following new studies of {sup 168}Hf {epsilon} decay (6.7 min) (1997Ba26), {sup 168}Lu {epsilon} decay (1999Ba65), {sup 168}Ta {epsilon} decay (2007Mc08) and {sup 172}Au {alpha} decay (2009Ha42). Significant new information for {sup 168}Er is available from (p,t) (2006Bu09), (d,p) and (t,d) (1996Ma50), ({gamma},{gamma}') (1996Ma18), (136Xe, X{gamma}) (2010Dr02), ({sup 238}U,{sup 238}U{sup '{gamma}}) (2003Wu07) and (n,n{sup '{gamma}}) (1998Be20, 1998Be62) reactions, and the availability of {gamma}{gamma} coin data (1994Ju02, 1996Gi09) for the (n,{gamma}) E=thermal reaction has resulted in some significant level scheme revisions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Structure sensitivity of n -butane hydrogenolysis on supported Ir catalysts

Hydrogenolysis of alkanes has been widely reported as structure sensitive reaction on transition metal heterogeneous catalysts with metal particle sizes ranging between 1 and 20 nm. In this work, a series of Ir/MgAl 2 O 4 and Ir/SiO 2 catalysts with different Ir particle sizes ranging from subnanometer clusters (<1 nm) to nanoparticles (1–3 nm) were prepared and tested for n-butane hydrogenolysis. Our results show that the activity towards n-butane hydrogenolysis increases as Ir particle size increases in the lower particle size range, goes through a maximum at ~1.4–1.6 nm and then drops with a further increase in particle size. In this work, the product distribution at low temperature (170–190 °C) is dominated by central and terminal CAC bond cleavage of n-butane, and less by two CAC bond cleavage or further hydrogenolysis of the propane and ethane products. The selectivity to central CAC bond cleavage is highly dependent on the size of Ir and increases with a decrease in particle size down to ~1.4 nm but remains constant with further decrease in size. The results show that an Ir size of ~1.4 nm is optimum for n-butane hydrogenolysis activity and selectivity towards ethane.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗